Hi Stefan,
On Thu, Sep 04, 2014 at 12:23:09PM +0300, Baruch Siach wrote:
Partially revert commit 0d01f66d235118 (CFI: cfi_flash write fix for AMD
legacy).
flash_full_status_check() used to skip status register parsing when
flash_status_check() returns OK. This is wrong since
Hi
--- /dev/null
+++ b/board/bachmann/ot1200/Kconfig
@@ -0,0 +1,23 @@
+if TARGET_OT1200
+
+config SYS_CPU
+ string
+ default armv7
+
+config SYS_BOARD
+ string
+ default ot1200
+
+config SYS_VENDOR
+ string
+ default bachmann
+
+config SYS_SOC
+
Hi,
On 10/04/2014 10:48 AM, Ian Campbell wrote:
No need to be so repetitive.
Hmm, I also have a version of this in my tree, I thought I had already send
that out, but maybe I did not, see:
https://github.com/jwrdegoede/u-boot-sunxi/commit/387033b669d72b8621eeb52c4cdc503e0d63b86d
Note this
Hi,
On 10/04/2014 10:48 AM, Ian Campbell wrote:
And make TARGET_SUN[457]I a choice variable under this.
configs updated with:
sed -i -e 's/^\+S:CONFIG_TARGET_SUN.I=y/+S:CONFIG_TARGET_SUNXI=y\n/g'
configs/*
Signed-off-by: Ian Campbell i...@hellion.org.uk
Looks good:
Acked-by: Hans
Hi,
On 10/04/2014 10:48 AM, Ian Campbell wrote:
It's unfortunate that this needs to be present in both .config and spl/.config
since it makes it slightly hard to enable FEL mode for a regular defconfig. It
can be done with:
echo CONFIG_SPL_FEL=y .config
echo CONFIG_SPL_FEL=y
Hi Baruch,
On 06.10.2014 08:19, Baruch Siach wrote:
On Thu, Sep 04, 2014 at 12:23:09PM +0300, Baruch Siach wrote:
Partially revert commit 0d01f66d235118 (CFI: cfi_flash write fix for AMD
legacy).
flash_full_status_check() used to skip status register parsing when
flash_status_check() returns
On Mon, 2014-10-06 at 11:16 +0900, Masahiro Yamada wrote:
Hi Ian,
On Sat, 04 Oct 2014 10:32:04 +0100
Ian Campbell i...@hellion.org.uk wrote:
On Sat, 2014-10-04 at 09:47 +0100, Ian Campbell wrote:
Probably the board [...] selection could be moved out
without any dependencies,
On Mon, 2014-10-06 at 09:48 +0200, Hans de Goede wrote:
Hi,
On 10/04/2014 10:48 AM, Ian Campbell wrote:
No need to be so repetitive.
Hmm, I also have a version of this in my tree, I thought I had already send
that out, but maybe I did not,
Ah, it seemed familiar as I was writing it, but
On Mon, 2014-10-06 at 10:39 +0900, Masahiro Yamada wrote:
Hi Ian,
On Sat, 4 Oct 2014 09:48:11 +0100
Ian Campbell i...@hellion.org.uk wrote:
And make TARGET_SUN[457]I a choice variable under this.
