I am now running a 2.0 Snapshot (latest) and loving what the team has done with
2.0.x
Amazing!
My question today rests around the Squid VideoCache instructions located here:
http://doc.pfsense.org/index.php/Setup_VideoCache_with_Squid#Install_VideoCache
At present many of the instruction
Hi all,
I have a pfSense 1.2.3 box running squid, when I tried to upgrade (reinstall
the package) from version 2.7.9_4 to the latest 2.7.9_4.1, it didn't
complete the process, was removed from the services GUI but it's still in
the Installed Packages. I reboot the box, tried to remove the
Although unlikely, that could be symptomatic of bad RAM. Still amazes me that
no-one seems to see the necessity for ECC RAM in networking gear.
It's unlikely that such a problem would cause such an isolated, specific
symptom, however.
-Adam
Volker Kuhlmann hid...@paradise.net.nz wrote:
I've had this happen several times now. Large files end up having
single-byte corruptions spread through the file. The problem is related
to squid - turning it off makes the corruptions disappear.
squid configured as transparent proxy, no user authentication.
maximum_object_size_in_memory 32 KB
Hi,
I'm having exactly the same problem. I tried the same workaround of Country
Block, by removing the .log file of squidguard package in /tmp, then fresh
install the package, booted the box, but the problem persists.
Carlos
On Thu, Mar 31, 2011 at 3:02 AM, Volkan VURAL volk...@gmail.com wrote:
On 3/30/2011 10:02 PM, Volkan VURAL wrote:
Squid+squidguard randomly stop filtering and pass all traffic. (pfsense
1.2.3, squid 2.7.9_4, squidGuard 1.4_3 pkg v.1.9) ...
But another my pfsense system (pfsense 1.2.3, squid 2.7.9_4, squidGuard
1.3_1 pkg v.1.9) working good.
When i add new
Hi,
Squid+squidguard randomly stop filtering and pass all traffic. (pfsense
1.2.3, squid 2.7.9_4, squidGuard 1.4_3 pkg v.1.9) ...
But another my pfsense system (pfsense 1.2.3, squid 2.7.9_4, squidGuard
1.3_1 pkg v.1.9) working good.
When i add new squidguard packet than squid and squidguard not
Dear all,
I have a working LDAP server ( tested with JXplorer )and i am trying to use
squid with LDAP following information provided but working any idea???
Authentication method :LDAP
LDAP V:3
Authentication server :10.1.1.25
Authentication server port :389
LDAP server user DN :
Hi Shali,
Take a look at this forum post, it helped me resolve this problem.
http://forum.pfsense.org/index.php?topic=20666.0
Kind Regards,
Dominic.
On Thu, Mar 17, 2011 at 11:03 AM, Shali K.R. sh...@vidyaacademy.ac.in wrote:
Dear all,
I have a working LDAP server ( tested with JXplorer
Dear Domanic sir,
after searching several topics i have changed my settings as ,
Authentication method :LDAP
LDAP V:3
Authentication server :10.1.1.25
Authentication server port :389
LDAP server user DN : ou=people,dc=lan,dc=com
LDAP base domain : dc=lan,dc=com
LDAP username DN attribute :uid
Hi Shali,
Sorry I am still using 1.2.3, perhaps someone else on the list using
2.0 can advise?
I will be doing a test with 2.0 tomorrow and should I find something I
will let you know.
On Thu, Mar 17, 2011 at 1:17 PM, Shali K.R. sh...@vidyaacademy.ac.in wrote:
Dear sir,
Actually i am using
Dear all,
i added 51200 ( 50 MB) in Maximum download size of proxy page but its not
working i checked squid.conf file it shows
reply_body_max_size 52428800 allow all but i can download large files. is
there any way to configure it properly
--
Thanks Regards
Shali K R
Server Administrator
) . deny
all\n;
Then configure and save again !
Regards,
Martin !
