** Changed in: xorg (Ubuntu)
Status: Incomplete = New
--
HP vs15 monitor will not scan at 60hz as required
https://bugs.launchpad.net/bugs/238132
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I took out the phillips souncard and switched back in setup to the built
in souncard on the motherboard and hey presto i have sound
--
there has been no sound since fresh install
https://bugs.launchpad.net/bugs/113644
You received this bug notification because you are a member of Ubuntu
Expected settings: [EMAIL PROTECTED]
Obtained: [EMAIL PROTECTED],51,52 or 62hz.
===
Relevant output of /etc/X11/xorg.conf:
Section Device
Identifier nVidia Corporation C51 [GeForce 6150 LE]
Boardname nv
Busid PCI:0:5:0
Driver
the Applications/System Tools menu. I was
able to reboot the computer without freezing up and am feeling
optimistic about my future with the Hardy Heron.
I will report back after a couple of days.
Wayne
--
Ubuntu 8.04 RC + NVIDIA binary drivers = often crash/freeze
https://bugs.launchpad.net/bugs/220119
You
Phew! That was close!
I was being all arrogant in thinking that my issues had come to an
end... Reinstallation of the NVidia drivers by EnvyNG appears to have
helped little - it froze up completely again.
--
Ubuntu 8.04 RC + NVIDIA binary drivers = often crash/freeze
I attempted to run with the proprietary NVIDIA drivers shut off, but
still got crashes.
It is possible as beefcurry wrote that the crashes were less frequent,
but I can't swear to it. I haven't been able to discern a pattern in the
crashing, so I'm uncertain if there was a change in it.
im running a dell pc with a phillips psc 703 soundcard.it worked with
windows but ive no system sound of any kind.new to ubuntu .please
help?
--
there has been no sound since fresh install
https://bugs.launchpad.net/bugs/113644
You received this bug notification because you are a member of
I have been having this difficulty since 8.04 upgrade as well. I'm also
on an hp tc1100 tablet pc with 1.5 Gb ram.
I have been using the proprietary NVIDIA drivers. I just disabled them
and will post back if there is no success with that.
Any help or recommendations would be greatly appreciated.
.
--
---
Wayne from Gmail
** Attachment added: unnamed
http://launchpadlibrarian.net/15410408/unnamed
--
segfault when splitting window
https://bugs.launchpad.net/bugs/227263
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
is there any work around? you are not telling me to 'too bad, you are
screwed' are you?
thanks
On Tue, Jun 17, 2008 at 5:17 AM, Chris Jones [EMAIL PROTECTED]
wrote:
Wayne: No, this isn't affecting all Ubuntu 8.04 users - I run Terminator
on two 8.04 machines. one was a fresh install, one
So u r saying all users with ubuntu 8.04
Has this problem?
Sent from my cell phone
I'm going to mark this bug as Invalid for terminator because I think
it's a bug in vte. Even if we are doing something wrong, this shouldn't
segfault in a C library. Added vte as an affected distribution package
cant get any higher resolution than 600x400 after upgrade. its sees
nvidia accelerated graphics card. installed and uninstalled and no
change.
** Changed in: ubuntu
Status: New = Invalid
** bug changed to question:
https://answers.launchpad.net/ubuntu/+question/36281
--
ant get more
Public bug reported:
The settings only offer 51,52 or 62 hz.
** Affects: ubuntu
Importance: Undecided
Status: New
--
HP vs15 monitor will not scan at 60hz as required
https://bugs.launchpad.net/bugs/238132
You received this bug notification because you are a member of Ubuntu
Chipset
GeForce 6150 LE / nForce 430
Motherboard
Manufacturer: Asus
Motherboard Name: A8M2N-LA
--
HP vs15 monitor will not scan at 60hz as required
https://bugs.launchpad.net/bugs/238132
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Monitor detected as plug 'n' play
--
HP vs15 monitor will not scan at 60hz as required
https://bugs.launchpad.net/bugs/238132
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
i've been playing around with hardy proposed and hardy backports
modules.
i've noticed that there are two different versions of the module (at
least).
using modinfo rt2500pci there seems to be a 2.0.10 version and a 2.1.5
version
the 2.0.10 version seems to work better for me.
