I have done this--smbisonic decoded to 2 hexagons one above the other. I
have also add a stereo mix into the decode. It is known as B+
ThomasChen
In a message dated 7/3/2013 7:34:00 A.M. Pacific Daylight Time,
m...@moritzfehr.de writes:
hi everyone,
thank you very much for your
late
reflections and some time consideration. This would be added to direct and
early reflections which can be panned to pairs of speakers or other means of
localization. While not WFS, I think that it will be very satisfactory.
ThomasChen
In a message dated 7/7/2012 7:16:12 P.M
I have been to the Audium several years ago. It is a fascinating audio
experience. It is not a coherent B format replay but rather a creative
experience. I would recommend that you listen to this.
ThomasChen
In a message dated 4/19/2012 4:41:22 P.M. Pacific Daylight Time,
er
I have tried a 10 decode with 5.1 type and hight directly above, also
12 decode with hexagonal arrangement with one above the other and 16
decode with octagonal arrangement again one above the other. I prefer
the 16 and find that the integration of the speakers is more complete.
ThomasChen
B format. The early time of arrival from the
stereo front helps in both richness and localization.
ThomasChen
-Original Message-
From: Anthony Palomba
To: Surround Sound discussion group
Sent: Thu, May 5, 2011 12:41 pm
Subject: Re: [Sursound] Ambisonic Speakers what type to buy for 8
I use two octagons with one above the other. The decoding is much
simpler for Z with the angles the same. My decoder is based on the
angle from zero in front.
ThomasChen
-Original Message-
From: Pedro Lopes
To: Surround Sound discussion group
Sent: Thu, May 5, 2011 10:46 am
pressure. The
advantage of distributed sound sources is that the sound level is more
tolerable than from two. They are in a 1000 sq. ft. room
ThomasChen
In a message dated 5/5/2011 6:07:32 A.M. Pacific Daylight Time,
i...@sacredresonance.com.au writes:
Hi Darren here,
I am doing a
My listening room for amisonics is quite live but diffuse. I decode as
two rings of 8 like a cylinder. I have found localization good.
ThomasChen
In a message dated 3/25/2011 6:07:20 P.M. Pacific Daylight Time,
rica...@justnet.com.au writes:
When I was the R&D teaboy at Wharfedal
I routinely use ProTools to mix B+ . All the decode is done in a
separate computer that takes l/r and B format and will decode to 10, 12
or 16 positions. If you do not use Z is will do horizontal only
ambisonics.
ThomasChen
-Original Message-
From: Dave Hunt
To: sursound
routinely use is that the spot mics are 10 to 30 msec or feet earlier
in time than the Soundfield Mic. This uses early time of arrival to
help localize your sound. A Soundfield 350 is more compact and will
also give lline outputs.
This sounds like an interesting project!
ThomasChen
B
10 matches
Mail list logo
