On Wed, Apr 01, 2009 at 10:02:14PM -0500, Tom Rix wrote:
> +#define SECTORSIZE 512
> +
> +#define NAND_ALLOW_ERASE_ALL
> +#define ADDR_COLUMN 1
> +#define ADDR_PAGE2
> +#define ADDR_COLUMN_PAGE 3
> +
> +#define NAND_ChipID_UNKNOWN
I can't find anywhere in the datasheet that says the status register needs
3 dummy bytes sent to it before being able to read back the first real
result. Tests on a Blackfin board show that after writing the opcode, the
status register starts coming back immediately. So only write out the
read st
On Thursday 02 April 2009 12:21:54 Sanjeev Premi wrote:
> cpu/arm_cortexa8/omap3/board.c |2 +-
you're fixing a specific board or board family, so please put that into the
subject line. "Fix compile issue" might be ok if it were an error in the top
level build files, but this isnt ...
-mike
move to linux usb driver organisation
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
Cc: Remy Bohmer
---
Remy is this one ok for you?
I've try to respect the usb driver linux organistation at maximum
Best Regards,
J.
Makefile |4 +-
drivers/seri
Dirk,
On Tue, Mar 31, 2009 at 05:55:13PM +0200, Dirk Behme wrote:
> ... I'd like that we split general ticks/timer code clean
> up and bug fixes. I'd like that we implement the changes proposed by
> Mike and Jean-Christophe independent and don't mix them with other
> fixes for broken timer code
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message <20090402112949.gc2...@game.jcrosoft.org> you wrote:
>
> > Please suggest where and when? Make this merge window longer by one
> > week, and this testing phase longer by two weeks?
> why not create a release to integrate the Kconfig?
You would s
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message <1238691332-27548-1-git-send-email-plagn...@jcrosoft.com> you wrote:
> move to linux usb driver organisation
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
> Cc: Remy Bohmer
> ---
> Remy is this one ok for you?
Looks OK to me, but..
> di
Sanjeev Premi wrote:
> Fixes this compile error:
> board.c: In function 'do_switch_ecc':
> board.c:339: error: 'cmd_tbl_t' has no member named 'help'
> make[1]: *** [board.o] Error 1
> make[1]: Leaving directory
> `/db/psp_git/users/a0756819/u-boot/cpu/arm_cortexa8/omap3'
> make: *** [cpu/arm_cort
> -Original Message-
> From: Dirk Behme [mailto:dirk.be...@googlemail.com]
> Sent: Thursday, April 02, 2009 11:48 PM
> To: Premi, Sanjeev
> Cc: u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH] Fix compile issue
>
> Sanjeev Premi wrote:
> > Fixes this compile error:
> > board.c: In fun
Rename the pci header for FSL HW so we can move some prototypes
in there and stop doing explicit externs
Signed-off-by: Kumar Gala
---
board/atum8548/atum8548.c |2 +-
board/freescale/mpc8536ds/mpc8536ds.c |2 +-
board/freescale/mpc8544ds/mpc8544ds.c |2 +-
bo
Signed-off-by: Kumar Gala
---
board/atum8548/atum8548.c |7 ---
board/freescale/mpc8536ds/mpc8536ds.c |6 --
board/freescale/mpc8544ds/mpc8544ds.c |6 --
board/freescale/mpc8548cds/mpc8548cds.c |6 --
board/freescale/mpc8568mds/mpc8568mds.
Hi Detlef,
Detlef Vollmann a écrit :
> Change at91 CPUs based on arm926ejs to return milliseconds
> from get_timer and get_ticks. Also changes in the value of
> CONFIG_SYS_HZ to 1000 in all board configs using these CPUs.
> This will not compile on boards using these CPUs with a
> different
Hi:
Was going through the patch for uboot posted earlier this year and the
related review comments here:
http://www.mail-archive.com/u-boot@lists.denx.de/msg01140.html.
>From the thread, it looks like no one is working on the u-boot nand
boot on imx31 pdk. Please correct me if i am wrong.
I wa
On 21:11 Thu 02 Apr , Eric BENARD wrote:
> Hi Detlef,
>
> Detlef Vollmann a écrit :
> > Change at91 CPUs based on arm926ejs to return milliseconds
> > from get_timer and get_ticks. Also changes in the value of
> > CONFIG_SYS_HZ to 1000 in all board configs using these CPUs.
