Per the latest errata updated, B4860/B4420 Rev 1.0 has also
errata A-005871, so adding define A-005871 for B4 SoCs.
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
---
arch/powerpc/include/asm/config_mpc85xx.h |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git
From: Jesse Gilles jgil...@multitech.com
Fix pin setting in MII mode
Signed-off-by: Jesse Gilles jgil...@multitech.com
---
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git
At present get_timer() does not return sane values. It should count up
smoothly in milliscond intervals.
We can change the PWM to count down at 1MHz, providing a resolution
of 1us and a range of about an hour between required get_timer() calls.
Test with command sf probe 1:0; time sf read
This patch set tries to fix few bugs in timer and re-organises PWM
clock code.
Changes since v1:
- Patch-1: Added Acked-by: Simon Glass.
- Patch-2: Added Acked-by: Simon Glass.
- Patch-3: Added Acked-by: Simon Glass.
- Patch-4: Added Acked-by: Simon Glass.
timer_get_us returns the time in microseconds since a certain reference
point of history. However, it does not guarantee to return an accurate
time after a long period; instead, it wraps around (that is, the
reference point is reset to some other point of history) after some
periods. The
First, the div value was being used incorrectly to compute the frequency of
the PWM timer. The value passed in is a constant which reflects the value
that would be found in a configuration register, 0 to 4. That should
correspond to a scaling factor of 1, 2, 4, 8, or 16, 1 div, but div + 1 was
The pwm_config function in the exynos pwm driver divides by its period
period parameter. A function was calling pwm_config with a 0ns period and a
0ns duty cycle. That doesn't actually make any sense physically, and results
in a divide by zero in the driver. This change changes the paremters to be
Add peripherial id for pwm inorder to support
generic api to get the clk frequency
Test with command sf probe 1:0; time sf read 40008000 0 1000.
Try with different numbers of bytes and see that sane values are obtained
Build and boot U-boot with this patch, backlight works properly.
Some small fixes in the exynos pwm driver:
1. NS_IN_HZ is non-sensical since these are not compatible units. This
constant actually describes the number of nanoseconds in a second. Renamed it
to NS_IN_SEC. Also dropped the unnecessary parenthesis.
2. The variable period is not used to hold a
Add generic api to get the frequency of the required peripherial. This
API gets the source clock frequency and returns the required frequency
by dividing with first and second dividers based on the requirement.
Test with command sf probe 1:0; time sf read 40008000 0 1000.
Try with different
MPLL is selected as the source clk of pwm by default
Test with command sf probe 1:0; time sf read 40008000 0 1000.
Try with different numbers of bytes and see that sane values are obtained
Build and boot U-boot with this patch, backlight works properly.
Signed-off-by: Padmavathi Venna
Use generic api to get the pwm clock frequency
Test with command sf probe 1:0; time sf read 40008000 0 1000.
Try with different numbers of bytes and see that sane values are obtained
Build and boot U-boot with this patch, backlight works properly.
Signed-off-by: Padmavathi Venna
This patch set adds hardware acceleration for SHA 256
with the help of ACE.
Changes since v1:
- Patch-1: Fixed few nits.
- Patch-2: Removed not required config.
- Patch-3: Added sha256 to hash command instead of new sha256 command.
Akshay Saraswat (3):
Exynos: Add
This enables SHA 256 for exynos.
Tested with command hash sha256 0x40008000 0x2B 0x40009000.
Used mm and md to write a standard string to memory location
0x40008000 and ran the above command to verify the output.
Signed-off-by: ARUN MANKUZHI aru...@samsung.com
Signed-off-by: Akshay Saraswat
SHA-256 and SHA-1 accelerated using ACE hardware.
Tested with command hash sha256 0x40008000 0x2B 0x40009000.
Used mm and md to write a standard string to memory location
0x40008000 and ran the above command to verify the output.
Signed-off-by: ARUN MANKUZHI aru...@samsung.com
Signed-off-by:
sha256 support is added to hash command which can be used
to test SHA 256 hash algorithm.
Tested with command hash sha256 0x40008000 0x2B 0x40009000.
Used mm and md to write a standard string to memory location
0x40008000 and ran the above command to verify the output.