I think 2.1.5 is
I also noticed this subtle difference between x.03 and x.06, and this
too was preventing macros running in open office calc 2.4 under Ubuntu
8.04. I created a link in /usr/lib/jvm from java-6-sun-1.6.0.03 to
java-6-sun-1.6.0.06 using nautilus as root, and wella, everything works.
If open office is
Some short comments:
- This is definitely a regression. In Gutsy (even Feisty!) there was a
reliable version of the driver. In Hardy there is a crappier version
related to the code that was merged into the main linux tree. I quote
from the front page rtx00 upstream web site:
rt2x00 enters
my second dot point I should have said gutsy instead of hardy.
My point is gutsy had a better rt2500pci than hardy, all because of the
chronological accident of hardy locking in on a kernel version that had
a temporarily bad merge of the rt2x00 tree.
--
[Hardy] Low bandwidth with rt2400 /
Try updating the mythweb.conf file in /etc/apache2/sites-enabled instead
of /etc/mythtv
--
Mythweb Database Access Denied
https://bugs.launchpad.net/bugs/224530
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Public bug reported:
Binary package hint: update-manager-core
When following the instructions here
http://www.ubuntu.com/getubuntu/upgrading#head-
db224ea9add28760e373240f8239afb9b817f197
To upgrade a 64bit Dapper Server and you are using the GB mirrors the
attempt to install
I'm running Hardy 8.04, upgraded from Gutsy 7.10.
Problems do occur exactly as described.
I'm using Firefox 3.0b5, Thunderbird 2.0.0.12, scim-anthy-1.2.4
here's the output of sudo im-switch -l
Your input method setup under en_US locale as below.
Public bug reported:
Binary package hint: nut
First off /etc/default/nut is fine.
After boot upsd is not started:
[EMAIL PROTECTED]:~$ ps -A |grep ups
5077 ?00:00:00 cupsd
5467 ?00:00:00 upsmon
5468 ?00:00:00 upsmon
I believe this is why:
[EMAIL PROTECTED]:~$ sudo
Confirmed, this is also true in the upcoming Hardy release, even less
excuse there as the G15 tools are available as packages from the Hardy
repositories.
I think what is happening is that the package maintainer does not have
the G15 build dependencies satisfied as lcdproc will just skip any
I have also run into this problem. Same as BrianPeiris I've tried both
Desktop and Alternate installers.
--
Hardy Heron Alpha unable to boot in Virtual PC 2007
https://bugs.launchpad.net/bugs/183517
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Ok, scratch that.
By changing the boot parameters by adding vga=771 before the double
dash, I was able to get into the alternate installer.
--
Hardy Heron Alpha unable to boot in Virtual PC 2007
https://bugs.launchpad.net/bugs/183517
You received this bug notification because you are a member
Thanks for the quick reply Sebastien!
In my case the servers hosting the shares I have tried to connect to are
running MS Windows 2000 Advanced Server.
I have this same issue on three different computers all upgraded to
Hardy from Gutsy.
I didn't file a bug report sooner because I just figured
I have the same issue running Hardy 8.04 beta. I have had the problem
since Hardy Alpha. I upgraded from Gutsy.
I can access public SMB shares via Nautilus OK.
When trying to access a password protected share I get the error message
that says:
Can't display location smb://server/share/
The
*** This bug is a duplicate of bug 145735 ***
https://bugs.launchpad.net/bugs/145735
Public bug reported:
Binary package hint: deluge-torrent
Crash after gutsy-hardy beta upgrade, previously stable
ProblemType: Crash
Architecture: amd64
Date: Sat Apr 12 13:16:06 2008
DistroRelease: Ubuntu
*** This bug is a duplicate of bug 145735 ***
https://bugs.launchpad.net/bugs/145735
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/13413393/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/13413394/ProcMaps.txt
** Attachment
A second issue closely related to this and bug #118793, smarty-gettext
places block.t.php in /usr/share/php/smarty/libs/plugins/, rather than
/usr/share/php/smarty/plugins/, causing {t} to be an unknown tag in
gosa's setup.
