opemmoko freerunner + debug board

Hi Guys, I have a freerunner + debug board along with all the accessories in mint condition which i am not using ( in UK). Please let me know if you are interested. Thanks Syed ___ support mailing list support@lists.openmoko.org https://lists.openmoko.o

RE: sd card?

On Tue, 2009-08-18 at 12:11 -0700, Russell Dwiggins wrote: > When I flashed the latest u-boot, I was able to boot again from an SD when I > couldn't after receiving the device back from SDG. I assumed that somehow > u-boot became corrupted. I don't think I've tried Qi since that time. I > don't

Re: sd card?

On Sun, 2009-07-26 at 21:20 -0700, undrwater wrote: > > > I am not 100% sure that it has worked > > at all since I got it back from buzzfix center. > >The card might have come loose in transport. Try taking it out and > putting it back in. > > -- > Rask Ingemann Lambertsen > Danish law requ

Re: Change NOR bootloader settings

... > You need debug board. (there is way to do it without debubo, but it's > rather hackish). > > Why do you want to edit NOR bootloader env? It's read-only by design, > to save you from bricking the device. > One reason would be having Qi in nand, but needing u-boot to boot a fatter kernel.

Re: Newbie introduces, and has problems

On Wed, 2009-07-15 at 08:46 -0400, François-Léonard Gilbert wrote: > > On the short term (1-2 weeks), I have 2 objectives: > a) get some GPS road nav program working (I have no preferences for > any program, AndNav looks good but it seems to be buggy) > b) get the phone calls working (stretc

Re: [Om 2009] X in grayscale after suspending (r4, testing)

On Fri, 2009-06-05 at 14:13 -0700, MicVM wrote: > > It seems to be a Qi Problem (I used > qi-s3c2442-1.0.2+gitr3b8513d8b3d9615ebda605de4bda18371aa3f359.udfu). I tried > also other distros and the same problem occurs. Before installing Om2009 I > had uBoot and it worked. Now i tried SHR with qi and

Re: The myth of missed phone calls (was: OM2008.12 - basic usage instructions?)

On Sun, 2009-05-10 at 15:00 +0200, Jeffrey Ratcliffe wrote: > > How can I verify the version of the firmware? > > Regards > > Jeff > In QtE it's under the modem tab of the hardware settings. Or you can use mickeyterm http://wiki.openmoko.org/wiki/OpenmokoFramework/mickeyterm I got the login

Re: The myth of missed phone calls (was: OM2008.12 - basic usage instructions?)

On Thu, 2009-04-23 at 05:33 +0200, Nicola Mfb wrote: > 2009/4/20 Daniel Willmann : > [...] > > I'm curious, what distro are you using? I would be pretty surprised if > > carrier differences are having that effect. > > May the gsm firmware influence that? > > Nicola > I know when I went from

Re: No sound in calls

Possibly. First I would check to make sure there is no sign of pulse audio on your system, just installing it always borked sound for me. Trying another kernel can't hurt and if it fixes it you'll know for sure, but maybe check your dmesg for anything suspicious. On Mon, 2009-02-23 at 15:37 -0500,

Re: Sad Story

On Tue, 2008-12-16 at 02:21 +0530, Karthik Kumar wrote: > See, I do understand that they've got their own pressures. But by merely > trying to work on GTA03 (hardware or software), it's like they've thrown > their hands off the GTA02. And that's not the right attitude towards > that either. I hope

Re: qtopia - kernel panic

Hi, This is the output of printenv on u-boot prompt. = GTA02v5 # printenv boot_menu_timeout=300 bootargs=roofstype=ext2 root=/dev/mmcblk0p2 console=tty0 console=ttySAC2,115200 loglevel=8 mtdparts=physmap-flash:-(n

Re: qtopia - kernel panic

of course, what did you expect? afair your root is ext3 and you set again ext2 rootfstype should read _ext3_ ... rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5 ... make sure that you got a recent u-boot. and please: do not simply hit reply and send but shorten the mails! I have even