Signed-off-by: ARUN
Hi Simon,
On Mon, Feb 25, 2013 at 4:40 AM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Sun, Feb 24, 2013 at 10:58 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Sun, Feb 24, 2013 at 11:55 PM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Simon,
On Sun, Feb 24, 2013
Hi,
I confirm that your patch correct my problem and the bug disappear.
The question is : why (or when) the size equals zero ?
Thank you Damien.
2013/2/28 Damien HUANG 黄卫 damien...@hotmail.com
Hi,
You received this email, because you had recently experienced fatwrite
issue with
Hi Akshay,
On Thu, Feb 28, 2013 at 3:00 AM, Akshay Saraswat aksha...@samsung.com wrote:
sha256 support is added to hash command which can be used
to test SHA 256 hash algorithm.
Tested with command hash sha256 0x40008000 0x2B 0x40009000.
Used mm and md to write a standard string to memory
This patch set adds initial dts and configuration file for snow.
Changes in V2:
- Added Maintainer.
Changes in V3:
- Added Maintainer in aphabetical order.
Changes in V4:
- Removed ethernet support
Rajeshwari Shinde (2):
EXYNOS5: Add initial DTS file for Snow.
This patch adds the DTS file for Snow Board.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- None
Changes in V3:
- None
Changes in V4:
- Removed ethernet support
board/samsung/dts/exynos5250-snow.dts | 58 +
This patch adds the configuration file for Snow Board and
defines the same in boards.cfg.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
---
Changes in V2:
- Added Maintainer
Changes in V3:
- Added Maintainer in aphabetical order.
Changes in V4:
- None
Hi Tom,
On Thursday, February 28, 2013 12:47:46 AM, Benoît Thébaudeau wrote:
Hi Tom,
On Thursday, February 28, 2013 12:44:28 AM, Tom Rini wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/27/2013 05:18 PM, Benoît Thébaudeau wrote:
Hi Marek,
On Monday, February 25,
On Sun, 3 Feb 2013 12:19:26 +0100, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hi Vipin,
On Fri, 2 Nov 2012 23:09:59 +0530, Vipin Kumar vipin.ku...@st.com
wrote:
From: Shiraz Hashim shiraz.has...@st.com
It is observed on SPEAr320S RMII#1 interface that on transmitting
packets
On Thu, Feb 28, 2013 at 2:59 AM, Akshay Saraswat aksha...@samsung.com wrote:
Add generic api to get the frequency of the required peripherial. This
API gets the source clock frequency and returns the required frequency
by dividing with first and second dividers based on the requirement.
Test
Hi Akshay,
On Thu, Feb 28, 2013 at 2:59 AM, Akshay Saraswat aksha...@samsung.com wrote:
Use generic api to get the pwm clock frequency
Test with command sf probe 1:0; time sf read 40008000 0 1000.
Try with different numbers of bytes and see that sane values are obtained
Build and boot U-boot
On Thu, Feb 28, 2013 at 3:40 AM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
This patch adds the DTS file for Snow Board.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
---
Changes in V2:
- None
Changes in V3:
-
On Thu, Feb 28, 2013 at 2:54 AM, Akshay Saraswat aksha...@samsung.comwrote:
Hi simon,
Hi Akshay,
On Wed, Feb 27, 2013 at 2:02 AM, Akshay Saraswat aksha...@samsung.com
wrote:
Add peripherial id for pwm inorder to support
generic api to get the clk frequency
TEST=sf probe 1:0;
Hi Akshay,
On Thu, Feb 28, 2013 at 3:00 AM, Akshay Saraswat aksha...@samsung.com wrote:
SHA-256 and SHA-1 accelerated using ACE hardware.
Tested with command hash sha256 0x40008000 0x2B 0x40009000.
Used mm and md to write a standard string to memory location
0x40008000 and ran the above
it would seem that in addition to manually setting HOSTCC, a user
should also set HOSTSTRIP when building fw_printenv, no? there's no
mention of that in the README but the strip operation will certainly
fail without it.
rday
___
U-Boot mailing list
Hi Akshay,
On Thu, Feb 28, 2013 at 3:00 AM, Akshay Saraswat aksha...@samsung.com wrote:
This enables SHA 256 for exynos.
Tested with command hash sha256 0x40008000 0x2B 0x40009000.
Used mm and md to write a standard string to memory location
0x40008000 and ran the above command to verify the
On Thu, Feb 28, 2013 at 3:40 AM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
This patch adds the configuration file for Snow Board and
defines the same in boards.cfg.
