On Thu, Apr 22, 2010 at 12:40 AM, Wolfgang Denk w...@denx.de wrote:
Looking at the code I wonder why we need post_word_store() and
post_word_load() functions at all. All implementations I have found
translate into a single ioread32() resp. iowrite32() call.
Probably, due to big and little
Dear Michael Zaidman,
In message i2o660c0f821004212341w74ed641aw94cd8738f1b9c...@mail.gmail.com you
wrote:
Looking at the code I wonder why we need post_word_store() and
post_word_load() functions at all. All implementations I have found
translate into a single ioread32() resp.
Hi Ben,
Please read the documentation.
This is not how it's done.
Ok, thanks for the info.
After reading doc/README.enetaddr I think I understand how it's done
right. I already have reworked my patch that way. I'll wait with
re-submitting until things have settled.
Regards,
Andreas.
This patch fixes error when CONFIG_SYS_NO_FLASH. And adds
nand flash and mmc initialization, which should go before
env initialization.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
v3 include mmc.h and nand.h.
v2 arch dir reorganized.
arch/nios2/lib/board.c | 18 ++
1
On Thu, Apr 22, 2010 at 12:03 PM, Wolfgang Denk w...@denx.de wrote:
Looking at the code I wonder why we need post_word_store() and
post_word_load() functions at all. All implementations I have found
translate into a single ioread32() resp. iowrite32() call.
Probably, due to big and
This patchset adds support for MB86R0x SoC familiy from Fujitsu,
its built in lcd controller and a first board using the
MB86R01.
Matthias Weisser (3):
arm: Add support for MB86R0x SoCs
video: add support for display controller in MB86R0x SoCs
arm: Add support for jadecpu board based on
This patch adds support for MB86R0x SoCs from Fujitsu
Signed-off-by: Matthias Weisser weiss...@arcor.de
---
arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 47 +++
arch/arm/cpu/arm926ejs/mb86r0x/reset.c | 37 ++
arch/arm/cpu/arm926ejs/mb86r0x/timer.c | 129
This patch adds support for the display controller in
the MB86R0x SoCs.
Signed-off-by: Matthias Weisser weiss...@arcor.de
---
drivers/video/Makefile |1 +
drivers/video/cfb_console.c |8 ++
drivers/video/mb86r0xgdc.c | 194 +++
3 files
This patch adds support for the jadecpu board using the
MB86R01 'Jade' SoC from Fujitsu.
Signed-off-by: Matthias Weisser weiss...@arcor.de
---
MAINTAINERS |4 +
MAKEALL |1 +
Makefile |3 +
Hi all,
I tried to compile the u-boot-2009.11 and u-boot-2010.03 for TI Davinci
DM355 EVM (davinci_dm355evm_config) board but it ended up with the
following error. could some one please help me in finding where exaclty
the problem is. the log is as below for u-boot-2009.11
--
Best Regards,
Dear Heiko Schocher,
sorry for the late review.
In message 4bc2ccba.9090...@denx.de you wrote:
- This patch reworks all headerfiles for keymile boards (coge, supx4,
eter1, suen3).
Furthermore, a refactoring on the whole environment variables has been
acomplished.
- introduces the
Dear Heiko Schocher,
In message 4bc2ccbe.6060...@denx.de you wrote:
- serial console on UART1
- Ethernet RMII over UCC4
- PHY SMSC LAN8700
- 64MB Flash
- 128 MB DDR2 RAM
- I2C
- bootcount
This board is similiar to the kmeter1 (8360) board,
so common config options are extracted into
Dear Kim,
In message 20100415172711.a7cd388a.kim.phill...@freescale.com you wrote:
since 3 of these 4 patches are in the mpc83xx domain, I went ahead and
applied 1-4/4 and pushed to u-boot-mpc83xx.git.
Sorry for being slow with the review. I'm afraid I have to ask you to
undo this.