Re: qtopia - kernel panic

TRy this if your kernel is on FAT and rootfs on ext3 setenv menu_9 Boot from microSD (FAT+ext3): setenv bootargs \${bootargs_base} rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5 \${mtdparts} ro\; mmcinit\; fatload mmc 1 0x3200 \${sd_image_name}\; bootm 0x3200 Rakshat ---

Re: qtopia - kernel panic

rakshat hooja wrote: Just to clarify - you are following these steps: 1) Boot Freerunner to Nand 2) Connect via USB cable on host 3) On host terminal giving the following commands: sudo chown uucp.uucp /dev/ttyACM0 followed by sudo cu -l /dev/ttyACM0 and you are getting

Re: qtopia - kernel panic

rakshat hooja wrote: Just to clarify - you are following these steps: 1) Boot Freerunner to Nand 2) Connect via USB cable on host 3) On host terminal giving the following commands: sudo chown uucp.uucp /dev/ttyACM0 followed by sudo cu -l /dev/ttyACM0 and you are getting

Re: qtopia - kernel panic

rakshat hooja wrote: On Fri, Aug 29, 2008 at 9:08 AM, syed yaqoob ali <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote: rakshat hooja wrote: On Wed, Aug 27, 2008 at 7:13 PM, arne anka <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:

Re: qtopia - kernel panic

rakshat hooja wrote: On Wed, Aug 27, 2008 at 7:13 PM, arne anka <[EMAIL PROTECTED] > wrote: >> I did connect to the cu using this command : cu -l /dev/ttyACM0 >But still the same response its going back to the menu Are you not getting the u-boot termi

Re: qtopia - kernel panic

arne anka wrote: I am trying to boot into the NAND uboot menu. But when i am selecting the set console to usb .It is returining back to the same menu again. you need to connect with cu or neocon or another terminal -- see http://wiki.openmoko.org/wiki/Bootloader#Bootloader_prompt

Re: qtopia - kernel panic

rakshat hooja wrote: On Wed, Aug 27, 2008 at 9:47 AM, syed yaqoob ali <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote: Yorick Moko wrote: On Tue, Aug 26, 2008 at 2:56 PM, syed yaqoob ali <[EMAIL PROTECTED]> <mailto:[EMAIL PROTECTED]> wrote:

Re: qtopia - kernel panic

Yorick Moko wrote: On Tue, Aug 26, 2008 at 2:56 PM, syed yaqoob ali <[EMAIL PROTECTED]> wrote: arne anka wrote: " Warning : unable to open an initial console" " Kernel panic - not syncing : no init found .try passing init= option to kernel" what file sy

Re: qtopia - kernel panic

en kernel is booting .It's giving kernel panic. Regards Syed Yaqoob Ali ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support

r(qtopia - kernel panic)

en an initial console" " Kernel panic - not syncing : no init found .try passing init= option to kernel" Regards Syed Yaqoob ali. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support

Re: dialer error(qtopia - kernel panic)

it= option to kernel" Regards Syed Yaqoob ali. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support

Re: dialer error

possbile with openemoko. It's not just an single application or something t . I might need to play with kernel for new device driver or play at application level wiht gtk + or other UI option available. Anyways could you guide me on my issues. Regards Syed Yaqoo

Re: dialer error

Michael Shiloh wrote: syed yaqoob ali wrote: Hi, I finally got the openmoko based neo freerunner phone.It's a bare phone nothing comes preloaded.I have some issues . 1)After booting the phone with all the proper hardware(sim / sdcard / batteries fully charge).I tried to make the

dialer error

Hi, I finally got the openmoko based neo freerunner phone.It's a bare phone nothing comes preloaded.I have some issues . 1)After booting the phone with all the proper hardware(sim / sdcard / batteries fully charge).I tried to make the call it’s poping error dialog with messaged ” Dialer error