Last night I took my pump all apart and decided to take another shot at
reseating the valves. Well, that did wonders! Now, I am at the other end of
the scale! Maybe, I should have made it a 1/8" ram, sure pumps a lot of
water. As long as I watch the bypass I don't fill that boiler up in abo
Norm:
Small Scale Steam Issue #3 has an article I wrote for an axle pump I
designed and installed on my Aster Mikado. I believe Dave Cole has some
drawings posted on this website.
Jim Curry
> Are there
> any companies offering a computer file to decal type of service? Ideally I'd
> like to email the file and get back the decals by FedEx. Is this in the realms
> of reality? If not what other methods do you use?
Keith (et al.), there are several choices for decals:
Rick Blanchard
[EM
In a message dated 11/25/01 5:01:31 PM Pacific Standard Time,
[EMAIL PROTECTED] writes:
<< I've since
fitted an engine driven feed pump geared off the Graham engine and the boiler
level and presrure keeps up with the steam demand of the Graham with cold
water
being fed in via the pump. >>
Fu
Keith,
I'm constructing the Kerr Stuart Brazil, G1. Do you have any suggestion or
drawings for an axle pump.
- Original Message -
>
> fitted an engine driven feed pump geared off the Graham engine and the
boiler
> level and presrure keeps up with the steam demand of the Graham with col
Micro-Mark at www.micromark.com offer an ink jet or laser decal film that makes the
process a D.I.Y. operation. Just
put it in the printer, print and cut out the finished decal.
Rich
On Sun, 25 Nov 2001 20:00:44 -0500, Keith Manison wrote:
-I need to do some lettering on a Class A Climax I'm
I need to do some lettering on a Class A Climax I'm completing. My penmanship is
appalling, but I have been able to generate what I need on computer. Are there
any companies offering a computer file to decal type of service? Ideally I'd
like to email the file and get back the decals by FedEx. Is t