On Tue, Aug 5, 2008 at 11:13 AM, Mikael Berthe
<[EMAIL PROTECTED]> wrote:
>
> * Torfinn Ingolfsen <[EMAIL PROTECTED]> [2008-08-04 23:55 +0200]:
> >
> > FWIW, I learned (from the community list I believe) som time ago that
> > you can use 'grep Bootloader /dev/mtdblock0' from a shell on the
> > Fre
Hi,
http://wiki.openmoko.org/wiki/Host-based_development_with_Xoo_and_Xephyrstates,
at the top:
"Note that there is a VMware image where this environment has been prebuilt
for you."
The page, however, doesn't link to any such image, thus my query: does
anyone here know of such an image, and if yes
On Thu, Aug 7, 2008 at 2:23 PM, arne anka <[EMAIL PROTECTED]> wrote:
>> standalone with the "moredrivers" config.
>>
>> ~ - git clone git://git.openmoko.org/git/kernel.git linux-2.6
>> ~ - git checkout origin/stable
>> ~ - edit ./build to point to your compiler path
>> ~ - cp defconfig-2.6.24 .conf
Hi,
After a sizeable hiatus while my laptop was down and out for repair,
I'm back on the Net and playing with my FreeRunner again. I'm trying
to install Python and related packages, but cannot find the packages.
According to http://wiki.openmoko.org/wiki/Python, ScaredyCat's repos
provide binary pa
On Sun, Aug 17, 2008 at 1:39 PM, Edgar D' Souza
<[EMAIL PROTECTED]> wrote:
> I still cannot get Python binary packages:
> Collected errors:
> * Failed to download
> http://buildhost.automated.it/OM2007.2/packages/armv4t/python-core_2.5.2-ml0_armv4t.ipk,
Hi,
Sorry, my bad -
On Sun, Aug 17, 2008 at 6:09 PM, Michael 'Mickey' Lauer
<[EMAIL PROTECTED]> wrote:
> Well, that's the problem with mixing feeds. Apparantly both your feeds have
> python packages with varying versions. I'd rather remove one feed.
Oh-oh... after getting my DNS lookups going again, I already install
On Fri, Aug 22, 2008 at 11:20 PM, Zack Mollusc
<[EMAIL PROTECTED]> wrote:
>> [EMAIL PROTECTED]:~# libgsmd-tool -m shell
>> libgsm-tool - (C) 2006-2007 by Harald Welte and OpenMoko, Inc.
>> This program is Free Software and has ABSOLUTELY NO WARRANTY
>>
>> rv
>> # # Get revision
>> revision: "HW: GT
On Tue, Aug 26, 2008 at 1:40 PM, syed yaqoob ali <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I have downloaded qtopia and after preparing sdcard ,installed the
> kernel and file system in the respective partitions.But when i m trying
> to boot thorough sdcard in qtopia . During kernel execution kernel
On Fri, Aug 29, 2008 at 2:38 PM, sparky mat <[EMAIL PROTECTED]> wrote:
>
> Can I get the source somewhere? 'zip source' isn't exactly a good search term
> :)
>>
>> I can't find any package named zip (apart from official feeds, i am using
>> feed from http://shr.bearstech.com/fso-unstable/ipk/armv
On Fri, Aug 29, 2008 at 3:07 PM, Edgar D' Souza
<[EMAIL PROTECTED]> wrote:
> Source: ftp://ctan.unik.no/tex-archive/tools/zip/info-zip/src/zip232.tar.gz
Ahgghh! Cannot connect to the site... sorry. Hopefully Arne's reply
solves
On Sun, Aug 31, 2008 at 6:41 PM, Andy Green <[EMAIL PROTECTED]> wrote:
> Sometimes when I use it on normal laptop, I get bogus DNS in UK.
You mean like if you use
host somedomain.com
on your Linux system, when using the modem as the DNS server, you get
complaints like "malformed response" etc.?