> > This will
On 12:59 Thu 02 Apr , Mike Frysinger wrote:
> On Thursday 02 April 2009 12:21:54 Sanjeev Premi wrote:
> > cpu/arm_cortexa8/omap3/board.c |2 +-
>
> you're fixing a specific board or board family, so please put that into the
> subject line. "Fix compile issue" might be ok if it were an er
Hi Jean Christophe,
Jean-Christophe PLAGNIOL-VILLARD a écrit :
> On 21:11 Thu 02 Apr , Eric BENARD wrote:
>> I confirm that this patch is fixing timeout problems with tftp downloads
>> on a SAM9260.
>> What is blocking from pushing it mainline ?
> see response e-mail and please note that the
Jerry Van Baren wrote:
> Mike Frysinger wrote:
>> On Thursday 02 April 2009 08:32:00 Detlev Zundel wrote:
not so long ago there was some custom thingy that was running on the
u-boot website that'd automatically grab patches from the mailing list
and try to file them away so they woul
On 20:07 Thu 02 Apr , Wolfgang Denk wrote:
> Dear Jean-Christophe PLAGNIOL-VILLARD,
>
> In message <1238691332-27548-1-git-send-email-plagn...@jcrosoft.com> you
> wrote:
> > move to linux usb driver organisation
> >
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
> > Cc: Remy Bohmer
>
Scott Wood wrote:
> More legacy NAND stuff. You should probably go through the config and
> clean out anything that isn't verifiably necessary.
>
>
This has been removed from Zoom2 and Zoom1.
Other modifications to the zoom configs will follow after this initial
patch set.
Tom
__
On 20:00 Thu 02 Apr , Wolfgang Denk wrote:
> Dear Jean-Christophe PLAGNIOL-VILLARD,
>
> In message <20090402112949.gc2...@game.jcrosoft.org> you wrote:
> >
> > > Please suggest where and when? Make this merge window longer by one
> > > week, and this testing phase longer by two weeks?
> > wh
On 22:02 Wed 01 Apr , Tom Rix wrote:
> https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP
>
> The zoom2 has an auxillary board that contains the serial, net, jtag and
> battery simulator. This change supports a runtime check if the debug board i
On 22:02 Wed 01 Apr , Tom Rix wrote:
> Zoom2 is a new board from Texas Instruments and LogicPD
> This is the product description
> http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
>
> This patch provides a zoom2 base target by copying zoom1 and by
On 22:02 Wed 01 Apr , Tom Rix wrote:
> Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board.
> The default serial is from the USB connector on left side of the debug board.
> The USB connector will produce 2 of the 4 UARTS. On your host pick the first
> enumeration.
>
On 10:41 Mon 23 Mar , Haavard Skinnemoen wrote:
> Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 09:58 Mon 23 Mar , Nicolas Ferre wrote:
> > > The MACB IP used by AVR32 & AT91 have two different layout for USRIO
> > > register. We have to differentiate this in the driver code.
> > > No more
This brings it in line with other Freescale boards.
Signed-off-by: Scott Wood
---
include/configs/MPC8260ADS.h | 42 ++
1 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 42fb
Signed-off-by: Scott Wood
---
cpu/mpc8260/cpu.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index 1b034cd..d4622ca 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -311,6 +311,9 @@ void ft_cpu_setup (void *blob, bd_t *b
Without this, u-boot can crash or print garbage if the original link
address no longer points to a valid string.
Signed-off-by: Scott Wood
---
I sent this a couple weeks ago hoping to make it in as a bugfix, but it
didn't make it. Do you have any objections to the patch, or can it go in
this mer
Wolfgang,
Can this be put in the ToDo list so anyone who looks to clean up their
CPU and/or architecture knows what it is exactly that we are trying to
achieve
Thanks,
Graeme
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/lis
Hi Michael,
Michael Zaidman wrote:
> On Thu, Apr 2, 2009 at 3:47 PM, Detlev Zundel wrote:
>
>
>>> I have to enable the git operation via gmail on my workstation.