--
gosa: vanilla installation results in Call to undefined function
Public bug reported:
Binary package hint: gcompris
using ubuntu 7.10 all updates, intel mac mini hardware,
/etc/X11/xorg.conf:
Section Device
Identifier Intel Corporation Mobile 945GM/GMS, 943/940GML Express
Integrated Graphics Controller
Driver intel
(this is
Brian, my apologies. You are right, I did mean to say that I am running
7.10 with all updates.
Actually this printer used to work perfectly under 5.10 (a few years ago
now!)
--
Powersave causes cups to disable my HP LJ 2300 usb printer
https://bugs.launchpad.net/bugs/190048
You received this
would this bug also be causing the gnome-panel to keep putting my panel
applets in the wrong place, even when they are locked?
--
Compiz trouble with monitor geometry
https://bugs.launchpad.net/bugs/137818
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
this is definitely fixed now :)
** Changed in: synaptic (Ubuntu)
Status: Confirmed = Fix Released
--
synaptic panel applet shouldn't require password to see the updates
https://bugs.launchpad.net/bugs/32205
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
Binary package hint: cupsys
My system: HP LaserJet 2300, Ubuntu 5.10 with all updates, on a 2007
Intel Mac Mini
Whenever the computer goes into powersave mode, it comes back and the printer is
disabled. You have to click on System-Administration-Printing-Policies-Stat
e to
Public bug reported:
Binary package hint: heartbeat-2
The heartbeat-2 information for Feisty is as follows.
heartbeat-2/feisty uptodate 2.0.7-2
Please update heartbeat in feisty to 2.1.2 minimum. The development team behind
heartbeat said that 2.0.7 is not supported and shouldn't be used in a
Public bug reported:
Binary package hint: sound-juicer
It works just fine but it will pop up anytime even when I am in the mail
program with a list of tracks that are checked and not cd in player.
ProblemType: Bug
Architecture: i386
Date: Sun Feb 3 18:57:08 2008
DistroRelease: Ubuntu 7.10
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/11748193/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/11748194/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/11748195/ProcStatus.txt
--
It works
Albert's comment fixed it my Mac Mini problem with a single LCD monitor.
I have a new Intel Mac Mini with an Intel GMA 950 graphics card.
System-Administration-Screens and Graphics indicates Gutsy is using
the intel experimental modessing driver for the Intel 945.
It all seems to work okay
Public bug reported:
Binary package hint: avarice
avarice works with the AVR-Dragon. The avarice.rules file
should have another entry of the form:
# Atmel Corp. AVR-Dragon
SYSFS{idVendor}==03eb, SYSFS{idProduct}==2107, MODE=660, GROUP=dialout
Shouldn't this file be down in /etc/udev/rules.d
This bug initially manifested itself when I tried to empty trash. It
now shows up when fetching mail. At times I receive the same email
several times. Is Ubuntu a real program or do I have to go back to
Windows so if there is a problem it gets fixed. The mess with email is
not a joke. Is it
to a
halt. I'm not a computer geekI use my computer as a tool for my
work. Ubuntu is a tool and not an end in itself.
Wayne
On Sun, 2007-12-09 at 09:55 +, Sebastien Bacher wrote:
*** This bug is a duplicate of bug 27014 ***
https://bugs.launchpad.net/bugs/27014
Thanks for the bug
In addition to the message in a box I sent you in my last email I get
the following:
Summary and folder mismatch, even after sync.
Please send some sort of reply so I'm sure the email is getting through.
My email trash is so full its about to burst and drown me in bits and
bytes.
Thanks, Wayne
this is of help. If it's not enough, more explicit instructions
will be needed.
Thanks,
Wayne
On Wed, 2007-11-21 at 18:36 +, Pedro Villavicencio wrote:
Thanks for your report, can you run evolution from the command line like
CAMEL_DEBUG=all evolution evo.log and attach that file
Public bug reported:
Binary package hint: evolution
I'm up to date on all Ubuntu changes. Tryed to empty email trash several
times. Received an error message on some attempts. something about
syncronizing files. Re-booted and still didn't work. Trash shows 645 deleted
but they are still
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/10496770/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/10496771/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/10496772/ProcStatus.txt
--
Can't empty
Public bug reported:
Binary package hint: heartbeat-2
After a few little glitches in heartbeat everything came to a cataclysmic end
yesterday. It turns out that my one server had about 40 heartbeat processes
running
simultaneously.
