On Mon, Feb 19, 2024 at 7:53 PM Fabio Estevam wrote:
>
> On Mon, Feb 19, 2024 at 8:01 PM Jesse Taube wrote:
> >
> > Add support for booting the imxrt1050-evk from spi.
> > Add imximage config and the ability for SPL to boot from NOR.
> > Enable binman in Kco
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Enable binman in Kconfig and device tree for imxrt* as it is used to
prepend fspi_header.bin to SPL and u-boot.img.
Signed-off-by: Jesse Taube
---
V1 -> V2:
- Add defcon
Add documentation for SPI boot.
Signed-off-by: Jesse Taube
---
V1 -> V2:
- Change s/Adds/Add
- Change imxrt1050-evk_spi to fspi
- Fix spelling and grammar
- Mention the SPI NOR flash part number
V2 -> V3:
- No changes
V3 -> V4:
- No changes
---
doc/board/nxp/imxrt1050-evk
On Sun, Feb 18, 2024 at 9:12 PM Fabio Estevam wrote:
>
> On Sun, Feb 18, 2024 at 10:39 PM Fabio Estevam wrote:
> >
> > Hi Jesse,
> >
> > On Sun, Feb 18, 2024 at 6:20 PM Jesse Taube wrote:
> > >
> > > Enable binman in Kconfig and in device tree
Add documentation for SPI boot.
Signed-off-by: Jesse Taube
---
V1 -> V2:
- Change s/Adds/Add
- Change imxrt1050-evk_spi to fspi
- Fix spelling and grammar
- Mention the SPI NOR flash part number
V2 -> V3:
- No changes
---
doc/board/nxp/imxrt1050-evk.rs
Enable binman in Kconfig and in device tree.
Signed-off-by: Jesse Taube
---
V2 -> V3:
- New commit
---
arch/arm/dts/imxrt1020-evk-u-boot.dtsi | 4
arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 4
arch/arm/dts/imxrt1170-evk-u-boot.dtsi | 4
arch/arm/mach-imx/imxrt/Kconfig
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Signed-off-by: Jesse Taube
---
V1 -> V2:
- Add defconfig to MAINTAINERS
- Change Copyright of imximage-nor.cfg to myself
- Fix spelling and grammar
- Use imperative mood
V2 -&
On Thu, Feb 8, 2024 at 8:08 AM Fabio Estevam wrote:
>
> Hi Jesse,
>
> On Tue, Feb 6, 2024 at 1:40 PM Jesse Taube wrote:
> >
> > Add support for booting the imxrt1050-evk from spi.
> > Add imximage config and the ability for SPL to boot from NOR.
>
Add support for booting the imxrt1050-evk from spi.
Add imximage config and the ability for SPL to boot from NOR.
Signed-off-by: Jesse Taube
---
V1 -> V2:
- Add defconfig to MAINTAINERS
- Change Copyright of imximage-nor.cfg to myself
- Fix spelling and grammar
- Use imperative m
Add documentation for SPI boot.
Signed-off-by: Jesse Taube
---
V1 -> V2:
- Change s/Adds/Add
- Change imxrt1050-evk_spi to fspi
- Fix spelling and grammar
- Mention the SPI NOR flash part number
---
doc/board/nxp/imxrt1050-evk.rst | 30 ++
1 file changed,
On Fri, Feb 2, 2024 at 3:40 AM Heinrich Schuchardt wrote:
>
> On 2/1/24 16:00, Jesse Taube wrote:
> > Add documentation for imxrt1170-evk.
> >
> > Signed-off-by: Jesse Taube
> > ---
> > doc/board/nxp/imxrt1170-evk.rst | 42 +
Add documentation for imxrt1170-evk.