configs updated with:
sed -i -e
On Mon, 2014-10-06 at 09:58 +0200, Hans de Goede wrote:
With the 2 FEL defconfigs completely removed. If you disagree with removing
them,
this is going to need some more discussion :)
I think they should be removed but in a separate patch, rather than
mixing two changes in this one. I'll add
On Sun, 2014-10-05 at 17:00 +0200, Hans de Goede wrote:
Hi,
On 10/04/2014 10:32 AM, Ian Campbell wrote:
On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
Note we also drop the SPL check for initializing the 2nd mmc slot, the SPL
check is not necessary with Kconfig, because only
On Sun, 2014-10-05 at 17:10 +0200, Hans de Goede wrote:
On 10/04/2014 10:35 AM, Ian Campbell wrote:
On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
sunxi SOCs can boot from both mmc0 and mmc2, detect from which one we're
booting, and make that one mmc dev 0 so that a single u-boot
Hi,
On 10/04/2014 10:39 AM, Ian Campbell wrote:
On Sat, 2014-10-04 at 09:38 +0100, Ian Campbell wrote:
On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index 645b236..50979e2 100644
--- a/configs/Mele_M3_defconfig
+++
Hi,
On 10/04/2014 10:37 AM, Ian Campbell wrote:
On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
None of the known sunxi devices actually use mmc1 routed through PH, where
as some devices do actually use mmc1 routed through PG, so change the routing
of mmc1 to PG. If in the future we
On Mon, 2014-10-06 at 10:37 +0200, Hans de Goede wrote:
Hi,
On 10/04/2014 10:37 AM, Ian Campbell wrote:
On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
None of the known sunxi devices actually use mmc1 routed through PH, where
as some devices do actually use mmc1 routed through
Hi,
On 10/06/2014 10:28 AM, Ian Campbell wrote:
On Mon, 2014-10-06 at 09:58 +0200, Hans de Goede wrote:
With the 2 FEL defconfigs completely removed. If you disagree with removing
them,
this is going to need some more discussion :)
I think they should be removed but in a separate patch,
Hi Fabio,
On 05/10/2014 00:45, Fabio Estevam wrote:
Hi Stefano,
On Tue, Sep 30, 2014 at 2:05 PM, Fabio Estevam
fabio.este...@freescale.com wrote:
PERST_GPIO and POWER_GPIO are currently swapped.
Fix the GPIO assignments as per the board schematics.
Signed-off-by: Fabio Estevam
Hi Marek,
On Wednesday, October 01, 2014 at 10:44:46 PM, Steve Rae wrote:
On 14-10-01 05:13 AM, Marek Vasut wrote:
On Wednesday, October 01, 2014 at 04:03:21 AM, Eric Nelson wrote:
Hi Marek,
On 09/30/2014 04:59 PM, Marek Vasut wrote:
On Tuesday, September 30, 2014 at 09:47:07
Hi Ian
On Mon, 06 Oct 2014 09:27:19 +0100
Ian Campbell i...@hellion.org.uk wrote:
Hi Ian,
On Mon, 2014-10-06 at 10:39 +0900, Masahiro Yamada wrote:
Hi Ian,
On Sat, 4 Oct 2014 09:48:11 +0100
Ian Campbell i...@hellion.org.uk wrote:
And make TARGET_SUN[457]I a choice variable under
Hi Stefan,
On Mon, Oct 06, 2014 at 10:20:43AM +0200, Stefan Roese wrote:
On 06.10.2014 08:19, Baruch Siach wrote:
On Thu, Sep 04, 2014 at 12:23:09PM +0300, Baruch Siach wrote:
Partially revert commit 0d01f66d235118 (CFI: cfi_flash write fix for AMD
legacy).
flash_full_status_check() used
On 06.10.2014 13:32, Baruch Siach wrote:
Could you please summarize again, what the real problem with this compare
is. What is the error exactly in your case (which flash chip is used and
which command was issued?)?
The Micron StrataFlash datasheet says this on Status Register bit 7 (Device
Hi Tom!
Please pull the following fix:
The following changes since commit b966db0d7259293e2c9c216c7a5dce30dacacfd9:
dw_mmc: cleanups (2014-10-03 17:26:50 +0300)
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git
for you to fetch changes up to
Hello Thierry,
Am 29.09.2014 10:11, schrieb Thierry Reding:
On Sun, Sep 28, 2014 at 04:48:47PM -0600, Simon Glass wrote:
Hi Thierry,
On 26 August 2014 09:33, Thierry Redingthierry.red...@gmail.com wrote:
From: Thierry Redingtred...@nvidia.com
This series adds PCIe support for Tegra20,
Add proper initialization of GPIO pins used by software i2c.
