Graham Beneke wrote:
Hi
I have an openVPN connection to a VPN server and i have a single IP from
the server. I need to NAT my local subnet before putting the traffic
over the VPN.
I'm not so clued up on custom config files but it looks like I can do
everything that I need to in the
Wally Mono wrote:
Wally Mono wrote:
I am continuously getting these:
kernel: pid # (rrdtool), uid 0: exited on signal 11 (core dumped)
about 1 a minute. Any ideas why? More importantly how do I make it stop?
I'm running:
1.2-RC2 built on Fri Aug 17 17:46:06 EDT 2007multi-wan.
Wally Mono wrote:
I realize this is bad form, but how do I actually get someone to
respond to an apparent problem? I tried the contact on the web page
and was referred here. What other hoops must I jump through to get
someone to give me what probably amounts to a very simple answer? All
due
-Original Message-
From: Andrew Cotter [mailto:[EMAIL PROTECTED]
Sent: Tuesday, October 16, 2007 3:12 PM
To: support@pfsense.com
Subject: [pfSense Support] Watchguard X series platform
Hello,
I have seen a number of posts both here and on the M0n0wall
list about the older
On Mon, Oct 29, 2007 at 10:34:20AM -0400, Andrew Cotter wrote:
Well I got no response so I went out and picked a Watchguard X500 up off of
You got at least a response from me. From the look of it, how is it better
than ALIX?
ebay. I am happy to report that once you crack the thing open there
On 10/29/07, Wally Mono [EMAIL PROTECTED] wrote:
I realize this is bad form, but how do I actually get someone to respond
to an apparent problem? I tried the contact on the web page and was
referred here. What other hoops must I jump through to get someone to
give me what probably amounts to a
On Oct 29, 2007, at 11:37 AM, Eugen Leitl wrote:
I'm going to remove the CFs from my twin mini-ITXen, and substitute
them
I just replaced the CF adapter thingy from my mini-ITX box and
replaced it with one of these, so upgrade are trivial -- just swap CF
cards from the back of the box.
On Mon, Oct 29, 2007 at 12:36:48PM -0400, Vivek Khera wrote:
I just replaced the CF adapter thingy from my mini-ITX box and
I have something like that, hotglued inside the cases. It's not
really a hassle.
replaced it with one of these, so upgrade are trivial -- just swap CF
cards from
I am in kind of the same boat. If you can get the Watchguard appliance to
work with pfsense that would be pretty cool, but I bet it will drive up the
cost of the units on Ebay :)I have been looking at the machines on
hacom.net as well. They have some pretty good candidate machines for
Im a couple months off from trying this
http://www.abmx.com/1u-12inch-deep-mini-server-p-287.html
Im debating on whether to throw a 4 NIC intel in the PCI slot or try the 3
NIC card they can add (that doesnt use up the PCI slot either)
Itll use the re driver (its a Realtek RTL8110S) - and
Rainer Duffner wrote:
Wally Mono wrote:
I realize this is bad form, but how do I actually get someone to
respond to an apparent problem? I tried the contact on the web page
and was referred here. What other hoops must I jump through to get
someone to give me what probably amounts to a very
Am 30.10.2007 um 00:39 schrieb Wally Mono:
Rainer,
Thanks so much for your response.
To be clear, I am running the live cd version, so there is nothing
to re-install. Are you saying just reconfigure from scratch? Would
this imply some sort of corruption in the configuration file?
12 matches
Mail list logo