Signed-off-by: Jesse Taube
---
doc/board/nxp/imxrt1170-evk.rst | 42 +
1 file changed, 42 insertions(+)
create mode 100644 doc/board/nxp/imxrt1170-evk.rst
diff --git a/doc/board/nxp/imxrt1170-evk.rst b/doc/board/nxp
On Mon, Jan 29, 2024 at 8:34 AM Fabio Estevam wrote:
>
> On Sun, Jan 28, 2024 at 6:43 PM Jesse Taube wrote:
>
> > +++ b/configs/imxrt1050-evk_fspi_defconfig
> > @@ -0,0 +1,100 @@
> > +CONFIG_ARM=y
> > +CONFIG_SYS_DCACHE_OFF=y
>
> Out of curiosity: what ar
Adds documentation for SPI boot.
Signed-off-by: Jesse Taube
---
doc/board/nxp/imxrt1050-evk.rst | 29 +
1 file changed, 29 insertions(+)
diff --git a/doc/board/nxp/imxrt1050-evk.rst b/doc/board/nxp/imxrt1050-evk.rst
index c1fb48f0cd..aca5071181 100644
--- a/doc
This add some macros to change addresses to use flexspi.
This commit adds support for booting the imxrt1050-evk from spi.
It adds imximage config and the ability for SPL to boot from NOR.
Signed-off-by: Jesse Taube
---
arch/arm/dts/imxrt1050-evk-u-boot.dtsi| 31 ++
arch/arm/mach
Modify imx8m Flex SPI Configuration Block to work with imxrt.
Add more Flex SPI configuration options to Kconfig.
Signed-off-by: Jesse Taube
---
include/imximage.h | 42 +
tools/Kconfig | 21 +
tools/imx8mimage.c | 41
tools
SoCs
>
> arch/arm/Kconfig | 1 +
> arch/arm/dts/sunxi-u-boot.dtsi | 39 ++
> arch/arm/mach-sunxi/Kconfig| 17 +++
> common/spl/Kconfig | 6 ++
> 4 files changed, 41 insertions(+), 22 deletions(-)
>
> --
> 2.41.0
>
Acked-by: Jesse Taube
Looks good!
Add support to boot from script.scr from mmc.
imxrt1050-evk was not able to boot from script.scr because we did not
include config_distro_bootcmd.h and set the device to mmc.
Signed-off-by: Jesse Taube
---
configs/imxrt1050-evk_defconfig | 2 +-
include/configs/imxrt1050-evk.h | 15
On Fri, Aug 25, 2023 at 2:06 PM Simon Glass wrote:
>
> On Fri, 25 Aug 2023 at 08:49, Tom Rini wrote:
> >
> > On Thu, Aug 24, 2023 at 09:59:48PM -0400, Jesse Taube wrote:
> >
> > > Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*&
iable were unaffected because they were using the default value
which is CONFIG_TEXT_BASE.
This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
value to CONFIG_TEXT_BASE.
Suggested-by: Marek Vasut
Suggested-by: Tom Rini
Signed-off-by: Jesse Taube
---
V1->V2:
- Add
On Thu, Aug 24, 2023 at 4:01 PM Simon Glass wrote:
>
> Hi Jesse,
>
> On Wed, 23 Aug 2023 at 20:30, Jesse Taube wrote:
> >
> > Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*")
> > renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UB
iable were unaffected because they were using the default value
which is CONFIG_TEXT_BASE.
This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
value to CONFIG_TEXT_BASE.
Suggested-by: Marek Vasut
Suggested-by: Tom Rini
Signed-off-by: Jesse Taube
---
/sunxi-u-boot.dtsi
@@ -1,5 +1,11 @@
#include
+#ifdef CONFIG_ARM64
+#define ARCH "arm64"
+#else
+#define ARCH "arm"
+#endif
+
There should be a better way to do this, but if not shouldn't the else
should be elseif because of the RISCV SOCs.
The rest looks fine to
in v3:
- Incorporate feedback from Jesse.
Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 162 ++--
arch/arm/dts/imxrt1050-evk.dts | 257 +++-
arch/arm/dts
On 10/22/22 08:57, Marcel Ziswiler wrote:
Hi Jesse
Sorry, I kinda missed your reply and imx maintainership was quiet for quite
some time. I am now preparing a v3
taking your feedback into account. Thanks!