Signed-off-by: Robert Baldyga r.bald...@samsung.com
---
Hi Simon,
This patch is intended for your gpio-working branch. It seems that this
is only thing which is missing to make your changes working on Goni platform
(excepting patches
On Fri, Oct 03, 2014 at 10:41:09AM -0700, Tom Warren wrote:
-Original Message-
From: Stephen Warren [mailto:swar...@wwwdotorg.org swar...@wwwdotorg.org
]
Sent: Friday, October 03, 2014 8:56 AM
To: Marcel Ziswiler
Cc: u-boot@lists.denx.de; Thierry Reding; Stephen Warren;
Hi Marek, Sean,
Do you have any comments on the PHY signal driving conflict and reset
timing issue (see below)?
On 09/24/2014 05:46 AM, Nikolay Dimitrov wrote:
There's one more issue here - when you get the PHY out of reset, you'll
have to both de-assert the RESET line while keeping the
On Mon, Oct 06, 2014 at 02:15:04PM +0200, Stefan Roese wrote:
Hi Tom!
Please pull the following fix:
The following changes since commit b966db0d7259293e2c9c216c7a5dce30dacacfd9:
dw_mmc: cleanups (2014-10-03 17:26:50 +0300)
are available in the git repository at:
* fdt_fixup_mtdparts is called from ft_board_setup
* run mtdparts default to create NAND, NOR partition on uboot
* Use mtdparts to create partitions dynamically rather
than using static partitions in device tree
Signed-off-by: Ashish Kumar ashish.ku...@freescale.com
---
-Original Message-
From: Michael Walle [mailto:mich...@walle.cc]
Sent: 06 October 2014 02:40
To: u-boot@lists.denx.de
Cc: Tom Rini; Prafulla Wadaskar
Subject: Re: [PATCH] lsxl: convert to generic board and
fix typo
Am Sonntag, 28. September 2014, 00:05:23 schrieb
Michael
Hi Albert,
Please pull
The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692:
Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26 20:10:48
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-marvell.git master
DrEagle (5):
On Monday, October 06, 2014 at 11:23:53 AM, Lukasz Majewski wrote:
Hi Marek,
On Wednesday, October 01, 2014 at 10:44:46 PM, Steve Rae wrote:
On 14-10-01 05:13 AM, Marek Vasut wrote:
On Wednesday, October 01, 2014 at 04:03:21 AM, Eric Nelson wrote:
Hi Marek,
On 09/30/2014
On Monday, October 06, 2014 at 02:50:17 PM, Nikolay Dimitrov wrote:
Hi Marek, Sean,
Do you have any comments on the PHY signal driving conflict and reset
timing issue (see below)?
I don't, I sense expert knowledge from you. Now we need to wait for the authors.
I spent this weekend showing
Hi,
On 10/06/2014 10:33 AM, Ian Campbell wrote:
On Sun, 2014-10-05 at 17:10 +0200, Hans de Goede wrote:
On 10/04/2014 10:35 AM, Ian Campbell wrote:
On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
sunxi SOCs can boot from both mmc0 and mmc2, detect from which one we're
booting, and
Hi,
On 10/04/2014 10:37 AM, Ian Campbell wrote:
On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
None of the known sunxi devices actually use mmc1 routed through PH, where
as some devices do actually use mmc1 routed through PG, so change the routing
of mmc1 to PG. If in the future we
On 30/09/2014 19:05, Fabio Estevam wrote:
PERST_GPIO and POWER_GPIO are currently swapped.
Fix the GPIO assignments as per the board schematics.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 02/10/2014 03:33, Eric Nelson wrote:
Update DDR calibration settings based on a larger test set.
The initial values were gathered on a small number of boards,
and have been found to fail on some boards under load.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
On 25/09/2014 21:14, Marek Vasut wrote:
Remove this tab from env, since it's useless, just use spaces.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Stefano Babic sba...@denx.de
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 25/09/2014 21:14, Marek Vasut wrote:
Remove this tab from env, since it's useless, just use spaces.
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Stefano Babic sba...@denx.de
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
Hi Christian,
On 02/10/2014 13:33, Christian Gmeiner wrote:
This patch adds support for the OT1200 series of devices.
Following components are used in u-boot:
+ ethernet
+ i2c
+ emmc
+ gpio
For more details see README.
Changes v1 v2
- make use of enable_cspi_clock(..)