1.
root 341 0.0 0.0 0 0 ?
My changes made it into the CVS version of glipper (with a couple
strange omissions that I need to ask them about). But that does mean
that the maintainers of glipper approve of the method used in the patch.
--
Glipper makes copy/pasting of images in OpenOffice impossible
Same problem here.
Im on a fresh install of Ubuntu 7.10 with KDE installed
--
keep getting notifications of new distribution, though i am at the newest
https://bugs.launchpad.net/bugs/156088
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
Public bug reported:
Binary package hint: glassfish
I've looked around and can't find it. Is this on purpose?
** Affects: glassfish (Ubuntu)
Importance: Undecided
Status: New
--
glassfish has no startup script
https://bugs.launchpad.net/bugs/150960
You received this bug
This seems to work ok.
** Attachment added: glassfish
http://launchpadlibrarian.net/9898415/glassfish
--
glassfish has no startup script
https://bugs.launchpad.net/bugs/150960
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
I will test and let you know
Reproducible... Yes.
On 10/3/07, Pedro Villavicencio [EMAIL PROTECTED] wrote:
Questions from upstream:
Was this bug reproducible?
What evolution/gnome-pilot packages were installed?
Does the bug go away if you disable the evolution address conduit?
**
no, the problem is resolved.
On Fri, 2007-07-09 at 23:17 +, Nanley Chery wrote:
Does this still happen in Feisty Final?
--
open-office update fails to install
https://bugs.launchpad.net/bugs/104716
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
here is the valgrind log mentioned in the bug description.
While logging, I let the gnome-terminal exhibiting the symptoms run for
approximately 1 minute after it locked up, hoping it would close or
finish on its own. After no such luck, I killed it, and the gnome-
terminal running valgrind was
I have been seeing the same symptoms. I was at first unable to
reproduce it reliably, but I found that button-mashing (like repeating
the home keys: asdf;lkj) while in unicode-input mode (scim) would
crash it quickly. Actually, it doesn't crash, it just locks up. I have
to then kill it manually
7.04
Package: firefox 2.0.0.4+1-0ubuntu1
PackageArchitecture: i386
SourcePackage: firefox
Uname: Linux wayne-desktop 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007
i686 GNU/Linux
** Affects: firefox (Ubuntu)
Importance: Undecided
Status: New
--
cannot connect with my lan camera
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/8409791/Dependencies.txt
--
cannot connect with my lan camera, message cannot connect to server.
https://bugs.launchpad.net/bugs/125172
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
K, stupid me. This doesn't affect shorewall. My startup script is as follows.
# start the firewall
shorewall_start () {
echo -n Starting \Shorewall firewall\:
wait_for_pppd
$SRWL start $INITLOG 21 echo done. || echo_notdone
/usr/sbin/fetchipac -S
return 0
}
and so I was getting the
Heres a me too comment, I have the same problem on two servers.
To answer the question my datadir is /var/lib/mysql.
--
MySQL relay logs are saved in volatile filesystem /var/run
https://bugs.launchpad.net/bugs/119271
You received this bug notification because you are a member of Ubuntu
Bugs,
Heres a bug I found on Mysql's site. The version numbers not the same
but the symptoms are.
http://bugs.mysql.com/bug.php?id=28850error=lp
--
MySQL relay logs are saved in volatile filesystem /var/run
https://bugs.launchpad.net/bugs/119271
You received this bug notification because you are a
my xorg.conf
(i have added the nvidia binary driver - but obviously the bug was with
the original fresh install with the nv driver)
** Attachment added: xorg.conf
http://librarian.launchpad.net/7734242/xorg.conf
--
feisty fresh install fails to setup 1440x900 nvidia
/var/log/Xorg.0.log
** Attachment added: Xorg.0.log
http://librarian.launchpad.net/7734247/Xorg.0.log
--
feisty fresh install fails to setup 1440x900 nvidia
https://bugs.launchpad.net/bugs/115220
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
Public bug reported:
this is a fresh install of feisty
i'm a long time ubuntu user
the default was some squarish resolution
but i have a 1440x900 monitor
the bug is that option wasn't in the list under
System-Preferences-Screen Resolution
I did:
sudo vi /etc/X11/xorg.conf
There are a whole
Thanks, Kevin. I removed it just now and did a search, but found and
installed python-dictclient 1.0.3. No errors now. I think a recent
change to my repositories found the correct critter this time.