On Sun, 2022-08-28 at 02:50 -0400, Jesse Taube wrote:
On 8/26/22 14:31, Marcel
_f1c200s_defconfig
@@ -0,0 +1,11 @@
+CONFIG_ARM=y
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="suniv-f1c100s-cherrypi-f1c200s"
+CONFIG_SPL=y
+CONFIG_MACH_SUNIV=y
+CONFIG_DRAM_CLK=156
+CONFIG_DRAM_ZQ=0
You need
+CONFIG_SPL_STACK=0x8000
I will test this on both 100s and 200s.
Thanks,
Jesse Taube
+CONFIG_SUNXI_MINIMUM_DRAM_MB=64
+# CONFIG_VIDEO_SUNXI is not set
+CONFIG_CONS_INDEX=2
--
2.25.1
On 7/27/22 13:19, sba...@denx.de wrote:
The i.MXRT11 series has different offsets for IOCR_MUX, it also can
address 64MiB of SDRAM so add a macro for that.
Signed-off-by: Jesse Taube
Applied to u-boot-imx, master, thanks !
Was this ever applied?
Thanks,
Jesse
Best regards,
Stefano Babic
_usdhc0 {
Add diff:
compatible = "fsl,imxrt-usdhc";
I tested this
https://github.com/Mr-Bossman/u-boot/commit/42a7f430d761bb4d44f646a27649deda15352f2e
Some note for future, check if the compatibles are the same they arent
here so the soc.dtsi will be broken. Also wait a bit for oth
.
If needed I can sync it as well as test.
Thanks,
Jesse
I don't have access to this platform. Adding Jesse and Giulio.
features
as follows:
GPIO
LPUART
SD/MMC
SDRAM
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Remove unused constant clocks
V2 -> V3:
* Nothing done
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imxrt1170-evk-u-boot.dtsi | 94 +
arch/arm/dts/imxrt1170-evk.dts
Add a base defconfig for the i.MXRT1170
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
V2 -> V3:
* Rebase
---
configs/imxrt1170-evk_defconfig | 70 +
include/configs/imxrt1170-evk.h | 29 ++
2 files changed, 99 insertions(+)
creat
The i.MXRT11 series has different offsets for IOCR_MUX, it also can
address 64MiB of SDRAM so add a macro for that.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
V2 -> V3:
* Nothing done
---
drivers/ram/imxrt_sdram.c| 9 +
include/dt-bindings/memory
Add clock driver support for i.MXRT1170.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Use C file not dts for constant clock divider
V2 -> V3:
* Nothing done
---
drivers/clk/imx/Kconfig | 16 +++
drivers/clk/imx/Makefile| 1 +
drivers/clk/imx/clk-imxrt1170.c
The i.MXRT11 series has two new pll types but are variants of existing.
This patch adds the ability to read one of the pll types' frequency
as it can't be changed unlike the generic pll it also has the
division factors swapped.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Change BM_PLL_PO
Add the clock binding doc for i.MXRT1170.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
V2 -> V3:
* Nothing done
---
include/dt-bindings/clock/imxrt1170-clock.h | 48 +
1 file changed, 48 insertions(+)
create mode 100644 include/dt-bindings/clock/imxrt1170-c
Add binding header for i.MXRT1170 pinctrl device tree.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
V2 -> V3:
* Nothing done
---
arch/arm/dts/imxrt1170-pinfunc.h | 1561 ++
1 file changed, 1561 insertions(+)
create mode 100644 arch/arm/dts/imx
This commit adds board support for i.MXRT1170-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT117x processor family.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
V2 -> V3:
* Rebase
---
arch/arm/include/asm/arch-imx/cpu.h | 1 +
arch/arm/ma
This patchset contains:
- i.MXRT1170 clock driver adaption
- i.MXRT1170-evk basic support
Jesse Taube (8):
imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK
ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header
dt-bindings: imx: Add clock binding for i.MXRT1170
clk: imx: Add
On 7/25/22 09:34, Stefano Babic wrote:
Hi Jesse,
I get errors as soon as I merge the series:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/471284
In fact, you add new CONFIG_ but not via Kbuild:
CONFIG_SPL_STACK
CONFIG_SYS_FSL_ERRATUM_ESDHC13
I'm sorry I need to rebase
On 7/11/22 10:19, Andre Przywara wrote:
> On Mon, 11 Jul 2022 15:11:13 +0100
> Andre Przywara wrote:
>
>> On Mon, 11 Jul 2022 13:57:40 +0100
>> Andre Przywara wrote:
>>
>> Hi,
>>
>>> On Sun, 10 Jul 2022 03:09:53 -0400
>>> Jesse Tau
On 7/11/22 08:57, Andre Przywara wrote:
> On Sun, 10 Jul 2022 03:09:53 -0400
> Jesse Taube wrote:
>
> Hi Jesse,
>
>> In Binutils 2.37 the ADR instruction has changed
>> use alternate instructions.