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
---
Changes in V2:
Hi Wolfgang,
On Thu, 29 Nov 2012 13:53:28 +0100, Wolfgang Denk w...@denx.de wrote:
Now that the patches have made it into mainline, we can also add the
commit IDs.
Signed-off-by: Wolfgang Denk w...@denx.de
---
doc/README.scrapyard | 14 +++---
1 file changed, 7 insertions(+), 7
Hi Jagan,
On Thu, Feb 28, 2013 at 3:14 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Mon, Feb 25, 2013 at 4:40 AM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Sun, Feb 24, 2013 at 10:58 AM, Jagan Teki jagannadh.t...@gmail.com
wrote:
Hi Simon,
On Sun, Feb 24, 2013 at
On Wed, Feb 27, 2013 at 11:18:48PM +0100, Beno??t Th??baudeau wrote:
Hi Marek,
On Monday, February 25, 2013 7:19:54 PM, Marek Vasut wrote:
Implement u-boot.nand target that can be reused with a small amount of
churn across all CPU models. The idea is to delegate the u-boot.nand target
Hi Joe,
On Wed, Feb 27, 2013 at 1:08 AM, Joe Hershberger
joe.hershber...@gmail.com wrote:
Hi Simon,
On Mon, Feb 25, 2013 at 12:10 AM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Sun, Feb 24, 2013 at 11:50 AM, Joe Hershberger
joe.hershber...@gmail.com wrote:
Hi Simon,
On Sun, Feb 24,
+Ilko Iliev il...@ronetix.at again
Hi Joe,
On Wed, Feb 27, 2013 at 12:40 AM, Joe Hershberger
joe.hershber...@gmail.com wrote:
Hi Simon,
On Mon, Feb 25, 2013 at 11:28 PM, Simon Glass s...@chromium.org wrote:
Hi Joe,
On Sun, Feb 24, 2013 at 11:53 AM, Joe Hershberger
(sorry for any duplicate of this mail)
Hi R Sricharan,
On Tue, 8 Jan 2013 23:38:22 +0530, R Sricharan r.sricha...@ti.com
wrote:
Currently for ARM based cpu's, mmu pagetable attributes are set with
manager permissions for all 4GB address space. Because of this the
'execute never (XN)'
Hi Hector,
Hector Palacios wrote:
Apparently the problem was due to my platform suffering a hardware
specific VDDD brownout during the initialization.
Just in case it helps anybody, the reason why I was not able to see
anything on the DUART port during SPL initialization, despite having
On Mon, Feb 18, 2013 at 9:58 PM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
This revomes the code under #if 0 in the s3c24x0_i2c driver.
Signed-off-by: Alim Akhtar alim.akh...@samsung.com
Signed-off-by: Rajeshwari Shinde rajeshwar...@samsung.com
Acked-by: Simon Glass s...@chromium.org
This patch provides a support to build the user specified dts.
If the user is not specifying any dts, then it should build the
dts from CONFIG_DEFAULT_DEVICE_TREE.
$ make - choose the default dts, defined as CONFIG_DEFAULT_DEVICE_TREE
$ make DEVICE_TREE=dts-file-name - choose the specified dts
Hi Jagannadha,
On Thu, Feb 28, 2013 at 6:33 AM, Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-t...@xilinx.com wrote:
This patch provides a support to build the user specified dts.
If the user is not specifying any dts, then it should build the
dts from CONFIG_DEFAULT_DEVICE_TREE.
$
Am Mittwoch, den 27.02.2013, 14:03 -0700 schrieb Stephen Warren:
On 02/26/2013 04:00 PM, Stephen Warren wrote:
This is useful on all Tegras, so that boot.scr on all devices can use
the same commands. Hence, move it to tegra-common.h.
Unfortunately, this breaks Tegra114 builds because no
Hi Simon,
-Original Message-
From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
Sent: 28 February 2013 20:08
To: Jagannadha Sutradharudu Teki
Cc: u-boot@lists.denx.de; Jerry Van Baren; mon...@monstr.eu; Jagannadha
Sutradharudu Teki; Vadim Bendebury
Subject: Re:
From: Fadil Berisha f.kol...@gmail.com
Local macros apply to both iMX23 and iMX28. This patch renames local
macros with attribute MX28 to MXS.