Question to whomever:
Am I authorized to list this bug as resolved?
--
[apport] package
Thanks for the quick response. Any guidance will be appreciated.
FYI, any update-manager or apt-get upgrade gives an error:
:~$ sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0
Public bug reported:
Doing partial upgrade from Ubuntu 6.10 to 7.04.
ProblemType: Package
Date: Sun Apr 22 09:35:09 2007
ErrorMessage:
ErrorMessage: subprocess post-installation script returned error exit status 1
Package: python-dictclient
SourcePackage: dictclient
** Affects: dictclient
** Attachment added: Requested attachment for troubleshooting
http://librarian.launchpad.net/7386910/term.log
--
[apport] package python-dictclient failed to install/upgrade:
https://bugs.launchpad.net/bugs/108940
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: Requested attachment for troubleshooting
http://librarian.launchpad.net/7386888/apt.log
--
[apport] package python-dictclient failed to install/upgrade:
https://bugs.launchpad.net/bugs/108940
You received this bug notification because you are a member of Ubuntu
Bugs,
I have created a patch for glipper 0.95.1 that fixes this problem as
several others that I discovered. If anyone is interested, you can grab
it here:
http://opencoder.net/glipper-fixes.patch
It mentions all the fixes at the start of the patch. (I also reported
this to the glipper project on
my var/log/dist-upgrade contains two files. One, term-log, contains no
information. The other, apt.log, contains information, and I am
attaching it.
I don't know if it matters, but I manually fixed the problem by
following instructions I found on ubuntuforums.org. Do you need to know
the steps
For those wanting to build the package, this command will install the
build-dependencies:
apt-get build-dep glipper
I added a change to the debian/changelog to the patch to make it
easier to build a new .deb package from the source (and the patch now
requires the -p1 option, not -p0). For
** Attachment added: _usr_bin_hardinfo.1000.crash
http://librarian.launchpad.net/7377836/_usr_bin_hardinfo.1000.crash
--
hardinfo crash
https://bugs.launchpad.net/bugs/103857
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
I also have the same problem with my Nokia 6233 on Edgy.
The device is found and visible via USB.
However transferring files from the phones card onto the PC fails.
(sometimes I will get a partial file, or very rarely I'll get one file out of
n...)
Most time, I get a message telling me that its
This bug is caused by some incorrect logic when the checkClipboard()
function calls the processContent() function (both in src/main.c). If
the call to gtk_clipboard_wait_for_text() returned a NULL (because the
clipboard item could not be changed into plain text), the NULL gets
passed to
This is happening to me too. Very freaky to have the whole screen
switch into kanji, or corrupt in weird ways.
** Changed in: aptitude (Ubuntu)
Status: Unconfirmed = Confirmed
--
corrupts the terminal
https://bugs.launchpad.net/bugs/88987
You received this bug notification because you
blacklisting rt2570 had no effect
--
wpa issues in ndiwrapper
https://bugs.launchpad.net/bugs/102393
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[EMAIL PROTECTED]
I blacklisted the first two, I didn't blacklist the third. (didn't know it
related to my situation). I will and let you know if anything changes.
On 4/13/07, Matthias Mailänder [EMAIL PROTECTED] wrote:
Did you blacklist the rt2500, rt2500usb, rt2570 kernel modules?
This has not been a bug in my household since 1999.
We have several pc's and cannot reproduce this bug at all.
Please close.
--
Microsoft has a majority market share
https://bugs.launchpad.net/bugs/1
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
I had a similar problem. For me, it had to do with .gnome2/session. I
had the session manager saving my session by default on logout, and I
think that when I logged out with certain programs running, firefox at
least, it somehow corrupted the file. Deleting .gnome2/session through
a text
Public bug reported:
I've remapped the win-key to hyper to make it more useful to me, and
while some of the keyboard shortcuts that I've set up with it work, for
instance for metacity, the shotcuts that are apparently managed by the
gnome-settings-daemon don't appear to work with that remapping.
This is the same as Bug #16815. Sorry for the duplication.