Von: Shali K.R. [mailto:sh...@vidyaacademy.ac.in]
Gesendet: Freitag, 7. Januar 2011 10:17
An: support@pfsense.com
Betreff: [pfSense Support] Squid traffic management Maximum download size not
working
Dear all,
i added 51200
. Januar 2011 10:17
*An:* support@pfsense.com
*Betreff:* [pfSense Support] Squid traffic management Maximum download
size not working
Dear all,
i added 51200 ( 50 MB) in Maximum download size of proxy page but its not
working i checked squid.conf file it shows
reply_body_max_size 52428800
:)
Von: Shali K.R. [mailto:sh...@vidyaacademy.ac.in]
Gesendet: Freitag, 7. Januar 2011 11:39
An: support@pfsense.com
Betreff: Re: [pfSense Support] Squid traffic management Maximum download size
not working
Thank you sir its working fine now
On Fri, Jan 7, 2011 at 4:00 PM, Fuchs, Martin
2011/1/6 Koray AGAYA insanad...@gmail.com:
I need to MAC adresses because for details logs each computers How can I do
Please help
force each computer to have a fixed IP address.
-
To unsubscribe, e-mail:
On 4 January 2011 13:53, Koray AGAYA insanad...@gmail.com wrote:
Hi,
Can I add computers mac adresses ( squid logs ) is it possible ?
Thank you for everything
Hello Koray,
You've already asked this question once, without anyone replying.
There's no need for a second e-mail with the same
On Tue, Jan 4, 2011 at 8:53 AM, Jostein Elvaker Haande
jehaa...@gmail.comwrote:
On 4 January 2011 13:53, Koray AGAYA insanad...@gmail.com wrote:
Hi,
Can I add computers mac adresses ( squid logs ) is it possible ?
Thank you for everything
Seeing as I'm a bit on the generous side
Quoting Koray AGAYA (from 05/01/11 01:53):
Can I add computers mac adresses ( squid logs ) is it possible ?
If the computers in question are on the same subnet as the squid server,
then it is *possible* but I don't know how to configure it in pfSense.
If they are on a different subnet, then
Hi,
Thank you for solutaion I have a question another one :)) Can I add mac
adresses PC's this log ( squis logs ) is it possible ?
Thank you for everything
On Tue, Dec 21, 2010 at 7:44 PM, Luis G. Coralle luiscora...@gmail.comwrote:
2010/12/21 Koray AGAYA insanad...@gmail.com
Hi
Where
Hi
Where can I change log time format ? Which file ? I didint found. Can you
help me please ! this log time 1292930146.341 format is UNIX
Anybody want to change UNIX log format change as below
OLD LINE
%ts.%03tu %6tr %a %Ss/%03Hs %
NEW LINE
%tl %6tr %a %Ss/%03Hs %
*1292930146.341*429
2010/12/21 Koray AGAYA insanad...@gmail.com
Hi
Where can I change log time format ? Which file ? I didint found. Can you
help me please ! this log time 1292930146.341 format is UNIX
Anybody want to change UNIX log format change as below
OLD LINE
%ts.%03tu %6tr %a %Ss/%03Hs %
NEW LINE
Hi list,
The subject speaks by itself : I have a buch of servers within a dmz
network and a lan.
I would like to redirect the port 80 (outgoing http connections) on lan
to 3128 (squid transparent) on dmz.
I'd like to do that without manually modifying the pf.conf. Is there a
way to do such a
I would install the squid package on pfsense and tell it to forward to an
upstream proxy.
Curtis LaMasters
On Nov 25, 2010 7:08 AM, Jigar SOLANKI sol4...@gmail.com wrote:
Hi list,
The subject speaks by itself : I have a buch of servers within a dmz
network and a lan.
I would like to redirect
Hi,
Thanx for the reply.
Actually, i already have an OpenBSD running in the dmz network (squid is
already on this server).
I dont want to install the squid package on my pfsense firewall because it's my
network entry point, so it is dedicated only to TCP/IP Level 3/4 firewalling,
it sees a
You should be able to do it using Port Forwarding in the NAT settings.
Just set up a rule in there to redirect LAN traffic on port 80 to the
desired location.