On Mon, Sep 1, 2008 at 9:31 AM, Ali <[EMAIL PROTECTED]> wrote:
>
> Hi,
>This is the output of printenv on u-boot prompt.
>
> =
> menu_1=Boot from microSD (FAT+ext2): setenv bootargs ${bootargs_base}
> rootfstype=ext
On Fri, Sep 5, 2008 at 8:59 AM, Dale Maggee <[EMAIL PROTECTED]> wrote:
> Hi,
>
> currently when I have my freerunner plugged into USB, it will charge to
> 100% and then start (slowly) discharging. If I unplug the USB cable and
> plug it back in, it charges back up to 100 percent, then starts
> disc
On Fri, Sep 5, 2008 at 12:15 PM, Dale Maggee <[EMAIL PROTECTED]> wrote:
> Yes, this sounds like the correct explanation - it stops charging once
> it hits 100%.
>
> When I have it unplugged, it SEEMS to discharge faster, but this may be
> due to usage
[...] I'll do some more testing by unplugging i
On Fri, Sep 5, 2008 at 9:07 PM, Mike Montour <[EMAIL PROTECTED]> wrote:
> That might be normal - the charger in the PCF50633 shuts off the charge
> current once the battery is full, and turns it on again when the voltage
> falls below a threshold. It seems that it can discharge quite a bit
> before
On Fri, Sep 5, 2008 at 8:13 PM, -stacy <[EMAIL PROTECTED]> wrote:
> I noticed the same thing, I have a short shell script that will cause it
> to start charging again with unpluging the USB cable.
>
> =
> #!/bin/sh
>
> chgmode=/sys
On Sun, Sep 7, 2008 at 5:07 AM, Offray Vladimir Luna Cárdenas
<[EMAIL PROTECTED]> wrote:
[...]
> usb0 Link encap:Ethernet direcciónHW 0E:8D:A0:04:CF:A4
> inet addr:192.168.0.200 Difusión:192.168.0.255
> Mask:255.255.255.0
> inet6 addr: fe80::c8d:a0ff:fe04:cfa4/64 Scope:Link
On Mon, Sep 8, 2008 at 3:03 PM, Bernhard Schauer
<[EMAIL PROTECTED]> wrote:
> Hi Ali,
>
> sorry for that delay, but I was on vacation last week. If this issue was not
> solved, I'd suggest to enter the following on bootscreen:
>
> setenv bootargs console=ttySAC2,115200 rootfstype=ext2 root=/dev/mmc
On Mon, Sep 8, 2008 at 6:08 PM, Bernhard Schauer
<[EMAIL PROTECTED]> wrote:
> Hi Ed,
>
> as ext2 is a subset of ext3 it is also mountable as ext2 (but then without
> journalling). It is required that the Filesystem was clean unmounted before
> to do that.
Hi Bernhard,
Wow - but earlier posts (in t
On Tue, Sep 9, 2008 at 1:08 AM, Thomas Bertani <[EMAIL PROTECTED]> wrote:
> I get this error on the second boot of qtopia (also openmoko) from the sd,
> why?
>
>
> debugfs dir creation failed -19
> unsupported configuration opcode: 3
> unsupported configuration opcode: 5
> kernel panic- not syncin
On Thu, Sep 11, 2008 at 6:42 PM, William Kenworthy <[EMAIL PROTECTED]> wrote:
> 1 out of every 3 or so nights, I wake up (~6-8hrs) and find the FR
> dead. :( Only GSM is running and its on dim&lock
>
> The battery is always fully charged when checked just before I retire.
>
> In some cases I have
On Fri, Sep 12, 2008 at 4:40 AM, William Kenworthy <[EMAIL PROTECTED]> wrote:
> Wrong bug - why does the FR SOMETIMES discharge to flat in only a few
> hours?
>
> No excessive current draw when checked, no apps running away, no
> anything that would seem to do it.
