29240
+---+
|Filename: thumbs_up_100x100.jpg|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29240|
+---+
*
So Yes. I wound up moving the power adaptor to my MOCA Fios extender in
my office, And the SBT remains in my family room as has always been the
case. Its been up and running for 24 hours with no WiFi drops. I realize
this is not as good as having a Ethernet cable directly from router to
touch, bu
Mycenius wrote:
> FWIW @gellie Someone has a similar/related issue with SBT, EDO and USB
> DAC...:
>
> 'SBT (EDO) does not work via USB with L.K.S Audio MH-DA004'
> (https://forums.slimdevices.com/showthread.php?94512-Announce-Enhanced-Digital-Output-app-USB-Dac-and-192k-Digital-Ouput&p=962525#p
FWIW @gellie Someone has a similar/related issue with SBT, EDO and USB
DAC...:
'SBT (EDO) does not work via USB with L.K.S Audio MH-DA004'
(https://forums.slimdevices.com/showthread.php?94512-Announce-Enhanced-Digital-Output-app-USB-Dac-and-192k-Digital-Ouput&p=962525#post962525)
*Hi-Fi 1*: Q
gellie wrote:
> BTW I thought the SBT runs only on 2.4ghz? If not, how do I point it to
> my 5ghz system? My Orbo mesh automatically attaches everything to 5ghz
> if capable. Yet I only see the SBT on my 2.4ghz ?
Yeah - sorry - my typo - I meant to say would NOT recommend - I had
forgotten it d
slartibartfast wrote:
> The SBT doesn't connect to a 5GHz WLAN.
>
> Sent from my Pixel 3a using Tapatalk
Good spot - typo I meant to say 'would not'
*Hi-Fi 1*: QNAP HS-453DX NAS+QLMS/Allo USBridge Signature+Shanti
LPS/Cirrus ESS Sabre 32-bit Reference DAC (Oppo 105D)/Yamaha Aventage
CX-A500
Mycenius wrote:
> Just further FWIW to clarify I have about 20 devices in my home on the
> network (2-storey house) and I only have 5-6 on my Wi-Fi WLAN; being my
> SBT in my secondary set-up (in master bedroom upstairs) and my fiancée's
> and my mobile devices (3 iPhones & 2 iPad Minis between u
Mycenius wrote:
> Just further FWIW to clarify I have about 20 devices in my home on the
> network (2-storey house) and I only have 5-6 on my Wi-Fi WLAN; being my
> SBT in my secondary set-up (in master bedroom upstairs) and my fiancée's
> and my mobile devices (3 iPhones & 2 iPad Minis between u
gellie wrote:
> I have a relatively new Fios router and a Orbi Mesh system with 3
> satellites. I must have at least 25 items connected with out any
> problems
Mycenius wrote:
> ...if you have 25 devices in your home all connected to the same single
> WLAN then IMHO you will have ongoing bandwi
gellie wrote:
> Thanks. I dont know if its possible to run 2 WLAN's
Your router may not support it. If you have dedicated WAPs they should
(i.e. you don't use a consumer 'all-in-one' router).
gellie wrote:
> I would have to get someone to run a cable from my router(basement) to
> SBT (1st f
Mycenius wrote:
> FWIW I'd be a bit concerned if you have that many active devices on the
> single Wi-Fi - mesh or no mesh - basically if even ¼ are all doing stuff
> at the same time there will not be much bandwidth per device... Again
> FWIW if it was me I'd be running 2 WLANs (2.4GHz) at oppos
gellie wrote:
> Yea. Im starting to really think my problem is in the wireless on the
> SBT. I have a relatively new Fios router and a Orbi Mesh system with 3
> satellites. I must have at least 25 items connected with out any
> problems
FWIW I'd be a bit concerned if you have that many active de
Man in a van wrote:
> Larry
>
> some random thoughts
>
>
>
>
>
> Do you know the renewal interval for the dhcp IP Address lease in the
> router? Normal is 24 hours I think.
>
> If the SBT is switched off longer than the renewal interval then the
> router will treat it as new, although it
Larry
some random thoughts
Do you know the renewal interval for the dhcp IP Address lease in the
router? Normal is 24 hours I think.
If the SBT is switched off longer than the renewal interval then the
router will treat it as new, although it may give it the same address.
Can you reserve
Man in a van wrote:
> Simply, wireless or ethernet into the SBTouch ?
>
> The thing is, 192/24 over wireless should not really be a problem, maybe
> relocating the Router (higher is often advised on the internet) or
> running a long Ethernet cable (I use a flat, 30 metre one from router to
> sw
Man in a van wrote:
> Simply, wireless or ethernet into the SBTouch ?
>
> The thing is, 192/24 over wireless should not really be a problem, maybe
> relocating the Router (higher is often advised on the internet) or
> running a long Ethernet cable (I use a flat, 30 metre one from router to
> sw
gellie wrote:
> Hi Ronnie. Thanks for looking into this. I currently have my SBT
> connected to the Oppo via USB. What do you mean by streaming method
> used?
>
> Larry
Simply, wireless or ethernet into the SBTouch ?
The thing is, 192/24 over wireless should not really be a problem, maybe
rel
Man in a van wrote:
> I think there is a bit of confusion creeping in to the discussion. :)
>
>
> EDO will only do 192/24 bit
>
> Looking briefly on-line (I obvs don't have the dac :rolleyes:)
>
> I found reference to the Oppo have a 32 but digial volume control
>
> https://soundstagexperie
I think there is a bit of confusion creeping in to the discussion. :)
EDO will only do 192/24 bit
Looking briefly on-line (I obvs don't have the dac :rolleyes:)
I found reference to the Oppo have a 32 but digial volume control
https://soundstagexperience.com/index.php/letters-menu/504-oppo-b
gellie wrote:
> Thanks I'll check the Oppo settings to see if the USB is set for 32 bit
@gellie - its not the Oppo you need to check ;) It 'requires'
connections that are set to 32-bit... You need to check the settings on
your USB output source software (i.e. the SB Touch, or in EDO?).
