Just as a data point, we upgraded one of our towers to run sync in mixed mode a few weeks ago and it has performed flawlessly.
We are getting ready to roll sync out to the entire network (60+ APS). I will report on our progress. YMMV, JP On Fri, 17 Nov 2017 19:56:17 +0000, Rory Conaway wrote > Understood. With the [UTF-8?]Prismâs handling multi-mode, have you > considered that option? > > Rory > > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]On > Behalf Of David Jones > Sent: Friday, November 17, 2017 12:21 PM > To: Ubiquiti Users Group <ubnt_users@wispa.org> > Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices > > > Well for us it is because we are elevating our units. I also hate the locked > firmware at and after 6.0.6 > > > > On Fri, Nov 17, 2017 at 10:21 AM, Rory Conaway <r...@triadwireless.net> wrote: > > Why are you still running 6.0.4? > > Rory > > > From:ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]On > Behalf Of Troy Gibson, Byhalia.net,LLC > Sent: Friday, November 17, 2017 5:31 AM > > To: Ubiquiti Users Group <ubnt_users@wispa.org> > Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices > > > > Beta 6 or 7 still does not find 6.0.4. I have had to go through my system to > find missing CPE's or APs that were on 6.0.4 Downgraded to 5.6.15 for them > to be found as I was unsureof the higher 6.0 firmware at the time. > > > > > > > > Troy Gibson > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: RickG <rgunder...@gmail.com> > > Date: 11/17/17 4:51 AM (GMT-05:00) > > To: Ubiquiti Users Group <ubnt_users@wispa.org> > > Subject: Re: [Ubnt_users] aircontrol won't find 6.0.4 devices > > > > The beta works better. > > > > On Thu, Nov 16, 2017 at 1:48 PM, Phil Curnutt <pcurn...@gmail.com> wrote: > > AirControl2 2.0.3 is found on Ubnt.com, Support>Downloads>AirMax>Utilities. > Your have choices of Linux or Windows10 Servers and Clients and Mac Clients. > I found our 900 radioson 5.6.9, but not the one on 6.0.4, but I was able to > add the device manually using v 2.0.2. > > > > Phil > > > > On Thu, Nov 16, 2017 at 11:18 AM, Jan Van Kort <j.vank...@oregononline.net> > wrote: > > I had an earlier version of air control installed and gave up trying to make > it work over 2 years ago. Where do i go to get a current version of air > control so I can try it again? I'm wandering around theubnt.com website and > can't find it. Does the current version have the 6.04 issue? > > > On 08/31/2017 11:05 AM, James Craig via Ubnt_users wrote: > > Hi Guys, > > > > This is most likely due to this change in discovery in 6.0.4. We're adding > CGN address space in 6.0.7, so moving forward, you will only be able to > discover from RFC1918 and RFC6598address. IP range scanning should still work. > > >- Fix: Limit discovery response to queries from private subnets or multicast/broadcast > > > > On Thu, Aug 31, 2017 at 1:58 PM, Troy Gibson, Byhalia.net,LLC > <t...@byhalia.net> wrote: > > I'm on AC2.1 beta 7 and it won't find any 6.0.4 radios, XW or XM. I had some > being monitored on beta 6, so those are still monitored, but show in devices > not found column of discovery. TCP scan only showed prism radios too. > > > > I downgraded to 5.6.15 and it was discovered. I had to downgrade AP and CPE > for it to discover the devices on AC. Now to search for the missing radios!! > > > > > > Troy > > > > > > > > > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > > From: CBB - Jay Fuller <par...@cyberbroadband.net> > > Date: 8/31/17 1:25 PM (GMT-05:00) > > To: Ubiquiti Users Group <ubnt_users@wispa.org> > > Subject: [Ubnt_users] aircontrol won't find 6.0.4 devices > > > > > > Been reading all about it in the ubnt forums - but anyone have any > suggestions around this? > > > > Thought I'd post it here too - > > > > Haven't run aircontrol since about 18 months ago. About nine months ago I > attempted to upgrade to the then current beta but it basicallycorrupted my > database and would not even start the server service. Last night late I > started over again from scratch. Ran into the 6.0.4 problem as one of my > network segments (from a recent purchase) we have manually changed the ip > addresses and put themall on 6.0.4 > > > > > A different segment is still running 5.6.3. I was planning to move them all > to 6.0.4 and also make a mass change of the username / password. > > > > > > > > Left discovering overnight, found all the devices on 5.6.3 on that particular > network segment but did not find any 6.0.4 > > > > > > > > Today once googling and discovering this issue I downgraded an AP from 6.0.4 > to 5.6.3 and discovery found it immediately. > > > > > > > > I don't want to do this to 300 devices. > > > > > > > > Aircontrol v.2.0.2.2874.170719.18353 is running on a public IP within our > network. > > > > > > > > I tried to new feature tcp scan but no luck (probably because the server is > in public ip space). > > > > > I thought about temporarily changing the IP but then radios would be > reporting to the wrong IP. > > > > > > > > I can manually add the device but have not found a way to do that in bulk. > > > > > > > > I don't know if it is easier for me to upgrade to something higher than 6.0.4 > on all of my devices and use discovery or to manuallyadd 300+ devices. I am > hoping for another option. > > > > > > > > Bueller? Bueller? > > > > > > > > Thanks > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________Ubnt_users mailing listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > -- > > -RickG > > _______________________________________________ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > -- > > David Jones > NGL Connection > 307-288-5491 ext 702 Joe Portman Alamo Broadband Inc. www.alamobroadband.com
_______________________________________________ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users