On Thu, Nov 28, 2019 at 8:31 AM Ley Foon Tan wrote:
>
> On Thu, Nov 28, 2019 at 3:21 PM Ley Foon Tan wrote:
> >
> > On Wed, Nov 27, 2019 at 6:24 PM Simon Goldschmidt
> > wrote:
> > >
> > > On Wed, Nov 27, 2019 at 8:56 AM Ley Foon Tan
> > > wrote:
> > > >
> > > > Add device tree files for Agile
On Thu, Nov 28, 2019 at 3:28 PM Simon Goldschmidt
wrote:
>
> On Thu, Nov 28, 2019 at 8:22 AM Ley Foon Tan wrote:
> >
> > On Wed, Nov 27, 2019 at 6:24 PM Simon Goldschmidt
> > wrote:
> > >
> > > On Wed, Nov 27, 2019 at 8:56 AM Ley Foon Tan
> > > wrote:
> > > >
> > > > Add device tree files for
On Thu, Nov 28, 2019 at 3:21 PM Ley Foon Tan wrote:
>
> On Wed, Nov 27, 2019 at 6:24 PM Simon Goldschmidt
> wrote:
> >
> > On Wed, Nov 27, 2019 at 8:56 AM Ley Foon Tan wrote:
> > >
> > > Add device tree files for Agilex SoC platform.
> > >
> > > socfpga_agilex-u-boot.dtsi and socfpga_agilex_socd
On Thu, Nov 28, 2019 at 8:22 AM Ley Foon Tan wrote:
>
> On Wed, Nov 27, 2019 at 6:24 PM Simon Goldschmidt
> wrote:
> >
> > On Wed, Nov 27, 2019 at 8:56 AM Ley Foon Tan wrote:
> > >
> > > Add device tree files for Agilex SoC platform.
> > >
> > > socfpga_agilex-u-boot.dtsi and socfpga_agilex_socd
On Wed, Nov 27, 2019 at 6:24 PM Simon Goldschmidt
wrote:
>
> On Wed, Nov 27, 2019 at 8:56 AM Ley Foon Tan wrote:
> >
> > Add device tree files for Agilex SoC platform.
> >
> > socfpga_agilex-u-boot.dtsi and socfpga_agilex_socdk-u-boot.dts contains
> > Uboot specific DT properties.
> >
> > socfpga
On 11/27/19 8:45 PM, Cristian Ciocaltea wrote:
On Tue, Nov 26, 2019 at 07:31:39PM +0100, Heinrich Schuchardt wrote:
On 11/24/19 9:11 PM, Cristian Ciocaltea wrote:
Currently the only way to run an EFI binary like GRUB2 is via the
'bootefi' command, which cannot be used in a verified boot scenari
On 11/26/19 6:07 PM, Marek Vasut wrote:
On 11/26/19 5:52 PM, Tom Rini wrote:
On Tue, Nov 26, 2019 at 05:47:48PM +0100, Marek Vasut wrote:
On 11/26/19 5:26 PM, Tom Rini wrote:
On Tue, Nov 26, 2019 at 09:11:51AM +0100, Marek Vasut wrote:
On 11/26/19 12:16 AM, Heinrich Schuchardt wrote:
Dear ma
Rockpro64 doesn't boot reliably after soft reset, so let's force power on
reset by asserting sysreset pin if we detected soft reset.
Signed-off-by: Vasily Khoruzhick
---
arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 8
configs/rockpro64-rk3399_defconfig| 1 +
2 files changed, 9 in
Currently code doesn't even compile since it uses wrong
define for ifdef. Fix that and also add missing include
Fixes: 07586ee4322a ("rockchip: rk3399: Support common spl_board_init")
Signed-off-by: Vasily Khoruzhick
---
arch/arm/mach-rockchip/rk3399/rk3399.c | 5 +++--
1 file changed, 3 inserti
Hi Lukasz,
On Wed, Nov 27, 2019 at 9:47 PM Lukasz Majewski wrote:
>
> Hi Jagan,
>
> > Hi Lukasz,
> >
> > On Wed, Nov 27, 2019 at 4:15 PM Lukasz Majewski wrote:
> > >
> > > Hi Jagan,
> > >
> > > > Hi,
> > > >
> > > > I have created GPT table start from 8MB for kernel, roots etc.
> > > > something
On Thu, Jun 20, 2019 at 11:57 AM Jagan Teki wrote:
>
> Support common spl_board_init by moving code from puma
> board file into, common rk3399-board-spl.c.
>
> Part of the code has sysreset-gpio, regulators_enable_boot_on
> but right now only puma board is using this with relevant
> config options
enable ls1028ardb ugreen usb network card AX88179 and AX8817X driver
Signed-off-by: Yinbo Zhu
---
configs/ls1028ardb_tfa_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 0664014..fc6d2ec 100644
--- a/configs
Hi Simon,
On Thu, Nov 28, 2019 at 11:19 AM Simon Glass wrote:
>
> Hi Bin,
>
> On Wed, 27 Nov 2019 at 20:08, Bin Meng wrote:
> >
> > Hi Simon,
> >
> > On Thu, Nov 28, 2019 at 10:23 AM Simon Glass wrote:
> > >
> > > Hi Bin,
> > >
> > > On Wed, 27 Nov 2019 at 00:16, Bin Meng wrote:
> > > >
> > >
Hi Bin,
On Wed, 27 Nov 2019 at 20:08, Bin Meng wrote:
>
> Hi Simon,
>
> On Thu, Nov 28, 2019 at 10:23 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Wed, 27 Nov 2019 at 00:16, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
> > > >
> > >
Hi Tom, Simon,
Is there anything I need to update for this patch?
Thanks,
- Kever
Kever Yang 于2019年8月15日周四 下午4:32写道:
> The partition driver has its Kconfig option, and the part_get_info_prt()
> interface are mendatory interface for partition drivers, always enable the
> macro to make partiti
Hi Simon,
On Thu, Nov 28, 2019 at 10:23 AM Simon Glass wrote:
>
> Hi Bin,
>
> On Wed, 27 Nov 2019 at 00:16, Bin Meng wrote:
> >
> > Hi Simon,
> >
> > On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
> > >
> > > Apollo Lake (APL) only supports hardware sequencing. Add support for this
> > > i
Hi Tom, Simon
ping...
Is it OK to merge this patch?
Thanks
- Kever
Kever Yang 于2019年8月15日周四 下午4:32写道:
> The SPL disk driver can not depends on SPL_FRAMEWORK & PARTITIONS, which
> will enable the disk driver when we actually not need it. Use a separate
> Kconfig to control the partition driv
Hi Simon,
On Thu, Nov 28, 2019 at 10:22 AM Simon Glass wrote:
>
> HI Bin,
>
> On Tue, 26 Nov 2019 at 23:11, Bin Meng wrote:
> >
> > Hi Simon,
> >
> > On Wed, Nov 27, 2019 at 1:08 AM Simon Glass wrote:
> > >
> > > Hi Bin,
> > >
> > > On Tue, 26 Nov 2019 at 01:36, Bin Meng wrote:
> > > >
> > > >
>-Original Message-
>From: Stefan Roese
>Sent: 2019年11月27日 18:31
>To: Peng Ma ; Priyanka Jain ;
>w...@denx.de; Ruchika Gupta ; Shengzhou Liu
>
>Cc: Yinbo Zhu ; Z.q. Hou ;
>s...@chromium.org; ja...@openedev.com; andre.przyw...@arm.com;
>sm...@web.de; Andy Tang ; u-boot@lists.denx.de
>Subj
>-Original Message-
>From: Wolfgang Denk
>Sent: 2019年11月28日 0:08
>To: Peng Ma
>Cc: Priyanka Jain ; Ruchika Gupta
>; Shengzhou Liu ; Yinbo
>Zhu ; Z.q. Hou ;
>s...@chromium.org; ja...@openedev.com; andre.przyw...@arm.com;
>s...@denx.de; sm...@web.de; Andy Tang ;
>u-boot@lists.denx.de
>Sub
>-Original Message-
>From: Stefan Roese
>Sent: 2019年11月27日 18:31
>To: Peng Ma ; Priyanka Jain ;
>w...@denx.de; Ruchika Gupta ; Shengzhou Liu
>
>Cc: Yinbo Zhu ; Z.q. Hou ;
>s...@chromium.org; ja...@openedev.com; andre.przyw...@arm.com;
>sm...@web.de; Andy Tang ; u-boot@lists.denx.de
>Subj
Hi Bin,
On Wed, 27 Nov 2019 at 00:16, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
> >
> > In TPL we want to reduce code size and support running with CONFIG_PCI
> > disabled. Add special code to handle this using a fixed BAR programmed
> > into the SPI o
Hi Bin,
On Wed, 27 Nov 2019 at 02:08, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
> >
> > If these phases are used we typically want to enable pinctrl in then, so
> > that pad setup and GPIO access are possible.
> >
> > Signed-off-by: Simon Glass
> > --
Hi Bin,
On Wed, 27 Nov 2019 at 00:16, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
> >
> > This incorrectly shortens read operations if there is a maximum write size
> > but no maximum read size. Fix it.
> >
> > Signed-off-by: Simon Glass
> > ---
> >
> >
Hi Bin,
On Wed, 27 Nov 2019 at 00:16, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
> >
> > Apollo Lake (APL) only supports hardware sequencing. Add support for this
> > into the SPI driver, as an option.
> >
> > Signed-off-by: Simon Glass
> >
> > ---
> >
HI Bin,
On Tue, 26 Nov 2019 at 23:11, Bin Meng wrote:
>
> Hi Simon,
>
> On Wed, Nov 27, 2019 at 1:08 AM Simon Glass wrote:
> >
> > Hi Bin,
> >
> > On Tue, 26 Nov 2019 at 01:36, Bin Meng wrote:
> > >
> > > Hi Simon,
> > >
> > > On Mon, Nov 25, 2019 at 12:11 PM Simon Glass wrote:
> > > >
> > > >
Hi Tom,
Please pull mmc-11-27-2019
CI: https://travis-ci.org/MrVan/u-boot/builds/617615361
--
fsl_esdhc update and some cleanup in ls1021a/mpc83xx code
mmc tmio sdhi update for hs400
--
Thanks,
Peng.
The following changes since commit 4b19b89ca4a8
On Thu, Nov 28, 2019 at 4:33 AM Simon Goldschmidt
wrote:
>
> Ley, Tom,
>
> Am 26.11.2019 um 10:26 schrieb Ley Foon Tan:
> > On Fri, Nov 8, 2019 at 10:53 AM Ley Foon Tan wrote:
> >>
> >> Add an option for building cache drivers in SPL.
>
> Ley:
>
> What's the actual problem here? Can you further d
On Tue, Nov 19, 2019 at 12:04:02PM +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner
>
> As part of loading trustedfirmware, the SPL is required to place portions
> of code into the socs sram but the mmc controllers can only do dma
> transfers into the regular memory, not sram.
>
> The results
On Wed, Nov 27, 2019 at 09:33:19PM +0100, Simon Goldschmidt wrote:
> Ley, Tom,
>
> Am 26.11.2019 um 10:26 schrieb Ley Foon Tan:
> > On Fri, Nov 8, 2019 at 10:53 AM Ley Foon Tan wrote:
> > >
> > > Add an option for building cache drivers in SPL.
>
> Ley:
>
> What's the actual problem here? Can
Am 2019-11-27 16:19, schrieb Alex Marginean:
Hardware comes out of reset with implicit values, but these are outside
the accepted range for Layerscape gen 3 chassis spec used on LS1028A.
Allocate different IDs and fix up Linux DT to use them.
Signed-off-by: Alex Marginean
Reviewed-by: Bin Meng
Ley, Tom,
Am 26.11.2019 um 10:26 schrieb Ley Foon Tan:
On Fri, Nov 8, 2019 at 10:53 AM Ley Foon Tan wrote:
Add an option for building cache drivers in SPL.
Ley:
What's the actual problem here? Can you further describe your change?
Why do you need to change drivers/cache/Makefile? That see
Hi Pramod,
On 11/25/2019 11:42 AM, Pramod Kumar wrote:
LS1044A, LS1048A are LS1088A personalities, which support only one
1x 10GE port.
There's probably a mix-up, and unfortunately we have an issue in the
LS1088A reference manual available on the website too.
- LS1088A is documented as 2x 1
On Wed, Nov 27, 2019 at 1:58 PM Romain Naour wrote:
>
> Hello,
>
> I'm working on a modular socfpga based system with several optional boards.
> Each optional board contain a board ID that can be read through a SPI bus.
>
> Since we want just read the board ID, we used manually the sspi command,
>
On Tue, Nov 26, 2019 at 07:31:39PM +0100, Heinrich Schuchardt wrote:
> On 11/24/19 9:11 PM, Cristian Ciocaltea wrote:
> > Currently the only way to run an EFI binary like GRUB2 is via the
> > 'bootefi' command, which cannot be used in a verified boot scenario.
> >
> > The obvious solution to this
On 26/11/19 23:38, Fabio Estevam wrote:
> Hi Stefano,
>
> On Mon, Oct 21, 2019 at 11:23 AM Fabio Estevam wrote:
>>
>> U-Boot binary has grown in such a way that it goes beyond the reserved
>> area for the environment variables.
>>
>> Running "saveenv" followed by a "reset" causes U-Boot to hang
On Wed, Nov 27, 2019 at 8:56 AM Ley Foon Tan wrote:
>
> Move Stratix10 and Agilex common CONFIGs to socfpga_soc64_common.h.
