Has there been any recent updates on this? I have a network setup with
tunnels between Cisco routers as the egress points for each remote site
and am having the same problems when attempting to SSH from a host
inside of one site to the other. Again, MTU related. I hope there is a
permanent fix
Has there been any recent updates on this? I have a network setup with
tunnels between Cisco routers as the egress points for each remote site
and am having the same problems when attempting to SSH from a host
inside of one site to the other. Again, MTU related. I hope there is a
permanent fix
Since the DF bit is set and PMTUD is being disobeyed, I discovered that
MSS is obeyed. Therefore, I resolved my problems by doing the overhead
math and setting the MSS adjust parameter on the LAN facing interfaces
of my routers. This workaround is definitely more scalable than
changing the
Since the DF bit is set and PMTUD is being disobeyed, I discovered that
MSS is obeyed. Therefore, I resolved my problems by doing the overhead
math and setting the MSS adjust parameter on the LAN facing interfaces
of my routers. This workaround is definitely more scalable than
changing the
I did some research and discovered a solution to my problem. I reloaded
the forcedeth module with msi=0 and msix=0. This solved my problem and
this issue no longer plagues me.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I'm having a similar issue running 12.04 with the Trusty hardware
enablement stack; kernel v3.13. I have the MCP51 controller and get
random protocol flaps even with the physical link still up. This causes
problems as I have an NFS auto mounted home directory. My only
workaround has been to
This will not fix a server environment where there is no GUI present
and, thus, no network manager. I think this goes deeper into the kernel
source itself.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Yes, I can confirm...see below.
[luke@Hades ~]$ dpkg -l linux-image-*-generic
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name
Oh, I should point this out, this is a server install -- no GUI. And
also is wired and not wireless.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/988183
Title:
Logs full with ICMPv6 RA:
Has this been pushed to the proposed repository yet? Just installed
12.04 and I am also having this problem. I also have said system up to
date with the proposed repository and still have this issue.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
I'm unsure if the root cause of this problem is within the kernel module
or NTP itself. However, using the same 'ntp.conf' over a wired
connection, it works as it is supposed to. When using the config over
the wireless, all peers are stuck in INIT. Changing servers does
I can also confirm the presence of this bug. I have been running the
same LDAP and NFS servers/setups since 2008. My LDAP and NFS servers
are running 8.04 and I have never had this problem until using 11.10 as
a client. This is also a fresh install and the posted workaround works;
however, I
This is also present in Linux Mint 12. Same workaround can be applied
as well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/870874
Title:
LDAP user with automounted nfs homedir cannot login
To
Not sure if this is related or if I am doing something wrong, but this
looks like it is also present in Lucid. I built a custom kernel to add
PPS support. The first version went well, however re-building with
newer (or older) source from the Git repos yields
'/proc/version_signature' to lie.
My
Also, in my script, I just add '+pps' to the kernel name...
2.6.x-y.z-[STRING]+pps
And the revision number is...
2.6.x-y.z~1
2.6.x-y.z~2
2.6.x-y.z~n ... and so on.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Oops, I ment...
2.6.x-y-[STRING]+pps
...not...
2.6.x-y.z-[STRING]+pps
for the kernel name.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/794698
Title:
hardy custom binary kernels have incorrect
Has there been any update on this? Any ETA?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/725138
Title:
linux: 2.6.24-29.87 -proposed tracker
--
ubuntu-bugs mailing list
Are packages still being built/mirrored? I can't install the new kernel
image due to unmet dependencies. Specifically ... 'linux-ubuntu-
modules-2.6.24-29'.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
So I haven't had any problems since switching to a non-OpenGL
screensaver and running v260.19.21. I can live with this. As long as
the screen locks, screensaver runs and compiz doesn't crash -- I'm
happy.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I'm having this same problem using the 'wl.ko' module for an Asus 1015PN
Netbook running Maverick.
In order to get SSH working at all, I first have to remove the module
altogether.
sudo rmmod wl
Then I connect via a wired connection and SSH works. If I leave the
module inserted and just
After extensive troubleshooting, I believe this to be a problem with the
driver. I have setup the same version of Ubuntu/SSH on an iBook G4
(using the Broadcom driver) and SSH works fine. The only difference is
the Broadcom chip-set version.
** Package changed: openssh (Ubuntu) = broadcom-sta
I'm having this same problem using the 'wl.ko' module for an Asus 1015PN
Netbook running Maverick.