Attached is a picture of my settings. I am using non-transparent proxying
so mine is set up that all traffic to port 80 that is not to
Hi List Peoples :)
I'm wondering if someone can give me some pointers about getting Squid
and squidGaurd up and running on pfSense 2.0? I tried to install it
once from the package manager and it killed pfSense ;) (I have pfSense
as a VM and upon boot up it would display the following error [0]
James Bensley wrote:
Hi List Peoples :)
I'm wondering if someone can give me some pointers about getting Squid
and squidGaurd up and running on pfSense 2.0? I tried to install it
once from the package manager and it killed pfSense ;) (I have pfSense
as a VM and upon boot up it would display
I have been running Squid and SquidGuard on pfSense 2.0 Beta4 for the past
three weeks with no trouble. I installed from the package manager with no
problems.
Moshe
--
Moshe Katz
KatzNet Computers
-- mo...@ymkatz.net
-- +1(301)867-3732
On Mon, Nov 1, 2010 at 7:05
Well I have donwloaded an installed a newer image and now its working
just fine :)
So back to my original post, is there anyway I can now force all HTTP
and HTTPS traffic through my Squid and squidGuard service? Like a
captive portal or transparent proxy? (Or a mix of both were unknown
users are
Sorry for the noise, I've opened my mouth too soon :)
http://doc.pfsense.org/index.php/Setup_Squid_as_a_Transparent_Proxy
--
Regards,
James.
http://www.jamesbensley.co.cc/
There are 10 kinds of people in the world; Those who understand
Vigesimal, and J others...?
Hy All,
I have Pfsense 1.2.2 with Squid 2.7.9 stable on it.Squid is in Transparent
mode. I have a cache of 60GB. Sometimes, my LAN clients are unable to access
some URLs. But whenever I bypass the IP address from Proxy, everything works
like a charm. Dont know the exact issue. Now this
Hi,
I am having trouble getting Squid in pfSense 1.2.3 to authenticate
against a 2003 Active Directory.
Can anyone perhaps share some light on their config for this?
I either get the authentication popup returning (authentication
failure?) or a browser window saying
the page is currently
Hi,
I managed to resolve this, upgraded Squid to the Squid3 package and then
upgraded the
openldap-client package (openldap-client-2.4.11).
The openldap update was the primary fix but not keen to mess with it now
and revert back
on Squid version...
Hope this helps someone else, if not at
I know this has been asked several times and I have searched but came up
with no solid answers. We're running PFsense as our FW + Squid as a web
cache for a fairly large school district. We're migrating away from our
paid content filtering solution and are looking at Dans guardian. I
realize that
If you are wanting to integrate with AD, you will not want to use the
pfSense package. You would be better served setting up squid and DG on
a separate box and using a GPO to enforce proxy settings on your LAN
clients. You can then further enforce your site policy by only allowing
web
AD is not really a deal breaker for us, bypass accounts/page is however.
Jason James
Technology Department
School District of Milton
608-868-9570 ext 1082
-
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For
: Friday, January 22, 2010 5:25 AM
To: support@pfsense.com
Subject: [pfSense Support] Squid Stopping
HI guys,
I'm having problems with the PFsense in version 1.2.2 in one of my clients.
There are more or less installed pfsense squid 2.7.8.1 ,with squidguard+
1.3.2, and load balance 2 adsl links
HI guys,
I'm having problems with the PFsense in version 1.2.2 in one of my clients.
There are more or less installed pfsense squid 2.7.8.1 ,with squidguard+
1.3.2, and load balance 2 adsl links. There are 2 days behind the pfsense
caught when he called again and had lost all settings. I did
Before anything else, I would suggest upgrading the most current
release. 1.2.3 has been out and stable for a long time.
Rafael Cristian wrote:
HI guys,
I'm having problems with the PFsense in version 1.2.2 in one of my
clients. There are more or less installed pfsense squid 2.7.8.1 ,with
On Thu, Jan 7, 2010 at 4:27 AM, Jonathan Dieter jdie...@gmail.com wrote:
What is the best way to rebuild squid for 2.0-Beta1? The current
package is build with libcrypt.so.4, while libcrypt.so.5 is in 2.0-Beta1
and it's also asking for libssl, which doesn't seem to be installed at
all in
On Fri, 2010-01-08 at 05:07 -0500, Chris Buechler wrote:
On Thu, Jan 7, 2010 at 4:27 AM, Jonathan Dieter jdie...@gmail.com wrote:
What is the best way to rebuild squid for 2.0-Beta1? The current
package is build with libcrypt.so.4, while libcrypt.so.5 is in 2.0-Beta1
and it's also asking
What is the best way to rebuild squid for 2.0-Beta1? The current
package is build with libcrypt.so.4, while libcrypt.so.5 is in 2.0-Beta1
and it's also asking for libssl, which doesn't seem to be installed at
all in 2.0-Beta1.
Jonathan
signature.asc
Description: This is a digitally signed
Wow, it works. Thank you so much. When you came to Brazil you'll have a
place to stay.
2009/12/11 Jim Pingle li...@pingle.org
[Please try not to top post, especially when others in the thread are
not top posting]
On 12/11/2009 6:28 PM, Nathaniel Simch de Morais wrote:
2009/12/11 Jim
Hello,
I wanted to know if It was Ok to install SquidGuard package with an embedded
version of pfSense working on NanoBSD ?
I plan to deploy It on Alix board… As the system is mounted RO… I am not
certain this will be the best settings.
Will this still be ok - or do you have any other
On 12/11/2009 5:21 AM, bsd wrote:
I wanted to know if It was Ok to install SquidGuard package with an embedded
version of pfSense working on NanoBSD ?
I plan to deploy It on Alix board… As the system is mounted RO… I am not
certain this will be the best settings.
Will this still be ok -
Hi all
I have a problem with my pfsense and already changed my machine but the
problem still.
Well, i can make any changes in squid, but in the tab Cache management
just don't save. I put all info about cache i want and when i click save
the screen returns to default.
Does anyone seen this?
On Fri, Dec 11, 2009 at 3:52 PM, Nathaniel Simch de Morais
nathanielmor...@gmail.com wrote:
Well, i can make any changes in squid, but in the tab Cache management
just don't save. I put all info about cache i want and when i click save
the screen returns to default.
Does anyone seen this?
I
I'm using firefox 3.5.5
2009/12/11 David Burgess apt@gmail.com
On Fri, Dec 11, 2009 at 3:52 PM, Nathaniel Simch de Morais
nathanielmor...@gmail.com wrote:
Well, i can make any changes in squid, but in the tab Cache management
just don't save. I put all info about cache i want and
On 12/11/2009 5:52 PM, Nathaniel Simch de Morais wrote:
Hi all
I have a problem with my pfsense and already changed my machine but the
problem still.
Well, i can make any changes in squid, but in the tab Cache management
just don't save. I put all info about cache i want and when i click
Hi,
Is there a way I can set Squid to route all traffic via OPT1 instead of
my WAN interface?
Any help on this would be appreciated.
Thank you,
Dominic.
Is there a way I can set Squid to route all traffic via OPT1 instead of my WAN
interface?
You said it yourself, set squid to route... More info on your topo would be
needed to say exactly
how to do it. You can define a route on your Linux box to push all outbound
traffic to a gateway defined
hi all,
any reason (or what can i look at) to see why squid transparent proxying
is heavily slowing web access ... (w/out proxy, dell.fr takes 3-5 secs,
with proxy, dell.fr takes 20+ or more)
running latest stable version in a vmware virtual machine with nice
hardware.
thanks
mcq
Simply bypass this website from squid..make your squid to do not cache any
content of this site...
On Thu, Oct 1, 2009 at 12:38 PM, mayak chunder-qwern
ma...@australsat.comwrote:
hi all,
any reason (or what can i look at) to see why squid transparent proxying
is heavily slowing web access
On Thu, Oct 1, 2009 at 17:38, mayak chunder-qwern ma...@australsat.com wrote:
any reason (or what can i look at) to see why squid transparent proxying
is heavily slowing web access ... (w/out proxy, dell.fr takes 3-5 secs,
with proxy, dell.fr takes 20+ or more)
Are you using Squid for caching?