>
> Signed-off-by: Ley Foon Tan
Reviewed-by: Simon Goldschmidt
> ---
> ...ratix10_socdk.h => socfpga_soc64_common.h} | 8 +-
> include/configs/socfpga_stratix10_socdk.
Hi Sam,
On Wed, Oct 23, 2019 at 05:34:22PM +0300, Sam Protsenko wrote:
> +static int do_bootimg_get_dtb_file(cmd_tbl_t *cmdtp, int flag, int argc,
> +char * const argv[])
> +{
> + char *endp;
> + char buf[65];
> + u32 index;
> + ulong addr;
> + u
On Wed, Nov 27, 2019 at 9:53 AM Jagan Teki wrote:
>
> Hi,
>
> On Mon, Nov 25, 2019 at 10:56 PM Vasily Khoruzhick wrote:
> >
> > Hey guys,
> >
> > Looks like reboot is broken on RockPro64 (RK3399-based) with mainline
> > u-boot and ATF (ATF already has a fix [1]).
> >
> > When I type 'reboot' in l
Some of our t1042 boards fails DDR init with an Automatic calibration error
every now and then. Investigations revealed that true Warm boots
newer failed. Warm boots has some extra steps performed, one being
to start DDRC in Self Refresh and then clearing SR right after.
Applying this SR method unc
Hi,
On Mon, Nov 25, 2019 at 10:56 PM Vasily Khoruzhick wrote:
>
> Hey guys,
>
> Looks like reboot is broken on RockPro64 (RK3399-based) with mainline
> u-boot and ATF (ATF already has a fix [1]).
>
> When I type 'reboot' in linux I get back to u-boot, but subsequent
> linux boot hangs in most cas
On Mon, Nov 25, 2019 at 9:25 AM Vasily Khoruzhick wrote:
>
> Hey guys,
>
> Looks like reboot is broken on RockPro64 (RK3399-based) with mainline
> u-boot and ATF (ATF already has a fix [1]).
Added Philipp and Simon to CC.
Can anyone please help me with this issue?
> When I type 'reboot' in linu
On Wed, 27 Nov 2019 18:45:43 +0200
Andy Shevchenko wrote:
> On Wed, Nov 27, 2019 at 05:10:22PM +0100, Lukasz Majewski wrote:
> > > On Wed, Nov 27, 2019 at 11:57:53AM +0100, Lukasz Majewski wrote:
>
> > > I base my patches on official releases / release candidates. It
> > > applies very well on
On Wed, Nov 27, 2019 at 05:10:22PM +0100, Lukasz Majewski wrote:
> > On Wed, Nov 27, 2019 at 11:57:53AM +0100, Lukasz Majewski wrote:
> > I base my patches on official releases / release candidates. It
> > applies very well on top of 2020.01-rc3 as of today. Does DFU has a
> > separate repository
From: Matthias Brugger
The bcm283x has grown in files, which was not reflected in the
MAINTAINERS file. Fix this by adding the missing entries.
Signed-off-by: Matthias Brugger
---
MAINTAINERS | 3 +++
1 file changed, 3 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 332fd9d74c..8
Hi Jagan,
> Hi Lukasz,
>
> On Wed, Nov 27, 2019 at 4:15 PM Lukasz Majewski wrote:
> >
> > Hi Jagan,
> >
> > > Hi,
> > >
> > > I have created GPT table start from 8MB for kernel, roots etc.
> > > something like
> > >
> > > PartStart LBA End LBA Name
> > > Attributes
>
The stock U-Boot on Intel Edison has timeout parameter for DFU command.
Enable it here to be compatible with the original U-Boot configuration.
Signed-off-by: Andy Shevchenko
---
v2:
- rebase on top of origin/master as of today (Lukasz)
configs/edison_defconfig | 1 +
1 file changed, 1 insertion
After the commit 1cc03c5c53c0 ("dfu: Provide means to find difference between
dfu-util -e and -R") the dangling ptototype appeared. Remove it here.
Fixes: 1cc03c5c53c0 ("dfu: Provide means to find difference between dfu-util -e
and -R")
Cc: Lukasz Majewski
Cc: Stephen Warren
Signed-off-by: Andy
When the `dfu` command is called from the U-Boot environment,
it now accepts an optional parameter that specifies a timeout (in seconds).
If a DFU connection is not made within that time the `dfu` command exits
(as it would if Ctrl+C was pressed). If the timeout is left empty or being
zero the `dfu
In the future we may utilize optional argument in 'dfu' command line.
As a preparation for this, refactor do_dfu().