Signed-off-by: Fadil Berisha f.kol...@gmail.com
Cc: Marek Vasut ma...@denx.de
Cc: Otavio Salvador ota...@ossystems.com.br
Cc: Fabio Estevam
On Thu, Feb 28, 2013 at 12:03 PM, Fadil Berisha f.kol...@gmail.com wrote:
From: Fadil Berisha f.kol...@gmail.com
Local macros apply to both iMX23 and iMX28. This patch renames local
macros with attribute MX28 to MXS.
Signed-off-by: Fadil Berisha f.kol...@gmail.com
Acked-by: Otavio Salvador
On Thu, 28 Feb 2013 15:20:44 +0100, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
(sorry for any duplicate of this mail)
Hi R Sricharan,
On Tue, 8 Jan 2013 23:38:22 +0530, R Sricharan r.sricha...@ti.com
wrote:
Currently for ARM based cpu's, mmu pagetable attributes are set with
Hi Tom,
On Thursday, February 28, 2013 3:03:09 PM, Tom Rini write:
On Wed, Feb 27, 2013 at 11:18:48PM +0100, Beno??t Th??baudeau wrote:
Hi Marek,
On Monday, February 25, 2013 7:19:54 PM, Marek Vasut wrote:
Implement u-boot.nand target that can be reused with a small amount of
churn
Hi Tom,
On Thursday, February 28, 2013 4:24:22 PM, Benoît Thébaudeau wrote:
Hi Tom,
On Thursday, February 28, 2013 3:03:09 PM, Tom Rini write:
On Wed, Feb 27, 2013 at 11:18:48PM +0100, Beno??t Th??baudeau wrote:
Hi Marek,
On Monday, February 25, 2013 7:19:54 PM, Marek Vasut wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/28/2013 11:06 AM, Benoît Thébaudeau wrote:
Hi Tom,
On Thursday, February 28, 2013 4:24:22 PM, Benoît Thébaudeau
wrote:
Hi Tom,
On Thursday, February 28, 2013 3:03:09 PM, Tom Rini write:
On Wed, Feb 27, 2013 at 11:18:48PM +0100,
On Thu, Feb 28, 2013 at 12:00 AM, Fadil Berisha f.kol...@gmail.com wrote:
From: Fadil Berisha f.kol...@gmail.com
This patch add timer support to i.MX23 and complete bit fields and values
on regs-timrot.h.
Testet on imx23-olinuxino board.
Signed-off-by: Fadil Berisha f.kol...@gmail.com
This was an older debug/developmental file that got added
accidentally. Not needed/used in any Cardhu build.
Signed-off-by: Tom Warren twar...@nvidia.com
---
This errant file exists in u-boot-tegra/next, u-boot-arm/master, and
u-boot/master (TOT). I'll remove it from u-boot-tegra/next, so it'll
On Thursday, February 28, 2013 5:21:55 PM, Tom Rini wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/28/2013 11:06 AM, Benoît Thébaudeau wrote:
Hi Tom,
On Thursday, February 28, 2013 4:24:22 PM, Benoît Thébaudeau
wrote:
Hi Tom,
On Thursday, February 28, 2013 3:03:09
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/28/2013 11:29 AM, Benoît Thébaudeau wrote:
On Thursday, February 28, 2013 5:21:55 PM, Tom Rini wrote:
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1
On 02/28/2013 11:06 AM, Benoît Thébaudeau wrote:
Hi Tom,
On Thursday, February 28, 2013
On 02/26/2013 03:28 PM, Stephen Warren wrote:
From: Stephen Warren swar...@nvidia.com
Various errata exist in the Cortex-A9 CPU, and may be worked around by
setting some bits in a CP15 diagnostic register. Add code to implement
the workarounds, enabled by new CONFIG_ options.
This code
On 02/28/2013 09:30 AM, Tom Warren wrote:
This was an older debug/developmental file that got added
accidentally. Not needed/used in any Cardhu build.
