Add the ethernet DT node to the DTS file.
Signed-off-by: Stefan Roese
Cc: Daniel Schwierzeck
---
arch/mips/dts/mt7628a.dtsi | 8
1 file changed, 8 insertions(+)
diff --git a/arch/mips/dts/mt7628a.dtsi b/arch/mips/dts/mt7628a.dtsi
index c14259b170..effb36681f 100644
--- a/arch/mips/dts
On Sat, Oct 06, 2018 at 09:51:01AM +0200, Heinrich Schuchardt wrote:
> On 09/30/2018 07:26 AM, Heinrich Schuchardt wrote:
> > From: AKASHI Takahiro
> >
> > Currently, image's image_base points to an address where the image was
> > temporarily uploaded for further loading. Since efi_loader relocat
Hi Simon,
On Tue, Oct 9, 2018 at 11:41 AM Simon Glass wrote:
>
> Hi Bin,
>
> On 8 October 2018 at 02:54, Bin Meng wrote:
> > On Mon, Oct 8, 2018 at 4:36 PM Zhiqiang Hou wrote:
> >>
> >> From: Hou Zhiqiang
> >>
> >> As the PCIe specification recommend reading the Vendor ID register
> >> to dete
On Tue, Oct 9, 2018 at 5:41 AM Simon Glass wrote:
>
> Hi,
>
> On 7 October 2018 at 11:52, Simon Goldschmidt
> wrote:
> > At least on socfpga gen5, _debug_uart_putc() can be called
> > before debug_uart_init(), which leaves us stuck in an
> > infinite loop in the ns16550 debug uart driver.
>
> Can
This patch adds a driver for MT7623 clock blocks.
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt7623.c | 867 ++
2 files changed, 868 insertions(+)
create mode 100644 drivers/cl
From: Weijie Gao
This patch adds defconfig for the MT7623 Bananapi R2 board.
Signed-off-by: Weijie Gao
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
configs/mt7623n_bpir2_defconfig | 53 +
1 file changed, 53 insertions(+)
create mode 100644
This patch adds an entry for MediaTek.
Signed-off-by: Ryder Lee
---
MAINTAINERS | 17 +
1 file changed, 17 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 6147a4f..0837d3c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -157,6 +157,23 @@ T: git git://git.denx.de/u-boot-
This patch adds clock source and clock event for the timer found
on the Mediatek SoCs.
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
drivers/timer/Kconfig | 7
drivers/timer/Makefile| 1 +
drivers/timer/mtk_timer.c | 85 +++
This patch adds pinctrl support for MT7629 SoC. The IO core found on
the SoC has the registers for pinctrl, pinconf and gpio mixed up in
the same register range. Hence the driver also implements the gpio
functionality through UCLASS_GPIO.
This also creates a common file as there might be other ch
This patch adds pinctrl support for MT7623 SoC. And most of the
structures are used to hold the hardware configuration for each
pin.
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
drivers/pinctrl/mediatek/Kconfig |4 +
drivers/pinctrl/mediatek/Makefile |
This patch adds clock modules for MediaTek SoCs:
- Shared part: a common driver which contains the general operations
for plls, muxes, dividers and gates so that we can reuse it in future.
- Specific SoC part: the group of structures used to hold the hardware
configuration for each SoC.
We take M
This patch adds MT7629 device tree and the includes it needs.
Signed-off-by: Ryder Lee
---
arch/arm/dts/Makefile| 3 +
arch/arm/dts/mt7629-rfb.dts | 71 +
arch/arm/dts/mt7629.dtsi | 244 +++
include/dt-bindin
This patch adds defconfig for the MT7629 reference board.
Signed-off-by: Ryder Lee
---
configs/mt7629_rfb_defconfig | 72
1 file changed, 72 insertions(+)
create mode 100644 configs/mt7629_rfb_defconfig
diff --git a/configs/mt7629_rfb_defconfig b/co
This adds a general board file based on MT7629 SoCs from MediaTek.
Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.
Signed-off-by: Ryder Lee
Signed-off-by: Weijie Gao
---
arch/arm/Kconfig | 14 +++
arch/arm/Makef
This patch adds a DDR3 driver for MT7629 SoC.
Signed-off-by: Wu Zou
Signed-off-by: Ryder Lee
---
drivers/ram/Makefile | 1 +
drivers/ram/mediatek/Makefile | 7 +
drivers/ram/mediatek/ddr3-mt7629.c | 766 +
3 files changed, 774 insertion
This adds a power domain driver for the Mediatek SCPSYS unit.
The System Control Processor System (SCPSYS) has several power
management related tasks in the system. The tasks include thermal
measurement, dynamic voltage frequency scaling (DVFS), interrupt
filter and lowlevel sleep control. The Sys
This patch adds a common driver for the Mediatek SoC integrated
watchdog.
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
drivers/watchdog/Kconfig | 8 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/mtk_wdt.c | 135 +
3 files ch
This patch adds support for MTK boot image generation.
Signed-off-by: Weijie Gao
Signed-off-by: Ryder Lee
---
Makefile | 20 ++
common/image.c | 1 +
include/image.h | 1 +
scripts/Makefile.spl | 11 +
tools/Makefile | 1 +
tools/mtkimage.c | 749 +++
From: Weijie Gao
This adds a general board file based on MT7623 SoCs from MediaTek.
As this u-boot is loaded by preloader, there is no low level
initializtion codes.
Signed-off-by: Weijie Gao
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
arch/arm/mach-mediatek/Kconfig
From: Weijie Gao
This patch adds MT7623 host controller driver for accessing SD/MMC.
Cc: Jaehoon Chung
Signed-off-by: Weijie Gao
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
drivers/mmc/Kconfig |9 +
drivers/mmc/Makefile |1 +
drivers/mmc/mtk-sd.c | 1331 +++
This patch adds an extra operation in ns16550.c to suuport MediaTek
SoCs as we have a highspeed register which influences the calcualtion
of the divisor.
Note that we don't support the baudrate greater than 115200 currently.
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
drivers/seri
This adds power domain (scpsys) support for MT7623 SoC.
Signed-off-by: Ryder Lee
---
drivers/power/domain/mtk-power-domain.c | 80 +
1 file changed, 80 insertions(+)
diff --git a/drivers/power/domain/mtk-power-domain.c
b/drivers/power/domain/mtk-power-domain.c
i
This adds device tree for MT7623 development board - Bananapi R2
Detailed hardware information for BPI-R2 which could be found on
http://wiki.banana-pi.org/Banana_Pi_BPI-R2.
Signed-off-by: Ryder Lee
Tested-by: Matthias Brugger
---
arch/arm/dts/Makefile| 1 +
arch/arm/dts/m
Hello,
This is the second round to add U-Boot support for MediaTek SoCs - MT7623n &
MT7629,
and the most of the drivers are based on mainline Linux, such as clock, timer,
mmc,
pinctrl, watchdog, power domain and device tree.
The following are the major differences between mainline Linux and U-B
Hi Tom,
On 7 October 2018 at 12:20, Tom Rini wrote:
>
> To make testing with clang support easier, add sandbox/clang-7
> combination to our testing matrix. To facilitate this, switch to using
> the "sources" method that the travis.yml file supports to list
> additional repositories and add the o
Hi,
On 7 October 2018 at 11:52, Simon Goldschmidt
wrote:
> At least on socfpga gen5, _debug_uart_putc() can be called
> before debug_uart_init(), which leaves us stuck in an
> infinite loop in the ns16550 debug uart driver.
Can you fix that? That is a bug.
>
> Since this prevents debugging star
Hi Anatolij,
On 1 October 2018 at 14:22, Anatolij Gustschin wrote:
> Hi Simon,
>
> On Mon, 1 Oct 2018 12:22:47 -0600
> Simon Glass s...@chromium.org wrote:
>
>> At present this function uses pixels but it seems more useful for it to
>> position in terms of characters on the screen. This also mat
Hi Kever,
On 7 October 2018 at 20:42, Kever Yang wrote:
> Hi Simon,
>
> I didn't notice you already have a V2 for this patch set just now
> and have send a reply to V1.
>
> My question is:
> Is it possible to use ATAGs instead of a new 'bloblist'?