>>>
>> What do you mean by this? Usually you only need a mailer which is
>> capable to attach things inline. Even better -
Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 10:41 Mon 23 Mar , Haavard Skinnemoen wrote:
>
>> Jean-Christophe PLAGNIOL-VILLARD wrote:
>>
>>> On 09:58 Mon 23 Mar , Nicolas Ferre wrote:
>>>
The MACB IP used by AVR32 & AT91 have two different layout for USRIO
register
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message <20090402192755.gb15...@game.jcrosoft.org> you wrote:
>
> if Remy is ok
> could apply the at91 pull request then I will generate the final usb
> reorganisation patch?
That should go through the USB custodian tree.
Best regards,
Wolfgang Denk
--
This brings it in line with other Freescale boards.
Signed-off-by: Scott Wood
---
This time with ttyCPM0, not ttyS0.
include/configs/MPC8260ADS.h | 42 ++
1 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/include/configs/MPC8260ADS.h b/inc
Hi,
I am using u-boot version 2009.03-rc1 for davinci DM6467 EVM. I have set
CROSS_COMPILE=arm_v5t_le- and ARCH=arm.
On trying make davinci_dvevm_config I get an error:
ln : creating symbolic link "asm" to "asm-arm" : Opertaion not permitted
Any pointers to how this build enviro
This patch fix the wrong gpio offset
Signed-off-by: Minkyu Kang
---
include/s3c6400.h |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/s3c6400.h b/include/s3c6400.h
index fd3e99b..1da85a1 100644
--- a/include/s3c6400.h
+++ b/include/s3c6400.h
@@ -215,9 +215,9
Hi,
Sorry. This was an error due to location of code in a shared filesystem in
vmware machine.
I was able to build after I moved code to another filesystem.
Thanks,
Neeraj
--- On Thu, 4/2/09, Neeraj Tandon wrote:
From: Neeraj Tandon
Subject: [U-Boot] make davinci_dvevm_config error
To:
Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 22:02 Wed 01 Apr , Tom Rix wrote:
>
>> https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP
>>
>> The zoom2 has an auxillary board that contains the serial, net, jtag and
>> battery simulator. This ch
thanks Jerry Van Baren-7
sorry about my postpone replying
the problem have solved some days ago, thanks for your suggestion about
clocks configurate, though it's
not clocks' bussiness.
the register cmx_uar is mistake, i have fixed it up by manual. everything is
done
later i will take the details
Dear Wolfgang,
Please pull git://git.denx.de/u-boot-fdt.git master. These are bugfixes
from dtc/libfdt and resynchronizes us.
Thanks,
gvb
The following changes since commit ed9953d6903c9673135a96ae1644f61cb0eac5ce:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boo
On 01:06 Fri 03 Apr , Wolfgang Denk wrote:
> Dear Jean-Christophe PLAGNIOL-VILLARD,
>
> In message <20090402192755.gb15...@game.jcrosoft.org> you wrote:
> >
> > if Remy is ok
> > could apply the at91 pull request then I will generate the final usb
> > reorganisation patch?
>
> That should go
2009/4/2 alfred steele :
> Hi:
>
> Was going through the patch for uboot posted earlier this year and the
> related review comments here:
>
> http://www.mail-archive.com/u-boot@lists.denx.de/msg01140.html.
>
> From the thread, it looks like no one is working on the u-boot nand
> boot on imx31 pdk.
Hi all,
I want to boot linux by a simplified bootloader. I use Atmel's ARM
chip (AT91SAM9RL64EK board). Now, I can boot linux with my small
program. The small program will parse the image generaed by "mkimage"
and copy the kernel bianry from NAND flash to SDRAM, construct the tag
list, disable I/D
From: prafulla_wadaskar
This debug_prints strategy provides-
A. pre-formatted debug and print macros to be used in a code
B. flexiblility to enable selective debug prints without
modifying a source code
For more details refer doc/README.debug_prints
Signed-off-by: prafulla_wadaskar
---
conf
From: prafulla_wadaskar
In some cases the u-boot.bin need to be processed further
to create bootable u-boot binary from boot device
This processing may be cpu,soc and/or board spcific
bin_dep.sh provides a mechanism to execute bin_dep.sh
if present in above platform specific folders
Signed-off-b
From: prafulla_wadaskar
Added macronix SF driver for MTD framework
MX25L12805D is supported and tested
TBD: sector erase implementation, other deivces support
Signed-off-by: prafulla_wadaskar
Tested by: prafulla_wadaskar
---
drivers/mtd/spi/Makefile|1 +
drivers/mtd/spi/macronix.c |
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message <20090402053526.gn14...@game.jcrosoft.org> you wrote:
> On 22:02 Wed 01 Apr , Tom Rix wrote:
> > Divisor field is called PTV not PVT.