>
> Can you elaborate on this? What has changed exactly, and
In Binutils 2.37 the ADR instruction has changed
use alternate instructions.
The change causes armv7-m to not boot.
Signed-off-by: Jesse Taube
---
arch/arm/lib/relocate.S | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib
On 7/6/22 10:47, Tom Rini wrote:
On Wed, Jul 06, 2022 at 10:31:41AM -0400, Jesse Taube wrote:
On 11/30/21 14:36, Tom Rini wrote:
On Mon, Nov 29, 2021 at 09:35:52PM -0500, Jesse Taube wrote:
On 11/29/21 11:28, Tom Rini wrote:
Hey all,
It's been two weeks since v2022.01-rc2, so here's
On 11/30/21 14:36, Tom Rini wrote:
On Mon, Nov 29, 2021 at 09:35:52PM -0500, Jesse Taube wrote:
On 11/29/21 11:28, Tom Rini wrote:
Hey all,
It's been two weeks since v2022.01-rc2, so here's -rc3.
To repeat what I said with -rc2, we've enabled issue tracking on our
gitlab instance. You
t/
Tested-by: Jesse Taube
I talked to Icenowy who also tested and said it worked with spi-nand.
There is one issue but not related to this set, the SPI max clock is 1Mhz.
Another note disabling the clock gates in `sun4i_spi_set_clock` will
stop you from dumping the memory of the peripheral.
t/
So can people please test this and report whether this now works as
expected?
I'm very confused I have forgotten much about this patch set.
I'm going to test it, but why has it only been merged now?
Thanks,
Jesse
Thanks,
Andre
So far we get away with that default frequency, because that i
features
as follows:
GPIO
LPUART
SD/MMC
SDRAM
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Remove unused constant clocks
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imxrt1170-evk-u-boot.dtsi | 94 +
arch/arm/dts/imxrt1170-evk.dts |
Add a base defconfig for the i.MXRT1170
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
---
configs/imxrt1170-evk_defconfig | 67 +
include/configs/imxrt1170-evk.h | 37 ++
2 files changed, 104 insertions(+)
create mode 100644 conf
Add binding header for i.MXRT1170 pinctrl device tree.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
---
arch/arm/dts/imxrt1170-pinfunc.h | 1561 ++
1 file changed, 1561 insertions(+)
create mode 100644 arch/arm/dts/imxrt1170-pinfunc.h
diff --git a/a
The i.MXRT11 series has different offsets for IOCR_MUX, it also can
address 64MiB of SDRAM so add a macro for that.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
---
drivers/ram/imxrt_sdram.c| 9 +
include/dt-bindings/memory/imxrt-sdram.h | 1 +
2 files chan
Add clock driver support for i.MXRT1170.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Use C file not dts for constant clock divider
---
drivers/clk/imx/Kconfig | 16 +++
drivers/clk/imx/Makefile| 1 +
drivers/clk/imx/clk-imxrt1170.c | 221
The i.MXRT11 series has two new pll types but are variants of existing.
This patch adds the ability to read one of the pll types' frequency
as it can't be changed unlike the generic pll it also has the
division factors swapped.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Change BM_PLL_PO
Add the clock binding doc for i.MXRT1170.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
---
include/dt-bindings/clock/imxrt1170-clock.h | 48 +
1 file changed, 48 insertions(+)
create mode 100644 include/dt-bindings/clock/imxrt1170-clock.h
diff --git a/include
This commit adds board support for i.MXRT1170-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT117x processor family.