>
I thought that was a way of passi
Hi Bin,
On 8 October 2018 at 02:54, Bin Meng wrote:
> On Mon, Oct 8, 2018 at 4:36 PM Zhiqiang Hou wrote:
>>
>> From: Hou Zhiqiang
>>
>> As the PCIe specification recommend reading the Vendor ID register
>> to determine if a Function is present, read the Vendor ID of a
>> non-existent Function m
Hi Eugen,
On 2 October 2018 at 01:37, Eugen Hristev wrote:
>
>
>
> On 01.10.2018 23:22, Anatolij Gustschin wrote:
>>
>> Hi Simon,
>>
>> On Mon, 1 Oct 2018 12:22:47 -0600
>> Simon Glass s...@chromium.org wrote:
>>
>>> At present this function uses pixels but it seems more useful for it to
>>> pos
Hi Jens,
On 8 October 2018 at 01:18, Jens Wiklander wrote:
> Hi Simon,
>
> On Tue, Oct 2, 2018 at 1:21 PM, Simon Glass wrote:
>> Hi Jen,
>>
>> On 25 September 2018 at 07:40, Jens Wiklander
>> wrote:
>>> Hi,
>>>
>>> This adds support for storing AVB rollback indexes in the RPMB partition.
>>> T
Hi Otavio:
I sent a mmc patch to you which I got from vincent, please have a
try.
Otavio Salvador 于2018年10月9日周二 上午10:21写道:
> Hello Andy,
>
> On Mon, Oct 8, 2018 at 11:03 PM Andy Yan wrote:
> > Otavio Salvador 于2018年10月9日周二
> 上午3:29写道:
> > I don't have a 1108 board with emmc on my hand.
From: "Ang, Chee Hong"
Enable Stratix10 FPGA reconfiguration support in defconfig.
Signed-off-by: Ang, Chee Hong
---
configs/socfpga_stratix10_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/socfpga_stratix10_defconfig
b/configs/socfpga_stratix10_defconfig
index 5f3d733.
From: "Ang, Chee Hong"
Enable 'fpga' command in u-boot. User will be able to use the fpga
command to program the FPGA on Stratix10 SoC.
Signed-off-by: Ang, Chee Hong
---
arch/arm/mach-socfpga/misc.c | 22 ++
arch/arm/mach-socfpga/misc_s10.c | 2 ++
drivers/fpga/altera.
From: "Ang, Chee Hong"
Enable FPGA reconfiguration support for Stratix 10 SoC.
Signed-off-by: Ang, Chee Hong
---
drivers/fpga/Kconfig | 11 ++
drivers/fpga/Makefile| 1 +
drivers/fpga/stratix10.c | 288 +++
include/altera.h | 4 +
From: "Ang, Chee Hong"
Add macros for specifying number of arguments in mailbox command.
Signed-off-by: Ang, Chee Hong
---
arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
b/arch/arm/mac
From: "Ang, Chee Hong"
Summary of v3 changes:
- Patch 1/4, 2/4 and 4/4 are unchanged
- Patch 3/4: Removed unnecessary empty socfpga_fpga_add() from misc.c
- Patch 3/4: Removed unnecessary '#ifdef CONFIG_FPGA' from misc_s10.c
v2 patchsets:
https://lists.denx.de/pipermail/u-boot/2018-October/34347
On Mon, 2018-10-08 at 22:32 +0200, Marek Vasut wrote:
> On 10/08/2018 05:10 PM, Ang, Chee Hong wrote:
> >
> > On Mon, 2018-10-08 at 11:57 +0200, Marek Vasut wrote:
> > >
> > > On 10/08/2018 11:48 AM, chee.hong@intel.com wrote:
> > > >
> > > >
> > > > From: "Ang, Chee Hong"
> > > >
> > > >
On 10/08/2018 08:45 PM, Simon Goldschmidt wrote:
> On Mon, Oct 8, 2018 at 2:20 AM Marek Vasut wrote:
>>
>> On 10/07/2018 08:43 AM, Simon Goldschmidt wrote:
>>> On 09.08.2018 23:57, Marek Vasut wrote:
On 08/09/2018 09:17 PM, Simon Goldschmidt wrote:
> On Mon, Aug 6, 2018 at 3:45 PM Simon G
On 10/08/2018 08:26 PM, Simon Goldschmidt wrote:
> This patch prevents disabling the FPGA bridges when
> SPL or U-Boot is executed from FPGA onchip RAM.
>
> Signed-off-by: Simon Goldschmidt
> ---
>
> Changes in v2:
> - use less ifdefs and more C code for address checks
> (but this gives a chec
On Tue, Oct 09, 2018 at 09:21:05AM +0800, Bin Meng wrote:
> Hi Tom,
>
> On Tue, Oct 9, 2018 at 7:53 AM Tom Rini wrote:
> >
> > On Mon, Oct 08, 2018 at 04:53:54PM -0700, Bin Meng wrote:
> >
> > > Currently this uses x86_64 version toolchain for x86 build in
> > > travis-ci. Change it to i386 versi
Hello Andy,
On Mon, Oct 8, 2018 at 11:03 PM Andy Yan wrote:
> Otavio Salvador 于2018年10月9日周二 上午3:29写道:
> I don't have a 1108 board with emmc on my hand.