> >
> > This change is needed because of earlier OMAP commit
> > 81472d893fa565c9d300928a40e504a689bde131
> >
On Thu, Apr 2, 2009 at 2:18 PM, Jean-Christophe PLAGNIOL-VILLARD
wrote:
> On 13:43 Thu 02 Apr , Kyungmin Park wrote:
>> Hi,
>>
>> If there's no objection, could you apply this patch to ARM git tree?
> Just one question
> is the OneNand always 16bits?
>
Sure as I know, there's no exception.
T
Dear support,
Am trying to configure out how to change my u-boot to be netconsole from serial
console.
When i key in help in my u-boot start-up, i didnt seen any nc command.
U-Boot> help
May i know how to enable netconsole.
By adding following in u-boot/include/configs/at91sam9260ek.h
#define C
Dear "ong",
In message <200904021526134849...@free2move.us> you wrote:
>
> Am trying to configure out how to change my u-boot to be netconsole from
> serial console.
I recomment to start by reading the documentation.
> When i key in help in my u-boot start-up, i didnt seen any nc command.
Th
>Dear eija_flight,
>In message <22840615.p...@talk.nabble.com> you wrote:
>
> During above initialization process of u-boot,
>
> 1. Does it conduct a test to all board hardware listed?
>No. In general, there is no testing performed. Minor exceptions from
>this rule exist, for example the RAM
On Thu, Apr 02, 2009 at 12:43:53AM +0200, Wolfgang Denk wrote:
> Dear Jean-Christophe PLAGNIOL-VILLARD,
>
> In message <20090331202939.gi24...@game.jcrosoft.org> you wrote:
> > On 11:19 Tue 17 Mar , Dirk Behme wrote:
> > > Fix OMAP3 timer handling to 1ms tick and CONFIG_SYS_HZ to 1000.
> > > C
From: Manikandan Pillai
Signed-off-by: Dirk Behme
Signed-off-by: Manikandan Pillai
Signed-off-by: Ladislav Michl
---
Changes from Dirk's patch which is replaced by this [2]:
* Fix conflicts after commit 81472d893fa565c9d300928a40e504a689bde131
Changes from Mani's original patch which is repl
Hi Stefan,
> your patch 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware
> diagnosis functions for inka4x0] introduced all kind of new defines in the
> ns16550.h header resulting in a warning on some 4xx platforms:
>
> [ste...@kubuntu u-boot (master)]$ ./MAKEALL ml300
> Configurin
On Thursday 02 April 2009, Detlev Zundel wrote:
> > I suggest to either remove this MSI_RI from the header again (it doesn't
> > seem to be used here) or rename it.
>
> Ok, so much for the plan to add the defines not bit by bit as needed,
> but register-wise, while we're there.
>
> I actually would
Hi,
>> }
>>
>> unsigned char mmc_board_init(void)
> unsigned char?
> why
in omap3_mmc.c, many functions return the unsigned char.
I don't know why too :(
but if we need it can be changed.
>> +switch (curr_device) {
>> +case 1:
>> +writel(readl(&t2_base->pbias_lite) | PBIA
Hello,
It is possible to use standalone apps to do memory operations?
If it is possible, then how to do it?
I've been able to exporting some functions for my standalone apps, but
getting hard time exporting the do_mem_xx functions..
please let me know if there's some way..
regards,
eija_flight
Signed-off-by: Mike Frysinger
---
MAINTAINERS |1 +
MAKEALL |1 +
Makefile |6 +-
board/bf538f-ezkit/.gitignore |1 +
board/bf538f-ezkit/Makefile | 57 +++
board/bf538f-ezkit/bf538f-ez
Signed-off-by: Mike Frysinger
---
MAINTAINERS |1 +
MAKEALL |1 +
Makefile|6 +-
board/bf526-ezbrd/.gitignore|1 +
board/bf526-ezbrd/Makefile | 58
board/bf526-ezbrd/bf526-ezbrd.c | 77 ++
Signed-off-by: Mike Frysinger
---
MAINTAINERS |1 +
MAKEALL |1 +
Makefile|5 +-
board/bf548-ezkit/.gitignore|1 +
board/bf548-ezkit/Makefile | 58 +++
board/bf548-ezkit/bf548-ezkit.c | 79 +++
Signed-off-by: Mike Frysinger
---
MAINTAINERS |1 +
MAKEALL |1 +
Makefile|5 +-
board/bf527-ezkit/.gitignore|1 +
board/bf527-ezkit/Makefile | 58 +++
board/bf527-ezkit/bf527-ezkit.c | 77 +++
Some more fixes and new boards (which were posted already).