On Thu, 2009-10-01 at 10:33 +0100, Paul Mansfield wrote:
On 01/10/09 08:38, mayak chunder-qwern wrote:
hi all,
any reason (or what can i look at) to see why squid transparent proxying
is heavily slowing web access ... (w/out proxy, dell.fr takes 3-5 secs,
with proxy, dell.fr takes 20+
I assume you're retyping the config rather than giving us
grep -v ^# squid.conf
you sure the cache size 1500 is 1500MB and not 1500KB? is it using
sufficient disk space? if the disk cache is too small it'll be pointless
having it.
also, have you turned logging level up too far, if you log
On Thu, 2009-10-01 at 14:02 +0100, Paul Mansfield wrote:
I assume you're retyping the config rather than giving us
grep -v ^# squid.conf
you sure the cache size 1500 is 1500MB and not 1500KB? is it using
sufficient disk space? if the disk cache is too small it'll be pointless
having it.
mayak chunder-qwern wrote:
hi all,
any reason (or what can i look at) to see why squid transparent proxying
is heavily slowing web access ... (w/out proxy, dell.fr takes 3-5 secs,
with proxy, dell.fr takes 20+ or more)
running latest stable version in a vmware virtual machine with nice
On Thu, Oct 1, 2009 at 7:57 AM, Jim Pingle li...@pingle.org wrote:
mayak chunder-qwern wrote:
hi all,
any reason (or what can i look at) to see why squid transparent proxying
is heavily slowing web access ... (w/out proxy, dell.fr takes 3-5 secs,
with proxy, dell.fr takes 20+ or more)
My
On Thu, 2009-10-01 at 08:18 -0600, David Burgess wrote:
On Thu, Oct 1, 2009 at 7:57 AM, Jim Pingle li...@pingle.org wrote:
mayak chunder-qwern wrote:
hi all,
any reason (or what can i look at) to see why squid transparent proxying
is heavily slowing web access ... (w/out proxy, dell.fr
From: rakthu...@advanceagro.com
To: support@pfsense.com
Date: Wed, 3 Jun 2009 13:38:35 +0700
Subject: [pfSense Support] Squid package installed
Hello all
Sorry to disturb again. I install squid package and it's say
installation completed but I can find any package
Have you tried in Services/Proxy Server?
On Wed, Jun 3, 2009 at 3:38 AM, Rakthum_NetworkTelecom_IP#1
rakthu...@advanceagro.com wrote:
Hello all
Sorry to disturb again. I install squid package and it's say
installation completed but I can find any package
in Installed packages and it
: Re: [pfSense Support] Squid package installed
Have you tried in Services/Proxy Server?
On Wed, Jun 3, 2009 at 3:38 AM, Rakthum_NetworkTelecom_IP#1
rakthu...@advanceagro.com wrote:
Hello all
Sorry to disturb again. I install squid package and it's say
installation completed but I can
Hello all
Sorry to disturb again. I install squid package and it's say
installation completed but I can find any package
in Installed packages and it still show Unable to retrieve package info
from www.pfsense.com. Cached data will be used.
what's it mean?
Thank you.
Hmmm,... sounds interesting...
-Ursprüngliche Nachricht-
Von: Gary Buckmaster [mailto:g...@centipedenetworks.com]
Gesendet: Freitag, 13. März 2009 14:52
An: support@pfsense.com
Betreff: Re: AW: [pfSense Support] Squid authentication against AD.
Fuchs, Martin wrote:
Would only
Hi,
Has anyone managed to successfully setup pfsense+squid to authenticate
Windows users automatically
against AD, ie: based on their Windows domain signon and not prompting
for user/pass when using proxy?
Any help regarding this will be appreciated.
Thank you,
Wayne.
Wayne Langdon wrote:
Hi,
Has anyone managed to successfully setup pfsense+squid to authenticate
Windows users automatically
against AD, ie: based on their Windows domain signon and not prompting
for user/pass when using proxy?
Any help regarding this will be appreciated.
Thank you,
Wayne.
: [pfSense Support] Squid authentication against AD.