--
Hyper win-key mapping not recognized by . . . gnome-keybindings?
https://bugs.launchpad.net/bugs/105679
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
I can confirm that this is still a bug in Edgy 6.10 and Feisty 7.04
--
Metacity catching mod4 but not gnome
https://bugs.launchpad.net/bugs/16815
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: lcdproc
Arch: Only reproduced on X86-64 so far, there is at least one other
reported instance of this on the Ubuntu forums
Ubuntu Edgy with lcdproc 0.5.0-1 (i.e most current package), same
configuration worked on previous Dapper release on the same
Sorry meant Parallel hd44780 is not USB
--
lcdproc segfaults with hd44780 driver
https://bugs.launchpad.net/bugs/105689
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
this solution is good
for most users they will have no other mysql applications and have no
root password set, it will just work.
for more advanced users they will have a root password and will have to
figure it out what it is
this solution rewards the most common use case and puts the burden
Public bug reported:
When updating Feisty beta, I get error messages. I am attaching the
final dialogue box which is generated by the graphical update-manager.
The error message has been appeared for two days now. I can install
additional packages and updates, but each time, the I get the same
** Attachment added: error message
http://librarian.launchpad.net/7222146/error%20message
--
open-office update fails to install
https://bugs.launchpad.net/bugs/104716
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
** Attachment added: dh -h
http://librarian.launchpad.net/7222147/dh%20-h
--
open-office update fails to install
https://bugs.launchpad.net/bugs/104716
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing
Public bug reported:
Binary package hint: hardinfo
/var/crash/_usr_bin_hardinfo.1000.crash
** Affects: hardinfo (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
hardinfo crash
https://bugs.launchpad.net/bugs/103857
You received this bug notification because you are a member
Public bug reported:
I am using ndiswrapper 1.38 with Feisty 7.04. Using a Belkin pcmcia wireless
card with a rt2500 chip and driver.
ndiwrapper -l shows the driver and hardware present
I can connect on an open network, but not using encryption
** Affects: ndiswrapper (Ubuntu)
I should add that wpa has worked intermittently. When I first installed
and configured ndiswrapper, I had wpa until I rebooted. Then, it would
only connect on an open network. WEP was given as a configuration
option, but even if I changed the encryption on the router to WEP, ndis
does not
well the problem is that mysql has its own little world of usernames and
passwords and privileges
there are security issues if applications can get mysql root access to
easily
but i agree it is a bug and needs to be solved somehow, even if we
simply provide instructions on how to set a mysql
yes that is how I did it also
the problem is if they are already using applications with mysql, they
probably already have a root password set
but possibly it could assume there is no root password, set it, and then
if that fails ask the user for the root password
mysql permissions are
Public bug reported:
Binary package hint: ubiquity
traceback(most recent call last):
file/usr/bin/ubiguity,line166,in ?main( )
,line 161,in main install(sys.argv[1]
,line 57 , in install ret=wizard.run( )
I was able to get wlan working under generic by:
sudo cp /sbin/ipw3945d-2.6.17-10-386 /sbin/ipw3945d-2.6.17-10-generic
--
wlan not working under generic works under i386 kernel
https://launchpad.net/bugs/79472
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Public bug reported:
Notebook used: Acer TravelMate 4235, 1 Gig RAM 160GB HD. Nvidia driver
used and is ok on both kernels (8776)
wlan detected and successfully used when booting i386 kernel as setup by
Ubuntu installer.
wlan not detected (no eth1 device available on desktop) when booting
I hit this exact same problem. Today. Jan 6th 2006.
It seems you need to have mysql-server preinstalled and preconfigured
and already know what your root password is.
--
Mythtv won't install
https://launchpad.net/bugs/41339
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I believe the problem was in my .asoundrc
I deleted my .asoundrc and then reconfigured alsa and it works
This is NOT because my .asoundrc was wrong in dapper.
It is just that the alsa hda-intel drivers are changing rapidly between
versions of alsa.
So I think what happened is what alsa put in
I had a similar problem with my HP LJ 2300 when I upgraded from dapper
to edgy (actually it was a fresh install).
I wonder if there is a problem with cups trying to use the hp specific
drivers, rather than the generic usb/post script stuff.
My printer wasn't working when it had the hp:/ URI, but
1101 - 1200 of 1207 matches
Mail list logo