Mike Frysinger (13):
Blackfin: bf548-ezkit: new board port
Blackfin: bf527-ezkit: new board port
Blackfin: bf538f-ezkit: new board port
Blackfin: bf526-ezbrd: new board port
Blackfin: bf518f-ezbrd: new board port
Blackfin: fix
Now that the common SPI flash code supports all the flashes, we can stop
using the old driver.
Signed-off-by: Mike Frysinger
---
board/bf533-stamp/Makefile|1 -
board/bf533-stamp/spi_flash.c |2 --
2 files changed, 0 insertions(+), 3 deletions(-)
delete mode 100644 board/bf533-stamp
Since the Blackfin timer code requires HZ to be 1000, barf on any board
that tries to use a different value.
Signed-off-by: Mike Frysinger
---
include/asm-blackfin/blackfin-config-post.h |8 ++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/include/asm-blackfin/blackfin
On Thursday 11 December 2008 16:16:29 Mike Frysinger wrote:
> On Wednesday 09 July 2008 18:37:06 Wolfgang Denk wrote:
> > In message Jason McMullan wrote:
> > > Add support for the Winbond W25X16/32/64 series of
> > > SPI Flash devices.
> >
> > Signed-off-by line is missing.
> >
> > > --- /dev/null
These patches have all been posted at one point or another, I'm just
collecting them all in my tree here:
git://git.denx.de/u-boot-blackfin.git sf
So if you have any complaints, now's the time !
Jean-Christophe PLAGNIOL-VILLARD (1):
mtd: add some at45 spi flash support
Mike Frysinger (
Signed-off-by: Mike Frysinger
Acked-by: Haavard Skinnemoen
---
drivers/mtd/spi/atmel.c |2 +-
drivers/mtd/spi/spi_flash.c |2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c
index fc924a2..c3b936f 100644
--- a/driver
From: Jean-Christophe PLAGNIOL-VILLARD
- AT45DB321D
- AT45DB161D
- AT45DB081D
- AT45DB041D
- AT45DB021D
- AT45DB011D
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Mike Frysinger
---
drivers/mtd/spi/atmel.c | 48 +++
1 files
From: Mingkai Hu
Add MTD SPI Flash support for S25FL008A, S25FL016A,
S25FL032A, S25FL064A, S25FL128P.
Signed-off-by: Mingkai Hu
Signed-off-by: Mike Frysinger
---
drivers/mtd/spi/Makefile |1 +
drivers/mtd/spi/spansion.c | 356
2 files change
Signed-off-by: Mike Frysinger
CC: Haavard Skinnemoen
---
drivers/mtd/spi/stmicro.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
index e401cd0..b43e9f4 100644
--- a/drivers/mtd/spi/stmicro.c
+++ b/drivers/mtd/spi/
The common SPI flash code reads the idcode and passes it down to the SPI
flash driver, so there is no need to read it again ourselves.
Signed-off-by: Mike Frysinger
Acked-by: Haavard Skinnemoen
CC: Jason McMullan
CC: TsiChung Liew
---
drivers/mtd/spi/stmicro.c |8 +---
1 files changed
Some SPI flash drivers like to have extended id information available
(like the spansion flash), so rather than making it re-issue the ID cmd
to get at the last 2 bytes, have the common code read 5 bytes rather than
just 3. This also matches the Linux behavior where it always reads 5 id
bytes from
Signed-off-by: Mike Frysinger
Acked-by: Haavard Skinnemoen
---
drivers/mtd/spi/Makefile |1 +
drivers/mtd/spi/spi_flash.c |5 +
drivers/mtd/spi/spi_flash_internal.h |1 +
drivers/mtd/spi/sst.c| 358 ++
4 files chan
On 10:18 Wed 26 Nov , Kyungmin Park wrote:
> Move machine specific code to smdk6400.
