My squeezebox is showing that there is an update available.
It says: Begin Update 7.8.0 r16754
Then says DOWNLOADING
Then is says: There was a problem installing this update. Please try
again or contact support.
I've tried multiple times with the same error. Any suggestions on how
to remedy
Redrum wrote:
> One of my thoughts was to swap out the touch for another that you have,
> to see if it's the specific player.
>
> I decided to search on "squeezebox touch wifi not working" and there
> were several related threads in this forum in the results. This one
> looked interesting and
Paul Webster wrote:
> Maybe it has decided that the WiFi card is faulty and is not offering
> options related to it.
>
> Perhaps if you enable SSH access to the Touch and have a look "inside"
> via operating system commands you might be able to find out a bit more.
I have no idea what SSH
Redrum wrote:
> I don't have a touch handy, so I'm foggy on the setup, but, the original
> state of the touch in your first post (my music and settings only) is
> how one of my touches looks after a power failure. The touch has come
> back up after power restore, but the network has not (takes
ews2k wrote:
> I had issues with a brand new sealed-in-the-box Touch last year when I
> first used it. Immediately it wanted to update. I had all sorts of
> issues following the update (documented on this forum somewhere).
> Eventually, I let it download and re-install the firmware update, all
tdehan wrote:
> I noticed yesterday that one of my 3 Touch devices was sitting at a
> screen that said only My Music and Settings. When I select My Music it
> does not allow me to connect to anything. When I select Settings it
> says the network is disconnected. All my other wire
I noticed yesterday that one of my 3 Touch devices was sitting at a
screen that said only My Music and Settings. When I select My Music it
does not allow me to connect to anything. When I select Settings it
says the network is disconnected. All my other wireless devices are
connected to the
Checked. That's not the issue.
tdehan's Profile: http://forums.slimdevices.com/member.php?userid=65180
View this thread: http://forums.slimdevices.com/showthread.php?t=114651
I have 3 Touch devices. The screen saver on 2 of them has stopped
working. It has been set to Black Digital Clock when stopped or off and
Transparent Digital Clock when not playing. However, the clock screen
savers never come up. The 2 units just sit at whatever screen I touched
last. Is
I have 3 Touch units and one older Squeezebox 2 units. The Squeezebox 2
and two of my Touch units show all of my Pandora stations. However, one
of the Touch units does not. It shows most of my stations but not all
of them.
My Galaxy phone shows all of my Pandora stations. And when I go to
I have 3 Touch units. When looking at the Player information under the
General tab up on MySqueezebox.com only one of my Touch units shows the
Firmware version. The other 2 do not. Also, what is the latest
firmware version?
Player with Firmware Version listed:
29897
Player with no Firmware
I was just prompted to update LMS to latest build (7.9.2 - 1578996832)
which I did and lost my Pandora application. What's with that? When I
click on Apps, it no longer shows Pandora but instead shows:
WWW.MYSQUEEZEBOX.COM REFUSED TO CONNECT.
I can log into www.mysqueezebox.com and it shows
All 3 of the remote controls for my 3 Touch devices are getting sticky
and look wet! I first though perhaps the batteries were leaking but
that is not the case. Is anyone else experiencing this? It's almost
like the plastic material is oozing.29043
Response in sequence:
- To each his own!
- I am aware that the Touch devices have the screensaver in the menus of
the players themselves. As I stated, I tried configuring that in the
Touch menu and it would work for a brief period of time and then go back
to staying on the screen of the last
No decent feedback from the OP?
With that said, I do know that when I first got into SlimDevices almost
20 years ago, the screensaver function was indeed configured from the
application. Perhaps by default when I replaced all my older devices
with the 3 Touches I now have many years ago I
Nope!
tdehan's Profile: http://forums.slimdevices.com/member.php?userid=65180
View this thread: http://forums.slimdevices.com/showthread.php?t=111266
___
Touch mailing list
One of my 3 Touch devices does not go into SLEEP. I've configured it to
show the TIME when it's not playing but it never does it. It always
stays at the screen of the song that was playing.
Is there a way to fix this? Do I need to RESET the device? If so, how
does one perform a reset?
When I go to Pandora.com is shows all of my stations including the
newest one I added, *Hipsters Cocktail Party*. However, when I look
through the list on my Touch, Hipsters Cocktail Party is not listed. It
shows up on all of my computers and cell phones, just not the Touch.
Why is that?
With all 3 of my other Touch units, when I stop playing music it goes to
sleep after a time and displays the clock. I thought this was something
that was configured through the web application. However, now upon
looking I no longer see that option.
There is a SLEEP option on the Touch itself
Really? No one??
tdehan's Profile: http://forums.slimdevices.com/member.php?userid=65180
View this thread: http://forums.slimdevices.com/showthread.php?t=110577
___
Touch
Bingo! Thanks!
tdehan's Profile: http://forums.slimdevices.com/member.php?userid=65180
View this thread: http://forums.slimdevices.com/showthread.php?t=110154
___
Touch
How do I get the album cover art besides the track title and number on
the screen? We had a power outage and now when I play an album through
the Touch it only displays a large album cover art image. How do I get
it to again show the album cover art image along with the track number
and title
Ah...never mind...I fixed it by creating a custom Firewall rule per
these instructions.
https://forums.slimdevices.com/showthread.php?86162-quot-No-Squeezebox-Server-Found-quot-after-W7-SP1-update/page3
tdehan's Profile:
Turning off Windows Firewall fixes the issue. However, I would prefer
to not disable Windows Firewall. Is there some particular configuration
setting I can do to allow LMS to work again? According to Windows
Firewall, LMS is allowed through the Firewall but obviously it is being
blocked.
