Hi!
Could somebody from the top of their head give me the most useful
pointers on FRK rubidiums? I now have one as part of a box, and
naturally I want to stash up on the information.
The rubidium locks nicely, if just patiently sitting there and waiting,
and the designers of the box was
Nice acquisition!
Rob K
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Magnus Danielson
Sent: 06 July 2010 09:41
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] FRK and TS-105A
Hi!
Could somebody from
On 07/06/2010 10:51 AM, Rob Kimberley wrote:
Nice acquisition!
Yes, indeed. Now the curious mind wants to dig in. :)
It set me back 159 USD, which I can handle and then naturally shipping
and customs. Ah well.
For an As is condition, it is working modulus operator inexperience
with the
- Original Message -
From: Jürg Kögel j.koeg...@gmail.com
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Tuesday, July 06, 2010 01:24
Subject: Re: [time-nuts] PICTIC II PCB group buy
Plaese add me to the list for two boards
Thanks Juerg
I assume you found manual for FRK, available at
http://www.to-way.com/tf/frk.pdf
I probably have one lurking in a box somewhere in my store. If I can find
it, it's yours for the postage.
Rob
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
On 07/06/2010 06:45 PM, Rob Kimberley wrote:
I assume you found manual for FRK, available at
http://www.to-way.com/tf/frk.pdf
It was hinted to me from Björn, thanks to your both.
It has a FRK-HO, which is the low-noise variant, but offset outside the
normal trimming range.
I probably have
If it's not too late - Please add me to the list for two boards (ignore my
previous null message).
Thanks, Brooks
- Original Message -
From: Jürg Kögel j.koeg...@gmail.com
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Tuesday, July 06, 2010
Hi
The Trimble NTPX appears to talk the same protocol as the TBolt. They both run
just fine with the Trimble Thunderbolt monitor software. The NTPX does not
appear to work with Lady Heather. Is there a magic switch that enables it to do
so?
Thanks!
Bob
Just a wrap up on the 5061A that had a Beam I but no 2nd Harmonic
indication.
I was originally stymied by swaps of modules with another 'functioning unit'
with no help. I then swapped CS tubes with A4 Harmonic Generators attached
and A11 Cesium controllers at which point neither unit worked. I
It looks like there's still a problem with the trimmers. R17 and R22
are shown as part # 3266P-1-502LF and the photo shows the proper type of
trimmer. The data sheet and the catalog page show that 3266P has the
adjustment parallel to the board rather than vertical. Mouser just used
the same
10 matches
Mail list logo