The parts appear to be there, it just doesn't run.
Tom Holmes, N8ZM
-Original Message-
From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Graham
Sent: Tuesday, May 17, 2016 7:48 PM
To: time-nuts@febo.com
Subject: Re: [time-nuts] FS HP 5335A
Does not have the
Holmes, N8ZM
>
> -Original Message-
> From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Bob Stewart
> Sent: Tuesday, May 17, 2016 7:08 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] FS HP 5335A
>
> Hi,
>
ime and frequency measurement"
>Ogg: Re: [time-nuts] FS HP 5335A
>
>HI Bob...
>
>Thanks for the tip. Have been down that road with this one and it didn't fix
it. I think someone may have deliberately disabled the internal timebase to
prevent users from having anything but the ho
I am a frequency nut, as opposed to a time nut. There may be some correlation
between the two subjects! 😄
I will be at Horror Arena this weekend, too. Would be fun to meet the gang.
Rob Sherwood
NC0B
Sent from my iPad
> On May 17, 2016, at 4:09 PM, Tom Holmes wrote:
>
>
>
> For some reaso
-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Bob Stewart
Sent: Tuesday, May 17, 2016 7:08 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] FS HP 5335A
Hi,
I know this is a for sale post, but there's a jumper that needs to be there to
work with the
Does not have the basic internal timebase or doesn't have the OCXO timebase?
I have one in which I put an OCXO and required snipping/removing a
jumper on the main board to disconnect the onboard timebase.
Perhaps some where sold with OCXO only and never had an onboard timebase
on the main boa
U1B(6) and
U2B(6)."
Bob
On Tue, 5/17/16, Tom Holmes wrote:
Subject: [time-nuts] FS HP 5335A
To: "'Discussion of precise time and frequency measurement'"
Date: Tuesday, May 17, 2016, 4:38 PM
For some reason it did not have an
internal timebase when
For some reason it did not have an internal timebase when I got it, and
throws an error, UNLESS you have an external 10 MHz connected before you
turn it on. Then it works fine.
Please contact off list for details,
AND if you happen to be in Dayton, OH, this weekend for a little ham radio
sw
