-Original Message-
Message: 1
Date: Sun, 21 Sep 2014 14:28:57 +0330
From: Hamidreza Hosseini hamid166...@gmail.com
Subject: [Tinyos-help] multihop routing does not work almost always
To: tinyos-help@millennium.berkeley.edu
Message-ID:
cafgnv45avu5syeyda06plyxuznp+crgbmaq-gjes8qu7ixs
is under TestRPL in the tests folder in the tinyos 2.x version and CTP
is under the EasyCollection apps folder.
Best,
Jose
-Original Message-
Message: 1
Date: Sun, 21 Sep 2014 14:28:57 +0330
From: Hamidreza Hosseini hamid166...@gmail.com
Subject: [Tinyos-help] multihop routing does
Message-
Message: 1
Date: Sun, 21 Sep 2014 14:28:57 +0330
From: Hamidreza Hosseini hamid166...@gmail.commailto:hamid166...@gmail.com
Subject: [Tinyos-help] multihop routing does not work almost always
To:
tinyos-help@millennium.berkeley.edumailto:tinyos-help@millennium.berkeley.edu
Message-ID
Hi all,
I want to use multihop libraries on TelosB motes. I programmed motes with
SurgeTelos app, but it does not work correctly almost always.
I have two motes and a gateway. First I put the motes in a location that
both of them could reach the gateway and messages of both of them was
received
Hi all,
I want to send messages using LQIMultiHop library in tinyos-1.x on TelosB
motes. I programmed motes with app/SurgeTelos, but the motes does not
forward received messages. I checked MultiHopEngineM.nc and found that in
ReceiveMsg.receive() function, there is a line that contains
if
Sir , I have been working on a project dealing with iris motes. I have
installed TinyOs and other necessary components ( Programmers Notepad,
Graphviz , XSniffer, MoteConfig etc following Mote-works manual ) and now
working on multihop routing. I have installed Mote-view , programmed our
motes
Eric - were you able to contact Adam?
- om_p
On Mon, Oct 14, 2013 at 10:26 PM, Omprakash Gnawali gnaw...@cs.uh.edu wrote:
I think you are looking for Ádám Erdélyi, MSc on this page:
http://uni-klu.ac.at/tewi/ict/nes/pc/staff/
- om_p
On Mon, Oct 14, 2013 at 7:31 PM, Eric Decker
DEAR SIR,
I'm a student of computer science , working on Tiny OS and Nesc .
I'm not able to install Tiny Os properly . any kind of help in the
following will be appreciated .
1.Installing TinyOS 2.x
2.Installing NCC (nesc) compiler
3.Mote works installation .
Thanking you,
yours sinceerely,
...@millennium.berkeley.edu] on behalf of Gangadher.mattaIIT
Guwahati [gangadher.mat...@gmail.com]
Sent: Saturday, October 05, 2013 7:39 AM
To: tinyos-help@millennium.berkeley.edu
Subject: [Tinyos-help] MULTIHOP ROUTING
DEAR SIR,
I'm a student of computer science , working on Tiny OS and Nesc .
I'm not able to install
Guwahati [gangadher.mat...@gmail.com]
Sent: Saturday, October 05, 2013 7:39 AM
To: tinyos-help@millennium.berkeley.edu
Subject: [Tinyos-help] MULTIHOP ROUTING
DEAR SIR,
I'm a student of computer science , working on Tiny OS and Nesc .
I'm not able to install Tiny Os properly . any kind of help
...@gmail.com]
Sent: Saturday, October 05, 2013 7:39 AM
To: tinyos-help@millennium.berkeley.edu
Subject: [Tinyos-help] MULTIHOP ROUTING
DEAR SIR,
I'm a student of computer science , working on Tiny OS and Nesc .
I'm not able to install Tiny Os properly . any kind of help in the
following
send error messages
and you can use virtual image of read tinyos.net install instrutions
http://tinyos.stanford.edu/tinyos-wiki/index.php/Installing_XubunTOS_(with_TinyOS_from_tp-freeforall/prod_repository)_in_VirtualBox
--
View this message in context:
sweet.
Any one know what version of XbunTOS is inside the VM? Is it 13.04?
Anyone know how to get a hold of the author of the TinyOS wiki page. His
user name looks like an international one.
I'd like to get his screen shots and see if I can get them added to the
wiki.
On Mon, Oct 14,
I think you are looking for Ádám Erdélyi, MSc on this page:
http://uni-klu.ac.at/tewi/ict/nes/pc/staff/
- om_p
On Mon, Oct 14, 2013 at 7:31 PM, Eric Decker cire...@gmail.com wrote:
sweet.
Any one know what version of XbunTOS is inside the VM? Is it 13.04?
Anyone know how to get a hold
hey can u please tell where u got the programmes for multihop ,are u
refferring some repositor ,or give some links if u know
--
View this message in context:
http://tinyos-help.10906.n7.nabble.com/Multihop-programming-tp11321p22914.html
Sent from the TinyOS - Help mailing list archive at
Hello
I am a student and i am working on a wireless video sensor network using
TelosB motes.
I am using cygwin and got most of TinyOS 2.1.1 working except for the java
GUI, the problem is i got the motes to blink and also communicate using the
quick start guide for the basestation and
Sent: Tuesday, May 01, 2012 1:12 PM
To: tinyos-help@millennium.berkeley.edu
Subject: [Tinyos-help] Multihop communication
Hello everyone, I am doing project on multihop communication and for that I
am using MultihopOscilloscope. But I also want to print the route
followed that is the id's
Hello everyone, I am doing project on multihop communication and for that I
am using MultihopOscilloscope. But I also want to print the route
followed that is the id's of the mote through which packet is being
forwarded to the base therefore I will be highly thankful for your
assistance.
Hi folks,
Someone have worked with multihop on blip? please if you have any
reference code, whatever information or maybe a pointer to it I'll be
very thankful to you.
Thanks in advance,
Alejandro.
___
Tinyos-help mailing list
you need to be a bit more verbose.
what do you mean by multihop? routing? or something different.
I'm pretty sure blip 2 include routing code
From cPhone
On Jul 16, 2011, at 1:13 PM, aca...@correo.ugr.es wrote:
Hi folks,
Someone have worked with multihop on blip? please if you
hi!
I am working over Windows/cygwin with both cygwin/tinyOS installed.
I want to check for the graphics in TOSSIM simulation and I checked it over
MViz app.
I changed my directory to ...apps/MViz and used make micaz sim command.
After that I changed my directory to $TOSROOT/tools/tinyos/misc
Hi,
First I should implement base station in sensor node, to receive packets
form sensor around and forward them to other sensors ?
I want to realized multihop routing but my problem is, how can
differentiated in server node packets from different sensors , how can
analyze received packets
Hello all,
What are the TinyOS options to create a multihop IEEE 802.15.4 duty
cycled WSN network? Is still the only possibility the macTDBS
implementation of the open-zb stack?
I see looking at the Tinyos code that a wrapper has been created to use
the TKN-15.4 stack with the Zigbee
Hi
I am beginner with tinyos and mica2dots. I have to implement multihop on
mica2dots. I am trying to use the code provided in Tinyos repository. Also,
i am not sure which base station apps should i use to communicate with
multihop networks.
Currently, single hop is working fine with TOSBase
Hi,
I am rupesh I am working in IIT delhi ,Presently I am working on Tiny OS .
My target is to achieve a network in which a source can send a message to
destination mote using telosb suppose there is a source and destination
mote is not reachable to souce then the protocol should be such that
Please have a look at following mailing list threads
http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2008-February/031389.html
http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2008-May/033887.html
Manjunath D
these links are not so much clear in fact telos b is not supporting tossim
is there any basic method to do that
rupesh
On 2 August 2010 13:19, Manjunath Doddavenkatappa
dodda...@comp.nus.edu.sgwrote:
Please have a look at following mailing list threads
Does anybody know how to define a multihop topologies in Tossim?