Signed-off-by: Jesse Taube
---
V1 -> V2:
* Nothing done
---
arch/arm/include/asm/arch-imx/cpu.h | 1 +
arch/arm/mach-imx/imxrt/Kcon
This patchset contains:
- i.MXRT1170 clock driver adaption
- i.MXRT1170-evk basic support
Jesse Taube (8):
imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK
ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header
dt-bindings: imx: Add clock binding for i.MXRT1170
clk: imx: Add
interrupts = <16>;
+ clocks = <>;
};
uart0: serial@1c25000 {
@@ -114,8 +198,8 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = < 38>;
- resets = < 24>;
+ clocks = < CLK_BUS_UART0>;
+ resets = < RST_BUS_UART0>;
status = "disabled";
};
@@ -125,8 +209,8 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = < 39>;
- resets = < 25>;
+ clocks = < CLK_BUS_UART1>;
+ resets = < RST_BUS_UART1>;
status = "disabled";
};
@@ -136,8 +220,8 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = < 40>;
- resets = < 26>;
+ clocks = < CLK_BUS_UART2>;
+ resets = < RST_BUS_UART2>;
status = "disabled";
};
};
Acked-by: Jesse Taube
On 3/20/22 15:17, Sean Anderson wrote:
On 3/17/22 2:32 PM, Jesse Taube wrote:
Add clock driver support for i.MXRT1170.
Signed-off-by: Jesse Taube
---
drivers/clk/imx/Kconfig | 16 +++
drivers/clk/imx/Makefile| 1 +
drivers/clk/imx/clk-imxrt1170.c | 215
The Linux kernel moved dt-bindings/pinctrl/pins-imxrt to the device tree
This patch move it in U-Boot as well.
Signed-off-by: Jesse Taube
---
arch/arm/dts/imxrt1020-evk.dts | 2 +-
.../pins-imxrt1020.h => arch/arm/dts/imxrt1020-pinfunc.h| 0
arch/arm/
1M of heap is more than internal ram making booting without SDRAM not
possible now it is 256k
Signed-off-by: Jesse Taube
---
configs/imxrt1020-evk_defconfig | 2 +-
configs/imxrt1050-evk_defconfig | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/configs/imxrt1020
If FALCON mode is enabled we have a missing include in spl_start_uboot.
Signed-off-by: Jesse Taube
---
board/freescale/imxrt1020-evk/imxrt1020-evk.c | 1 +
board/freescale/imxrt1050-evk/imxrt1050-evk.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/board/freescale/imxrt1020-evk/imxrt1020
In Linux IMX and IMXRT use the device tree to hold the anatop address.
The anatop is used in clock drivers as it controls the internal PLLs
This will move the macro from asm/arch-imxrt to the device tree.
This presumably should also be done with the other IMX boards as well.
Signed-off-by: Jesse
Add binding header for i.MXRT1170 pinctrl device tree.
Signed-off-by: Jesse Taube
---
arch/arm/dts/imxrt1170-pinfunc.h | 1561 ++
1 file changed, 1561 insertions(+)
create mode 100644 arch/arm/dts/imxrt1170-pinfunc.h
diff --git a/arch/arm/dts/imxrt1170-pinfunc.h b
Updates to the imxrt family include:
- Adding missing include in board
- Moving pinctrl binding to dts
- Reducing SYS_MALLOC_LEN
- Using device tree for anatop base address
Jesse Taube (4):
clk: imxrt: Use dts for anatop base address
configs/*imxrt10*: SYS_MALLOC_LEN is too large
ARM: dts
features
as follows:
GPIO
LPUART
SD/MMC
SDRAM
Signed-off-by: Jesse Taube
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imxrt1170-evk-u-boot.dtsi | 106 ++
arch/arm/dts/imxrt1170-evk.dts | 246 ++
arch/arm/dts/imxrt1170.dtsi| 274
Add a base defconfig for the i.MXRT1170
Signed-off-by: Jesse Taube
---
configs/imxrt1170-evk_defconfig | 67 +
include/configs/imxrt1170-evk.h | 37 ++
2 files changed, 104 insertions(+)
create mode 100644 configs/imxrt1170-evk_defconfig
create
The i.MXRT11 series has different offsets for IOCR_MUX, it also can
address 64MiB of SDRAM so add a macro for that.