Signed-off-by: Andy Shevchenko
Acked-by: Lukasz Majewski
---
cmd/dfu.c | 17 ++---
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/cmd/dfu.c b/cmd/dfu.c
Hi Andy,
> On Wed, Nov 27, 2019 at 11:57:53AM +0100, Lukasz Majewski wrote:
> > Hi Andy,
> >
> > > The stock U-Boot on Intel Edison has timeout parameter for DFU
> > > command. Enable it here to be compatible with the original U-Boot
> > > configuration.
> > >
> > > Signed-off-by: Andy Shevche
Dear Peng Ma,
In message <20191127100145.44346-1-peng...@nxp.com> you wrote:
> This reverts commit 856b9cdb53f0e6c8d98f81cf71ef363c16b0aa0e.
>
> Signed-off-by: Peng Ma
Why?
A commit message should always explain why such an action is taking
place.
Best regards,
Wolfgang Denk
--
DENX Softwar
On 11/27/19 4:40 PM, Claudius Heine wrote:
> On 27/11/2019 16.21, Marek Vasut wrote:
>> On 11/27/19 4:17 PM, Claudius Heine wrote:
>>> On 27/11/2019 16.12, Marek Vasut wrote:
On 11/27/19 4:09 PM, Claudius Heine wrote:
> Hi Marek,
>
> On 27/11/2019 15.47, Marek Vasut wrote:
>> O
Hi Lukasz,
On Wed, Nov 27, 2019 at 4:15 PM Lukasz Majewski wrote:
>
> Hi Jagan,
>
> > Hi,
> >
> > I have created GPT table start from 8MB for kernel, roots etc.
> > something like
> >
> > PartStart LBA End LBA Name
> > Attributes
> > Type GUID
> > Partiti
On 27/11/2019 16.21, Marek Vasut wrote:
> On 11/27/19 4:17 PM, Claudius Heine wrote:
>> On 27/11/2019 16.12, Marek Vasut wrote:
>>> On 11/27/19 4:09 PM, Claudius Heine wrote:
Hi Marek,
On 27/11/2019 15.47, Marek Vasut wrote:
> On 11/27/19 3:20 PM, Claudius Heine wrote:
>> In
On Wed, Nov 27, 2019 at 05:21:32PM +0200, Andy Shevchenko wrote:
> On Wed, Nov 27, 2019 at 11:57:53AM +0100, Lukasz Majewski wrote:
> > Hi Andy,
> >
> > > The stock U-Boot on Intel Edison has timeout parameter for DFU
> > > command. Enable it here to be compatible with the original U-Boot
> > > co
On 11/27/19 4:17 PM, Claudius Heine wrote:
> On 27/11/2019 16.12, Marek Vasut wrote:
>> On 11/27/19 4:09 PM, Claudius Heine wrote:
>>> Hi Marek,
>>>
>>> On 27/11/2019 15.47, Marek Vasut wrote:
On 11/27/19 3:20 PM, Claudius Heine wrote:
> In case CONFIG_SYSRESET is set, do_reset from reset.
On Wed, Nov 27, 2019 at 11:57:53AM +0100, Lukasz Majewski wrote:
> Hi Andy,
>
> > The stock U-Boot on Intel Edison has timeout parameter for DFU
> > command. Enable it here to be compatible with the original U-Boot
> > configuration.
> >
> > Signed-off-by: Andy Shevchenko
> > ---
> > configs/ed
Hardware comes out of reset with implicit values, but these are outside
the accepted range for Layerscape gen 3 chassis spec used on LS1028A.
Allocate different IDs and fix up Linux DT to use them.
Signed-off-by: Alex Marginean
Reviewed-by: Bin Meng
---
Changes in v2:
- moved code under arm/cp
On 27/11/2019 16.12, Marek Vasut wrote:
> On 11/27/19 4:09 PM, Claudius Heine wrote:
>> Hi Marek,
>>
>> On 27/11/2019 15.47, Marek Vasut wrote:
>>> On 11/27/19 3:20 PM, Claudius Heine wrote:
In case CONFIG_SYSRESET is set, do_reset from reset.c will not be available
anywere, even if SYSRE
On 11/27/19 4:09 PM, Claudius Heine wrote:
> Hi Marek,
>
> On 27/11/2019 15.47, Marek Vasut wrote:
>> On 11/27/19 3:20 PM, Claudius Heine wrote:
>>> In case CONFIG_SYSRESET is set, do_reset from reset.c will not be available
>>> anywere, even if SYSRESET is disabled for SPL in the board specific h
Hi Marek,
On 27/11/2019 15.47, Marek Vasut wrote:
> On 11/27/19 3:20 PM, Claudius Heine wrote:
>> In case CONFIG_SYSRESET is set, do_reset from reset.c will not be available
>> anywere, even if SYSRESET is disabled for SPL in the board specific header
>> file like this:
>>
>> #if defined(CONFI
Hi Andy,
> On Wed, Nov 27, 2019 at 11:56:15AM +0100, Lukasz Majewski wrote:
>
> > Thank you for your work on enhancing DFU. The patch series is
> > generally Ok.