In order to get SSH working at all, I first have to remove the module
altogether.
sudo rmmod wl
Then I connect via a wired connection and SSH works. If I leave the
module inserted and just
After extensive troubleshooting, I believe this to be a problem with the
driver. I have setup the same version of Ubuntu/SSH on an iBook G4
(using the Broadcom driver) and SSH works fine. The only difference is
the Broadcom chip-set version.
** Package changed: openssh (Ubuntu) = broadcom-sta
Clint, I appreciate your assistance with this but I am sorry to say that
I believe I've wasted your time.
I did some intensive digging on this and discovered that all signs point
to a hardware issue on one of the SCSI buses. MySQL appeared to be the
trigger; with the most disk writes/reads. It
Clint, I appreciate your assistance with this but I am sorry to say that
I believe I've wasted your time.
I did some intensive digging on this and discovered that all signs point
to a hardware issue on one of the SCSI buses. MySQL appeared to be the
trigger; with the most disk writes/reads. It
Clint, the last time this happened, I watched the system attempt to
reboot when issued from command line via console. It appears the reboot
sequence hangs on attempting to halt mysqld. As far as I can tell, I
belive something in conjuction with Cacti and MySQL is causing this
problem. It seems
Clint, the last time this happened, I watched the system attempt to
reboot when issued from command line via console. It appears the reboot
sequence hangs on attempting to halt mysqld. As far as I can tell, I
belive something in conjuction with Cacti and MySQL is causing this
problem. It seems
Clint, please see the attached file ps-auxwww.txt.
--
mysqld randomly causes system to not respond to commands
https://bugs.launchpad.net/bugs/621509
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to mysql-5.1 in ubuntu.
--
** Attachment added: ps-auxwww.txt
https://bugs.launchpad.net/ubuntu/+source/mysql-5.1/+bug/621509/+attachment/1579438/+files/ps-auxwww.txt
** Changed in: mysql-5.1 (Ubuntu)
Status: Incomplete = New
--
mysqld randomly causes system to not respond to commands
Also, when I renice the process, I get back enough response that
someitmes I do not need to hard boot it.
--
mysqld randomly causes system to not respond to commands
https://bugs.launchpad.net/bugs/621509
You received this bug notification because you are a member of Ubuntu
Server Team, which is
Clint, please see the attached file ps-auxwww.txt.
--
mysqld randomly causes system to not respond to commands
https://bugs.launchpad.net/bugs/621509
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Attachment added: ps-auxwww.txt
https://bugs.launchpad.net/ubuntu/+source/mysql-5.1/+bug/621509/+attachment/1579438/+files/ps-auxwww.txt
** Changed in: mysql-5.1 (Ubuntu)
Status: Incomplete = New
--
mysqld randomly causes system to not respond to commands
Also, when I renice the process, I get back enough response that
someitmes I do not need to hard boot it.
--
mysqld randomly causes system to not respond to commands
https://bugs.launchpad.net/bugs/621509
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Sadly, I just had a crash. :(
Although, it is very rare as compared to before. In fact this was the
only time I moved the mouse to wake it up. Every other time has been
via keyboard. Perhaps, once again, mouse movement has something to do
with it. I will test this out over the next few
Public bug reported:
Binary package hint: mysql-server
Once in a great while, my system becomes unresponsive to basic commands.
This includes background commands such as anything run under cron and
even syslog. I can still ssh to the machine, however any system level
commands fail to run, even
Thanks, Clint. Will do.
--
mysqld randomly causes system to not respond to commands
https://bugs.launchpad.net/bugs/621509
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to mysql-5.1 in ubuntu.
--
Ubuntu-server-bugs mailing list
It appears this version (v256.44) has fixed all my problems. I'll give
it another month to be sure, but I haven't had a single crash since my
last post!
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
https://bugs.launchpad.net/bugs/425160
You received this bug notification because
Public bug reported:
Binary package hint: mysql-server
Once in a great while, my system becomes unresponsive to basic commands.
This includes background commands such as anything run under cron and
even syslog. I can still ssh to the machine, however any system level
commands fail to run, even
Thanks, Clint. Will do.
--
mysqld randomly causes system to not respond to commands
https://bugs.launchpad.net/bugs/621509
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I upgraded to v256.44 tonight,...we shall see how it goes...