- fix
Hi Marek, Nikolay,
I thought I responded, but it might have gotten lost. I'm sorry about that.
I've taken a closer look, and responded below.
On 24/9/2014 5:40 PM, Marek Vasut wrote:
On Wednesday, September 24, 2014 at 04:46:42 AM, Nikolay Dimitrov wrote:
Hi Marek,
Following are some
Hi Eric,
On 02/10/2014 21:16, Eric Nelson wrote:
This collection of patches comprises a set of updates that have
been lingering in our Github repository.
We're pushing them to main-line in preparation for the addition
of a couple of boards that have also been lingering for a while.
U-Boot 2014.07
I'm trying to use ping 44..47 as input. I've configured PINMUX and
invoked request, direction etc. I always get 0 from gpio_get_value()
int val;
gpio_request(44, dip_s1):
gpio_request(45, dip_s2);
gpio_request(46, dip_s3);
gpio_request(47,
On Mon, 2014-10-06 at 16:43 +0200, Hans de Goede wrote:
Hi,
On 10/04/2014 10:37 AM, Ian Campbell wrote:
On Fri, 2014-10-03 at 17:05 +0200, Hans de Goede wrote:
None of the known sunxi devices actually use mmc1 routed through PH, where
as some devices do actually use mmc1 routed through
Hi Eric,
On 02/10/2014 21:16, Eric Nelson wrote:
Several customers are using UART2 (normally the serial console
for U-Boot) as connections to printers or other peripherals
that are not tolerant of stray inputs during reset.
Provide a simple way to eliminate output on the serial port
by
Hi Marek,
On 10/06/2014 05:50 AM, Marek Vasut wrote:
On Monday, October 06, 2014 at 11:23:53 AM, Lukasz Majewski wrote:
Hi Marek,
snip
There aren't any pending DFU patches, so I don't plan any PR before
our ELCE2014 meeting.
Therefore please, if possible, pull 1/3 and 2/3 to u-boot-usb
Thanks Stefano,
On 10/06/2014 08:42 AM, Stefano Babic wrote:
Hi Eric,
On 02/10/2014 21:16, Eric Nelson wrote:
Several customers are using UART2 (normally the serial console
for U-Boot) as connections to printers or other peripherals
that are not tolerant of stray inputs during reset.
On 02/10/2014 21:16, Eric Nelson wrote:
Some users (QNX and Windows CE users in particular) have asked
to disable the Penguin shown on the display at boot time.
This is really pity, but I understand :-).
Acked-by: Stefano Babic sba...@denx.de
Best regards,
Stefano Babic
--
The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692:
Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26 20:10:48
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.git topic/drivers/mmc-20141006
for you to fetch changes
The following changes since commit b966db0d7259293e2c9c216c7a5dce30dacacfd9:
dw_mmc: cleanups (2014-10-03 17:26:50 +0300)
are available in the git repository at:
git://git.denx.de/u-boot-usb.git master
for you to fetch changes up to d1fcbae1173f00917f5a71e4c074a61120605021:
usb: tegra:
On Saturday, October 04, 2014 at 01:46:10 AM, Marcel Ziswiler wrote:
Trying to enumerate USB devices connected via ULPI to T20 failed as
follows:
USB2: ULPI integrity check failed
Git bisecting revealed the following commit being at odds:
commit
The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692:
Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26 20:10:48
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.git topic/drivers/net-20141006
for you to fetch changes
The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692:
Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26 20:10:48
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.git topic/drivers/fpga-20141006
for you to fetch changes
The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692:
Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26 20:10:48
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.git topic/tools/mkimage-20141006
for you to fetch
The following changes since commit be9f643ae6aa9044c60fe80e3a2c10be8371c692:
Merge branch 'for-tom' of git://git.denx.de/u-boot-dm (2014-09-26 20:10:48
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-socfpga.git topic/arm/cache-20141006
for you to fetch changes up
Hi Tom,
this depends on the previous five pull requests, as can be seen below. I merged
the five branches and based this PR on top of the merge, I hope that's OK.