>
> the mmc info show that the eMMC has been detected. So would try other mmc
> commands such as: mmc read/write ?
=> mmc read 0x6200 0 0x1
Hi Otavio:
Otavio Salvador 于2018年10月9日周二 上午3:29写道:
> Hi,
>
> We have a custom board based on rv1108 evb where we are trying to add
> eMMC support.
>
> Here are the changes we made so far:
>
> arch/arm/dts/rv1108-evb.dts | 45
> +
> configs/evb-rv1108_d
Hi Tom,
On Tue, Oct 9, 2018 at 7:53 AM Tom Rini wrote:
>
> On Mon, Oct 08, 2018 at 04:53:54PM -0700, Bin Meng wrote:
>
> > Currently this uses x86_64 version toolchain for x86 build in
> > travis-ci. Change it to i386 version to avoid updating the
> > buildman toolchain path every time when the t
Hi Bin,
On Tue, Sep 25, 2018 at 10:06:52AM +0800, Bin Meng wrote:
> Hi Eugeniu,
>
> On Sun, Sep 23, 2018 at 7:10 AM Eugeniu Rosca wrote:
> >
> > Hi Bin,
> >
> > jFYI, I've created https://gcc.gnu.org/bugzilla/show_bug.cgi?id=87392
> > ("UBSAN behavior on left-shifting 1 into the sign bit is depe
On Mon, Oct 08, 2018 at 04:53:54PM -0700, Bin Meng wrote:
> Currently this uses x86_64 version toolchain for x86 build in
> travis-ci. Change it to i386 version to avoid updating the
> buildman toolchain path every time when the toolchain version
> number is changed, eg: from 7.3.0 to 8.1.0.
>
>
Currently this uses x86_64 version toolchain for x86 build in
travis-ci. Change it to i386 version to avoid updating the
buildman toolchain path every time when the toolchain version
number is changed, eg: from 7.3.0 to 8.1.0.
Signed-off-by: Bin Meng
---
.travis.yml | 16
1 fil
or32 is not supported by U-Boot anymore.
Signed-off-by: Bin Meng
---
.travis.yml | 1 -
1 file changed, 1 deletion(-)
diff --git a/.travis.yml b/.travis.yml
index 2b759c9..c0154da 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -66,7 +66,6 @@ before_script:
- if [[ "${TOOLCHAIN}" == *m68k* ]]
Hi Andy,
On Tue, Oct 9, 2018 at 12:31 AM Andy Shevchenko
wrote:
>
> On Mon, Oct 08, 2018 at 11:31:32PM +0800, Bin Meng wrote:
> > +Andy
> >
> > On Sat, Sep 8, 2018 at 5:00 PM Heinrich Schuchardt
> > wrote:
> > >
> > > make mrproper && make efi-x86_app_defconfig && make
> > >
> > > results in
>
On 10/08/2018 08:06 PM, Tom Rini wrote:
> On Mon, Sep 03, 2018 at 08:50:03PM +0200, Heinrich Schuchardt wrote:
>
>> kernel-doc fails to parse function definitions like the one below
>>
>> efi_status_t efi_create_event(uint32_t type, efi_uintn_t notify_tpl,
>>void (EFIAP
On Tue, Aug 28, 2018 at 1:32 AM Janine Hagemann wrote:
>
> The DP83867 has a muxing option for the CLK_OUT pin. It is possible
> to set CLK_OUT for different channels.
> Create a binding to select a specific clock for CLK_OUT pin.
>
> Based on commit 9708fb630d19 ("net: phy: dp83867: Add binding f
On 08/10/2018 21:36, Otavio Salvador wrote:
> On Fri, Sep 28, 2018 at 11:23 AM Otavio Salvador
> wrote:
>>
>> From: Fabio Estevam
>>
>> USB OTG2 port is connected to the USB host connector.
>>
>> Add support for it.