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
https://bugs.launchpad.net/bugs/425160
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Thanks again. Nope, no workaround other than not using compiz or not
using a screensaver. The latter I view as a security vulnerability, so
I guess I have to live with the crashing...compiz --replace does not
work either. :(
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
I hate sounding like a broken record, down talking the community and the
last thing I want to do is sound like an @$$hole, but this is sort of
what I wanted to here. That this IS confirmed as an issue with NVidia
and not and issue with compiz itself. If that is the case, that's all
someone had
Nice! Whoever made that call, we should break the cycle and name 11.04
after them. :)
--
libstdc++5 removal breaks non-ubuntu applications
https://bugs.launchpad.net/bugs/431091
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
You shouldn't have to revert to 32-bit or opt not to install a package
to get it to function properly. Although, your efforts will help in
locating where the problem is; the bottom line is someone needs to
acknowledge this and fix it. Someone obviously wrote the bad code and
needs to take
Really getting tired of this...why is it that no one seems to care or
help with this issue? I leave my machine on and it completely sucks
when I unlock my screen to discover compiz has crashed and all my
windows have been dumped to one screen. I then have to close
everything, logout, login and
Was cruising along for 10 days since my last reboot and it showed up
again, however, only once and the system is still stable.
[100375.580397] Kernel unaligned access at TPC[6a1504]
tcp_transmit_skb+0x1ac/0x8c0
[100375.580458] Kernel unaligned access at TPC[6a150c]
tcp_transmit_skb+0x1b4/0x8c0
I'm confirming this for Lucid. I just experienced a crash also on
10.04. It seems no one from the dev team would acknowledge this when it
was brought to attention as a problem with Karmic. Now, since we are on
an LTS, this NEEDS ATTENTION!!!
--
compiz.real crashed with SIGSEGV in
Looks like I was able to repair this issue via the resolution in bug
#386167. My username originally had a hyphen in it and I think that is
what was causing the problems logging into the Ubuntu wiki. I have
since changed it to one of the new names I used on the Ubuntu wiki and
it works fine now.
No, installed the driver straight from Nvidia. Still running Karmic as
Lucid will break a lot of things...waiting for at least 10.04.1 before
I upgrade.
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
https://bugs.launchpad.net/bugs/425160
You received this bug notification because
Had a crash the other day using 192.36.15. :(
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
https://bugs.launchpad.net/bugs/425160
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Hi Anthony,
Basically anything under: http://wiki.ubuntu.com/*
Upon login, I am prompted to continue with Open ID as cookies have saved
said information. I am then presented with the confirmation page asking
me to allow my email, userid, etc. to be used by wiki.ubuntu.com. I
then click yes
Nvidia driver 195.36.15 seems to be working so far. When coming out of
the screensaver it stalls for maybe 3-5 seconds, but I'll take that over
a crash. Can anyone else test this out?
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
https://bugs.launchpad.net/bugs/425160
You
Public bug reported:
Not sure if this is the place for this, but I cannot login to any Ubuntu
site using OpenID. Whenever I try, I always get the error that the
username is in use. I do as it says and create a new username with the
password field blank, however the next time I try to login with
Upgraded to 195.36.15 and all is going well so far.
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
https://bugs.launchpad.net/bugs/425160
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Chuck, your thoughts on this? Am I on to anything here with my previous
post?
--
snmptrapd v5.4.1 seems to have a memory leak much like snmpd in the previous
release
https://bugs.launchpad.net/bugs/380942
You received this bug notification because you are a member of Ubuntu
Server Team, which
Jeremy, is there anything you would like me to do in the mean time?
Like test a different kernel or similar?
--
Kernel unaligned access at TPC causing network/system to become slow and/or
unresponsive
https://bugs.launchpad.net/bugs/569610
You received this bug notification because you are a
Chuck, your thoughts on this? Am I on to anything here with my previous
post?
--
snmptrapd v5.4.1 seems to have a memory leak much like snmpd in the previous
release
https://bugs.launchpad.net/bugs/380942
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Any word on this? Is there an alternative to valgrind that can be used
on sparc?
--
snmptrapd v5.4.1 seems to have a memory leak much like snmpd in the previous
release
https://bugs.launchpad.net/bugs/380942
You received this bug notification because you are a member of Ubuntu
Server Team,
Found this bug which was fixed in v5.4.2...
http://sourceforge.net/tracker/?func=detailaid=1955227group_id=12694atid=112694
It might apply to this as my box in question is 64-bit also.
The current stable release of this train is v5.4.2.1...
http://www.net-snmp.org/download.html
** Bug watch
I did some searching and found these two entries in some kernel change
logs. I have no idea if it helps any but I figured it couldn't hurt to
ask...