Signed-off-by: Jesse Taube
---
drivers/ram/imxrt_sdram.c| 9 +
include/dt-bindings/memory/imxrt-sdram.h | 1 +
2 files changed, 10 insertions(+)
diff
The i.MXRT11 series has two new pll types but are variants of existing.
This patch adds the ability to read one of the pll types' frequency
as it can't be changed unlike the generic pll it also has the
division factors swapped.
Signed-off-by: Jesse Taube
---
drivers/clk/imx/clk-pllv3.c | 44
Add clock driver support for i.MXRT1170.
Signed-off-by: Jesse Taube
---
drivers/clk/imx/Kconfig | 16 +++
drivers/clk/imx/Makefile| 1 +
drivers/clk/imx/clk-imxrt1170.c | 215
3 files changed, 232 insertions(+)
create mode 100644 drivers/clk
Add the clock binding doc for i.MXRT1170.
Signed-off-by: Jesse Taube
---
include/dt-bindings/clock/imxrt1170-clock.h | 48 +
1 file changed, 48 insertions(+)
create mode 100644 include/dt-bindings/clock/imxrt1170-clock.h
diff --git a/include/dt-bindings/clock/imxrt1170
This commit adds board support for i.MXRT1170-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT117x processor family.
Signed-off-by: Jesse Taube
---
arch/arm/include/asm/arch-imx/cpu.h | 1 +
arch/arm/mach-imx/imxrt/Kconfig | 9 +++
arch/arm/mach
This patchset contains:
- i.MXRT1170 clock driver adaption
- i.MXRT1170-evk basic support
Jesse Taube (8):
imx: imxrt1170-evk: Add support for the NXP i.MXRT1170-EVK
ARM: dts: imxrt11170-pinfunc: Add pinctrl binding header
dt-bindings: imx: Add clock binding for i.MXRT1170
clk: imx: Add
Adds documentation for SPI boot.
Signed-off-by: Jesse Taube
---
doc/board/nxp/imxrt1050-evk.rst | 41 +
1 file changed, 41 insertions(+)
diff --git a/doc/board/nxp/imxrt1050-evk.rst b/doc/board/nxp/imxrt1050-evk.rst
index c1fb48f0cd..0838a04871 100644
--- a/doc
This add some macros to change addresses to use flexspi.
This commit adds support for booting the imxrt1050-evk from spi.
It adds imximage config and the ability for SPL to boot from NOR.
Signed-off-by: Jesse Taube
---
.../freescale/imxrt1050-evk/imximage-nor.cfg | 42
In Linux IMX and IMXRT use the device tree to hold the anatop address.
The anatop is used in clock drivers as it controls the internal PLLs
This will move the macro from asm/arch-imxrt to the device tree.
This presumably should also be done with the other IMX boards as well.
Signed-off-by: Jesse
Hey just checking if you know about this set.
This patch adds the ability to detect the BROM's boot source,
as well as the ability to boot from SPI.
Jesse Taube (3):
mach-sunxi: Add boot device detection for SUNIV/F1C100s
mach-sunxi: Add SPL SPI boot for SUNIV
mach-sunxi: Enable SPI
On 2/11/22 19:32, Jesse Taube wrote:
In contrast to other Allwinner SoCs the F1C100s BROM does not store a
boot source indicator in the eGON header in SRAM. This leaves the SPL
guessing where we were exactly booted from, and for instance trying
the SD card first, even though we booted from
Enable SPI boot in SPL on SUNIV architecture and use
it in the licheepi nano that uses the F1C100s.