>>
>> Signed-off-by: Fabio Estevam
>> Signed-off-by: Otavio Salvador
>
> I thi
On 10/08/2018 05:10 PM, Ang, Chee Hong wrote:
> On Mon, 2018-10-08 at 11:57 +0200, Marek Vasut wrote:
>> On 10/08/2018 11:48 AM, chee.hong@intel.com wrote:
>>>
>>> From: "Ang, Chee Hong"
>>>
>>> Enable 'fpga' command in u-boot. User will be able to use the fpga
>>> command to program the FPGA
Hi Adam,
+Tom
Adam Ford wrote on Mon, 8 Oct 2018 14:13:03 -0500:
> Some boards (like omap3_logic) hang when trying to access
> address 0. This happens when executing the new 'mtd list' command.
> This patch enhances the checks for conditions that would
> preclude mtd_probe_devices() from opera
On Fri, Sep 28, 2018 at 11:23 AM Otavio Salvador
wrote:
>
> From: Fabio Estevam
>
> USB OTG2 port is connected to the USB host connector.
>
> Add support for it.
>
> Signed-off-by: Fabio Estevam
> Signed-off-by: Otavio Salvador
I think the serie wasn't Cced for you, by mistake. Do you mind to
Hi,
We have a custom board based on rv1108 evb where we are trying to add
eMMC support.
Here are the changes we made so far:
arch/arm/dts/rv1108-evb.dts | 45 +
configs/evb-rv1108_defconfig| 4
include/configs/evb_rv1108.h| 14 +-
On Mon, Oct 8, 2018 at 2:10 PM Thomas Petazzoni
wrote:
>
> Hello,
>
> On Mon, 8 Oct 2018 19:46:27 +0200, Boris Brezillon wrote:
>
> > > + /* Check if mtdparts/mtdids changed since last call, otherwise: exit
> > > */
> > > + if (!strcmp(mtdparts, old_mtdparts) && !strcmp(mtdids, old_mtdids))
>
Some boards (like omap3_logic) hang when trying to access
address 0. This happens when executing the new 'mtd list' command.
This patch enhances the checks for conditions that would
preclude mtd_probe_devices() from operating.
Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command")
Suggested-by: Boris
Hello,
On Mon, 8 Oct 2018 19:46:27 +0200, Boris Brezillon wrote:
> > + /* Check if mtdparts/mtdids changed since last call, otherwise: exit */
> > + if (!strcmp(mtdparts, old_mtdparts) && !strcmp(mtdids, old_mtdids))
> > + return 0;
>
> Should be:
>
> if ((!mtdparts && !ol
On Mon, 8 Oct 2018 13:39:31 -0500
Adam Ford wrote:
> Some boards using simple NAND drivers (like omap3_logic) hang
> when executing the new 'mtd list' command. This patch enhances
^One too many spaces here.
Also, i don't think it has to do with simp
On Mon, Oct 8, 2018 at 2:20 AM Marek Vasut wrote:
>
> On 10/07/2018 08:43 AM, Simon Goldschmidt wrote:
> > On 09.08.2018 23:57, Marek Vasut wrote:
> >> On 08/09/2018 09:17 PM, Simon Goldschmidt wrote:
> >>> On Mon, Aug 6, 2018 at 3:45 PM Simon Goldschmidt
> >>> wrote:
>
>
> Marek V
Some boards using simple NAND drivers (like omap3_logic) hang
when executing the new 'mtd list' command. This patch enhances
the checks for conditions that would preclude mtd_probe_devices()
from operating.
Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command")
Suggested-by: Boris Brezillon
Signed
On Mon, Oct 8, 2018 at 1:28 PM Boris Brezillon
wrote:
>
> On Mon, 8 Oct 2018 13:23:06 -0500
> Adam Ford wrote:
>
> > Some boards using simple NAND drivers (like omap3_logic) hang
> > when executing the new 'mtd list' command. This patch enhances
> > the checks for conditions that would preclude
On Mon, 8 Oct 2018 13:23:06 -0500
Adam Ford wrote:
> Some boards using simple NAND drivers (like omap3_logic) hang
> when executing the new 'mtd list' command. This patch enhances
> the checks for conditions that would preclude mtd_probe_devices()
> from operating.
>
> Fixes: 5db66b3aee6f ("cm
This patch prevents disabling the FPGA bridges when
SPL or U-Boot is executed from FPGA onchip RAM.