Thanks in advance
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
hi, in the below code it uses interface RouteControl to send the data... i am
really sorry for asking this many times but, i still do not get how to find out
which routing algorithm it uses, if i am not mistaken in looking for the
correct source according to below link
On Sat, Feb 20, 2010 at 6:11 AM, Riki Tiki mongoose_r...@mail.ru wrote:
hi, in the below code it uses interface RouteControl to send the data... i am
really sorry for asking this many times but, i still do not get how to find
out which routing algorithm it uses, if i am not mistaken in
On Fri, Nov 20, 2009 at 6:57 AM, Anand Chandrashekar anand...@gmail.com wrote:
Hello,
I require some urgent guidance in this regard. We were
implementing a transport protocol and to achieve multi-hop routing we need
to use the route library. I have a doubt regarding this. The data
Hi All
I am also implementing a multi hop clustering algorithm. I wanted to know if
there is a way to send messages to a subset of all the motes deployed ? I
want to use this for intra cluster communication. If a group of Nodes can be
given an ID and cluster head sends to the entire group and once
Hello,
I require some urgent guidance in this regard. We were
implementing a transport protocol and to achieve multi-hop routing we need
to use the route library. I have a doubt regarding this. The data at the
final destination is received by the multihop component of the Route Library
Hello All,
I have been reading through the mailing list and relative papers on
multi-hop routing in TinyOS and I am hoping someone can suggest a good and
simple implementation. I am using tinyos-2.x with mica2 motes and the
options for routing aren't always applicable to both 2.x and mica2. This
I will say use tinyOS implementation of Dymo routing
(http://docs.tinyos.net/index.php/Tymo). They called it Tymo.
Dymo is modified form of AODV. They remove the routes after sometimes if
it is not used and there is some timeout for each route maintained.
However, you could modify it to fulfill
Hi Faisal,
Thanks for the suggestion. I had tried briefly to install Dymo before but
found I was missing some key wirings, among other problems. Do you know if
there is an available code example that works (along with .h, config and
implementation files)?
Also, right now all 20 motes can talk to
I have not used Tymo myself. I hope someone else in the list could help you.
best regards,
Faisal Aslam
Ellen Shlossberg wrote:
Hi Faisal,
Thanks for the suggestion. I had tried briefly to install Dymo before
but found I was missing some key wirings, among other problems. Do you
know if
On Jul 29, 2009, at 7:10 AM, Ellen Shlossberg wrote:
Hello All,
I have been reading through the mailing list and relative papers on
multi-hop routing in TinyOS and I am hoping someone can suggest a
good and simple implementation. I am using tinyos-2.x with mica2
motes and the options
Thank you for all the advice. I am using the modified Collection protocol
from the tutorial. I'm still not sure of how it gathers a tree from the
program, but I used the Listen function and found that each packet received
at the root will include the id of a mote it has found since being turned
On Wed, Jul 29, 2009 at 2:53 PM, Ellen Shlossbergeshl...@gmail.com wrote:
Thank you for all the advice. I am using the modified Collection protocol
from the tutorial. I'm still not sure of how it gathers a tree from the
program, but I used the Listen function and found that each packet received
I found one bug which is i haven't start the RoutingControl. Once i
included the following line in Boot.booted(), then it prints the start
multihop line but not anything in Send.sendDone();
call RoutingControl.start()
Sorry for my mistake.
best regards!
Lasanthi
2009/6/30 ලසන්ති
2009/4/27 Mohammad Sajjad Hossain saj...@purdue.edu:
Hi,
I am trying to develop an application where I have two types of messages. I
want to send one type of messages using a routing protocol (like MViz) and
the other without any routing protocol. Is it doable?
Yes. Use Collection sender for
Hi,I am trying to develop an application where I have two types of messages.