~ ChangeLog-2.6.28 ~
11696 commit 33cf71cee14743185305c61625c4544885055733
11697 Author: Petr Tesarik ptesa...@suse.cz
11698 Date: Fri
** Attachment added: Kernel Change Log Entries
http://launchpadlibrarian.net/46867955/KernelChangeLogEntries.txt
** Changed in: linux (Ubuntu)
Status: Incomplete = In Progress
--
Kernel unaligned access at TPC causing network/system to become slow and/or
unresponsive
Also, marking this In Progress as I do not want LP Janitor to wipe it
out. I will need a bit of guidance on how to proceed seeing as I can
not simply install a deb package for the upstream kernel as I am using a
Sparc port. If someone could tell me which upstream version to try and
where to find
Oh and this is also a headless server install / no GUI.
As for the Apport command, how shall I go about running that so I don't
have to babysit the log files?
I read Apport is not enabled on stable releases by default. I've never
used it before either.
--
Kernel unaligned access at TPC
Any word on this? Is there an alternative to valgrind that can be used
on sparc?
--
snmptrapd v5.4.1 seems to have a memory leak much like snmpd in the previous
release
https://bugs.launchpad.net/bugs/380942
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Found this bug which was fixed in v5.4.2...
http://sourceforge.net/tracker/?func=detailaid=1955227group_id=12694atid=112694
It might apply to this as my box in question is 64-bit also.
The current stable release of this train is v5.4.2.1...
http://www.net-snmp.org/download.html
** Bug watch
Thanks for the quick response, Jeremy. Unfortunately, I cannot test the
latest development release image as this is a production system.
However, I can test the latest upstream kernel for you. I might also
add the current kernel I am running is 2.6.24-27.69. I poked around the
kernel upstream
Yes, I know this. What I was getting at is you cannot simply run the
command in a root shell since once you close the shell (aka logout) the
overrides get lost. You have to allow init to parse the command in
from 'rc.local' at boot time in order for it to stick. :)
--
Cannot disable console
Correction, this works in Hardy as well; for some odd reason, you just
need to reboot for it to take affect.
--
Cannot disable console blanking in /etc/kbd/config
https://bugs.launchpad.net/bugs/381517
You received this bug notification because you are a member of Ubuntu
Bugs, which is
*** This bug is a duplicate of bug 425160 ***
https://bugs.launchpad.net/bugs/425160
See bug: https://bugs.launchpad.net/ubuntu/+bug/425160
** This bug has been marked a duplicate of bug 425160
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
--
Compiz crashes on unlocking
Was searching for an answer to this problem since we were getting know
response from another bug and I stumbled upon this one. So I tagged the
bug I was working off of as a duplicate of this one.
https://bugs.launchpad.net/ubuntu/+bug/495121
I, as well as others, confirm this IS a problem.
**
** Changed in: dvdrip
Status: Confirmed = Fix Released
** Changed in: dvdrip (Ubuntu Karmic)
Status: New = Fix Released
** Changed in: event-execflow (Ubuntu Karmic)
Status: New = Fix Released
--
dvd::rip does not complete ripping of disc via gui in karmic
*** This bug is a duplicate of bug 425160 ***
https://bugs.launchpad.net/bugs/425160
Adding as duplicate of: https://bugs.launchpad.net/ubuntu/+bug/425160
** Changed in: nvidia-graphics-drivers-180 (Ubuntu)
Status: New = Confirmed
** This bug has been marked a duplicate of bug 425160
Tagged another as a duplicate:
https://bugs.launchpad.net/ubuntu/+bug/454057
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
https://bugs.launchpad.net/bugs/425160
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I'm currently running Nvidia's driver for this and still having an issue
(190.53). I'm going to upgrade to 195.36.15 tomorrow and test that out
and see how it goes.
--
compiz.real crashed with SIGSEGV in glXBindTexImageEXT()
https://bugs.launchpad.net/bugs/425160
You received this bug
The majority decision here is actually the proper one to take. At some
point in time, for all software, a decision has to be made when to deem
a package no longer supported it favor of its successor. I realize this
causes problems for some, however the individual packages that depend
upon said
Public bug reported:
Binary package hint: linux-image-2.6.24-27-sparc64-smp
These few lines kept showing up in dmesg/logs over the past few weeks
and then started to cause the system/network in question to become slow
and unresponsive leading to a hard reboot to remedy.
