I'd like to know if there is a way to play music stored on an Android
device that is connected to the same wifi network as the Squeezebox
Touch.
This thought came to me only recently. I think it would technically be
possible to add this to a SB controller app without too much hassle, but I
Cavcalade wrote:
Hello,
I'd like to know if there is a way to play music stored on an Android
device that is connected to the same wifi network as the Squeezebox
Touch.
I'm happy with any solution.
Thanks!
There are three possibilities that I can see:
1) LMS on the android
I am a new owner and still trying to understand the SBT Audio controls.
What do the various Audio Volume Settings mean ? Should I set them to
Fix and 100% ? Even with them set , the Volume control on the remote
still work, so perhaps them they mean different things . No clear
explanation in the
JohnSwenson wrote:
There are three possibilities that I can see:
1) LMS on the android device. I don't think this exists, but it's not
technically impossible.
2) upnp server on the android device, local LMS server with upnp client.
This probably exists and could be made to work after a
http://forums.slimdevices.com/showthread.php?90710-What-is-the-best-way-to-control-the-volumehighlight=volume+settings
This thread may help some, you can search for more info. Most people
recommend setting the fixed volume at or near 100 % and then adjusting w
your amp as desired.
Does your
sportflyer wrote:
I am a new owner and still trying to understand the SBT Audio controls.
What do the various Audio Volume Settings mean ? Should I set them to
Fix and 100% ? Even with them set , the Volume control on the remote
still work, so perhaps them they mean different things . No
My system is as follows for 2 channel listening:
ComputerEthernetSBT Energy XoverHigh Pass to Jolida Fusion Tube
Preamp OdysseySE +++ Power ampSalk Song Towers
Low Pass to
Behringer Feedback Destroyer SVS PC12 NSD Subwoofer
BTW I am using the SBT Analog Out to the Preamp.
REW was used to
dsdreamer wrote:
My setup is Flac Touch 7.7 EDO V-link 192 S/PDIF Rega DAC. I
have this working reliably at all sample rates. Can you check the light
on the V-link to see if it is locking on 192kHz? Obviously if the lock
light is on, we should worry more about the cable and DAC, whereas
I'm not familiar with most of your equipment, but if I understand your
hookup correctly, you are controlling the volume of your main speakers
via the preamp pot but sending the full (non attenuated) signal from the
SBT to your sub. If this is indeed the case, then it's not surprising
that your
guidof wrote:
I'm not familiar with most of your equipment, but if I understand your
hookup correctly, you are controlling the volume of your main speakers
via the preamp pot but sending the full (non attenuated) signal from the
SBT to your sub. If this is indeed the case, then it's not
garym wrote:
EDO works with 7.7.2. It only needed 7.8 if your were converting your
FLAC to WAV on the server side rather than the TOUCH side. For the life
of me, I really don't understand why one would want to convert from
TOUCH USB to S/PDIF instead of using the TOUCH's S/PDIF. (by the
Turnandcough wrote:
I read that the Touch' USB output was better than its S/PDIF output.
I'm very curious by nature and I needed to find out for myself.
It's not night and day but I can say that adding the V-Link in the mix
HAS improved the sound somewhat. It's just a bit more rounded and
sportflyer wrote:
I have rearranged the connections by inserting the Preamp before the Ext
Xover . Now it works perfectly. SBT Remote Control vol at Max and Sub
output is well behaved as before. Thanks very much for pointing out to
me the error. I never had that problem before because the
As you could see from previous posts
(http://forums.slimdevices.com/showthread.php?94218-Asynch-USB-vs-non-USBp=696834viewfull=1#post696834),
I was telling everyone that the scheme of Touch - V-Link - DAC was
technically not promising.
That was before I tried it anyway.
All I can say is that
Turnandcough wrote:
The lock light is on and the 192 light is red. The only sound I get is
the odd click here and there. I'm running 7.8(I thought this version was
the only one that worked with EDO) and all my files are FLAC.
When I switch from 24/96 to 24/192 my DAC's input signal LED
There are three possibilities that I can see:
1) LMS on the android device. I don't think this exists, but it's not
technically impossible.
2) upnp server on the android device, local LMS server with upnp client.
This probably exists and could be made to work after a fashion.
3) samba server on
16 matches
Mail list logo