I want to send one type of messages using a routing protocol (like MViz) and
the other without any routing protocol. Is it doable?
Thanks...
--sajjad
___
Tinyos-help mailing
...@millennium.berkeley.edu] En nombre de Luis
Carlos Duque Arcila
Enviado el: martes, 31 de marzo de 2009 2:27
Para: tinyHelp
Asunto: [Tinyos-help] Multihop got me confussed
hi everyone,
I have a time triying with the multihop functionallity, i try with the
MultihopOsciloscope, but i rather work
hi everyone,
I have a time triying with the multihop functionallity, i try with the
MultihopOsciloscope, but i rather work with an implementation based in the TEP
119, but in both of the codes that i made, i reallize that is not happening the
Send.SendDone.
I also wanth to know something
Hi everyone, i want to know if there is any suport to work multihop on tinyOs
2.x, i am working with Iris plattform and mts400 on tinyOs 2.0..
I will apreciate any help that you can give me...
Thanks a Lot
L:C:
_
Discover
Hi,
You can have a look on multihopOscilloscope application in Tinyos2.x that
make use of CTP (Collection tree protocol).
Thanks,
Poonam
2009/3/25 Luis Carlos Duque Arcila carlitos...@hotmail.com
Hi everyone, i want to know if there is any suport to work multihop on
tinyOs 2.x, i am working
Hello All,
I am using Tinyos 1.x. I am having micaz motes. I am having some
doubts regarding multihop programming.
I want to do the following:
Node 0 - Node1--Node2
(Base station) (intermediate)
On Wed, Feb 18, 2009 at 1:46 AM, Dhivya G dhivy...@gmail.com wrote:
Hello All,
I am using Tinyos 1.x. I am having micaz motes. I am having some
doubts regarding multihop programming.
I want to do the following:
Node 0 -
Hi All,
I just want to know that is it possible to simulate multihop routing in
Tossim? In my application I have to measure the packet travel delay from
source to destination. In Tossim, how to enable packet receive event?
Thanks in advance for help.
Thanks,
Poonam
Hi All, in tinyos1.x while running surge application the nodes starts
sending packets after long delay why and up to that time they are getting
the parent address as 65535 the broad cast address. any help about the
multihop routing algo used in surge application?
--
Thanks Best Regards
Adeel
On Sat, Jan 31, 2009 at 10:36 AM, Adeel Akhtar
adeel.akhtar.r...@gmail.com wrote:
Hi All, in tinyos1.x while running surge application the nodes starts
sending packets after long delay why and up to that time they are getting
the parent address as 65535 the broad cast address. any help about
On Tue, Sep 30, 2008 at 5:24 PM, ranal fernando [EMAIL PROTECTED] wrote:
Dear all,
What are the changes I have to make to change a single hop oscilloscope
program to multihop?
There is an example called MultihopOscilloscope you can look at.
- om_p
Dear all,
What are the changes I have to make to change a single hop oscilloscope program
to multihop?
Any help would be appreciated
Thanks in advance for your replies
Ranal
_
Want to do more with Windows Live?
Dear all,
I have an Easysen board attached to a tmotesky. Easysen has given their example
application. This is not multihop. Can anyone tell me how to make this program
multihop? What are the basic functions we need to add to make a basic program
multihop?
Thanks .
Ranal
Does anybody know if there is a command or event in the TinyOS stack
that I can use in my application? For example, let's say that I am mote
B. Basically, what I would like to do is toggle a port pin each time a
packet from mote A is forwarded to mote C through mote B.
Thanks,
-Jim
Does anybody know if there is a command or event in the TinyOS stack
that I can use in my application when a packet is sent or received? For
example, let's say that I am mote B. Basically, what I would like to do
is toggle a port pin each time a packet from mote A is forwarded to mote
C through
Hi all
I am new to tinyos and I have just started working on with the telosb motes. I
am just trying out to understand the applications included in the tinyos
package. When I was looking into some of them I found Active Messages which are
said to be single-hop communication protocols. I would
Hi Dinesh,
Take a look at MultihopOscilloscope and MViz in the apps directory.