Apr 7 16:01:48 Hal
Ok, so Lucid is almost out which means Karmic is 1/3 through its life
cycle...and still no movement on this. I'm starting to lose faith in
this 18 months of support thing... Not, trying to get on anyone's bad
side, but it is very frustrating when you are plagued by a problem such
as this, go
Perhaps this might help? Ubuntu devs, please read. It looks as though
the driver is not at fault.
http://www.nvnews.net/vbulletin/showthread.php?t=144769
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a
Don't want to jinx it, but I haven't had a crash in ten days, and
counting...
Not sure, but this directly relates to the upgrade/installation of
gnome-screensaver_2.28.0-0ubuntu3.5 on my system.
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this
Looks like I did jinx it, just had another crash. :( I hope Lucid is
not plagued by this...
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I'm using driver version 190.53 as well.
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Here is a workaround I found on the Ubuntu forums. Credit goes to Dr
Small. I have confirmed this workaround works with Karmic and Lucid,
however the problem is still present in Hardy even after applying Dr.
Small's workaround. I don't know about Intrepid or Jaunty though.
Any word on this? Anyone?
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Now that this problem has been brought to the correct personnel, is it
possible to get some assistance with this? I have been plagued by this
ever since we got the bug fixed for the screensaver not starting by
itself after time out (#411350). If this will be or has been corrected
for Lucid it
Just had another crash. Could someone PLEASE acknowledge this?
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Many thanks, Travis!!! Wasn't looking for a fix, just someone
knowledgeable on the subject to point us in the right direction. Thanks
again!!! :)
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a member of
There was a recent gnome-screensaver update. Not that it addressed this
issue, but I am monitoring to see if I get a crash since then. Terrible
to say this, but I am glad more users are seeing this issue. Perhaps
now we can get some assistance on a possible workaround and/or fix.
--
Compiz
Well, it was a long run, but the mouse thing proved irrelevant. Problem
started happening again. Really starting to annoy. :( Is there not
anyone from the dev team that can setup and help us out?
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received
I'm not 100% sure, but I believe mouse movement has something to do with
it all. For the past week or so, I have been waking my machine by
hitting the escape key and so far have not had a crash since. If
possible, a few others should try this and see what their results are.
--
Compiz crashes
Nizar, doesn't help. All I get is just my desktop image, all my windows
go away. I still have to logout and log back in to remedy it. Also,
this bug only now shows itself because of this bug, #411350, being
fixed. Is there any debug commands I can run to assist in a fix?
Although not a major
Oh, I also upgraded to kernel 2.6.31-18 and install the most recent
drivers from nvidia, 190.53.
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
This is starting drive me nuts. Always having to close out my open
applications, logout and login to fix the issue.
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
I'm good with that. Since we have a patch and now have an idea of what
the root cause maybe, if we choose to pursue this issue it will be in a
package that dvd::rip depends on rather than in dvd::rip itself. Thanks
Jörn and all!
--
dvd::rip does not complete ripping of disc via gui in karmic
I can also confirm this bug. I have noticed compiz.real crashes with a
segfault in libglcore.so while system is under load with the screensaver
active. Judging from timestamps within the logs, it appears the crash
happens while the screensaver is active rather that upon unlocking it.
Again, I
Marking this confirmed as I was also able to replicate this on another
karmic machine.
** Changed in: compiz (Ubuntu)
Status: New = Confirmed
--
Compiz crashes on unlocking screensaver
https://bugs.launchpad.net/bugs/495121
You received this bug notification because you are a member of
So I did a rip of a unencrypted disc and it worked 100% fine -- no
errors at all. Jörn, your patch helps in that we do not have to re-
start dvd::rip. But after finding that an unencrypted disc works, this
leads me to think you may be on to something about the TOC, CSS and the
number of frames.
Black Trenchcoat, try this...
dpkg -l | grep execflow wget
http://mirrors.kernel.org/ubuntu/pool/universe/e/event-execflow
/libevent-execflow-perl_0.64-0ubuntu1_all.deb sudo dpkg -i libevent-
execflow-perl_0.64-0ubuntu1_all.deb dpkg -l | grep execflow
You should see v0.63 installed before
I've had a lot of people sending me thank you mail in regards to my
tutorial to fix this...
http://www.digitalenigma.net/directory.php?include=archivesmsgid=2009111000
And a lot of which have been Lexmark printers. Going forward, I would
like to see this package re-instated into the
I can confirm this is an issue as well in both Jaunty and Karmic.
--
Cannot disable console blanking in /etc/kbd/config
https://bugs.launchpad.net/bugs/381517
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Oh, and also Hardy...
--
Cannot disable console blanking in /etc/kbd/config
https://bugs.launchpad.net/bugs/381517
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
1 - 100 of 158 matches
Mail list logo