Signed-off-by: Jesse Taube
Reviewed-by: Andre Przywara
---
V1 -> V2:
* Change commit description
---
arch/arm/mach-sunxi/Kconfig | 2 +-
configs/licheepi_nano_defconfig | 1 +
2 fi
-off-by: Jesse Taube
[Jesse: adaptation to Upstream U-Boot]
---
V1 -> V2:
* Change commit description
* Remove redundant conditional statment
* Use else if for pin-function
---
arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
arch/arm/mach-sunxi/spl_spi_sunxi.c| 24 +---
-by: Jesse Taube
Suggested-by: Samuel Holland
---
V1 -> V2:
* Bail on NAND
* Change commit description
* Change sunxi_get_boot_source to u32
* Fix FEL boot by next change
* Move suniv_get_boot_device call into sunxi_get_boot_source
* Rename suniv_get_boot_device
* Remove redundant comments
---
arch/
This patch adds the ability to detect the BROM's boot source,
as well as the ability to boot from SPI.
Jesse Taube (3):
mach-sunxi: Add boot device detection for SUNIV/F1C100s
mach-sunxi: Add SPL SPI boot for SUNIV
mach-sunxi: Enable SPI boot for SUNIV and licheepi nano
arch/arm/include
On 2/10/22 14:38, Siarhei Siamashka wrote:
On Thu, Feb 10, 2022 at 6:35 AM Jesse Taube wrote:
[...]
+ case SUNIV_BOOTED_FROM_NAND:
+ case SUNIV_BOOTED_FROM_SPI:
+ return BOOT_DEVICE_SPI;
Is it really okay to lump SPI and NAND together and return
BOOT_DEVICE_SPI
On 2/10/22 05:57, Andre Przywara wrote:
On Wed, 9 Feb 2022 23:34:36 -0500
Jesse Taube wrote:
Hi Jesse,
many thanks for sending this, much appreciated!
Use Samuel's suggestion of looking at the BootRom's stack
to determine the boot device.
Can you please elaborate here what's going
On 2/10/22 05:57, Andre Przywara wrote:
On Wed, 9 Feb 2022 23:34:36 -0500
Jesse Taube wrote:
Hi Jesse,
many thanks for sending this, much appreciated!
Use Samuel's suggestion of looking at the BootRom's stack
to determine the boot device.
Can you please elaborate here what's going
Enable spi boot in spl on suniv architecture.
Signed-off-by: Jesse Taube
---
arch/arm/mach-sunxi/Kconfig | 2 +-
configs/licheepi_nano_defconfig | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 205fe3c9d3
Add support for the spi boot in spl on suniv architecture.
Signed-off-by: Jesse Taube
---
arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
arch/arm/mach-sunxi/spl_spi_sunxi.c| 26 +++---
2 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/arch/arm/include/asm
Use Samuel's suggestion of looking at the BootRom's stack
to determine the boot device.
Signed-off-by: Jesse Taube
Suggested-by: Samuel Holland
---
arch/arm/include/asm/arch-sunxi/spl.h | 15
arch/arm/mach-sunxi/board.c | 50 ---
2 files changed, 38
This patch adds the ability to detect the
BROM's boot source as well as the ability to boot from spi.
Jesse Taube (3):
mach-sunxi: Add boot device detection for SUNIV
mach-sunxi: Add spi boot for SUNIV
mach-sunxi: Enable spi boot for SUNIV
arch/arm/include/asm/arch-sunxi/gpio.h | 1
longer about 2 days. You also may want to find other people more
relevant to this patch. Do you have an online presence like linkedin,
github etc?
Thanks,
Jesse Taube
---
drivers/timer/Kconfig | 6 ++
drivers/timer/Makefile | 1 +
drivers/timer/npcm-timer.c | 110
sure why I have been CCed in many of you recent patches is there a
reason for this?
Thank you,
Jesse Taube
+
+/*
+ * 24-bits down-counting hw timer.
+ * last_count: last hw counter value.
+ * counter: the value to be returned for get_count ops.
+ */
+struct npcm_timer_priv {
+
you see UART output from the SPL, or nothing at all?
Unfortunately nothing either with SPL
And you are not using UART0 on the PortF pins, so multiplexed with the
MMC, I guess?
I use PE0 and PE1 Uart0 according to dts.
Have you got such board to test it?