Man in a van wrote:
> rtfm :)
As I stated prior, I did attempt a factory reset by holding down the
little button in the back until the unit rebooted. However, it did not
appear to reset the Touch as it automatically connected to my wireless
network without having to re-input the encryption
DJanGo wrote:
> One of the 3rd party plugins you didnt use but shows up in your
> server.logfile
>
> [18-12-08 08:47:28.9736] Slim::Plugin::MusicMagic::Plugin::initPlugin
> (155) Can't connect to port 10002 - MusicIP disabled.
So, is this a concern? As mentioned, I have no 3rd party plugins
sgmlaw wrote:
> Resetting your Touch is not going to solve this. The problem is on the
> server side. From your log, LMS is choking on startup after a system
> reboot.
>
> As I mentioned, Win10 is constantly being updated with feature
> additions. Excessively so. It is possible that one of
Man in a van wrote:
> Well the point is. to do a clean install, first one must do a clean
> uninstall.
>
> You'll have to ask sgmlaw
>
>
>
>
> I had a quick look through the wiki, but you are going to help yourself
> with that one, I don't have the time. Here is list of file locations, it
Man in a van wrote:
> I use the free version of
>
> https://www.revouninstaller.com/revo_uninstaller_free_download.html
>
> to uninstall any program on my Windows OS.
>
> You might have to search in App data and elswhere to remove all of LMS.
>
> When you re-install, right click the .exe
bpa wrote:
> You mean there is only one entry for squeezesvr.exe ?
If you are asking me, I never stated there was only one entry for
squeezeserver.exe in the Windows Firewall configuration. There are 8
listings under Windows Firewall
26206
Man in a van wrote:
> What has changed with your system since before "whenever I now"
>
> Was there a period when you did not use LMS and the SBTouch?
>
> Which ant-virus are you using?
Yes there was quite a long period prior to using the server with the
Touch. I've been mostly playing
sgmlaw wrote:
> Ok. Now try rebooting the host machine and after LMS is started and
> running, try rebooting the client to see if the Touch can reach LMS
> after it runs its startup routine. Just to confirm it is not a software
> firewall glitch, temporarily disable your local windows firewall
bpa wrote:
> Correct. The question is what address are the players trying to contact
> after LMS reboots. If it is the correct IP address - then the Windows
> system is blocking the player - probably a firewall issue which is reset
> when LMS is re-installed but is not retained after reboot..
DJanGo wrote:
> remove ALL 3rd party plugins
> make sure your harddrive has some free space
> try again
Remove 3rd party plugins from what/where? With regards to hard drive
space there is over 2TB of unused space on the drive LMS is installed
on.
JohnB wrote:
> Silly question: why not just go ahead an set a static IP address for the
> PC? There is nothing to lose, is there?
That is a silly question...especially since I've never had to do that
prior.
tdehan's
sgmlaw wrote:
> That the clients are being recognized at all rules out several
> possibilities, such as an overly aggressive anti-virus/AMW or some
> software firewall blocking on the host machine.
>
> The question is whether the clients remain recognized by LMS if the
> server machine and LMS
bpa wrote:
> Does the IP addrerss of the LMS server change before and after rebooting
> ?
No. The IP remains the same after rebooting.
tdehan's Profile: http://forums.slimdevices.com/member.php?userid=65180
View this
Alright. I just rebooted the computer and the issue happens again.
Attached is the log file.
26202
+---+
|Filename: server.log.zip |
|Download:
My guess is that something is odd with LMS. I have 3 Touches and one
Classic and none of them get recognized when I boot up my Windows 10
machines dedicate to my music until I now re-install LMS each time.
Something is very peculiar.
sgmlaw wrote:
> It is sometimes not so much the server machine not seeing the Touch as
> the Touch not seeing the server.
>
> One of the best things you can do in any server-based environment is
> assign a fixed local IP address to the server machine itself.
>
> This will make the clients'
mherger wrote:
> > I am running Windows 10 1803 Build 17134.407
> > Not clear what you question is about LMS running after the reboot.
> > However, if you are asking does LMS launch automatically after a
> reboot
> > the answer is yes. Upon reboot however, it does not wake up the
> Touch
> >
I am running Windows 10 1803 Build 17134.407
Not clear what you question is about LMS running after the reboot.
However, if you are asking does LMS launch automatically after a reboot
the answer is yes. Upon reboot however, it does not wake up the Touch
Squeezebox like it should. The Touch
For whatever reason whenever I now launch LMS it cannot find my
Squeezebox Touch. At the same time the Touch cannot locate LMS.
However, if I re-install LMS everything see each other just fine and I
can play my music. But, the next time I re-boot the computer it happens
all over again and I
kidstypike wrote:
> Hmm, what about > Touch > Home > Settings > Advanced > Networking >
> Remote Libraries > Add New Library > enter the IPaddress of the computer
> that's running LMS.
Doesn't work either. I added the IP address and when I goes to connect
it tries to connect to the old name.
kidstypike wrote:
> On your Touch > My Music > Switch Library.
>
>
> 26046
I already tried that. When I select Switch Library it keeps going to
the old name.
tdehan's Profile:
I recently rebuilt my computer that houses all of my music. At the time
of rebuild I also renamed the computer. Now when I try to connect my
Touch to the renamed computer it keeps trying to connect to the old
name. I can't find anywhere to force the Touch to see the newly named
computer. How
46 matches
Mail list logo