The following changes since commit 77fa164839048609e0379f4f2f276a5d6892a0eb:
Merge branches 'topic/drivers/fpga-20141006', 'topic
Hi Eric,
On 02/10/2014 21:16, Eric Nelson wrote:
Provide fixed USB networking mac addresses for host and client to enable
static configuration of host network stacks.
Include a command 'usbrecover' both to illustrate the use of the USB
ethernet gadget and also to allow quick booting of a
On 02/10/2014 21:16, Eric Nelson wrote:
Several customers have asked to leave the display quiet during
boot, so allow the user to express this request by the presence
of environment variable novideo.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx,
On 02/10/2014 21:16, Eric Nelson wrote:
From: Troy Kisky troy.ki...@boundarydevices.com
The same logic applies to both SD card slots, only with different
GPIOs and the code should make that easier to see.
Signed-off-by: Troy Kisky troy.ki...@boundarydevices.com
---
Applied to
On 02/10/2014 21:16, Eric Nelson wrote:
Pads SD2_CLK/CMD/DAT0-3 are connected to an SDIO WiFi device on
Nitrogen and unconnected on BD-SL-i.MX6 (sabre lite).
Configure them as SDIO pins to prevent them from being in a state
that confuses the WiFi part.
Signed-off-by: Eric Nelson
On 02/10/2014 21:16, Eric Nelson wrote:
Ensure that cameras and USB OTG power are in a stable (reset)
state at reset by configuring their pads and toggling GPIOs.
Signed-off-by: Troy Kisky troy.ki...@boundarydevices.com
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
On 02/10/2014 21:16, Eric Nelson wrote:
From: Troy Kisky troy.ki...@boundarydevices.com
Configure CLKO outputs for SGTL5000, CSI camera.
The sys_mclk output for the SGTL500 in particular prevents
Windows CE from properly driving audio.
Signed-off-by: Troy Kisky
On Monday, October 06, 2014 at 05:35:57 PM, Sean Cross wrote:
Hi Marek, Nikolay,
I thought I responded, but it might have gotten lost. I'm sorry about
that.
I've taken a closer look, and responded below.
OK, let me first post a V5 of the patch and then base all the changes on that,
all
On 02/10/2014 21:16, Eric Nelson wrote:
From: Troy Kisky troy.ki...@boundarydevices.com
Testing shows that the Micrel PHY may not be completely out
of reset if accessed immediately.
Signed-off-by: Troy Kisky troy.ki...@boundarydevices.com
Signed-off-by: Eric Nelson
On 02/10/2014 21:16, Eric Nelson wrote:
Declare locally-used data structures and functions as
static and pull in header files to prevent compiler warnings
of Should it be static? when building with make C=1.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to
Add support for the Kosagi Novena board. Currently supported are:
- I2C busses
- FEC Ethernet
- MMC0, MMC1, Booting from MMC
- SATA
- USB ports
- USB Ethernet
Signed-off-by: Marek Vasut ma...@denx.de
Cc: Stefano Babic sba...@denx.de
Cc: Sean Cross x...@kosagi.com
Cc: Nikolay Dimitrov
On 02/10/2014 21:16, Eric Nelson wrote:
Include declarations of board_ehci callbacks to prevent compiler warnings
and enforce function prototypes.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 02/10/2014 21:16, Eric Nelson wrote:
Add support for a 1/4 VGA panel with a 24-bit RGB interface.
No auto-detection is enabled, so you must configure the 'panel'
environment variable to use this display:
U-Boot setenv panel qvga
U-Boot saveenv reset
Signed-off-by:
On 02/10/2014 21:16, Eric Nelson wrote:
From: Robert Winkler robert.wink...@boundarydevices.com
Add support for Boundary Devices 7 and 10.1 1280x800 displays with
integrated FocalTech ft5x06 10-point touch controller.
Because they share the touch controller with the 1024x600 displays,
On 02/10/2014 21:16, Eric Nelson wrote:
Add support for LG 9.7 LVDS panel (1024x768) with integrated eGalax
touch screen.
Note that this panel differs only slightly from the Hannstar XGA panel
(margins).
No auto-detection is available because it shares the same touch controller
as the
On 02/10/2014 21:16, Eric Nelson wrote:
This patch adds support for LVDS WXGA displays that use the SPWG encoding
standard instead of JEIDA.