Best
Dear Mohamed Thalib H,
In message 4bd028a9.2020...@e-consystems.com you wrote:
I tried to compile the u-boot-2009.11 and u-boot-2010.03 for TI Davinci
DM355 EVM (davinci_dm355evm_config) board but it ended up with the
following error. could some one please help me in finding where exaclty
Hi Thomas,
Thomas Chou wrote:
The example configuration files of nios2-generic board can generated
binary to run on the EP1C20, EP1S10, and EP1S40 boards. So the three
boards can be removed.
With nios2-generic approach, the fpga parameter header file can
be generated from hardware designs
Dear Matthias Weisser,
In message 1271932257-14618-3-git-send-email-weiss...@arcor.de you wrote:
This patch adds support for the display controller in
the MB86R0x SoCs.
Signed-off-by: Matthias Weisser weiss...@arcor.de
...
+ pGD-memSize = VIDEO_MEM_SIZE;
+ pGD-frameAdrs =
Dear Matthias Weisser,
In message 1271932257-14618-4-git-send-email-weiss...@arcor.de you wrote:
This patch adds support for the jadecpu board using the
MB86R01 'Jade' SoC from Fujitsu.
Signed-off-by: Matthias Weisser weiss...@arcor.de
---
MAINTAINERS |4 +
Am 22.04.2010 14:41, schrieb Wolfgang Denk:
Dear Matthias Weisser,
In message1271932257-14618-3-git-send-email-weiss...@arcor.de you wrote:
This patch adds support for the display controller in
the MB86R0x SoCs.
Signed-off-by: Matthias Weisserweiss...@arcor.de
...
+pGD-memSize =
Am 22.04.2010 14:51, schrieb Wolfgang Denk:
+if ((in_word 0xC0) == 0xC0) {
+setenv(stdin, serial);
+setenv(stdout, serial);
+setenv(stderr, serial);
+setenv(bootdelay, 10);
+} else if ((in_word 0xC0) != 0) {
+
Dear =?ISO-8859-1?Q?Matthias_Wei=DFer?=,
In message 4bd04c64.20...@arcor.de you wrote:
Am 22.04.2010 14:51, schrieb Wolfgang Denk:
+ if ((in_word 0xC0) == 0xC0) {
+ setenv(stdin, serial);
+ setenv(stdout, serial);
+ setenv(stderr, serial);
+
Vipin KUMAR wrote:
On 4/21/2010 10:32 PM, Scott Wood wrote:
On Wed, Apr 21, 2010 at 01:24:37PM +0530, Vipin KUMAR wrote:
diff --git a/board/spear/spear310/spear310.c
b/board/spear/spear310/spear310.c
index 1207709..3ac62d1 100644
--- a/board/spear/spear310/spear310.c
+++
Vipin KUMAR wrote:
On 4/21/2010 10:32 PM, Scott Wood wrote:
On Wed, Apr 21, 2010 at 01:24:36PM +0530, Vipin KUMAR wrote:
+#if defined(CONFIG_BOARD_NAND_LP)
CONFIG_SYS_FSMC_NAND_LP, CONFIG_SYS_FSMC_NAND_16BIT, etc.
Incomplete comment :)
Are these deprecated
CONFIG symbols that are hardware
On Thu, 22 Apr 2010 13:21:18 +0200
Wolfgang Denk w...@denx.de wrote:
Dear Kim,
In message 20100415172711.a7cd388a.kim.phill...@freescale.com you wrote:
since 3 of these 4 patches are in the mpc83xx domain, I went ahead and
applied 1-4/4 and pushed to u-boot-mpc83xx.git.
Sorry for
21.04.2010 23:52, Mike Frysinger wrote:
Wrong alignment in smc911x driver when reading a frame from fifo.
Neither smc911x chip nor U-Boot doesn't use IP-alignment, so we don't
need to add anything here.
I know you use this driver a lot. Please comment on this patch.
i really havent a clue
On Thursday 22 April 2010 15:12:19 Valentin Yakovenkov wrote:
21.04.2010 23:52, Mike Frysinger wrote:
Wrong alignment in smc911x driver when reading a frame from fifo.