Hi,
Has anyone managed to successfully setup pfsense+squid to authenticate Windows
users automatically
against AD, ie: based on their Windows domain signon and not prompting for
user/pass when using proxy?
Any help regarding this will be appreciated
@pfsense.com
*Betreff:* [pfSense Support] Squid authentication against AD.
Hi,
Has anyone managed to successfully setup pfsense+squid to authenticate
Windows users automatically
against AD, ie: based on their Windows domain signon and not prompting
for user/pass when using proxy?
Any help
Hello People,
Is that LDAP AUTH working at PFSense SQUID MODULE?
I tried a lot of times to configure that without sucess...
I'm using a Win2003Standard Active Directory to authenticate.
Here is my config sample:
Authentication mode:LDAP
LDAP version 3
ideas
http://www.papercut.com/kb/Main/ConfiguringSquidProxyToAuthenticateWithActiveDirectory
On Mon, Feb 16, 2009 at 11:51 PM, Fabricio Ferreira gu...@bol.com.brwrote:
*Hello People,*
*Is that LDAP AUTH working at PFSense SQUID MODULE?*
*I tried a lot of times to configure that without
:40
An: support@pfsense.com
Betreff: [pfSense Support] Squid / swap.state issue
Hi,
Yesterday I encountered a concerning problem with my pfSense 1.2 box. I
added a site to my Squid access list to be
blocked which worked perfectly. However shortly thereafter users where
unable to use the proxy
Hi,
Yesterday I encountered a concerning problem with my pfSense 1.2 box. I
added a site to my Squid access list to be
blocked which worked perfectly. However shortly thereafter users where
unable to use the proxy (all sites timedout).
Disabling the proxy worked fine. When I disabled the
On Tue, Dec 9, 2008 at 00:21, Wayne Langdon [EMAIL PROTECTED] wrote:
Has anyone setup pfsense / squid to automatically authenticate Windows users
based on their domain login rather
than prompting them to enter this when attempting to use the proxy?
Looks like the ntlm_auth binary is included
Hi,
Has anyone setup pfsense / squid to automatically authenticate Windows
users based on their domain login rather
than prompting them to enter this when attempting to use the proxy?
Thanks in advance.
Wayne.
I have recently added squid to my pfsense gateway and have it
configured in transparent mode. One of the things I like to do in
moving forward is that I would like to limit one host on what it can
access through the proxy. I am open to instructions on how this can be
accomplished.
TIA
Have a look at the access control tab...
You can configure it all there...
-Ursprüngliche Nachricht-
Von: Ronald L. Rosson Jr. [mailto:[EMAIL PROTECTED]
Gesendet: Sonntag, 24. August 2008 21:24
An: support@pfsense.com
Betreff: [pfSense Support] Squid Help
I have recently added squid
Hello
all my system works : captive portal, squid, etc.
But I need to restrict with acl in /usr/local/etc/squid/squid.conf
so juste before :
# Default block all to be sure
http_access deny all
I've add :
# Regles perso
acl clients_wifi src 192.168.0.0/255.255.255.0
acl plage_autorisee time
]
Gesendet: Samstag, 3. Mai 2008 22:08
An: support@pfsense.com
Betreff: Re: [pfSense Support] Squid transparent proxy and Vista
change the MTU (lower)
- Original Message -
From: Fuchs, Martin [EMAIL PROTECTED]
To: support@pfsense.com
Sent: Saturday, May 03, 2008 3:31 PM
Subject: [pfSense
Hi all !
I have a strange issue:
A friend of mine has Windows Vista. On the pfSense i have enabled squid
in transparent mode and http (TCP/80) switched OFF in firewall-rules
LAN-WAN.
Windows XP has no issues, everything works fine...
Windows Vista tells us to have no internet connection. It
change the MTU (lower)
- Original Message -
From: Fuchs, Martin [EMAIL PROTECTED]
To: support@pfsense.com
Sent: Saturday, May 03, 2008 3:31 PM
Subject: [pfSense Support] Squid transparent proxy and Vista
Hi all !