Reviewed-by: Stephen Warren swar...@nvidia.com
___
U-Boot mailing list
U-Boot@lists.denx.de
Dear Tom Rini,
On Tue, Feb 26, 2013 at 12:33:52PM +0100, Beno??t Th??baudeau wrote:
On Tuesday, February 26, 2013 8:19:42 AM, Marek Vasut wrote:
Dear Beno??t Th??baudeau,
Dear Scott Wood,
On Tuesday, February 26, 2013 12:07:25 AM, Scott Wood wrote:
On 02/25/2013
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/28/2013 01:50 PM, Marek Vasut wrote:
Dear Tom Rini,
On Tue, Feb 26, 2013 at 12:33:52PM +0100, Beno??t Th??baudeau
wrote:
On Tuesday, February 26, 2013 8:19:42 AM, Marek Vasut wrote:
Dear Beno??t Th??baudeau,
Dear Scott Wood,
On
Dear Fabio Estevam,
From: Fabio Estevam fabio.este...@freescale.com
Currently the following kernel hang happens when loading a 2.6.35 kernel
from Freeescale on a mx28evk board:
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bus freq
Dear Fadil Berisha,
From: Fadil Berisha f.kol...@gmail.com
Local macros apply to both iMX23 and iMX28. This patch renames local
macros with attribute MX28 to MXS.
Signed-off-by: Fadil Berisha f.kol...@gmail.com
Cc: Marek Vasut ma...@denx.de
Cc: Otavio Salvador ota...@ossystems.com.br
This series adds DFU support to NAND and was started by Pantelis. The
NAND changes have been compile-tested on all ARM and PowerPC targets and
run-time tested on ARM. DFU itself has been tested, for NAND, on
am335x_evm.
For practical reasons, this series depends on Pantelis' previous series
of
We make these two functions take a size_t pointer to how much space
was used on NAND to read or write the buffer (when reads/writes happen)
so that bad blocks can be accounted for. We also make them take an
loff_t limit on how much data can be read or written. This means that
we can now catch
Signed-off-by: Tom Rini tr...@ti.com
---
Changes in v3: None
Changes in v2:
- Add CONFIG_CMD_MTDPARTS and relevant information to am335x_evm
include/configs/am335x_evm.h |9 +
1 file changed, 9 insertions(+)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
From: Pantelis Antoniou pa...@antoniou-consulting.com
Support for NAND storage devices to work with the DFU framework.
Signed-off-by: Pantelis Antoniou pa...@antoniou-consulting.com
Signed-off-by: Tom Rini tr...@ti.com
---
Changes in v3:
- Rework logic in nand_block_op for
From: Pantelis Antoniou pa...@antoniou-consulting.com
- Add CONFIG_DFU_NAND, CONFIG_DFU_MMC
- Set dfu_alt_info_nand and dfu_alt_info_mmc to show a working example
for both.
- Increase CONFIG_SYS_MAXARGS due to hush parsing bugs that would
otherwise disallow 'setenv dfu_alt_info
Hi Stefan,
On Fri, Feb 22, 2013 at 9:02 PM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Stefan,
On Thu, Feb 21, 2013 at 5:27 PM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Stefan,
On Wed, Feb 20, 2013 at 11:44 PM, Stefan Roese s...@denx.de wrote:
Hi Jagan,
On 20.02.2013 18:25, Jagan
TPM command library implements a subset of TPM commands defined in TCG
Main Specification 1.2 that are useful for implementing secure boot.
More TPM commands could be added out of necessity.
You may exercise these commands through the 'tpm' command. However, the
raw TPM commands are too
On 02/26/2013 01:19 PM, Hector Palacios wrote:
Greetings,
I'm porting a custom platform based on mx28evk to latest U-Boot.
I modified the iomux.c for my platform (different DUART pins) and made some
changes to
mxs_adjust_memory_params() to accommodate to my DRAM chip.
I built the u-boot.sb.
SPL hangs on a beagleboard during the serial initialization (line 40 of
drivers/serial/ns16550.c). The reason is the non-empty shift register of TX
(transmit FIFO is empty). To avoid the hangup include/configs/omap3_beagle.h
has to be changed like in include/configs/igep00x0.h:
diff --git
Hi,
While digging through the code, some question arises.
So let me drop some notes about the patch:
( I apologize for some weird word wraps in the quoted text, but I have
to use
a well known UMA which seems to be too stupid to keep lines of text
without additional
word wraps...)
Hi everyone,
This issue is more imx28 / ltib related, but here it goes:
If I build the u-boot from the ltib package and want to flash an SD-card
with the boot stream, I have the choice between imx28_uboot.sb and
imx28_ivt_uboot.sd (a HAB secured one). For the mx28evk, it only works
if I use the
Hi Reinhard,
Replied below.