> Some board use OneNAND instead of NAND.
>
> Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w.
> So it's better to use macro instead of hard-coded value.
>
> Signed-off-by: Kyungmin Park
> --
On 19:36 Thu 02 Apr , Minkyu Kang wrote:
> This patch support the soft reset at s3c6410
>
> Signed-off-by: Minkyu Kang
> ---
> cpu/arm1176/cpu.c |4
> 1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c
> index 1e94f7d..cb13d9c 10
On Wednesday 01 April 2009 13:21:19 Jean-Christophe PLAGNIOL-VILLARD wrote:
> drivers/usb/{ => gadget}/Makefile| 19 +--
> drivers/usb/{ => gadget}/usbdcore_ep0.c |2 +-
> drivers/usb/{ => gadget}/usbdcore_mpc8xx.c |4 ++--
> drivers/usb/{ => gadget}/us
can we shorten/elongate (doesnt matter to me) the next release process ? the
original time frame was picked so as to not overlap with the linux kernel, but
the current merge window did exactly that :(.
-mike
signature.asc
Description: This is a digitally signed message part.
__
Signed-off-by: Mike Frysinger
---
MAINTAINERS |1 +
MAKEALL |1 +
Makefile |6 +-
board/bf518f-ezbrd/.gitignore |1 +
board/bf518f-ezbrd/Makefile | 57 ++
board/bf518f-ezbrd/bf518f-ezb
Signed-off-by: Mike Frysinger
---
drivers/spi/bfin_spi.c | 18 ++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index 0472c1a..bc3394a 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -36,6 +36,
When testing a u-boot binary that hasn't been booted from the bootrom, we
have to make sure the bootstruct structure has sane storage space. If we
don't, the initcode will crash when it tries to dereference an invalid
pointer.
Signed-off-by: Mike Frysinger
---
cpu/blackfin/initcode.c |9 +++
On 06:45 Thu 02 Apr , Mike Frysinger wrote:
> Since the Blackfin timer code requires HZ to be 1000, barf on any board
> that tries to use a different value.
>
> Signed-off-by: Mike Frysinger
> ---
> include/asm-blackfin/blackfin-config-post.h |8 ++--
> 1 files changed, 6 insertions(
On 00:39 Thu 02 Apr , Wolfgang Denk wrote:
> Dear Jean-Christophe PLAGNIOL-VILLARD,
>
> In message <1238431700-7803-2-git-send-email-plagn...@jcrosoft.com> you wrote:
> > unify arm cache management except for non standard cache as ARM7TDMI
> >
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLA
This patch support the soft reset at s3c6410
Signed-off-by: Minkyu Kang
---
cpu/arm1176/cpu.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c
index 1e94f7d..cb13d9c 100644
--- a/cpu/arm1176/cpu.c
+++ b/cpu/arm1176/cpu.c
@@ -112,7
Signed-off-by: Mike Frysinger
---
cpu/blackfin/serial.c |4
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c
index 42534bd..3861955 100644
--- a/cpu/blackfin/serial.c
+++ b/cpu/blackfin/serial.c
@@ -115,10 +115,6 @@ void serial_
The Blackfin SDH controller is still using the legacy framework, so update
the driver to use the renamed functions.
Signed-off-by: Mike Frysinger
---
drivers/mmc/bfin_sdh.c | 14 ++
1 files changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc
Signed-off-by: Mike Frysinger
---
board/bf537-stamp/Makefile |1 +
board/bf537-stamp/bf537-stamp.c | 57 ++---
board/bf537-stamp/ide-cf.c | 66 +++
3 files changed, 70 insertions(+), 54 deletions(-)
create mode 100
Looks like I accidentally added a newline to the OTP help when merging and
older change.
Signed-off-by: Mike Frysinger
---
common/cmd_otp.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/common/cmd_otp.c b/common/cmd_otp.c
index 6523290..4be4344 100644
--- a/common/cmd
Mike Frysinger wrote:
> - /* Up to 2 seconds */
> - ret = stmicro_wait_ready(flash, 2 * CONFIG_SYS_HZ);
> + ret = stmicro_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
50 ms is an awful lot less than 2 seconds. Sure this is safe?
Haavard
On Thursday 02 April 2009 06:57:03 Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 06:45 Thu 02 Apr , Mike Frysinger wrote:
> > Since the Blackfin timer code requires HZ to be 1000, barf on any board
> > that tries to use a different value.
> >
> > Signed-off-by: Mike Frysinger
> > ---
> > inclu
On Thursday 02 April 2009 07:20:13 Haavard Skinnemoen wrote:
> Mike Frysinger wrote:
> > - /* Up to 2 seconds */
> > - ret = stmicro_wait_ready(flash, 2 * CONFIG_SYS_HZ);
> > + ret = stmicro_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
>
> 50 ms is an awful lot les
Dear eija_flight,
In message <22843365.p...@talk.nabble.com> you wrote:
>
> Using U-boot 1.3.1 version, It is possible (as a user) to apply all of
> these test feature into a standalone applications?
> because I need to log the result using standalone app.
U-Boot 1.3.1 is very old and basicly
Dear eija_flight,
In message <22844927.p...@talk.nabble.com> you wrote:
>
> It is possible to use standalone apps to do memory operations?
> If it is possible, then how to do it?
Like any other functions, too. Just read the documentation and follow
the examples given there.
> I've been able to
Dear Mike,
In message <200904020716.34368.vap...@gentoo.org> you wrote:
>
> can we shorten/elongate (doesnt matter to me) the next release process ? the
> original time frame was picked so as to not overlap with the linux kernel,
> but
> the current merge window did exactly that :(.
Yes, I'm
Mike Frysinger wrote:
> On Thursday 02 April 2009 07:20:13 Haavard Skinnemoen wrote:
> > Mike Frysinger wrote:
> > > - /* Up to 2 seconds */
> > > - ret = stmicro_wait_ready(flash, 2 * CONFIG_SYS_HZ);
> > > + ret = stmicro_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
> >
On 07:21 Thu 02 Apr , Mike Frysinger wrote:
> On Thursday 02 April 2009 06:57:03 Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 06:45 Thu 02 Apr , Mike Frysinger wrote:
> > > Since the Blackfin timer code requires HZ to be 1000, barf on any board
> > > that tries to use a different value.
>
On 13:40 Thu 02 Apr , Wolfgang Denk wrote:
> Dear Mike,
>
> In message <200904020716.34368.vap...@gentoo.org> you wrote:
> >
> > can we shorten/elongate (doesnt matter to me) the next release process ?
> > the
> > original time frame was picked so as to not overlap with the linux kernel,
>
On Thursday 02 April 2009 07:28:21 Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 07:21 Thu 02 Apr , Mike Frysinger wrote:
> > On Thursday 02 April 2009 06:57:03 Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > On 06:45 Thu 02 Apr , Mike Frysinger wrote:
> > > > Since the Blackfin timer code req
Since timeouts are only hit when there is a problem in the system, we
don't want to prematurely timeout on a functioning setup. Thus having
low timeouts (in milliseconds) doesn't gain us anything in the production
case, but rather increases likely hood of causing problems where none
otherwise exis
On Thursday 02 April 2009 07:40:09 Wolfgang Denk wrote:
> In message Mike wrote:
> > can we shorten/elongate (doesnt matter to me) the next release process ?
> > the original time frame was picked so as to not overlap with the linux
> > kernel, but the current merge window did exactly that :(.
>
>
Hi Mike,
> not so long ago there was some custom thingy that was running on the u-boot
> website that'd automatically grab patches from the mailing list and try to
> file them away so they wouldnt get lost. but i cant seem to find it any
> more.
> is it gone ?
No, it is not gone, it only st
Hi,
> Dear Scott Wood,
>
> In message <20090331212514.ga19...@ld0162-tx32.am.freescale.net> you wrote:
>> On Tue, Mar 31, 2009 at 05:48:01PM +0200, Wolfgang Denk wrote:
>> > We still need some hint that the timer works in millisecond
>> > resolution, though - no matter what you call it.
>>
>> How
On Thursday 02 April 2009 08:32:00 Detlev Zundel wrote:
> > not so long ago there was some custom thingy that was running on the
> > u-boot website that'd automatically grab patches from the mailing list
> > and try to file them away so they wouldnt get lost. but i cant seem to
> > find it any mor
1 - 100 of 124 matches
Mail list logo