Or we can wait for Jesse or George
On 1/30/22 21:04, Andre Przywara wrote:
Hi,
thanks to the tireless work of Jesse, I think the basic Allwinner
F1C100s support for mainline U-Boot is now ready to be merged. Since I
don't have the hardware, can any of you who have boards please give it a
try on their hardware? I would really
On 1/29/22 16:21, Giulio Benetti wrote:
On 29/01/22 22:19, Jesse Taube wrote:
On 1/29/22 16:05, Jesse Taube wrote:
On 1/29/22 15:59, Samuel Holland wrote:
On 1/29/22 5:51 AM, Andre Przywara wrote:
On Fri, 28 Jan 2022 22:21:28 -0500
Jesse Taube wrote:
On 1/26/22 09:38, Jesse Taube
On 1/29/22 16:05, Jesse Taube wrote:
On 1/29/22 15:59, Samuel Holland wrote:
On 1/29/22 5:51 AM, Andre Przywara wrote:
On Fri, 28 Jan 2022 22:21:28 -0500
Jesse Taube wrote:
On 1/26/22 09:38, Jesse Taube wrote:
On 1/26/22 09:13, Andre Przywara wrote:
On Tue, 4 Jan 2022 19:35:06 -0500
On 1/29/22 15:59, Samuel Holland wrote:
On 1/29/22 5:51 AM, Andre Przywara wrote:
On Fri, 28 Jan 2022 22:21:28 -0500
Jesse Taube wrote:
On 1/26/22 09:38, Jesse Taube wrote:
On 1/26/22 09:13, Andre Przywara wrote:
On Tue, 4 Jan 2022 19:35:06 -0500
Jesse Taube wrote:
u32
On 1/29/22 06:51, Andre Przywara wrote:
On Fri, 28 Jan 2022 22:21:28 -0500
Jesse Taube wrote:
On 1/26/22 09:38, Jesse Taube wrote:
On 1/26/22 09:13, Andre Przywara wrote:
On Tue, 4 Jan 2022 19:35:06 -0500
Jesse Taube wrote:
Hi Jesse,
I was checking some bits and pieces here, so
From: Icenowy Zheng
The Lichee Pi Nano is a board based on the F1C100s.
Add defconfigs for it.
Signed-off-by: Icenowy Zheng
Signed-off-by: Jesse Taube
---
V1->V2:
* Add SKIP_LOWLEVEL_INIT_ONLY
* Remove spi defconfig
V2->V3:
* Move SYS_MALLOC_F_LEN to kconf and format it
* Move SYS_LOA
From: Icenowy Zheng
Add device tree files for suniv and
Lichee Pi Nano it is a board based on F1C100s.
dt-bindings/dts are synced with 5.16.0
Signed-off-by: Icenowy Zheng
Signed-off-by: Jesse Taube
---
V1->V2:
* Sync with Linux
* Re-add MMC node
V2->V3:
* Add ifndef for mmc in s
From: Icenowy Zheng
Add support for the suniv architecture, which is newer ARM9 SoCs by
Allwinner. The design of it seems to be a mixture of sun3i, sun4i and
sun6i.
Signed-off-by: Icenowy Zheng
Signed-off-by: Jesse Taube
---
V1->V2:
* Remove change in s_init (sunxi: remove lowlevel_init)
From: Icenowy Zheng
Adds support for SUNIV and the F1C100s.
Signed-off-by: Icenowy Zheng
Reviewed-by: Andre Przywara
Signed-off-by: Jesse Taube
---
V1->V2:
* Combine ifdefs
* Fix indentation
* Fix negative logic
* Fix rebase artifacts
* Remove CONFIG_SYS_LOAD_ADDR
* Rem
From: Icenowy Zheng
Add support for F1C100s internal dram controller.
Signed-off-by: Icenowy Zheng
Signed-off-by: Jesse Taube
---
V1->V2:
* Nothing done
V2->V3:
* Nothing done
---
arch/arm/include/asm/arch-sunxi/dram.h | 2 +
arch/arm/include/asm/arch-sunxi/dram_suniv.h
1 - 100 of 174 matches
Mail list logo
