I have an SBT which works fine for a while but when it has been switched
off it can switch back on having lost the Software Updates and reverting
to version 7.7.3 . As I use this unit mostly to play the Radio Paradise
Flac stream this is a pain as I have to update the unit to the next
version and
With regard to sound quality and if something does or does not make a
difference for me it is always simple. Can I hear it ? Can I hear it
consistently across a wide range of music ? Is it better or just
different ? If I can hear it and it is consistent and it is better and
not just different do
I have been contacted by DSpeaker by e-mail and they say the latest
firmware update currently on the site has solved all the problems with
the USB connection to the Touch. Reading the above saga there has
obviously been a few problems but they seem very confident that this is
now resolved.
Not
Hi Guido
Thanks for the best wishes I must admit that the addition of the AM unit
has had a very positive influence on me listening to more music which is
always a good thing.
Sadly the UK and in paticular in the North were I am from (Liverpool) we
do not have much problem with it being too
Hi Guido
The Krell KSA50 is the mark one unit the original all class A amp and it
very big and very heavy. The Soundstyle rack I have it in has a double
sized shelf at the bottom and the Power amp has at least 4/5 inches of
space above it for air circulation . Plus the amp is lifted up on some
Hi Guido
Because of the wat my system is stacked the AM unit has to be on the top
and my power amp is right at the bottom . I strive to keep my inter
connects as short as possible and I do not have a 1mtr plus at the
moment to connect the AM direct. So not have not tried it direct as yet.
Might
I would echo the advice of the others but would also suggest that you
consider doing one or both of the following. One load the Triode EDO App
this does seem to help the SBT and adds some naturalness to the output
(I am talking about digital only as that is all I use ) . Two take the
time and
I have an SBT and have loaded the Triode EDO App mainly in the past for
the digital out via Coaxial SPDIF . I have recently bought an Anti -
Mode 2.0 Dual Core
http://www.dspeaker.com/en/products/20-dual-core.shtml.
The unit only has SPDIF in and out as Toslink or USB and I wanted to use
the USB
Hi Guido
I bought the Anti Mode for the roomcorrection functions and was really
surprised at how bad my room was when I saw the red line readings after
calibration they looked like the Alps . What is more important thought
is how much better the sound was when the correction was applied with so
As someone who has had a few problems with their SBT in the few months
since I have owned it I should be in agreement with the OP . However I
have to say that I really do disagree on many levels.
As a product that works right out of the box the SBT was for considering
what I now realise is the
I have looked at this a few ways and tried the following .
1) Delete Cache
2) Full Library clear and rescan
3) Change the USB Drive (I have three 1TB drives all with the full music
folder on) Set the Library to use this new folder only , Delete Cache ,
Library clear and rescan .
None of
I am a new user of the SBT and in many (but not all) of the albums in my
music each track is shown twice and if played it will play each album
twice. I have my storage which is a 1Tb USB HD attached to my lap top
which is wired directly to my router and then there is a wired ethernet
connection
Can anyone recommend a cheap Android Tablet that works ? It needs to be
available in the UK and preferably as cheap as possible. I will only
probably use it as the remote for the SBT so not that bothered if it not
the fastest for browsing etc so long as it works well with an app to
control the
Thanks for your replay I will have to look at some of these. However as
I only have files in Flac format I do not use iTunes and do not have it
on my Laptop so thath can not be the cause of this problem in my case .
Will try and look at the others. I have checked the actual folders and
each case
praganj wrote:
I have Buffalo II DAC, this DAC has also I2S input.
How to get I2S data stream from SBT ? Any chance ? Some USB-I2S
converter ?
Any idea ?
The short answer is yes you can get the I2S data out of an SBT and I
have seen some sites with SBT,s connected this way. However there
15 matches
Mail list logo