On Sun, Oct 4, 2009 at 2:15 PM, Anil Garg wrote:
> I have a pfsense with two 10/100 PCI cards (acting as LAN & WAN router).
> I have a 4 port (quad) 10/100 PCI (ZNYX ZX374) card.
> If I were to add this card into the box and then add those ports and bridge
> them with each other (completely away f
On Sun, Oct 4, 2009 at 9:24 PM, Anil Garg wrote:
> David
>
> I am not very technical. My server room is far away from my internet
> connection at my home. So there is only one cable going from the internet to
> server room. I am still reading about VLAN so that I understand its working
> better.
David
I am not very technical. My server room is far away from my internet connection
at my home. So there is only one cable going from the internet to server room.
I am still reading about VLAN so that I understand its working better.
Anil
From: David Bur
On Fri, Oct 2, 2009 at 9:25 AM, Jure Pečar wrote:
>
> If anyone is going to dig this in the archives, here is the simplest way:
>
> * download http://docs.real.com/docs/proxykit/osrtspproxy_2_0.tar.gz
> * patch with patches from
> http://www.grogy.com/local_doc/www/apache22/data/ports/net/osrtspp
On Fri, Oct 2, 2009 at 3:43 PM, Borowicz, Paul
wrote:
> I am 1.2.3-RC3
> built on Mon Sep 14 02:04:35 UTC 2009
>
> I have a DMZ, WAN, and LAN on this box. I have been getting bleed through
> from the DMZ to the LAN and vice versa.
>
> I have a WAN rule, all stars except destinaition is DMZ net
>
On Sun, Oct 4, 2009 at 6:15 PM, Anil Garg wrote:
> I have a pfsense with two 10/100 PCI cards (acting as LAN & WAN router).
> I have a 4 port (quad) 10/100 PCI (ZNYX ZX374) card.
> If I were to add this card into the box and then add those ports and bridge
> them with each other (completely away f
2009/10/4 ozan ucar :
> Hi everyone,
> I have a alix 2d13 onboard.I need installation pfsense 1.2.3 on ide disk.
>
> http://forum.pfsense.org/index.php/topic,13509.0.html
> I'm installation change config.xml for nic lan wan and edit
> /etc/fstap and replace all disk name ad0 .
>
> system when boo
This is really a weird setting!
You are using a board that has been created and design to work with
Compact Flash.
I think It is a bit "strange" to try to use It with an IDE drive.
I would suggest that you use an embedded image as described in here:
http://blog.pfsense.org/?p=472
Then you c
On Sun, Oct 4, 2009 at 2:59 PM, Apostolis Sotiropoulos
wrote:
> Hi to all,
>
> I want to have a transparent squid proxy on a box which is in the same
> subnet with the pf lan.
> So i'm adding a nat to forward all traffic to 80 in the squids port but that
> makes a loop for the squids box traffic.
Your Switch should have the "trunking feature": 802.1Q
Best Choice for small Switches is Netgear (Many Models in all Categories)
Take a look at the category "Managed Switches"
Support for Layer 2 (3 is with routing functionality, not important for
you)
Start searching here:
http://www.netgear.c
Hi to all,
I want to have a transparent squid proxy on a box which is in the same
subnet with the pf lan.
So i'm adding a nat to forward all traffic to 80 in the squids port but
that makes a loop for the squids box traffic. Is there a rule so i don't
include traffic from that host?
Thanx in
I have a pfsense with two 10/100 PCI cards (acting as LAN & WAN router).
I have a 4 port (quad) 10/100 PCI (ZNYX ZX374) card.
If I were to add this card into the box and then add those ports and bridge
them with each other (completely away from LAN WAN) will those four ports act
like a VLAN capab
Hi,
the ath(0) "atheros" driver with my D-Link DWL-G520 PCI WLAN-Card supports
these three types:
- Infrastructure (BSS)
- Ad-Hoc (IBSS)
- Access Point
So it should work for your ;-)
Best regards.
Ralf
-Original Message -
Date: Sat, 03 Oct 2009 18:41h
From: "Joseph L. Casale"
To: "
Hi everyone,
I have a alix 2d13 onboard.I need installation pfsense 1.2.3 on ide disk.
http://forum.pfsense.org/index.php/topic,13509.0.html
I'm installation change config.xml for nic lan wan and edit
/etc/fstap and replace all disk name ad0 .
system when booting an error message ;
- http:/
14 matches
Mail list logo