2.4GHz and/or 5GHz?
On Fri, Nov 17, 2017 at 3:38 PM, J Portman wrote:
> Just as a data point, we upgraded one of our towers to run sync in mixed
> mode a few weeks ago and it has performed flawlessly.
>
> We are getting ready to roll sync out to the entire network (60+ APS). I
Hi David,
I would like to have a look if you have any MM sectors that are seeing a
larger discrepancy between UDP and TCP performance. Sending you an email.
>No matter what I tried with UBNT I could not get my legacy devices to pull
more than 40mbps TCP on a sector with more than 35 devices
We tried an AC with MM sync And the performance is worse than just mixed
mode. It may have to do with the clients that have poor signal. With an
elevated XM I can pull 70mbps at a -73 signal with 60 other people
connected to the AP on a 40mhz channel. with a - 64 signal I can pull
94mbps maxing
Just as a data point, we upgraded one of our towers to run sync in mixed mode a
few weeks ago and it has performed flawlessly.
We are getting ready to roll sync out to the entire network (60+ APS). I will
report on our progress.
YMMV,
JP
On Fri, 17 Nov 2017 19:56:17 +, Rory Conaway wrote
Mine does. Using AC 2.1 Beta9
On Fri, Nov 17, 2017 at 7:31 AM, Troy Gibson, Byhalia.net,LLC <
t...@byhalia.net> wrote:
> Beta 6 or 7 still does not find 6.0.4. I have had to go through my system
> to find missing CPE's or APs that were on 6.0.4 Downgraded to 5.6.15 for
> them to be found as I
Understood. With the Prism’s handling multi-mode, have you considered that
option?
Rory
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On
Behalf Of David Jones
Sent: Friday, November 17, 2017 12:21 PM
To: Ubiquiti Users Group
Subject: Re:
Well for us it is because we are elevating our units. I also hate the
locked firmware at and after 6.0.6
On Fri, Nov 17, 2017 at 10:21 AM, Rory Conaway
wrote:
> Why are you still running 6.0.4?
>
>
>
> Rory
>
>
>
> *From:* ubnt_users-boun...@wispa.org
Why are you still running 6.0.4?
Rory
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On
Behalf Of Troy Gibson, Byhalia.net,LLC
Sent: Friday, November 17, 2017 5:31 AM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4
The beta works better.
On Thu, Nov 16, 2017 at 1:48 PM, Phil Curnutt wrote:
> AirControl2 2.0.3 is found on Ubnt.com, Support>Downloads>AirMax>Utilities.
> Your have choices of Linux or Windows10 Servers and Clients and Mac
> Clients. I found our 900 radios on 5.6.9, but