I have a strange issue:
A friend of mine has Windows Vista
Hello people,
Always when I change something on Squid configuration page, I got the
following errors:
Warning: fopen(/var/squid/acl/throttle_exts.acl): failed to open stream: No
such file or directory in /etc/inc/pfsense-utils.inc on line 1094 Warning:
fwrite(): supplied argument is not a valid
Is there a way to make squid use RAM instead of hard drive for logs and
cache? I can put 8 gigs of ram in a machine. I could put a hard drive if i
really had to, but I would really like to not have to. If it is possible,
can i get some basic instructions on what to do. Thanks for your help,
there
was a squid mailing list. I am looking for it now. I will ask my question
there.
-Original Message-
From: Ermal Luçi [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 05, 2008 1:40 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] Squid using RAM disk
On Wed, Mar 5, 2008 at 8:40 PM
Maybe I am missing something. Oh and thanks Gary, I didn't realise there
was a squid mailing list. I am looking for it now. I will ask my question
there.
I actually think part of this can be answered here. There's a
configuration in the squid tab that you can tell it how large of
memory
Hard drives are cheap, RAM isn't. What are you actually trying to achieve?
Parsing the logs on a disk isn't very time consuming. Interesting idea
though.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
On Wed, Mar 5, 2008 at 6:05 PM, Curtis LaMasters
[EMAIL PROTECTED] wrote:
Hard drives are cheap, RAM isn't. What are you actually trying to achieve?
Parsing the logs on a disk isn't very time consuming. Interesting idea
though.
I suspect that he is trying to eliminate a commonly failed part
, February 22, 2008 6:35 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] Squid - storeDiskdInit: msgget: (28) No space
left on device
I'm just telling you before Scott and the other devs tell you to.
There have been a huge number of bugfixes and changes since 1.01.
OK, I'm waiting
Hi:
I'm using pfsense 1.0.1 and I want to use squid with version
2.6.STABLE18. But I can't but this error:
storeDiskdInit: msgget: (28) No space left on device
TIA,
Javier
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For
The first response you're going to get is use a recent version of
pfSense, so let me be the first.
Second, you don't really give us enough information to go on to help
you understand what the issue is - do you *know* you have enough disk
space?
I don't think the recent version will be necesary.
I'm just telling you before Scott and the other devs tell you to.
There have been a huge number of bugfixes and changes since 1.01.
Tell me you is no enough disk space. ;-)
Sarcasm won't get you far, even if it's intended to be humorous.
I'm just telling you before Scott and the other devs tell you to.
There have been a huge number of bugfixes and changes since 1.01.
OK, I'm waiting for Final Release 1.2.
Are you trying to install this package on your own, or as one of the
supported packages through the GUI?
Supported
I've got an odd situation where I have pfSense set up with a Captive
Portal and transparent Squid, pulling from an upstream (commercial)
proxy. If I configure Squid with the upstream proxy, it pulls from it
for a few seconds (high load network), then just stops referring to
the upstream, with no
First check under the Services page under the status drop down menu. Squid
should be in there.
Curtis
]
Sent: Wed 12/26/2007 6:31 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] Squid running, squidguard blocking all traffic??
First check under the Services page under the status drop down menu. Squid
should be in there.
Curtis
winmail.dat
through
it and it loaded ok. But the second I switch it on, even if I leave default
settings, bam, no more http traffic.
Chris
From: Curtis LaMasters [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 26, 2007 9:32 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] Squid running
I'm using 1.2RC3. In the instructions for installing squid it says to start
the package. I can't see anywhere to start it, and I don't see anywhere
that tells me if it is started or not. I have it configured as a
transparent proxy. Also, when I start squidguard, no HTML traffic will pass
at
Dear Madam/ Sir,
First off I'd like to say that I really like pfSense! It is a very stable and
easy to use system with loads of great options!
There is one problem I'm facing though: When I install the Squid package and
activate the transparent proxy option my 10Mbit fiber internet
Dear Madam/ Sir,
First off I'd like to say that I really like pfSense! It is a very stable and
easy to use system with loads of great options!
There is one problem I'm facing though: When I install the Squid package and
activate the transparent proxy option my 10Mbit fiber internet
1 - 100 of 200 matches
Mail list logo