>
> Only leaves the gsm chip (that
On Sat, Sep 13, 2008 at 12:55 PM, michael irons <[EMAIL PROTECTED]> wrote:
> I was updating some packages in 2008 latest image when I thought my
> freerunner suspended. Probablem is is that it doesn't come back and won't
> reboot even by holing the power button.
>
> I can'teven get it to come up in
On Sun, Sep 14, 2008 at 3:09 PM, Christian Adams <[EMAIL PROTECTED]> wrote:
> ARGH!
> moin the 2nd
>
> my freerunner is back to life .. strange thing ..
> i just connected to my powerbook (as external pwr-source instead of
> wall-charger) and inserted battery and it turned on ..
Heh... I discovere
On Wed, Sep 17, 2008 at 5:21 PM, Tom Yates <[EMAIL PROTECTED]> wrote:
> [pid 1724] stat64("/home/root/.config/Trolltech.conf",
> {st_mode=S_IFREG|0600, st_size=4470, ...}) = 0
> [pid 1724] stat64("/opt/Qtopia/etc/default/Trolltech/qtmail_account.conf",
> 0xbefaed98) = -1 ENOENT (No such file or
On Wed, Sep 17, 2008 at 7:04 PM, Benedikt Schindler
<[EMAIL PROTECTED]> wrote:
> how could i check, if my system is realy booting the right kernel?
Does the info here help you?
http://wiki.openmoko.org/wiki/FAQ#How_do_I_find_out_what_image_versions_are_in_use_on_the_phone.3F
HTH
Ed.
he lists
>
> On Wed, 17 Sep 2008, Tom Yates wrote:
>
>> On Wed, 17 Sep 2008, Edgar D' Souza wrote:
>
>> > On Wed, Sep 17, 2008 at 5:21 PM, Tom Yates <[EMAIL PROTECTED]> wrote:
>> >> [pid 1724] stat64("/home/root/.config/Trolltech.conf",
Oh... heh... my next act is definitely to go look at this conf file
and edit it - perhaps I might finally get my media files found by
Qtopia! :-)
(Haven't had much time to play with the FR lately :-( )
Thanks
Ed.
On Wed, Sep 17, 2008 at 9:44 PM, <[EMAIL PROTECTED]> wrote:
> Now I understand why
On Fri, Sep 19, 2008 at 3:55 AM, Risto H. Kurppa <[EMAIL PROTECTED]> wrote:
> I've been using 2007.2 pretty much the whole time since I got the
> phone (tried, qtopia & debian but 2007.2 was most suitable for me).
> (openmoko-messages:1698): Gtk-WARNING **: gtk_widget_size_allocate():
> attempt to
Hi all,
I feel terribly lost without my old Palm PDA, which bit the dust some
time back - I used to have a mini-library on it :) Having exhausted
most of our little collection of hard-copy books re-reading them, I
tried out evince under 2008.8 on a couple of PDFs (that were A4
papersize, AFAIK) an
gt; elderly 0.8.2 (found ipk for it somewhere) didn't work nicely
>
> [1] http://www.fbreader.org/
> [2] http://wiki.openmoko.org/wiki/FBReader
>
> On Tue, 30 Sep 2008, Robin Paulson wrote:
>
>> 2008/9/30 Edgar D' Souza <[EMAIL PROTECTED]>:
>> > Hi all
On Fri, Oct 3, 2008 at 2:00 PM, Andy Green <[EMAIL PROTECTED]> wrote:
> In the factory, SD card is used for production, so it is 100% tested
> (and fairly unlikely to die).
As in, in the phone, or put in a card reader to verify it's working,
or something else? No, this isn't important, I'm just cu
On Fri, Oct 3, 2008 at 5:35 PM, Andy Green <[EMAIL PROTECTED]> wrote:
> | As in, in the phone, or put in a card reader to verify it's working,
> | or something else? No, this isn't important, I'm just curious :-)
>
> As in the phone, we use SD Card boot to hold the production test software.
That's
33 matches
Mail list logo