Neither smc911x chip nor U-Boot doesn't use IP-alignment, so we don't
need to add anything here.
I know you use this
22.04.2010 23:43, Mike Frysinger wrote:
i would send the patch again with this info in the changelog. however, at
least on my board, i see no speed difference with this patch. i get about
2.8MiB/s on my bf548-ezkit with and without your change. so, it doesnt break
anything that i can see,
Hi
On 04/19/2010 11:04 PM, Stefano Babic wrote:
The RTC is part of the Freescale's PMIC controller.
Use general function to access to PMIC internal registers.
Signed-off-by: Stefano Babic sba...@denx.de
---
Changes since last version: configuration of the RTC must be
updated for the
Valentin,
On Thu, Apr 22, 2010 at 12:53 PM, Valentin Yakovenkov
yakoven...@niistt.ruwrote:
22.04.2010 23:43, Mike Frysinger wrote:
i would send the patch again with this info in the changelog. however, at
least on my board, i see no speed difference with this patch. i get about
2.8MiB/s
On Thu, 15 Apr 2010 17:36:02 -0500
Kim Phillips kim.phill...@freescale.com wrote:
marketing didn't extend their postpend-with-an-A naming strategy
on rev.2's and higher beyond the first two 83xx families. This
patch stops us from misreporting we're running e.g., on an MPC8313EA,
when such a
Applied. Thanks.
--Scott
Thomas Chou wrote:
This patch allow boards to override the default link script.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
arch/nios2/config.mk |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/nios2/config.mk
Applied. Thanks.
--Scott
Thomas Chou wrote:
This patch toggles power to reset the cf card.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
more checkpatch.pl fixes
board/altera/common/cfide.c | 33 +
1 files changed, 33 insertions(+), 0
Applied. Thanks.
--Scott
Thomas Chou wrote:
This function return cache-line aligned allocation which is mapped
to uncached io region.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
arch dir reorganized.
arch/nios2/include/asm/dma-mapping.h | 23 +++
1 files
Wolfgang Denk wrote:
Um... Scott, I have a few other NIOS2 related patches in my queue
that seem to be pending, could you please have a look at these?
03/25 Thomas Chou [PATCH v2] nios2: add dma_alloc_coherent with
asm-nios2/dma-mapping.h
Applied resubmission:
04/16 Thomas Chou [PATCH
Hi Henry U-Boot Community,
I've been experiencing the same errors and frustration you have.
So I've been looking at this code and these patch sets for a day or
two now. I've done that in conjunction with reading the SD card spec:
http://www.sdcard.org/developers/tech/sdcard/pls/
I've come to
Greetings,
I was wondering if there is anyone working on porting the mmc.c
library to the Atmel AT91 (or AVR32) platforms?
As it stands now the atmel_mci.c has its own initialization and
structures. It is largely legacy code and there is no support for the
SD Physical Layer Specification
Applied. Thanks.
--Scott
Thomas Chou wrote:
This patch adds an option to bypass output waiting when there
is no jtag connection. This allows the jtag uart work similar
to a serial uart, ie, boot even without connection.
This option is enabled with,
Signed-off-by: Thomas Chou
Hello folks,
Does the latest u-boot include support for these flash families:
- Spansion S29GL-P MirrorBit flash family or
- Numonyx Axcell M29EW
Appreciate your help.
thanks,
aditya
___
U-Boot mailing list
U-Boot@lists.denx.de
Applied. Thanks.
--Scott
Thomas Chou wrote:
Global interrupt should be disabled from the beginning.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
arch/nios2/cpu/start.S |9 -
1 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/nios2/cpu/start.S
Applied. Thanks.
--Scott
Thomas Chou wrote:
This patch fixes error when CONFIG_SYS_NO_FLASH. And adds
nand flash and mmc initialization, which should go before
env initialization.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
v3 include mmc.h and nand.h.
v2 arch dir reorganized.
This patch supports mmc/sd card with spi interface.
I have tested with sd and mmc cards. But there is still ocr issue
with SDHC.