Signed-off-by: Simon Goldschmidt
---
Changes in v2:
- use less ifdefs and more C code for address checks
(but this gives a checkpatch warning because of comparing two
upper case constants)
- c
On Mon, Oct 8, 2018 at 12:46 PM Boris Brezillon
wrote:
>
> On Mon, 1 Oct 2018 15:43:29 +0200
> Miquel Raynal wrote:
>
> > +#if defined(CONFIG_MTD_PARTITIONS)
> > +int mtd_probe_devices(void)
> > +{
> > + static char *old_mtdparts;
> > + static char *old_mtdids;
> > + const char *mtdp
Some boards using simple NAND drivers (like omap3_logic) hang
when executing the new 'mtd list' command. This patch enhances
the checks for conditions that would preclude mtd_probe_devices()
from operating.
Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command")
Signed-off-by: Adam Ford
diff --git
On Mon, Sep 03, 2018 at 08:50:03PM +0200, Heinrich Schuchardt wrote:
> kernel-doc fails to parse function definitions like the one below
>
> efi_status_t efi_create_event(uint32_t type, efi_uintn_t notify_tpl,
> void (EFIAPI *notify_function) (
>
On Mon, 1 Oct 2018 15:43:29 +0200
Miquel Raynal wrote:
> +#if defined(CONFIG_MTD_PARTITIONS)
> +int mtd_probe_devices(void)
> +{
> + static char *old_mtdparts;
> + static char *old_mtdids;
> + const char *mtdparts = env_get("mtdparts");
> + const char *mtdids = env_get("mtdids");
On Mon, 8 Oct 2018 11:58:40 -0500
Adam Ford wrote:
> On Mon, Oct 8, 2018 at 11:52 AM Adam Ford wrote:
> >
> > On Mon, Oct 8, 2018 at 11:28 AM Boris Brezillon
> > wrote:
> > >
> > > Hi Adam,
> > >
> > > On Mon, 8 Oct 2018 11:13:40 -0500
> > > Adam Ford wrote:
> > >
> > > > On Wed, Oct 3, 20
On Mon, Oct 8, 2018 at 11:52 AM Adam Ford wrote:
>
> On Mon, Oct 8, 2018 at 11:28 AM Boris Brezillon
> wrote:
> >
> > Hi Adam,
> >
> > On Mon, 8 Oct 2018 11:13:40 -0500
> > Adam Ford wrote:
> >
> > > On Wed, Oct 3, 2018 at 8:41 AM Adam Ford wrote:
> > > >
> > > > On Wed, Oct 3, 2018 at 8:35 AM
On Mon, Oct 8, 2018 at 11:28 AM Boris Brezillon
wrote:
>
> Hi Adam,
>
> On Mon, 8 Oct 2018 11:13:40 -0500
> Adam Ford wrote:
>
> > On Wed, Oct 3, 2018 at 8:41 AM Adam Ford wrote:
> > >
> > > On Wed, Oct 3, 2018 at 8:35 AM Miquel Raynal
> > > wrote:
> > > >
> > > > Hi Adam,
> > > >
> > > > > >
On 10/07/2018 03:21 AM, Rajesh Bhagat wrote:
> Includes changes in u-boot framework to support TF-A for NXP Chassis 2
>
> platforms. A new defconfig is added namely ls*_ram_defconfig which will
>
> be used for all boot sources when TF-A is used.
>
On Mon, Oct 08, 2018 at 11:31:32PM +0800, Bin Meng wrote:
> +Andy
>
> On Sat, Sep 8, 2018 at 5:00 PM Heinrich Schuchardt wrote:
> >
> > make mrproper && make efi-x86_app_defconfig && make
> >
> > results in
> >
> > CC common/image.o
> > {standard input}: Assembler messages:
> > {standard i
Hi Adam,
On Mon, 8 Oct 2018 11:13:40 -0500
Adam Ford wrote:
> On Wed, Oct 3, 2018 at 8:41 AM Adam Ford wrote:
> >
> > On Wed, Oct 3, 2018 at 8:35 AM Miquel Raynal
> > wrote:
> > >
> > > Hi Adam,
> > >
> > > > >
> > > > > >
> > > > > > >
> > > > > > > I can use the nand read/write func
On Wed, Oct 3, 2018 at 8:41 AM Adam Ford wrote:
>
> On Wed, Oct 3, 2018 at 8:35 AM Miquel Raynal
> wrote:
> >
> > Hi Adam,
> >
> > > >
> > > > >
> > > > > >
> > > > > > I can use the nand read/write functions and mtdparts lists the
> > > > > > partitions, so I know nand works. My defconfig
> >
Hi Rick,
On Mon, Oct 8, 2018 at 1:36 PM Andes wrote:
>
> From: Rick Chen
>
> Separate ax25-ae350 from one to two for
> 32 and 64 bit individually. And also select
> different dts for 32 and 64 bit.
>
> Signed-off-by: Rick Chen
> Cc: Greentime Hu
> ---
> configs/ax25-ae350-32_defconfig | 33 ++
Hi Rick,
On Mon, Oct 8, 2018 at 1:37 PM Andes wrote:
>
> From: Rick Chen
>
> Add ae350_32.dts for 32 bit. And also rename
> ae350.dts to ae350_64.dts for 64 bit.
>
> Signed-off-by: Rick Chen
> Cc: Greentime Hu
> ---
> arch/riscv/dts/ae350.dts| 229
> --
+Andy
On Sat, Sep 8, 2018 at 5:00 PM Heinrich Schuchardt wrote:
>
> make mrproper && make efi-x86_app_defconfig && make
>
> results in
>
> CC common/image.o
> {standard input}: Assembler messages:
> {standard input}:21662: Error: junk at end of line, first unrecognized
> character is `@'
>
On Tue, Oct 02, 2018 at 01:22:28PM +0200, Marek Behún wrote:
> Tested-by: Marek Behún
>
> Hello Tom, could you please apply the patch by Yevgeny?
Sorry, I'll just lament that patchwork no longer has the ability to list
unassigned patches anymore. I've given this to myself in patchwork and
will
On Mon, 2018-10-08 at 11:57 +0200, Marek Vasut wrote:
> On 10/08/2018 11:48 AM, chee.hong@intel.com wrote:
> >
> > From: "Ang, Chee Hong"
> >
> > Enable 'fpga' command in u-boot. User will be able to use the fpga
> > command to program the FPGA on Stratix10 SoC.
> >
> > Signed-off-by: Ang,
On 10/08/2018 06:51 AM, Bin Meng wrote:
> Per T1040RM (Rev. 1, 08/2015), the value of
> FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT is wrong
> and should be 0x0080 (bit 440 in the RCW).
>
> Signed-off-by: Bin Meng
> ---
Poonam,
Please review and confirm on T1040. Thanks.
York
On 10/07/2018 03:22 AM, Rajesh Bhagat wrote:
> TFABOOT support includes:
> - ls1046ardb_tfa_defconfig to be loaded by trusted firmware
> - environment address and size changes for TFABOOT
> - FMAN address changes for TFABOOT
> - define BOOTCOMMAND for TFABOOT
>
> Signed-off-by: York Sun
> Sig
On 10/07/2018 03:21 AM, Rajesh Bhagat wrote:
> Removes EL3 specific erratas for TFABOOT, And now taken care in TFA.
>
> ARM_ERRATA_855873, SYS_FSL_ERRATUM_A008850, SYS_FSL_ERRATUM_A008511,
> SYS_FSL_ERRATUM_A008336, SYS_FSL_ERRATUM_A009663, SYS_FSL_ERRATUM_A009803
> SYS_FSL_ERRATUM_A009942, SYS_FS
On 10/07/2018 03:21 AM, Rajesh Bhagat wrote:
> From: York Sun
>
> Move static definitions to cpu.c file, as it doesn't allow
> the cpu.h file to be included in multiple c files.
>
> Signed-off-by: York Sun
> ---
> Change in v2: None
>
Rajesh,
Did you send your patch set twice? I received two
Hi,
st 3. 10. 2018 v 7:58 odesílatel Michal Simek
napsal:
> Xilinx is introducing Versal, an adaptive compute acceleration platform
> (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
> Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
> Engines with leadi
On 8.10.2018 14:39, Simon Glass wrote:
> On 6 October 2018 at 07:33, Patrice CHOTARD wrote:
>>
>> Hi
>>
>> I got same issue on STM32F746
>>
>> Patrice
>>
>> On 10/04/2018 09:24 AM, Michal Simek wrote:
>>> This reverts commit c35a7d375ec8f0a8ee343ae4868be3242172632e.
>>> This commit is breaking SPL
čt 4. 10. 2018 v 9:39 odesílatel Michal Simek
napsal:
> Add access to efuse for Zynq-7000S device detection.
>
> Signed-off-by: Michal Simek
> ---
>
> arch/arm/dts/zynq-7000.dtsi | 5 +
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.d
út 2. 10. 2018 v 8:49 odesílatel Michal Simek
napsal:
> Xilinx DLC20 has I2C0 with EEPROM(1KB), UART1, GPIO, SD0 (EMMC 4GB),
> USB0 device, ENET0, QSPI (16MB) and DDR(two of 256MB each).