On Thu, Feb 28, 2013 at 6:50 AM, Pfau, Reinhard p...@gdsys.de wrote:
Hi,
While digging through the code, some question arises.
So let me drop some notes about the patch:
( I apologize for some weird word wraps in the quoted text, but I have
to use
a well
On Thu, 28 Feb 2013 06:00:21 -0500
Akshay Saraswat aksha...@samsung.com wrote:
---
Changes since v1:
- Moved code to drivers/crypto.
- Fixed few other nits.
be more specific wrt changes between revisions.
+ if (buf_len == 0) {
+ /* ACE H/W cannot compute hash
On Thu, 28 Feb 2013 11:08:21 +
Akshay Saraswat aksha...@samsung.com wrote:
On Wed, 27 Feb 2013 10:24:39 -0500
Akshay Saraswat aksha...@samsung.com wrote:
can you fix your mailer to not double space lines?
+/* Maximum input data size is 8 MB. Timeout observed for data size above
8MB
On Sat, Feb 23, 2013 at 11:45:45AM +, Mark Jackson wrote:
All the current TI AM335x boards currently appear to start with an MPU clock
of 550MHx and a core clock of 1GHz,
based on #defines in include/asm/arch-am33xx/clocks_am33xx.h
I assume most people then pass control over to (eg)
This patch provides a support to build the user specified dts.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
Changes for v2:
- Update the logic for not giving an error if DEVICE_TREE defined
- Documented the build steps
doc/README.fdt-control |8
On Tue, Feb 26, 2013 at 03:44:22PM -0600, Scott Wood wrote:
The following changes since commit 47104c37de076e2be35ae1b3d144614f4d24a766:
MAKEALL: add support for per architecture toolchains (2013-02-20 09:40:34
-0500)
are available in the git repository at:
Hi Eric,
On Sat, Feb 23, 2013 at 1:31 PM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
It's probably going to be a week or so before I can re-work the
HDMI detection code per Wolfgang's request and re-submit Nitrogen6X.
I work on a patch that will add an hdmi structure, so that we can
Hi Simon,
On Thu, Feb 28, 2013 at 7:22 PM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Thu, Feb 28, 2013 at 3:14 AM, Jagan Teki jagannadh.t...@gmail.com wrote:
Hi Simon,
On Mon, Feb 25, 2013 at 4:40 AM, Simon Glass s...@chromium.org wrote:
Hi Jagan,
On Sun, Feb 24, 2013 at 10:58
On Thu, Feb 28, 2013 at 12:20 PM, Jagannadha Sutradharudu Teki
jagannadha.sutradharudu-t...@xilinx.com wrote:
This patch provides a support to build the user specified dts.
Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
Acked-by: Simon Glass s...@chromium.org
Thank you.
---
On 02/28/2013 01:26 PM, Fabio Estevam wrote:
Hi Eric,
On Sat, Feb 23, 2013 at 1:31 PM, Eric Nelson
eric.nel...@boundarydevices.com wrote:
It's probably going to be a week or so before I can re-work the
HDMI detection code per Wolfgang's request and re-submit Nitrogen6X.
I work on a patch
On Thu, Feb 21, 2013 at 07:06:38PM +0800, Sonic Zhang wrote:
From: Sonic Zhang sonic.zh...@analog.com
ADSP-BF60x is the new generation Blackfin?? dual-core processor announced by
Analog Devices in late March, 2012. This patch set adds BF60x processor
support
to Das U-Boot Blackfin
From: Fabio Estevam fabio.este...@freescale.com
Provide a structure for accessing HDMI registers, so that we can use proper
read/write accessors.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Hi Eric,
I have only build-tested, as I don't have a HDMI monitor handy for testing.
From: Stephen Warren swar...@nvidia.com
A Tegra114 HW bug prevents the main CPU vector from being modified under
certain circumstances. Tegra114 A01P and later with a patched boot ROM
set the CPU reset vector to 0x4003fffc (end of IRAM). This allows placing
an arbitrary jump instruction at that
without this, patches don't get checked for proper alignment,
and e.g., for spaces after a cast and/or before a semicolon.