They both use CTP for multihop data collection.
Regards,
Zainul.
On Fri, Aug 22, 2008 at 11:31 AM, Dinesh Koya [EMAIL PROTECTED] wrote:
Hi all
I am new to tinyos and I have just started working on with the telosb
Hi all,
I was wondering if there is a multihop communication component in TinyOS 2.x
like the GenericCommPromiscuous in TinyOS 1.x. Can anyone please help ?
thanks
Edwin
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
On Mon, Jul 28, 2008 at 1:33 AM, afuba edwin [EMAIL PROTECTED] wrote:
Hi all,
I was wondering if there is a multihop communication component in TinyOS 2.x
like the GenericCommPromiscuous in TinyOS 1.x. Can anyone please help ?
Please take a look at CTP, which replaces Multihop communication
Hi all,
Can you please help in finding what are the multihop routing algorithms for
wireless sensor networks.
Is is worthful to look MANET routing algorithm for wireless sensor
metworks?
Thanks,
Poonam
___
Tinyos-help mailing list
Hi Poonam,
If you are just starting, I would suggest you go for MultiHop Protocols in
TinyOS 2,
which are CTP(Collection Tree Protocol) and LQI(improved version of
MultiHopLQI in tinyos 1). These are made better by the developers based on
their experience with problems in
TinyOS 1
Hello!
I'm using telosb motes and tinyos-1.x. I want to implement routing for
Oscilloscope of moteiv application..Is it right to use the MultihopLQI as
it is used in SurgeTelos?In SurgeTelos the mote with id=0 is loaded with
SurgeTelos app unlike my case that the node with id=0 is loaded with
Is there any tools available that can generate the multihop network of
sensor nodes. what I need is around 600-1000 nodes graph with random
topology and represent that graph in adjency matrix form.
___
Tinyos-help mailing list
Dear all,
Is there a multihop application in TOS 2.0 for telosb motes? Because I
tried Antitheft it is only for Mica motes.
Thanks in advance.
Saliya
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
On Tue, Jul 8, 2008 at 12:36 PM, Mr Meddage Saliya Ranal Fernando
[EMAIL PROTECTED] wrote:
Dear all,
Is there a multihop application in TOS 2.0 for telosb motes? Because I
tried Antitheft it is only for Mica motes.
You can also look at MultihopOscilloscope and tests/TestNetwork for
examples
Hi. I would like to set up a multihop, power efficient network with
TinyOS. I have basic CTP working, but I would like to get answers to a
few simple and general questions before I get in too deep.
1. It seems like CTP is the preferred system I should be using, since
it has a TEP, but I also see
On Thu, May 29, 2008 at 12:06 AM, Dima Kogan [EMAIL PROTECTED] wrote:
Hi. I would like to set up a multihop, power efficient network with
TinyOS. I have basic CTP working, but I would like to get answers to a
few simple and general questions before I get in too deep.
1. It seems like CTP is
On Thu, May 29, 2008 at 1:46 PM, Dima Kogan [EMAIL PROTECTED] wrote:
Thanks for your reply, Omprakash. I've just looked at the MAC protocol
you mentioned, SCP-MAC, and also S-MAC and B-MAC. I'm a bit unclear on
what these are. Are these point-to-point or multi-hop protocols? The
papers imply
Hi all,
i am using micaz for buliding a multi hop environment. I read crossbow's
xmesh manual. The xmesh service implemented by the XmeshRouter or
MULTIHOPROUTER component. The routing component provieds a sending
interface in Mhopsend which sends packets into the network. i couldn't
find any
My Moteiv MultiHop application displays its parent and neighbors
10 --- 9 --- 1 (Base)
10 shows its parent and neighbor as node #9
9 shows its parent and neighbor as node #1, it does not show #10 as a neighbor.
