Hi Tom, On Thursday, February 28, 2013 12:47:46 AM, Benoît Thébaudeau wrote: > Hi Tom, > > On Thursday, February 28, 2013 12:44:28 AM, Tom Rini wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > On 02/27/2013 05:18 PM, Benoît Thébaudeau wrote: > > > Hi Marek, > > > > > > On Monday, February 25, 2013 7:19:54 PM, Marek Vasut wrote: > > >> Implement u-boot.nand target that can be reused with a small > > >> amount of churn across all CPU models. The idea is to delegate > > >> the u-boot.nand target out of the main Makefile and into the > > >> CPU's Makefile (very similar to what u-boot.imx does now). The > > >> main Makefile shall only contain path to which the u-boot.nand > > >> target is delegated. Hopefully this will not produce too much > > >> bloat in the main Makefile. > > >> > > >> To demonstrate this implementation, add u-boot.nand target for > > >> i.MX53. > > >> > > >> Signed-off-by: Marek Vasut <ma...@denx.de> Cc: Benoît Thébaudeau > > >> <benoit.thebaud...@advansee.com> Cc: Fabio Estevam > > >> <fabio.este...@freescale.com> Cc: Stefano Babic <sba...@denx.de> > > >> --- Makefile | 18 ++++++++++++++++++ > > >> arch/arm/imx-common/Makefile | 6 ++++++ 2 files changed, 24 > > >> insertions(+) > > >> > > >> diff --git a/Makefile b/Makefile index 41054b7..8b1010a 100644 > > >> --- a/Makefile +++ b/Makefile @@ -470,6 +470,23 @@ > > >> $(obj)u-boot.img: $(obj)u-boot.bin $(obj)u-boot.imx: > > >> $(obj)u-boot.bin depend $(MAKE) -C $(SRCTREE)/arch/arm/imx-common > > >> $(obj)u-boot.imx > > >> > > >> +# +# Generic u-boot.nand target. +# +# Every CPU that needs > > >> u-boot.nand must add a path to an implementation of +# the actual > > >> u-boot.nand generator below. +# +ifdef CONFIG_MX53 > > >> +CONFIG_NAND_TRG_PATH := $(SRCTREE)/arch/arm/imx-common +endif + > > >> +$(obj)u-boot.nand: $(obj)u-boot.bin depend + if [ > > >> "X$(CONFIG_NAND_TRG_PATH)X" = "XX" ] ; then \ + > > >> echo "This CPU > > >> does not support u-boot.nand target!" ; \ + exit 1 > > >> ; \ + > > >> fi + $(MAKE) -C $(CONFIG_NAND_TRG_PATH) $(obj)u-boot.nand + > > >> $(obj)u-boot.kwb: $(obj)u-boot.bin $(obj)tools/mkimage -n > > >> $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ -a $(CONFIG_SYS_TEXT_BASE) > > >> -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ @@ -857,6 +874,7 @@ clobber: > > >> tidy @rm -f $(obj)u-boot.kwb @rm -f $(obj)u-boot.pbl @rm -f > > >> $(obj)u-boot.imx + @rm -f $(obj)u-boot.nand @rm -f > > >> $(obj)u-boot.ubl @rm -f $(obj)u-boot.ais @rm -f $(obj)u-boot.dtb > > >> diff --git a/arch/arm/imx-common/Makefile > > >> b/arch/arm/imx-common/Makefile index 5d5c5b2..71ea36f 100644 --- > > >> a/arch/arm/imx-common/Makefile +++ > > >> b/arch/arm/imx-common/Makefile @@ -50,6 +50,12 @@ > > >> $(obj)u-boot.imx: $(OBJTREE)/u-boot.bin $(OBJTREE)/$(patsubst > > >> "%",%,$(CONFIG_IMX $(OBJTREE)/tools/mkimage -n $(filter-out > > >> %.bin,$^) -T imximage \ -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ > > >> > > >> +$(obj)u-boot.nand: $(obj)u-boot.imx + ( > > >> \ + echo -ne > > >> '\x00\x00\x00\x00\x46\x43\x42\x20\x01' ; \ > > > ^ It does not work in my environment (Ubuntu 12.10). -ne is > > > interpreted as text, so the FCB is broken. This is because /bin/sh > > > (set to dash) is invoked by default on my machine here. It would > > > work with the /bin/bash set by the main Makefile for SHELL, but > > > this is not passed to the sub-make. > > > > > > So what do you think we should do: 1) Add "export SHELL" to the > > > main Makefile? 2) Move the SHELL assignment from the main Makefile > > > to the top-level config.mk? 3) Set "SHELL=$(SHELL)" on the command > > > line when invoking the sub-make? 4) Use printf instead of echo? 5) > > > Something else? > > > > > > I like 1). Do you see possible side effects? > > > > It looks like in these cases the kernel does $(shell echo -...), or is > > that also not working on your setup? > > I'll test that tomorrow, but I don't see how it could work better since > $(shell ...) will very likely invoke $(SHELL) -c "...". > > /bin/echo works though, but is this portable enough for U-Boot?
No, your suggestion does not work on my setup. I've looked at what Linux does, and this is not what you said: When it uses $(shell echo -...), this is not to make the arguments work, but this is because $(shell ...) is required in the context, e.g. for make variable assignments or conditional parts of Makefiles. U-Boot sets SHELL in its main Makefile and does not export it, whereas Linux sets CONFIG_SHELL and exports it, using it explicitly. Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot