The code to check if a registration key is a valid key returned by
RegisterProtocolNotify() can be reused. So let us factor it out into a new
function efi_check_register_notify_event().
Signed-off-by: Heinrich Schuchardt
---
lib/efi_loader/efi_boottime.c | 31 +++
1
k3_rproc driver is specifically meant for controlling an arm64
core using TISCI protocol. So rename the driver, Kconfig symbol,
compatible and functions accordingly.
While at it drop this remoteproc selection for a53 defconfig.
Signed-off-by: Lokesh Vutla
---
configs/am65x_evm_a53_defconfig
'rproc list' is currently allowed only after probing all the
available remoteproc devices. Given that 'rproc init' is updated
to probe and initialize devices individually, allow the 'rproc list'
command to print all probed devices at any point.
Signed-off-by: Lokesh Vutla
---
cmd/remoteproc.c |
Update the k3_rproc driver to use the generic ti_sci_proc helper
apis which simplifies the driver a bit.
Signed-off-by: Lokesh Vutla
---
drivers/remoteproc/k3_rproc.c | 79 ++-
1 file changed, 31 insertions(+), 48 deletions(-)
diff --git
Texas Instruments' K3 generation SoCs has specific modules/register
spaces used for configuring the various aspects of a remote processor.
These include power, reset, boot vector and other configuration features
specific to each compute processor present on the SoC. These registers
are managed by
'rproc init' does the probe and initialization of all the available
remoteproc devices in the system. This doesn't allow the flexibility
to initialize the remote cores needed as per use case. In order
to provide flexibility, update 'rproc init' command to accept one
more parameter with rproc id
This series introduces generic proc helpers for controlling remotecores
using TISCI protocol. Update the k3_rproc driver to use this generic
proc helpers and rename it ti_k3_arm64_rproc as it is controlling arm64
core on k3 devices. This acts as base series for the other remoteprocs
(like r5s,
On 27/05/19 5:53 PM, Fabien Dessenne wrote:
> The current implementation supports only binary file load.
> Add helpers to support ELF format (sanity check, and load).
> Note that since an ELF image is built for the remote processor, the load
> function uses the device_to_virt ops to translate
On Tue, May 28, 2019 at 6:50 PM Greentime Hu wrote:
>
> Hi Bin,
> On Tue, May 28, 2019 at 05:58:47PM +0800, Bin Meng wrote:
> > Hi Greentime,
> >
> > On Tue, May 28, 2019 at 3:54 PM Greentime Hu
> > wrote:
> > >
> > > Hi Bin,
> > > On Fri, May 24, 2019 at 05:40:08PM +0800, Bin Meng wrote:
> > >
This patch is to fixed the reg read to "0" for armv7
architecture.
Signed-off-by: Peng Ma
---
arch/arm/dts/ls1021a.dtsi |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi
index 5bde3f3..0e00ac2 100644
---
> Subject: [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code
>
> Dropped useless code for i.MX eSDHC driver.
>
> Signed-off-by: Yangbo Lu
> ---
> Changes for v2:
> - Added this patch.
> Changes for v3:
> - None.
> ---
> drivers/mmc/fsl_esdhc_imx.c | 96
> -Original Message-
> From: Y.b. Lu
> Sent: Tuesday, May 21, 2019 4:52 PM
> To: u-boot@lists.denx.de
> Cc: Stefano Babic ; Fabio Estevam ;
> dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gmeiner ; Stefan Roese ; Patrick
>
> Subject: [v3, 4/5] mmc: fsl_esdhc: drop i.MX code
>
> Dropped i.MX code which couldn't be reused.
>
> Signed-off-by: Yangbo Lu
> ---
> Changes for v2:
> - Added this patch.
> Changes for v3:
> - Rebased.
> ---
> drivers/mmc/fsl_esdhc.c | 609
> -Original Message-
> From: Y.b. Lu
> Sent: Tuesday, May 21, 2019 4:52 PM
> To: u-boot@lists.denx.de
> Cc: Stefano Babic ; Fabio Estevam ;
> dl-uboot-imx ; Albert Aribaud
> ; Eddy Petrișor ;
> Akshay Bhat ; Ken Lin
> ; Heiko Schocher ; Christian
> Gmeiner ; Stefan Roese ; Patrick
>
> Subject: [v3, 2/5] mmc: split fsl_esdhc driver for i.MX
>
> The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX initially.
> The later QoriQ series PowerPC processors (which were evolutions of
> MPC83XX/MPC85XX), QorIQ series ARM processors, and i.MX series
> processors were using
> Subject: [v3, 1/5] Move CONFIG_FSL_ESDHC to defconfig
>
> Moved CONFIG_FSL_ESDHC from header files to defconfig files.
>
> Signed-off-by: Yangbo Lu
> ---
> Changes for v2:
> - Rebased.
> Changes for v3:
> - Rebased.
> ---
> configs/imx8mq_evk_defconfig | 1 +
>
This converts LEGO MINDSTORMS EV3 to the driver model. MMC, SERIAL, SPI
and SPI_FLASH are converted.
The device tree contains only the minimal nodes required by U-Boot
since the size of U-Boot is limited to 256K on this device.
Signed-off-by: David Lechner
---
arch/arm/dts/Makefile |
On 5/28/19 8:52 PM, Adam Ford wrote:
On Tue, May 28, 2019 at 7:03 PM David Lechner wrote:
This adds a define for CONFIG_SKIP_LOWLEVEL_INIT in the legoev3 config.
On the EV3, U-Boot is loaded into RAM by another bootloader, so we
don't need the lowlevel init in U-Boot.
Signed-off-by: David
On Tue, May 28, 2019 at 7:03 PM David Lechner wrote:
>
> This adds a define for CONFIG_SKIP_LOWLEVEL_INIT in the legoev3 config.
> On the EV3, U-Boot is loaded into RAM by another bootloader, so we
> don't need the lowlevel init in U-Boot.
>
> Signed-off-by: David Lechner
> ---
>
On Tue, May 28, 2019 at 7:49 PM Marek Vasut wrote:
>
> On 5/29/19 2:00 AM, Derald Woods wrote:
> > On Tue, May 28, 2019 at 6:27 PM Marek Vasut wrote:
> >>
> >> On 5/29/19 1:16 AM, Derald Woods wrote:
> >>> On Tue, May 28, 2019 at 4:16 PM Marek Vasut wrote:
>
> On 5/28/19 4:22 AM,
On 5/29/19 2:00 AM, Derald Woods wrote:
> On Tue, May 28, 2019 at 6:27 PM Marek Vasut wrote:
>>
>> On 5/29/19 1:16 AM, Derald Woods wrote:
>>> On Tue, May 28, 2019 at 4:16 PM Marek Vasut wrote:
On 5/28/19 4:22 AM, Derald D. Woods wrote:
> This commit addresses the following
This adds a define for CONFIG_SKIP_LOWLEVEL_INIT in the legoev3 config.
On the EV3, U-Boot is loaded into RAM by another bootloader, so we
don't need the lowlevel init in U-Boot.
Signed-off-by: David Lechner
---
include/configs/legoev3.h | 1 +
1 file changed, 1 insertion(+)
diff --git
On Tue, May 28, 2019 at 6:27 PM Marek Vasut wrote:
>
> On 5/29/19 1:16 AM, Derald Woods wrote:
> > On Tue, May 28, 2019 at 4:16 PM Marek Vasut wrote:
> >>
> >> On 5/28/19 4:22 AM, Derald D. Woods wrote:
> >>> This commit addresses the following warning, when _NOT_ USB_MUSB_HOST:
> >>>
> >>>
Signed-off-by: Michael Walle
---
Btw if anybody notices the compatible string difference to the rv3029
driver, ie mc,rv3029 vs microcrystal,rv8803. The "mc" prefix is actually
the legacy one.
changes since v1:
- enable driver in sandbox_defconfig and sandbox64_defconfig
On 5/29/19 1:16 AM, Derald Woods wrote:
> On Tue, May 28, 2019 at 4:16 PM Marek Vasut wrote:
>>
>> On 5/28/19 4:22 AM, Derald D. Woods wrote:
>>> This commit addresses the following warning, when _NOT_ USB_MUSB_HOST:
>>>
>>> [...]
>>> CC drivers/usb/gadget/f_mass_storage.o
>>> CC
On Tue, May 28, 2019 at 4:16 PM Marek Vasut wrote:
>
> On 5/28/19 4:22 AM, Derald D. Woods wrote:
> > This commit addresses the following warning, when _NOT_ USB_MUSB_HOST:
> >
> > [...]
> > CC drivers/usb/gadget/f_mass_storage.o
> > CC drivers/usb/musb-new/omap2430.o
> > CC
On Mon, May 20, 2019 at 06:29:38PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski
>
> There are no more users of lowlevel_init.S. Remove the file.
>
> Suggested-by: Adam Ford
> Signed-off-by: Bartosz Golaszewski
NAK, legoev3 still uses this.
--
Tom
signature.asc
On Tue, 28 May 2019 15:19:37 +
Igor Opaniuk igor.opan...@toradex.com wrote:
...
> diff --git a/common/splash.c b/common/splash.c
> index d251b3b654..f026390393 100644
> --- a/common/splash.c
> +++ b/common/splash.c
> @@ -80,11 +80,23 @@ void splash_get_pos(int *x, int *y)
> }
> #endif /*
On 5/28/19 4:22 AM, Derald D. Woods wrote:
> This commit addresses the following warning, when _NOT_ USB_MUSB_HOST:
>
> [...]
> CC drivers/usb/gadget/f_mass_storage.o
> CC drivers/usb/musb-new/omap2430.o
> CC drivers/usb/gadget/f_fastboot.o
> CC env/common.o
> CC
On Fri, 17 May 2019 11:17:20 +0200
Bartosz Golaszewski b...@bgdev.pl wrote:
> From: Bartosz Golaszewski
>
> This board still doesn't select CONFIG_DM and seems to be umaintained.
> As it makes progress on modernizing several DaVinci drivers more
> difficult and the maintainer has not expressed
Am 27.05.2019 um 18:25 schrieb Masahiro Yamada:
On Fri, May 24, 2019 at 5:17 AM Tom Rini wrote:
On Thu, May 23, 2019 at 10:08:54PM +0200, Simon Goldschmidt wrote:
Am 13.05.2019 um 14:45 schrieb Simon Goldschmidt:
On Sat, May 11, 2019 at 3:55 AM Tom Rini wrote:
On Mon, Apr 22, 2019 at
On 5/28/19 1:19 PM, Tom Rini wrote:
> On Tue, May 28, 2019 at 05:24:34AM +0200, Marek Vasut wrote:
>> On 5/28/19 5:04 AM, Tom Rini wrote:
>>> On Tue, May 28, 2019 at 04:44:52AM +0200, Marek Vasut wrote:
On 5/28/19 4:42 AM, Tom Rini wrote:
> On Tue, May 28, 2019 at 04:07:44AM +0200, Marek
On Tue, May 28, 2019 at 07:18:34PM +0200, Heinrich Schuchardt wrote:
> On 5/24/19 7:10 AM, AKASHI Takahiro wrote:
> >File system tests, test_fs, relies on guestmount so that it can be
> >executed in a user mode. Describe this in README.md.
> >
> >Signed-off-by: AKASHI Takahiro
> >---
> >
On 5/24/19 7:10 AM, AKASHI Takahiro wrote:
File system tests, test_fs, relies on guestmount so that it can be
executed in a user mode. Describe this in README.md.
Signed-off-by: AKASHI Takahiro
---
test/py/README.md | 19 ++-
1 file changed, 10 insertions(+), 9 deletions(-)
On Tue, May 28, 2019 at 06:46:36PM +0200, Heinrich Schuchardt wrote:
> As both Tom and I wrote to you in reply of to the first version of the
> patch it is not clear how these tests can be run.
>
> make tests
>
> simply skips them.
>
> Could you, please, provide a description in
On 5/24/19 7:10 AM, AKASHI Takahiro wrote:
File system tests, test_fs, relies on guestmount so that it can be
executed in a user mode. Describe this in README.md.
It is unclear where commands from package libguestfs-tools are used. I
could not find any script in directory test/ using it.
As
As both Tom and I wrote to you in reply of to the first version of the
patch it is not clear how these tests can be run.
make tests
simply skips them.
Could you, please, provide a description in test/py/README.md.
Best regards
Heinrich
On 5/24/19 7:10 AM, AKASHI Takahiro wrote:
Two test
Tom,
Please pull u-boot-tegra/master into U-Boot/master. Thanks!
All Tegra builds are OK, and Stephen's automated test system reports that
all tests pass.
The following changes since commit 40920bdecc4e1b7096de6f546d7b5c2185554ba6:
Merge tag 'dm-pull-22may19' of git://git.denx.de/u-boot-dm
Am 28.05.2019 um 17:18 schrieb Jean-Jacques Hiblot:
On 27/05/2019 17:15, Simon Goldschmidt wrote:
Tom Rini mailto:tr...@konsulko.com>> schrieb am
Mo., 27. Mai 2019, 16:54:
On Mon, May 27, 2019 at 03:47:13PM +0200, Jean-Jacques Hiblot wrote:
> Simon,
>
>
> On 24/05/2019
A couple minor tweaks to printed strings in cmd/fpga.c.
Signed-off-by: Robert P. J. Day
---
diff --git a/cmd/fpga.c b/cmd/fpga.c
index b1f224bc6a..62453f0a8f 100644
--- a/cmd/fpga.c
+++ b/cmd/fpga.c
@@ -458,7 +458,7 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga_wrapper,
"0-device key, 1-user
On Tue, May 28, 2019 at 4:26 PM Thierry Reding wrote:
>
> On Mon, May 20, 2019 at 05:59:57PM +0200, Thierry Reding wrote:
> > From: Thierry Reding
> >
> > Add the standard Ethernet device tree bindings (imported from v5.0 of
> > the Linux kernel) and implement support for reading the MAC address
On Mon, May 20, 2019 at 05:59:57PM +0200, Thierry Reding wrote:
> From: Thierry Reding
>
> Add the standard Ethernet device tree bindings (imported from v5.0 of
> the Linux kernel) and implement support for reading the MAC address for
> Ethernet devices in the Ethernet uclass. If the
Currently for CONFIG_DM_VIDEO=y setting splashimage env variable doesn't
have any effect. Introduce a common function for both dm-video/lcd stacks,
that checks env("splashimage") and invokes bmp_display() accordingly.
For additional details please check discussion [1].
[1]
On 27/05/2019 17:15, Simon Goldschmidt wrote:
Tom Rini mailto:tr...@konsulko.com>> schrieb am
Mo., 27. Mai 2019, 16:54:
On Mon, May 27, 2019 at 03:47:13PM +0200, Jean-Jacques Hiblot wrote:
> Simon,
>
>
> On 24/05/2019 22:10, Simon Goldschmidt wrote:
> >Am 24.05.2019
Currently for CONFIG_DM_VIDEO=y setting splashimage env variable doesn't
have any effect. Introduce a common function for both dm-video/lcd stacks,
that checks env("splashimage") and invokes bmp_display() accordingly.
For additional details please check discussion [1].
[1]
On Mon, May 27, 2019 at 6:46 AM Sekhar Nori wrote:
>
> U-Boot README recommends initializing SDRAM in board_init_f(). DA850
> was doing it as part of board_init_r() (through call to spl_board_init()
> which calls arch_cpu_init() which calls da850_ddr_setup())
>
> This worked fine till commit
On Tue, May 28, 2019 at 2:58 AM Bartosz Golaszewski wrote:
>
> From: Bartosz Golaszewski
>
> Enable CONFIG_SPL_DM and enable the driver model for serial by defining
> an appropriate device in the board file for da850-lcdk.
>
> Signed-off-by: Bartosz Golaszewski
> ---
>
On Mon, May 27, 2019 at 10:23:21PM +0200, Michael Walle wrote:
> Signed-off-by: Michael Walle
> ---
>
> Btw if anybody notices the compatible string difference to the rv3029
> driver, ie mc,rv3029 vs microcrystal,rv8803. The "mc" prefix is actually
> the legacy one.
>
> drivers/rtc/Kconfig |
On 5/28/2019 4:19 AM, Tom Rini wrote:
On Tue, May 28, 2019 at 05:24:34AM +0200, Marek Vasut wrote:
On 5/28/19 5:04 AM, Tom Rini wrote:
On Tue, May 28, 2019 at 04:44:52AM +0200, Marek Vasut wrote:
On 5/28/19 4:42 AM, Tom Rini wrote:
On Tue, May 28, 2019 at 04:07:44AM +0200, Marek Vasut wrote:
Hi Anatolij,
On Tue, May 28, 2019 at 3:31 PM Anatolij Gustschin wrote:
>
> Hi Igor,
>
> On Tue, 28 May 2019 13:35:13 +0300
> Igor Opaniuk igor.opan...@gmail.com wrote:
>
> > Hi all,
> >
> > Just a clarifying question:
> > I assume a splash screen functionality from common/splash.c and
> >
On 28.05.19 15:06, Kever Yang wrote:
> Hi Christoph,
>
> This patch need re-base upon latest mainline tree.
>
> And see below commons.
>
>
> On 05/07/2019 04:42 PM, Christoph Muellner wrote:
>> This commit reduces the SPL size by fixing typos in the removed property
>> string list,
Hi Christoph,
On 05/07/2019 05:11 PM, Christoph Muellner wrote:
> This patch cleans up make_fit_atf.py in the following way:
>
> * Fix all issues reported by pylint
> * Move copyright notice from file-to-generate to script
> * Fix of-by-one bugs in loadables property
> * Remove commented-out
On 28.05.19 14:55, Kever Yang wrote:
> Hi Christoph and Mark,
>
> Does this patch ready for rk3399-puma?
Hi Kever,
yes, this commit is ready for mainline.
However, there are more (not Puma specific) commits needed to make get
mainline ATF working. I haven't got time recently to work on
Hi Christoph,
This patch need re-base upon latest mainline tree.
And see below commons.
On 05/07/2019 04:42 PM, Christoph Muellner wrote:
> This commit reduces the SPL size by fixing typos in the removed property
> string list, switching to the tiny versions of printf/memset and
>
Hi Christoph and Mark,
Does this patch ready for rk3399-puma?
Thanks,
- Kever
On 05/07/2019 05:18 PM, Christoph Müllner wrote:
> Hi Mark,
>
> On 07.05.19 10:57, Mark Kettenis wrote:
>>> From: Christoph Muellner
>>> Date: Tue, 7 May 2019 10:39:54 +0200
>>>
>>> This reverts commit
Hi Christoph,
On 05/07/2019 04:37 PM, Christoph Muellner wrote:
> Puma SoMs have a 4 MB SPI NOR flash.
> Therefore we can move the environment to the end of the flash
> (4 MiB - 16 kiB) in order to not overlap with SPL.
>
> Reported-by: Jakob Unterwurzacher
> Signed-off-by: Christoph Muellner
Hi Igor,
On Tue, 28 May 2019 13:35:13 +0300
Igor Opaniuk igor.opan...@gmail.com wrote:
> Hi all,
>
> Just a clarifying question:
> I assume a splash screen functionality from common/splash.c and
> common/splash_source.c is marked as deprecated and is not going to be
> used anymore alongside
in case CONFIG_MULTI_DTB_FIT is set and u-boot-dtb.imx
image is build, currently u-boot-dtb.bin is used for
generating the u-boot-dtb.imx binary, which is wrong, as
it contains only a dtb blob not the fit.blob
Use instead the u-boot-fit-dtb.bin for generating
u-boot-dtb.imx which contains the
Hi Heiko,
On Tue, May 28, 2019 at 1:39 AM Heiko Schocher wrote:
> I would reword the commit message and subject to:
> """
> arm, imx, Makefile: fix u-boot-dtb.imx build in CONFIG_MULTI_DTB_FIT case
>
> in case CONFIG_MULTI_DTB_FIT is set and u-boot-dtb.imx
> image is build, currently
On Tue, May 28, 2019 at 05:24:34AM +0200, Marek Vasut wrote:
> On 5/28/19 5:04 AM, Tom Rini wrote:
> > On Tue, May 28, 2019 at 04:44:52AM +0200, Marek Vasut wrote:
> >> On 5/28/19 4:42 AM, Tom Rini wrote:
> >>> On Tue, May 28, 2019 at 04:07:44AM +0200, Marek Vasut wrote:
> On 5/28/19 4:06 AM,
The PHY reset is now handled by the MAC driver, remove this leftover.
Signed-off-by: Neil Armstrong
---
board/amlogic/q200/q200.c | 6 --
1 file changed, 6 deletions(-)
diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c
index 1932c14aa2..2ea97c362e 100644
---
When using External PHY, reset the mux to use the external PHY in case U-Boot
was chainloaded from a misconfigured bootloader.
Fixes: 33e3378091 ("ARM: meson: rework soc arch file to prepare for new SoC")
Signed-off-by: Neil Armstrong
---
arch/arm/mach-meson/board-gx.c | 17 -
1
Hi Bin,
On Tue, May 28, 2019 at 05:58:47PM +0800, Bin Meng wrote:
> Hi Greentime,
>
> On Tue, May 28, 2019 at 3:54 PM Greentime Hu wrote:
> >
> > Hi Bin,
> > On Fri, May 24, 2019 at 05:40:08PM +0800, Bin Meng wrote:
> > > Hi Eric,
> > >
> > > On Fri, May 24, 2019 at 4:04 PM Eric Lin wrote:
> >
On Tue, 2019-05-28 at 06:51 +0200, Heiko Schocher wrote:
> add Kconfig support for this driver.
>
> Signed-off-by: Heiko Schocher
Acked-by: Martyn Welch
> ---
>
> README| 4
> configs/aristainetos2_defconfig | 1 +
>
Hi Bin,
On Fri, May 24, 2019 at 05:40:08PM +0800, Bin Meng wrote:
> Hi Eric,
>
> On Fri, May 24, 2019 at 4:04 PM Eric Lin wrote:
> >
> > Hi Bin
> >
> > Bin Meng ??? 2019???5???22??? ??
> > ??5:25?
> > >
> > > Hi Eric,
> > >
> > > On Wed, May 22, 2019 at 4:23 PM wrote:
> > > >
Hi all,
Just a clarifying question:
I assume a splash screen functionality from common/splash.c and
common/splash_source.c is marked as deprecated and is not going to be
used anymore alongside with DM_VIDEO enabled, right?
I understand that the same result can be achieved (showing a boot
logo)
On Mon, May 27, 2019 at 5:58 PM Tom Rini wrote:
>
> On Mon, May 27, 2019 at 09:22:05AM +0200, Stefan Agner wrote:
> > On 27.05.2019 07:21, Igor Opaniuk wrote:
> > > Hi everyone,
> > >
> > > I've finally started looking into the cfb_console.c driver and it's
> > > conversion to DM_VIDEO after our
Flushing L3 cache may need variable time depending upon cache line
allocation.
Coming up with a proper timeout value would be best handled by
simulations under multiple scenarios in your actual system.
From the purely HN-F point of view, the flush would take ~15 cycles for
a clean line, and ~22
This patch adds Microchip MPFS Icicle board support.
For now, NS16550 serial driver is only enabled.
The Microchip MPFS Icicle defconfig by default builds
U-Boot for M-Mode with SMP support.
Signed-off-by: Padmarao Begari
Reviewed-by: Bin Meng
---
Changes in V4
- Remove CONFIG_DISTRO_DEFAULTS
From: AKASHI Takahiro
If a user defines BootNext but not BootOrder and loading from BootNext
fails, you will see only a message like this:
BootOrder not defined
This may confuse a user. Adding an error message will be helpful.
Signed-off-by: AKASHI Takahiro
Adjust message for
Hi,
> -Original Message-
> From: Michal Simek [mailto:michal.si...@xilinx.com]
> Sent: Monday, April 1, 2019 4:10 PM
> To: Siva Durga Prasad Paladugu ; Lukasz Majewski
>
> Cc: u-boot@lists.denx.de; ma...@denx.de; jjhib...@ti.com;
> s...@chromium.org; patrick.delau...@st.com
> Subject:
Hi Greentime,
On Tue, May 28, 2019 at 3:54 PM Greentime Hu wrote:
>
> Hi Bin,
> On Fri, May 24, 2019 at 05:40:08PM +0800, Bin Meng wrote:
> > Hi Eric,
> >
> > On Fri, May 24, 2019 at 4:04 PM Eric Lin wrote:
> > >
> > > Hi Bin
> > >
> > > Bin Meng ??? 2019???5???22??? ??
> > >
From: Bartosz Golaszewski
Enable CONFIG_SPL_DM and enable the driver model for serial by defining
an appropriate device in the board file for da850-lcdk.
Signed-off-by: Bartosz Golaszewski
---
board/davinci/da8xxevm/omapl138_lcdk.c | 16
configs/omapl138_lcdk_defconfig
From: Bartosz Golaszewski
We're working towards enabling the driver-model in SPL for da850-lcdk.
Enable CONFIG_USE_TINY_PRINTF in defconfig to reduce SPL size.
Signed-off-by: Bartosz Golaszewski
---
configs/omapl138_lcdk_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git
From: Bartosz Golaszewski
There's no SPI on da850-lcdk. Remove unnecessary includes.
Signed-off-by: Bartosz Golaszewski
---
board/davinci/da8xxevm/omapl138_lcdk.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c
From: Bartosz Golaszewski
We're working towards enabling the driver model in SPL for da850-lcdk.
Enable SPL_SYS_MALLOC_SIMPLE in defconfig to reduce SPL size.
Signed-off-by: Bartosz Golaszewski
---
configs/omapl138_lcdk_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git
From: Bartosz Golaszewski
This series enables the driver model in SPL on omapl138-lcdk. First two
patches enable size-reducing options in defconfig. The third patch is
just a cleanup of the board file. Last patch enables the driver model
and defines the serial device so that we don't have to
From: Eugen Hristev
NAND: BUG at drivers/mtd/nand/raw/nand_base.c:4361/nand_scan_tail()!
This board has a NAND flash enabled, and it requires the HW PMECC in order
to correctly probe this flash.
In the NAND flash configuration , this is selected by the GENERATE_PMECC_HEADER
which is not needed
From: Rick Chen
Use CCTL command to do d-cache write back and invalidate
instead of fence.
Signed-off-by: Rick Chen
Cc: Greentime Hu
---
arch/riscv/cpu/ax25/cache.c | 22 +-
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/riscv/cpu/ax25/cache.c
From: Rick Chen
Flush and disable cache in cleanup_before_linux()
which will be called before jump to linux.
The sequence will be preferred as below:
L1 flush -> L1 disable -> L2 flush -> L2 disable
Signed-off-by: Rick Chen
Cc: Greentime Hu
---
arch/riscv/cpu/ax25/cpu.c | 4
1 file
From: Rick Chen
When L2 node exists inside cpus node, uclass_get_device
can not parse L2 node successfully. So move it outside
from cpus node.
Also add tag-ram-ctl and data-ram-ctl attributes for
v5l2 cache controller driver. This can adjust timing
by requirement from dtb to improve
From: Rick Chen
Add a v5l2 cache controller driver that is usually found on
Andes RISC-V ae350 platform. It will parse the cache settings
from the dtb.
In this version tag and data ram control timing can be adjusted
by the requirement from the dtb.
Signed-off-by: Rick Chen
Cc: Greentime Hu
From: Rick Chen
Select the v5l2 UCLASS_CACHE driver for AE350.
Signed-off-by: Rick Chen
Cc: Greentime Hu
---
board/AndesTech/ax25-ae350/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/AndesTech/ax25-ae350/Kconfig
b/board/AndesTech/ax25-ae350/Kconfig
index 5e682b6..dd299d9
From: Rick Chen
Find the UCLASS_CACHE driver to configure the cache controller's
settings.
Signed-off-by: Rick Chen
Cc: Greentime Hu
---
board/AndesTech/ax25-ae350/ax25-ae350.c | 15 +++
1 file changed, 15 insertions(+)
diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c
From: Rick Chen
Add a v5l2 cache controller driver that is usually found on
Andes RISC-V ae350 platform. It will parse and configure the
cache settings (data & instruction prefetch, data & tag latency)
from the device tree blob.
Also implement L2 cache flush and disable before jump to linux.
The following DT nodes in the process on review for Linux 5.3,
until Linux 5.3 is tagged, add the missing DT nodes in u-boot specific
DTSI files that will be dropped when the v5.3-rc1 DT is synced again.
Signed-off-by: Neil Armstrong
---
arch/arm/dts/meson-g12a-u-boot.dtsi | 216
The G12A PCIE PLL clock was introduced in Linux 5.2-rc1, and is needed
for USB to operate, add basic support for it and associated gates.
Signed-off-by: Neil Armstrong
---
drivers/clk/meson/g12a.c | 103 +++
1 file changed, 103 insertions(+)
diff --git
Sync from Linux commit a188339ca5a3 ("Linux 5.2-rc1")
Signed-off-by: Neil Armstrong
---
arch/arm/dts/meson-g12a-u200.dts | 147 ++
arch/arm/dts/meson-g12a.dtsi | 465 ++
include/dt-bindings/clock/g12a-aoclkc.h | 2 +
This patchset :
- Syncs the G12A DT from v5.2-rc1
- Add support for the G12A PCIE PLL, introduced in v5.2-rc1
- Add missing DT to fill the gaps, that will be synced in Linux 5.3-rc1
Neil Armstrong (3):
ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1
clk: meson-g12a: Add PCIE PLL support
Hi Simon:
On 2019/5/23 上午3:39, Simon Glass wrote:
Hi Andy,
On Tue, 21 May 2019 at 19:43, Andy Yan wrote:
Hi Andre:
Andre Przywara 于2019年5月20日周一 下午11:59写道:
On Mon, 20 May 2019 14:34:01 +0800
Andy Yan wrote:
Hi,
On 2019/5/19 上午12:26, Simon Glass wrote:
Hi Andy,
Instead of this could
Hi Simon:
On 2019/5/23 上午3:39, Simon Glass wrote:
Hi Andy,
On Tue, 21 May 2019 at 19:56, Andy Yan wrote:
Hi Simon:
Simon Glass 于2019年5月22日周三 上午8:28写道:
Hi Andy,
On Tue, 21 May 2019 at 00:51, Andy Yan wrote:
Hi Simon:
On 2019/5/20 下午11:35, Simon Glass wrote:
Hi Andy,
On Mon, 20 May
On 24. 05. 19 15:40, Luca Ceresoli wrote:
> Avnet UltraZed-EV Starter Kit is composed by the UltraZed-EV SoM and the
> only publicly-available compatible carrier card. The SoM is based on the EV
> version of the Xilinx ZynqMP SoC+FPGA.
>
> The psu_init_gpl.c file has been generated from the board
On 24. 05. 19 15:40, Luca Ceresoli wrote:
> This script transforms a pair of psu_init_gpl.c and .h files produced by
> the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that
> is almost checkpatch compliant.
>
> Based on a script by Michal Simek.
>
> Signed-off-by: Luca
On 24. 05. 19 15:40, Luca Ceresoli wrote:
> Fixes sparse warnings when building zynqmp defconfigs:
> ./board/xilinx/zynqmp/xil_io.h:12:6: warning: symbol 'Xil_Out32' was not
> declared. Should it be static?
> ./board/xilinx/zynqmp/xil_io.h:17:5: warning: symbol 'Xil_In32' was not
> declared.
On Tue, May 28, 2019 at 08:16:37AM +0200, Heinrich Schuchardt wrote:
> On 5/24/19 8:59 AM, AKASHI Takahiro wrote:
> >If a user defines BootNext but not BootOrder and loading from BootNext
> >fails, you will see only a message like this:
> > BootOrder not defined
> >
> >This may confuse a user.
On 5/24/19 8:59 AM, AKASHI Takahiro wrote:
If a user defines BootNext but not BootOrder and loading from BootNext
fails, you will see only a message like this:
BootOrder not defined
This may confuse a user. Adding an error message will be helpful.
Signed-off-by: AKASHI Takahiro
---
With commit 06985289d452 ("watchdog: Implement generic watchdog_reset()
version") the init sequence has changed in arch_misc_init(), resulting
in a re-appearance of the d-cache issue on MT7688 boards (e.g. gardena).
When this happens, the first (or sometimes later ones as well) TFTP
command hangs
97 matches
Mail list logo