> >
> > Please find some minor comments/requests below.
>
> Thank you for review, my answers below.
>
> > > +#ifdef CONFIG_DFU_TIM
On 11/27/19 3:20 PM, Claudius Heine wrote:
> In case CONFIG_SYSRESET is set, do_reset from reset.c will not be available
> anywere, even if SYSRESET is disabled for SPL in the board specific header
> file like this:
>
> #if defined(CONFIG_SPL_BUILD)
> #undef CONFIG_WDT
> #undef CONFIG_
Hi Michael,
On 11/27/2019 3:33 PM, Michael Walle wrote:
Hi Alex,
Am 2019-11-27 14:57, schrieb Alex Marginean:
Hardware comes out of reset with implicit values, but these are outside
the accepted range for Layerscape gen 3 chassis spec used on LS1028A.
Allocate different IDs and fix up Linux DT
Hi Neil,
On Wed, 27 Nov 2019 at 18:25, Neil Armstrong wrote:
>
> Hi,
>
> On 26/11/2019 22:12, Anand Moon wrote:
> > Add missing config option CONFIG_MESON_GXBB and CONFIG_SYS_BOARD,
> > for odroid-c2 and nanopi k2 board
> >
> > Signed-off-by: Anand Moon
> > ---
> > configs/nanopi-k2_defconfig |
Hi Neil,
On Wed, 27 Nov 2019 at 18:30, Neil Armstrong wrote:
>
> Hi,
>
> On 26/11/2019 22:12, Anand Moon wrote:
> > odroid n2 eMMC module would failed to boot up,
> > because of TX phase clk failure, fix the typo in
> > TX phase macro to help tune correct clk freqency.
> >
> > Before these change
Le lun. 25 nov. 2019 à 17:20, Igor Opaniuk a
écrit :
> + Alex Deymo
>
> Hi Zdenek
>
> On Mon, Nov 25, 2019 at 6:05 PM zdenek.bou...@siemens.com
> wrote:
> >
> > Hello,
> >
> > SPDX-License-Identifier: BSD-3-Clause might be wrong in the following 4
> files from Android Open Source Project (AOSP):
On Wed, Nov 27, 2019 at 11:56:15AM +0100, Lukasz Majewski wrote:
> Thank you for your work on enhancing DFU. The patch series is generally
> Ok.
>
> Please find some minor comments/requests below.
Thank you for review, my answers below.
> > +#ifdef CONFIG_DFU_TIMEOUT
> > + dfu_set_timeout(val
Hi Alex,
Am 2019-11-27 14:57, schrieb Alex Marginean:
Hardware comes out of reset with implicit values, but these are outside
the accepted range for Layerscape gen 3 chassis spec used on LS1028A.
Allocate different IDs and fix up Linux DT to use them.
Signed-off-by: Alex Marginean
---
arch/ar
On 27.11.19 15:23, Tom Rini wrote:
> There are currently no known users of this functionality on this
> platform, disable it to prepare for additional VxWorks functionality
> that would cause this platform to fail to link.
>
> Cc: Soeren Moch
> Signed-off-by: Tom Rini
Acked-by: Soeren Moch
Than
There are currently no known users of this functionality on this
platform, disable it to prepare for additional VxWorks functionality
that would cause this platform to fail to link.
Cc: Soeren Moch
Signed-off-by: Tom Rini
---
configs/tbs2910_defconfig | 1 +
1 file changed, 1 insertion(+)
diff
In case CONFIG_SYSRESET is set, do_reset from reset.c will not be available
anywere, even if SYSRESET is disabled for SPL in the board specific header
file like this:
#if defined(CONFIG_SPL_BUILD)
#undef CONFIG_WDT
#undef CONFIG_WATCHDOG
#undef CONFIG_SYSRESET
#define CONFIG_HW
On Wed, Nov 27, 2019 at 02:34:14PM +0100, Soeren Moch wrote:
> On 27.11.19 13:55, Tom Rini wrote:
> > On Wed, Nov 27, 2019 at 02:03:03PM +0800, Bin Meng wrote:
> >> Hi Tom,
> >>
> >> On Wed, Nov 20, 2019 at 10:22 PM Tom Rini wrote:
> >>> On Wed, Nov 20, 2019 at 10:11:00AM +0800, Bin Meng wrote:
>
On Wed, Nov 27, 2019 at 9:58 PM Alex Marginean
wrote:
>
> Hardware comes out of reset with implicit values, but these are outside
> the accepted range for Layerscape gen 3 chassis spec used on LS1028A.