No auto-detection is enabled and you must explicitly set the 'panel'
environment variable:
U-Boot setenv panel LDB-WXGA-S
U-Boot
On 02/10/2014 21:16, Eric Nelson wrote:
Add support for the Touch Revolution Fusion7 display: 800x480 RGB
with a custom F0710A resistive touch controller.
Auto-detection of this panel is supported so no configuration is
required.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
On 02/10/2014 21:16, Eric Nelson wrote:
Add support for an Ampire 1024x600 LVDS panel with integrated Ilitek
capacitive touch screen.
Auto-detection is enabled, so no explicit configuration is needed.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx,
On 02/10/2014 21:16, Eric Nelson wrote:
Add support for 800x600 18-bit RGB displays using VESA GTF timings.
No auto-detection is supported, so you must configure this panel
manually through the 'panel' environment variable:
U-Boot setenv panel svga
U-Boot saveenv reset
On 02/10/2014 21:16, Eric Nelson wrote:
The HPD pin and RX_SENSE registers have proven to be less reliable
than using I2C on the EDID pins for detection of an HDMI monitor.
In particular, when the HDMI output is reset through a reboot
cycle, the detect_hdmi() routine often bounces, resulting
On 02/10/2014 21:16, Eric Nelson wrote:
Add support for WVGA (800x480) panels using VESA GTF timings over
LVDS.
No auto-detection is supported, so you must configure this panel
manually through the 'panel' environment variable:
U-Boot setenv panel svga
U-Boot saveenv
On 02/10/2014 21:16, Eric Nelson wrote:
From: Diego Rondini diego.rond...@kynetics.it
This patch enables boot to USB storage devices by expanding on the list
of boot devices.
Because the USB startup currently takes a long time, it places USB at
the end of the list of supported devices.
On 02/10/2014 21:16, Eric Nelson wrote:
Support RAM disks by setting initrd_high. See commit 7e9603e
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 02/10/2014 21:16, Eric Nelson wrote:
Add support for the USB mass storage to enable access to on-board
storage (especially eMMC and SATA).
Details at:
http://boundarydevices.com/u-boot-usb-mass-storage-gadget/
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
On 02/10/2014 21:16, Eric Nelson wrote:
From: Kevin Mihelich ke...@archlinuxarm.org
Remove the individual attempts to load using ext2 and fat, replace with the
generic load command supporting available filesystem types.
Signed-off-by: Kevin Mihelich ke...@archlinuxarm.org
---
Applied to
On 02/10/2014 21:16, Eric Nelson wrote:
Enable the 'mtest' command on Nitrogen6x and SABRE Lite boards.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 02/10/2014 21:16, Eric Nelson wrote:
Enable the use of USB keyboards on SABRE Lite and Nitrogen6x boards.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 02/10/2014 21:16, Eric Nelson wrote:
If no boot script was found, expose internal storage over the
USB mass storage gadget to allow easy programming.
This is especially useful when SD cards are inaccessible or when
loading SATA drives.
More details are available in this blog post:
On 02/10/2014 21:16, Eric Nelson wrote:
Enable the i2c edid command to query data from an attached
HDMI monitor.
Usage is typically this:
U-Boot i2c dev 1
U-Boot i2c edid 0x50
...
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to
On 02/10/2014 21:16, Eric Nelson wrote:
From: Troy Kisky troy.ki...@boundarydevices.com
Increase the maximum number of arguments allowed by the Hush parser.
This prevents errors when users or scripts aren't quoting parameters
when setting the bootargs variable et al.
Signed-off-by: Troy
On 02/10/2014 21:16, Eric Nelson wrote:
Enable the 'gpio' command to allow reading and toggling of GPIO
pins.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
On 02/10/2014 21:16, Eric Nelson wrote:
Some users (QNX and Windows CE users in particular) have asked
to disable the Penguin shown on the display at boot time.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
On 02/10/2014 21:16, Eric Nelson wrote:
Enable 'fastboot' command.