Signed-off-by: Thomas Chou tho...@wytron.com.tw
---
drivers/mmc/Makefile |1 +
drivers/mmc/mmc_spi.c | 252 +
2
On Thursday 22 April 2010 01:16:34 Thomas Chou wrote:
- slave = spi_setup_slave(0, CONFIG_SPI_MMC_DEFAULT_CS,
+ slave = spi_setup_slave(
+ CONFIG_SPI_MMC_DEFAULT_BUS, CONFIG_SPI_MMC_DEFAULT_CS,
CONFIG_SPI_MMC_DEFAULT_SPEED, CONFIG_SPI_MMC_DEFAULT_MODE);
seems
From: Hans Eklund h...@rubico.se
Needs converting to generic MMC framework.
Signed-off-by: Hans Eklund h...@rubico.se
Signed-off-by: Cliff Cai cliff@analog.com
Signed-off-by: Mike Frysinger vap...@gentoo.org
---
drivers/mmc/Makefile |3 +
drivers/mmc/spi_mmc.c | 1119
On Thursday 22 April 2010 22:53:34 Thomas Chou wrote:
This patch supports mmc/sd card with spi interface.
I have tested with sd and mmc cards. But there is still ocr issue
with SDHC.
now the semi-obvious question ... how does this differ from the old spi_mmc.c
driver ? i see this doesnt rely
Hi Scott,
On 04/22/2010 08:36 PM, Scott McNutt wrote:
With nios2-generic approach, the fpga parameter header file can
be generated from hardware designs using tools. Porting u-boot for
What tools are you referring to?
There are two tools.
1. sopc-create-header-files
It is included in
Hi Wolfgang,
I’m working for Andestech, which is a RISC IP (NDS32) company in Taiwan.
This company has been started for 5 years.
In recent , we are planning to release source code such as Linux Kernel and GNU
toolchain back to communities.
We also plan to commit code to u-boot.
I’ve
On 04/23/2010 11:35 AM, Mike Frysinger wrote:
On Thursday 22 April 2010 22:53:34 Thomas Chou wrote:
This patch supports mmc/sd card with spi interface.
I have tested with sd and mmc cards. But there is still ocr issue
with SDHC.
now the semi-obvious question ... how does this
Hi Thomas,
Thomas Chou wrote:
With nios2-generic approach, the fpga parameter header file can
be generated from hardware designs using tools. Porting u-boot for
What tools are you referring to?
2. sopc-create-config-files
The script is available at
On 04/23/2010 12:21 PM, Scott McNutt wrote:
I tested on the 1c20 this evening as well ... works fine. I will test on
the 2c35 board tomorrow. I'd like to get a positive confirmation WRT the
1S10 and 1S40 before applying this patch.
Great! Please also check epcs/spi flash on EP1C20.
1. apply
Hi Aditya,
On Friday 23 April 2010 03:35:59 Aditya Ojha (adojha) wrote:
Does the latest u-boot include support for these flash families:
- Spansion S29GL-P MirrorBit flash family or
- Numonyx Axcell M29EW
The common CFI driver (drivers/mtd/cfi_flash.c) should be able to support all
CFI
Hi All,
we are porting U-boot 1.2.0 to MIPS32 Au1350 Processor. i am using ELDK
4.1 for MIPS32.
Thanks wolfgang now am able to compile toolchain for mips after using ELDK for
MIPS.
Now while porting U-boot to Au1350 MIPS32 we are facing following problems
mentioned below.
We have
SMSC911x chips have alignment function to allow frame payload data
(which comes after 14-bytes ethernet header) to be aligned at some
boundary when reading it from fifo (usually - 4 bytes boundary).
This is done by inserting fake zeros bytes BEFORE actual frame data when
reading from SMSC's fifo.
On 04/23/2010 12:04 PM, Thomas Chou wrote:
it's too bad the new framework doesnt allow for dynamic probing like
the spi
layer. makes it a pain to work with a SPI/MMC card that can have the CS
changed on the fly.
-mike
Second thought.
With generic mmc framework, we can instance
52 matches
Mail list logo