> Allocate different IDs and fix up Linux DT to use them.
>
> Signed-off-by: Alex Marginean
> -
Hardware comes out of reset with implicit values, but these are outside
the accepted range for Layerscape gen 3 chassis spec used on LS1028A.
Allocate different IDs and fix up Linux DT to use them.
Signed-off-by: Alex Marginean
---
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 9 ++
.../asm/
Hi Tom
Please pull the STM32 related patches for u-boot-stm32-20191126
With the following changes:
- Solve warning for stih410-b2260
- Device tree alignment on v5.4-rc4 for all stm32 boards
- Correct the eMMC pin configuration on stm32mp157c-ev1
- Add DFU and SPI-NAND support for stm32mp1 board
Hi,
> From: Patrick DELAUNAY
> Sent: lundi 14 octobre 2019 09:28
>
> Add read for OTP and PMIC NVM with alternates on virtual DFU device.
>
> Serie-cc: Boris Brezillon
> Signed-off-by: Patrick Delaunay
> ---
Applied to u-boot-stm32/master, thanks!
--
Patrick
___
Hi,
> From: Patrick DELAUNAY
> Sent: lundi 14 octobre 2019 09:28
>
> This patch adds the support of the spi nand device in mtdparts command and in
> dfu_alt_info.
>
> Signed-off-by: Patrick Delaunay
> ---
Applied to u-boot-stm32/master, thanks!
--
Patrick
___
Hi,
> From: Patrick DELAUNAY
> Sent: lundi 14 octobre 2019 09:28
>
> Activate the support of SPI NAND in stm32mp1 U-Boot.
>
> Signed-off-by: Patrick Delaunay
> ---
Applied to u-boot-stm32/master, thanks!
--
Patrick
___
U-Boot mailing list
U-Boot@l
Hi,
> From: Patrick DELAUNAY
> Sent: lundi 14 octobre 2019 09:28
>
> Generate automatically dfu_alt_info for the supported device.
> The simple command "dfu 0" allows to start the dfu stack on usb 0 for the
> supported devices:
> - dfu mtd for nand0
> - dfu mtd for nor0
> - dfu mmc for SDCard
>
Hi,
> From: Patrick DELAUNAY
> Sent: lundi 14 octobre 2019 09:28
>
> Add support of DFU for MMC, MTD, RAM and MTD command.
>
> Signed-off-by: Patrick Delaunay
> ---
Applied to u-boot-stm32/master, thanks!
--
Patrick
___
U-Boot mailing list
U-Boot@
Hi
> From: Patrick DELAUNAY
> Sent: mercredi 6 novembre 2019 16:17
>
> Update the sdmmc2 node for eMMC support on eval board stm32mp157c-ev1.
> - update slew-rate for pin configuration
> - update "vqmmc-supply"
> - remove "st,sig-dir"
> - add mandatory "pinctrl-names"
> - add "mmc-ddr-3_3v"
>
>
Hi,
> From: Patrick DELAUNAY
> Sent: mercredi 6 novembre 2019 16:17
>
> Device tree and binding alignment with kernel v5.4-rc4
>
> Signed-off-by: Patrick Delaunay
> ---
Applied to u-boot-stm32/master, thanks!
--
Patrick
___
U-Boot mailing list
U-B
Hi,
> From: Patrick DELAUNAY
> Sent: mercredi 6 novembre 2019 16:17
>
> Device tree and binding alignment with kernel v5.3 and converted to SPDX.
>
> Signed-off-by: Patrick Delaunay
> ---
Applied to u-boot-stm32/master, thanks!
--
Patrick
___
U-Bo
Hi
> From: Patrice CHOTARD
> Sent: vendredi 15 novembre 2019 11:57
>
> This patch allows to fix the following compilation warning:
>
> = WARNING == This board
> does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please
> update the board to u
Hi
On 27.11.2019 04:13, AKASHI Takahiro wrote:
> # I still need to understand the issues reported here.