>
> Boards have mix of Winbond/ST QSPIs.
>
> Signed-off-by: Michal Simek
> ---
>
> Changes in v2:
> - zynq700
st 26. 9. 2018 v 10:56 odesílatel Michal Simek
napsal:
> Enable loading FPGA from FIT image in SPL.
>
> Signed-off-by: Michal Simek
> ---
>
> configs/zynq_zc706_defconfig | 4
> 1 file changed, 4 insertions(+)
>
> diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
> i
On 10/08/2018 03:17 PM, Simon Goldschmidt wrote:
> On Mon, Oct 8, 2018 at 1:42 PM Marek Vasut wrote:
>>
>> On 10/08/2018 06:04 AM, Simon Goldschmidt wrote:
>>>
>>>
>>> Marek Vasut mailto:ma...@denx.de>> schrieb am Mo., 8.
>>> Okt. 2018, 02:20:
>>>
>>> On 10/07/2018 01:08 PM, Simon Goldschmidt
Dear Vincenzo,
In message
you wrote:
>
> > qemu-system-ppc -cpu e500v2 -M ppce500 -nographic -kernel ~/u-boot -net nic
> > -net tap,ifname=tap0,script=no
>
> I tried to use different -net options in qemu but the problem is always the
> same.
>
> And from the u-boot source code I have edite
Per T1040RM (Rev. 1, 08/2015), there are 2 issues with the RCW EC2
settings.
- The value of FSL_CORENET_RCWSR13_EC2_FM1_GPIO is wrong and should
be 0x0400 (value of 1 in RCW bit [420:421])
- Value of 2/3 are reserved in RCW bit [420:421], hence there is no
macro FSL_CORENET_RCWSR13_EC2_FM1
Per T1040RM (Rev. 1, 08/2015), the value of
FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT is wrong
and should be 0x0080 (bit 440 in the RCW).
Signed-off-by: Bin Meng
---
arch/powerpc/include/asm/immap_85xx.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/incl
This patch adds ethernet support for the Mediatek MT76xx SoC, including
a minimum setup of the integrated switch. This driver is loosly based on
the driver version included in this MediaTek github repository:
https://github.com/MediaTek-Labs/linkit-smart-uboot.git
Tested on the MT7688 LinkIt smar
Hi Daniel,
On 07.10.2018 20:51, Daniel Schwierzeck wrote:
On 04.10.2018 13:39, Stefan Roese wrote:
This patch adds ethernet support for the Mediatek MT76xx SoC, including
a minimum setup of the integrated switch. This driver is loosly based on
the driver version included in this MediaTek gith
Hello guys,
I am running an image of U-boot 2018.09 in qemu 3.0, the goal would be to load
an OS-9 rom file from tftp.
The problem is that I can't manage to have an Internet connection in U-boot. No
matter how I run the image I always have Net: "No Ethernet found".
I run qemu 3.0 with the follo
On Mon, Oct 8, 2018 at 1:42 PM Marek Vasut wrote:
>
> On 10/08/2018 06:04 AM, Simon Goldschmidt wrote:
> >
> >
> > Marek Vasut mailto:ma...@denx.de>> schrieb am Mo., 8.
> > Okt. 2018, 02:20:
> >
> > On 10/07/2018 01:08 PM, Simon Goldschmidt wrote:
> > > On 06.10.2018 22:38, Tom Rini wrote:
On Thu, 2018-10-04 at 21:31 +0530, Jagan Teki wrote:
> On Tue, Oct 2, 2018 at 4:38 PM Ryder Lee wrote:
> >
> > From: Guochun Mao
> >
> > This patch adds MT7629 qspi driver for accessing SPI NOR flash.
> >
> > Cc: Jagan Teki
> > Signed-off-by: Guochun Mao
> > ---
> > drivers/spi/Kconfig|
On 6 October 2018 at 07:33, Patrice CHOTARD wrote:
>
> Hi
>
> I got same issue on STM32F746
>
> Patrice
>
> On 10/04/2018 09:24 AM, Michal Simek wrote:
> > This reverts commit c35a7d375ec8f0a8ee343ae4868be3242172632e.
> > This commit is breaking SPL on zc706.
> >
> > Signed-off-by: Michal Simek
>
1 - 100 of 139 matches
Mail list logo