My difficulty is how does the hop work? Messages from #10 get to base and must
do
Hi Folks,
I have an application written for TinyOS 1.x that I am converting from
a broadcast application to a multihop application and I'm running into a
bit of a problem trying to send multiple packets which constitute a data
value.
The single hop application uses the SendMsg interface and
Hi Folks,
First, I appologize for the incomplete message I sent previously. I was
too fast on the send button. Now, to my problem
I have an application written for TinyOS 1.x that I am converting from
a broadcast application to a multihop application and I'm running into a
bit of a
hi
i am describing my problem
the code which is attached to this mail is dumped in three motes with
moteid's 2,1,0
In this code the data is being sent for every two mins but the major problem
is that for eg:-if the mote2 sends data at 11(hrs).40(mins).48(secs)
again it should send data at
hi
this code is working good but the major problem is that it is not sending
the data in the multihop way, so can anybody fix the problem
it's payload is 18 bytes
pl help me to know why multihop is not working in my code
i'm using tinyos-1.x
thanks in advance
extADC1_3phrmsM.nC
Hi all,
I want to add that I work with TinyOS_1, can that cause my first
problems?
Thanks, Anat
This message (including any attachments) issued by RAFAEL- ADVANCED DEFENSE
SYSTEMS LTD. (hereinafter RAFAEL) contains confidential information intended
for a specific individual and purpose,
Hi,
I am working with multihop component, and I have some problems:
1. Each mote transmits a message every second, but the base receive each
message more than one.
2. Is it possible to define the last Destination address in the network
for each mote?
Thanks, Anat
This message (including
hi
By using this program i am not able to send the packets through
multihop
what could be the problem???
but data is transmitted to basestation successfully
and
is there any provision to send a signal(trip a relay) from the
basestation to the mote in the field, by using
hello;
i want to build a network consists of several clusters. Where, in a cluster,
all nodes send their messages to a clusterhead which sends these messages to
Sink.
But in addition to that, there is an exchanging of messages between the
clusterheads.
can any body say to me, if i need to
On Tue, June 5, 2007 12:10 pm, Boushra MAALA said:
hello;
i want to build a network consists of several clusters. Where, in a cluster,
all nodes send their messages to a clusterhead which sends these messages
to Sink.
But in addition to that, there is an exchanging of messages between the
Hi,
I am using Tmote and a multihop application like surge or Delta. I want to
store all the readings at my laptop in text files and I don't need any GUI
based display. I just need some direction as to how to write a application
which can read the packets from the COM port and then store the
Hi,
I am using boomerang with tinyos-1x. I was trying out MultiHop routing for 5
motes (tmote sky) stretched out in a line. I was losing one packet for every
10 packets. In this normal or should I be getting 100% of the packets from
the farthest mote. I am asking this as I thought the MultiHop
Hello,
Why do you think there will be a problem? I use Delta (which uses multihop) on
Moteiv Tmotes with a 1% low power duty cycle and have no problems.
Simon
RE:
Hi,Maybe someone that knows the inner working of tinyos (or at least more than
me) can answer this: Is it safe to assume I'll
Hi,Maybe someone that knows the inner working of tinyos (or at least more than
me) can answer this: Is it safe to assume I'll have a problem using multihop
with low power modes?thanks in advance, Bruce
___
Tinyos-help mailing list
another way is tinyAODV/DSR in contribute/hsn directory
On 1/15/07, Tarun Bansal [EMAIL PROTECTED] wrote:
You have two options:
1. Please check
http://www.tinyos.net/tinyos-1.x/doc/multihop/multihop_routing.html
You can use MultiHop modules provided by TinyOS. For that you can
refer to Surge
Hi,
I have a requirement in which I need to send a message receieved at one
node(mote F1) to the base station(B1) through a number of Intermediate
motes(M1,M2,M3) .Basically,this is a simple multihop approach.Please give
pointers to how this can be done effectively.If you have any application
Hi everybody! I'm using tmote sky and tinyos 1.x. I'm using /opt/moteiv/tos/lib/MultiHopLQI for send messages to base station in MultiHop but I have some problems.. Sometimes some packets are duplicated, that is the base station received the same packet. The only field that differentiate the
Duplicate packets are usually caused by an ack that was lost by the
transmitting node. Thus, two packets are received at the base station
instead of one. Simply filtering by sequence number addresses the
issue.