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
.checkpatch.conf | 3 +++
1 file changed, 3 insertions(+)
diff --git a/.checkpatch.conf b/.checkpatch.conf
index
i.e., from the linux kernel's commit
be987d9f80354e2e919926349282facd74992f90
Signed-off-by: Kim Phillips kim.phill...@freescale.com
---
tools/checkpatch.pl | 752 ++--
1 file changed, 558 insertions(+), 194 deletions(-)
diff --git
From: Fabio Estevam fabio.este...@freescale.com
Currently the following kernel hang happens when loading a 2.6.35 kernel from
Freeescale on a mx28evk board:
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bus freq driver module loaded
IMX usb
On Wed, Feb 27, 2013 at 01:18:23PM -0800, Simon Glass wrote:
Hi Tom,
I have pulled the latest series into a branch in the x86 tree. You can
also get it from patchwork. If you are happy with it, please see
below. I haven't seen any comments for a few days.
OK, building with ELDK4.2 for a
Hi Tom,
On Thu, Feb 28, 2013 at 3:00 PM, Tom Rini tr...@ti.com wrote:
On Wed, Feb 27, 2013 at 01:18:23PM -0800, Simon Glass wrote:
Hi Tom,
I have pulled the latest series into a branch in the x86 tree. You can
also get it from patchwork. If you are happy with it, please see
below. I
From: Fabio Estevam fabio.este...@freescale.com
Provide a structure for accessing HDMI registers, so that we can use proper
read/write accessors.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
Tested-by: Eric Nelson eric.nel...@boundarydevices.com
---
Changes since v1:
- Add missing
From: Stephen Warren swar...@nvidia.com
This set of ifdefs is used in a number of places. Move its definition
somewhere common so it doesn't have to be repeated.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
v2: New patch
---
disk/part.c| 10 --
From: Stephen Warren swar...@nvidia.com
Various code that is conditional upon HAVE_BLOCK_DEVICE is required by
code conditional upon CONFIG_CMD_PART. So, enable HAVE_BLOCK_DEVICE if
CONFIG_CMD_PART is enabled.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
v2: New patch
---
From: Stephen Warren swar...@nvidia.com
All Tegra devices will need CONFIG_BOUNCE_BUFFER. Move it to
tegra-common.h to ensure it's always set.
Signed-off-by: Stephen Warren swar...@nvidia.com
---
v2: Add missing word to commit subject.
This is based on u-boot-tegra/next, plus my reset vector
From: Stephen Warren swar...@nvidia.com
Enable a common set of partition types, filesystems, and related
commands in tegra-common.h, so that they are available on all Tegra
boards. This allows boot.scr (loaded and executed by the default
built-in environment) on those boards to assume that
From: Stephen Warren swar...@nvidia.com
The core implementation of help already prints the command name before
the help text of a specific command. Remove it from part's own help text
to avoid it being printed twice:
Tegra114 (Dalmore) # help part
part - disk partition related commands
Usage:
Eliminate AM33xx specific names to prepare for TI814x support
within AM33xx-land.
Signed-off-by: Matt Porter mpor...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
---
v2: no changes
---
arch/arm/cpu/armv7/am33xx/board.c |4 ++--
arch/arm/include/asm/arch-am33xx/hardware.h | 10
This series adds support for the PG1.0 TI814x EVM board. TI814x
fits into the existing AM33XX SoC support with some refactoring
of the AM33XX-specific emif4, clock, and mux code.
It has been tested booting up a Linux kernel and regression tested
on BeagleBone and EVM-SK AM33XX boards.
Changes
Split clock.c for am335x and ti814x and add ti814x specific
clock support.
Signed-off-by: Matt Porter mpor...@ti.com
---
v2:
* remove unused dmtimer support
* add register structs bit definitions
* rename soc-specific clock files for consistency
* move ti814x
AM33XX and TI814X have a similar mux though the pinmux register
layout and address space differ. Add a separate ti814x mux include
to support the TI814X-specific differences.
Signed-off-by: Matt Porter mpor...@ti.com
Reviewed-by: Tom Rini tr...@ti.com
Acked-by: Peter Korsgaard jac...@sunsite.dk
The AM33xx emif4/ddr support closely matches what is need to support
TI814x except that TI814x has two EMIF instances. Refactor all the
emif4 helper calls and the config_ddr() init function to use an
additional instance number argument.
Signed-off-by: Matt Porter mpor...@ti.com
Reviewed-by: Tom
1 - 100 of 137 matches
Mail list logo