P.S. Y
Mycenius wrote:
> The Oppo 105 Sabre DAC is one of the type that needs to be set to 32-bit
> always for the source of the USB connection - so it could be an issue
> with the software setting for the player if it's not the Touch's
> internal O/S Squeezelite Player?
>
> I have a 105D and used to
The Oppo 105 Sabre DAC is one of the type that needs to be set to 32-bit
always for the source of the USB connection - so it could be an issue
with the software setting for the player if it's not the Touch's
internal O/S Squeezelite Player?
I have a 105D and used to use my Touch with it all the
Leave the Touch on overnight.
Chris :)
Stratmangler's Profile: http://forums.slimdevices.com/member.php?userid=20387
View this thread: http://forums.slimdevices.com/showthread.php?t=111529
___
So I hooked up the touch to the oppo via coax. Turned everything off
overnight. Rebooted up this morning fine. But, I had to initially select
analog/digital as output. Digital only did not work.
gellie's Profile: http://fo
Stratmangler wrote:
> I doubt that you'll hear a difference.
Thanks
gellie's Profile: http://forums.slimdevices.com/member.php?userid=34468
View this thread: http://forums.slimdevices.com/showthread.php?t=111529
___
Man in a van wrote:
>
>
> I'll now switch off the dac, leave the SBT on and see what happens
> tomorrow (I'll tie a knot in me sock):)
>
> ronnie
>
>
After a bit of limping around this morning, the penny dropped :rolleyes:
Switchthe dac back on and it registered correctly.
ronnie
-
gellie wrote:
> So the only difference between USB vs COAX is 24/192 vs 24/96?
> If Im running only 24/96 will there be a difference in SQ between USB
> and COAX?
I doubt that you'll hear a difference.
Chris :)
Stratmang
Stratmangler wrote:
> Been running EDO on my Touch via the coax output into my external DAC
> for what seems like forever.
> Hook the Touch up with coax into the Oppo.
> You can turn both off if you want, and things will work fine when you
> turn the 2 devices on.
>
> I did look at the Oppo man
Been running EDO on my Touch via the coax output into my external DAC
for what seems like forever.
Hook the Touch up with coax into the Oppo.
You can turn both off if you want, and things will work fine when you
turn the 2 devices on.
I did look at the Oppo manual, and it does not accept 24/192
I have not used this method of playback for several years.
I seem to remember that if I disconnected the dac, then I would have to
reboot on reconnection of the dac. But I know that Triode intended to
make it hot-plugable.
You don't have the other LMS running now, at the same time as the Roon
e
Man in a van wrote:
> have you asked over on the roon forum
>
>
> https://community.roonlabs.com/t/still-squeezebox-touch-not-seen-by-roon/51463/9
>
>
> 29139
No I haven't. I was experiencing this problem when I was running LMS as
well.
have you asked over on the roon forum
https://community.roonlabs.com/t/still-squeezebox-touch-not-seen-by-roon/51463/9
29139
+---+
|Filename: roon.jpg |
|Download: http://forums.s
Man in a van wrote:
> Just tried this with an IfI Nano usb dac.
>
> Connected it up and selected it as output, sconfirmed it running from
> the info stream.
>
> Switched the dac off.
>
> Waited a little while and on the SBT went to Settings > advanced >
> select audio output > digital output
Man in a van wrote:
> Settings > Advanced > Digital Output > Select Audio Output > Click on
> the info stream, does it confirm the dac is running
>
> Have you tried the above and selected Digital only for the audio output
> and used a coax ro toslink spdif connection into the dac.
>
> How is
Just tried this with an IfI Nano usb dac.
Connected it up and selected it as output, sconfirmed it running from
the info stream.
Switched the dac off.
Waited a little while and on the SBT went to Settings > advanced >
select audio output > digital output >
two outputs listed
Analog + digital
Settings > Advanced > Digital Output > Select Audio Output > Click on
the info stream, does it confirm the dac is running
Have you tried the above and selected Digital only for the audio output
and used a coax ro toslink spdif connection into the dac.
How is the dac powered ?
Try connecting
Having never used EDO, or even a USB DAC on the Touch, I'm not familiar
with the way the DAC is selected. Does it show up as a list of possible
output devices, e.g.:
Code:
sysdefault:CARD=DAC
front:CARD=DAC,DEV=0
surround21:CARD=DAC,DEV=0
surround40:CARD=DAC,DEV
gellie wrote:
> So I left the Oppo on all night and power off the touch. Still had to
> reselect digital output Oppo and reboot for it to work. Anybody have
> ideas?You could leave the Touch on. I never turn mine off.
Sent from my Pixel 3a using Tapatalk
So I left the Oppo on all night and power off the touch. Still had to
reselect digital output Oppo and reboot for it to work. Anybody have
ideas?
gellie's Profile: http://forums.slimdevices.com/member.php?userid=34468
View
So it looks like the disconnect occurs when I power off the Oppo.
Despite having it programmed to boot up on USB input. Is there some
setting I need to change on the Oppo ?
gellie's Profile: http://forums.slimdevices.com/m
When I power off Touch and Oppo I need to go through the same reboot
even time to get it to work:
Advanced/Digital output/select audio output/digital only===> reboot
after reboot:
Settings/advanced/digital output/ select audio output/USB audio
Oppo> reboot
Is this correct or do I have so
41 matches
Mail list logo