This is currently enabled but not yet functional. Including it in the
configuration will ease further testing and development as discussed
on the mailing list.
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
On 02/10/2014 21:16, Eric Nelson wrote:
From: Kevin Mihelich ke...@archlinuxarm.org
Support reading/writing ext4 partitions.
Signed-off-by: Kevin Mihelich ke...@archlinuxarm.org
Signed-off-by: Eric Nelson eric.nel...@boundarydevices.com
---
Applied to u-boot-imx, thanks !
Best regards,
Hi Stefano,
On 10/06/2014 08:54 AM, Stefano Babic wrote:
Hi Eric,
On 02/10/2014 21:16, Eric Nelson wrote:
Provide fixed USB networking mac addresses for host and client to enable
static configuration of host network stacks.
Include a command 'usbrecover' both to illustrate the use of the
Hi Marek,
On Monday, October 06, 2014 at 11:23:53 AM, Lukasz Majewski wrote:
Hi Marek,
On Wednesday, October 01, 2014 at 10:44:46 PM, Steve Rae wrote:
On 14-10-01 05:13 AM, Marek Vasut wrote:
On Wednesday, October 01, 2014 at 04:03:21 AM, Eric Nelson
wrote:
Hi Marek,
From: Baruch Siach bar...@tkos.co.il
Partially revert commit 0d01f66d235118 (CFI: cfi_flash write fix for AMD
legacy).
flash_full_status_check() used to skip status register parsing when
flash_status_check() returns OK. This is wrong since flash_status_check()
must return OK for other
Hi,
Thanks for letting me know all this. I wasn't aware that there are some
troubles using the sunxi-linux branch with the mainline u-boot.
Unfortunately there are many sources of information on the sunxi boards
and how to get things up and running but there is only limited
information about
Hi,
I now tried to get the latest version from
git://git.denx.de/u-boot-sunxi.git and then replaced the dram.c/h files
with the ones from https://github.com/linux-sunxi/u-boot-sunxi.
That seems to work. The LCD screen no longer flickers!
Regards,
Hendrik
Hello Rene,
Subject: [U-Boot] [PATCH V3 2/3] usb: eth: add ASIX AX88179 DRIVER
changes in v3:
-added all compatible devices from linux driver
-fixed issues from review
changes in v2:
-added usb_ether.h to change list
-added 2nd patch to enable driver for
Note we also drop the SPL check for initializing the 2nd mmc slot, the SPL
check is not necessary with Kconfig, because only options explicitly marked
as also being for the SPL get set during SPL builds.
Signed-off-by: Hans de Goede hdego...@redhat.com
---
board/sunxi/Kconfig | 8
Hi Ian, et al,
Here is v2 of my second sdcard slot support patch-set. Changes since v1:
-Drop sunxi: Add sunxi_gpio_get_val function, use gpio_direction_input
instead
-sunxi: Add mmc card-detect functionality:
Instead of using magic integer numbers for the card-detect pin, make it
a string
sunxi SOCs can boot from both mmc0 and mmc2, detect from which one we're
booting, and make that one mmc dev 0 so that a single u-boot binary can
be used for both the onboard eMMC and for external sdcards.
When we're booting from mmc2, we make it dev 0 because that is where the SPL
will load the
Enable the second sdcard slot found on some boards. Note that we do not
set CONFIG_MMC_SUNXI_SLOT_EXTRA for the SPL, as having it there is not useful,
Except for on the Mele-M3 where the second sdcard is an eMMC, from which the
device can also boot, and there we want to have both in the SPL, so
Signed-off-by: Hans de Goede hdego...@redhat.com
---
board/sunxi/Kconfig| 26 ++
drivers/mmc/sunxi_mmc.c| 21 +
include/configs/sunxi-common.h | 1 +
3 files changed, 48 insertions(+)
diff --git a/board/sunxi/Kconfig
None of the known sunxi devices actually use mmc1 routed through PH, where
as some devices do actually use mmc1 routed through PG, so change the routing
of mmc1 to PG. If in the future we encounter devices with mmc1 routed through
PH, we will need to change things to be a bit more flexible.
1 - 100 of 126 matches
Mail list logo