> -Original Message-
> From: Wolfgang Denk [mailto:w...@denx.de]
> Sent: Monday, June 28, 2010 5:32 PM
> To: Tor Krill
> Cc: Prafulla Wadaskar; u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH V2] Allow PHY addresses on
> kirkwood egiga to be non continuous
Dear Tor Krill,
In message <1277716302.2221.37.ca...@tor-desktop> you wrote:
>
> > 2. For the boards using single port will also need to configure PHY address
> > for other port, which is meaningless, unnecessary and confusing.
>
> Sure you had to put something there to be on the safe side. But
On Thu, 2010-06-24 at 18:37 +0200, Mike Frysinger wrote:
> On Thursday, June 24, 2010 05:31:47 Tor Krill wrote:
> > void reset_phy(void)
> > {
> > char *name = "egiga0";
> > + u8 port_addr[] = CONFIG_PHY_ADDRS;
> >
> > if (miiphy_set_current_dev(name))
> > return;
> >
> >
On Thu, 2010-06-24 at 14:26 +0200, Prafulla Wadaskar wrote:
>
> > -Original Message-
> > From: Tor Krill [mailto:t...@excito.com]
> > Sent: Thursday, June 24, 2010 5:05 PM
> > To: Prafulla Wadaskar
> > Cc: u-boot@lists.denx.de
> > Subject: RE: [PATCH V2] Allow PHY addresses on kirkwood eg
Hi all,
Le 24/06/2010 18:37, Mike Frysinger a écrit :
> i dont know anything about the kirkwood_egiga, but cant you have more than one
> instance on a board ? if so, it'd make more sense to change the phy addr
> define stuff into an array argument that gets passed to the driver init func.
> -mik
On Thursday, June 24, 2010 05:31:47 Tor Krill wrote:
> void reset_phy(void)
> {
> char *name = "egiga0";
> + u8 port_addr[] = CONFIG_PHY_ADDRS;
>
> if (miiphy_set_current_dev(name))
> return;
>
> /* reset the phy */
> - miiphy_reset(name, CONFIG_PHY_BASE_
Hi Prafulla,
On Thu, 2010-06-24 at 13:22 +0200, Prafulla Wadaskar wrote:
>
> > -Original Message-
> > From: Tor Krill [mailto:t...@excito.com]
> > Sent: Thursday, June 24, 2010 3:02 PM
> > To: u-boot@lists.denx.de
> > Cc: Prafulla Wadaskar; Tor Krill
> > Subject: [PATCH V2] Allow PHY ad
> -Original Message-
> From: Tor Krill [mailto:t...@excito.com]
> Sent: Thursday, June 24, 2010 3:02 PM
> To: u-boot@lists.denx.de
> Cc: Prafulla Wadaskar; Tor Krill
> Subject: [PATCH V2] Allow PHY addresses on kirkwood egiga to
> be non continuous.
>
> Changing its configuration from
Changing its configuration from PHY_BASE_ADR single value to use
CONFIG_PHY_BASE_ADDRS as an array with adresses.
Updated in version 2:
Merged board updates to single patch.
Signed-off-by: Tor Krill
---
board/keymile/km_arm/km_arm.c |3 ++-
drivers/net/kirkwood_egiga.c |3 ++-
drivers
9 matches
Mail list logo