>
> On Tue, Nov 26, 2019 at 11:57:34AM -0500, Tom Rini wrote:
>> On Tue, Nov 26, 2019 at 09:15:08AM +0100, Marek Szyprowski wrote:
>>
>>> Handling of the start file offset was broken in the curr
On 27.11.19 13:55, Tom Rini wrote:
> On Wed, Nov 27, 2019 at 02:03:03PM +0800, Bin Meng wrote:
>> Hi Tom,
>>
>> On Wed, Nov 20, 2019 at 10:22 PM Tom Rini wrote:
>>> On Wed, Nov 20, 2019 at 10:11:00AM +0800, Bin Meng wrote:
Hi Tom,
On Fri, Nov 15, 2019 at 4:21 PM Bin Meng wrote:
>>>
Hi,
On 26/11/2019 22:12, Anand Moon wrote:
> odroid n2 eMMC module would failed to boot up,
> because of TX phase clk failure, fix the typo in
> TX phase macro to help tune correct clk freqency.
>
> Before these changes.
> clock is enabled (380953Hz)
> clock is enabled (2500Hz)
> after th
Hello,
I'm working on a modular socfpga based system with several optional boards.
Each optional board contain a board ID that can be read through a SPI bus.
Since we want just read the board ID, we used manually the sspi command,
something like:
=> sspi 1:1.0 8 0
42
But it seems that the sspi
On 26/11/2019 22:12, Anand Moon wrote:
> Enable GIC support for G12A/G12B platform.
>
> Signed-off-by: Anand Moon
> ---
> include/configs/meson64.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/configs/meson64.h b/include/configs/meson64.h
> index 736081277d..
On 26/11/2019 22:12, Anand Moon wrote:
> commit a10388dc6982 ("mmc: meson-gx: add support for mmc-pwrseq-emmc")
> introduce CONFIG_PWESEQ for power sequence for eMMC module on
> amlogic platform, so enable this to all amlogic boards.
>
> Signed-off-by: Anand Moon
> ---
> arch/arm/mach-meson/Kcon
On Wed, Nov 27, 2019 at 02:03:03PM +0800, Bin Meng wrote:
> Hi Tom,
>
> On Wed, Nov 20, 2019 at 10:22 PM Tom Rini wrote:
> >
> > On Wed, Nov 20, 2019 at 10:11:00AM +0800, Bin Meng wrote:
> > > Hi Tom,
> > >
> > > On Fri, Nov 15, 2019 at 4:21 PM Bin Meng wrote:
> > > >
> > > > From: Lihua Zhao
>
Hi,
On 26/11/2019 22:12, Anand Moon wrote:
> Add missing config option CONFIG_MESON_GXBB and CONFIG_SYS_BOARD,
> for odroid-c2 and nanopi k2 board
>
> Signed-off-by: Anand Moon
> ---
> configs/nanopi-k2_defconfig | 2 ++
> configs/odroid-c2_defconfig | 2 ++
> 2 files changed, 4 insertions(+)
>
The SAMA5D2 and SAMA5D4 series SoCs have a 64-bit Serial Number (unique
ID) burned in, which is displayed with 'print_cpuinfo()' now (in the
same format the SAM-BA applet prints it).
Example output:
CPU: SAMA5D27 1G bits DDR2 SDRAM
Serial number 0: 0x4630394b
1: 0x190d2750
Crystal f
Hi,
On 27.11.2019 03:26, AKASHI Takahiro wrote:
> Thank you for the heads-up.
>
> On Tue, Nov 26, 2019 at 11:57:29AM -0500, Tom Rini wrote:
>> On Tue, Nov 26, 2019 at 09:15:07AM +0100, Marek Szyprowski wrote:
>>
>>> The code for handing file overwrite incorrectly assumed that the file on
>>> disk
Hi Andy,
> The stock U-Boot on Intel Edison has timeout parameter for DFU
> command. Enable it here to be compatible with the original U-Boot
> configuration.
>
> Signed-off-by: Andy Shevchenko
> ---
> configs/edison_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/configs/ed
Hi Andy,
Thank you for your work on enhancing DFU. The patch series is generally
Ok.
Please find some minor comments/requests below.
> When the `dfu` command is called from the U-Boot environment,
> it now accepts an optional parameter that specifies a timeout (in
> seconds). If a DFU connection
On Wed, 13 Nov 2019 19:43:41 +0200
Andy Shevchenko wrote:
> After the commit 1cc03c5c53c0 ("dfu: Provide means to find difference
> between dfu-util -e and -R") the dangling ptototype appeared. Remove
> it here.
>
> Fixes: 1cc03c5c53c0 ("dfu: Provide means to find difference between
> dfu-util -
On Wed, 13 Nov 2019 19:43:42 +0200
Andy Shevchenko wrote:
> In the future we may utilize optional argument in 'dfu' command line.
> As a preparation for this, refactor do_dfu().
>
> Signed-off-by: Andy Shevchenko
> ---
> cmd/dfu.c | 17 ++---
> 1 file changed, 10 insertions(+), 7 d
1 - 100 of 140 matches
Mail list logo