-Joe
On 11/7/06, Crif1102 [EMAIL PROTECTED] wrote:
Hi everybody!
I'm using tmote
and looking forward for your response.Regards Faisal Karim - Original Message From: Daniel S. Menasche [EMAIL PROTECTED]To: Faisal Karim [EMAIL PROTECTED]Cc: tinyos help
tinyos-help@Millennium.Berkeley.EDUSent: Wednesday, November 1, 2006 7:07:59 PMSubject: Re: [Tinyos-help] Multihop from
Hi Alli want to use /lib/Route multihop routing to send messages from base (mote 0) to some specific node lets say (node 9)Do anybody know the fix or some other routing protocol easily available to be used.ThanksRegards Faisal Karim ___
Tinyos-help
Dear Faisal,
You can use MultiHopLQI with SurgeTelos. If you want to change the
base station address from the default (which is 0) to 9:
(a) in MultiHopLQI.nc set the variable BASE_STATION_ADDRESS to 9
(b) also change line 145 from
if ((TOS_LOCAL_ADDRESS != 0) (val BEACON_TIMEOUT))
It took me longer to find this than re-write, but see:
https://mail.millennium.berkeley.edu/pipermail/tinyos-help/2006-August/018984.html
basically you have a small number of messages/sec to spread around.
MS
lamiaimeil wrote:
Hi all,
I'm using tmote sky with tinyos-1.x and I'm using
Hi Cristian,See the AM.h file in /opt/moteiv/tos/lib/CC2420Radio. That field is populated by the CC2420RadioM module in that same directory.Best,CoryOn 9/28/06,
Crif1102 [EMAIL PROTECTED] wrote:
Hi, I've a question to suppose... I'm using MultiHop in /moteiv/tos/lib/MultiHopLQI and i try to
Hi, I've a question to suppose... I'm using MultiHop in /moteiv/tos/lib/MultiHopLQI and i try to understand code inside. I've looked that in MultiHopLQIM is used the lqi field of the TOS_Msg but in the definition of the TOS_Msg structure I haven't found it! Further, in MutliHopLQIM this field
You may be looking at the wrong TOS_Msg def...
The 'regular' one is in tos/types/AM.h and is used
for mica2 and UART messages. The lqi field is part
of the 802dotWhatever header used by micaz and others.
See local versions in, e.g., platform/micaz/AM.h.
Sorry, but I dunno who should fill it in.
Hi, thanks for the advice, I tried with Delta and Trawler and everything worked. The problem with the other applications was that I wasn't using the node 0 as root. Moreover, I can see it's necessary to wait some time while the routing tree is being built, but eventually it works great.Joe
I'm trying to set up a multip-hop collection tree with tmote motes. I am using component MultiHop (moteiv/tos/lib/MultiHop), but I can't get it to work. The node attached to the USB is constantly sending a packet to the computer, regardless what the other motes are sending. Apart from that, using
Have you tried using Delta and Trawler?
Note that the mote connected to the PC must either be node id 0 or
must communicate with a program on the host that informs the mote that
it is the base station (such as Trawler)
-Joe
On 9/22/06, Pablo Gil Montaño [EMAIL PROTECTED] wrote:
I'm trying to
I'had the same problem..and now (today) it seems to work! Try to verify that UartDetectC recognize that mote was connected via USB... I found this problem. Perhaps one other problem was to strictly verify that base station don't comunicate with the sender mote...in one test after two minutes I
1 - 100 of 124 matches
Mail list logo
