Trusting the upstream dev Povilas on this. :)
** Changed in: sane-backends (Ubuntu)
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE
This bug should be closed, it was fixed in upstream sane-backends long
ago.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the
Just a note that Canon LiDE 210 scanner has worked perfectly for me in
both Ubuntu 18.04 and 20.04, out of the box with the included Document
Scanner (3.36.3) program, without having to install programs or drivers.
It just works.
--
You received this bug notification because you are a member of U
I can just report my own experience. As described in my previous
comments, in Mint 17 (based on Ubuntu Trusty) I had to replace the
built-in driver with one compiled from source to be able to use this
scanner. I used sane-backends-git20141102 and I lived with it for some
years with almost no proble
I am truly sorry to have been silent for so long.
At this point, I can't do more than ask you to verify if this is still a
problem with bionic and/or cosmic. I'm hoping it's fixed in a later
release and then we can hopefully backport a fix.
--
You received this bug notification because you are
I agree that this is a pretty serious issue (certainly for those
affected), with it being capable to destroy hardware, etc.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 11
I've just been testing this and it seems that sane / driver doesn't
check for the end of track correctly when returning the scanner element
to the start of the track after a scan.
This means that the scanner element gets rammed into the start of the
track and you can hear the motor screaming in pa
Markus, can you test it on bionic?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage notifications about
I can confirm that the problem persists for my Canon DR-2580 which works
perfectly fine with ehci in Ubuntu 16.04 but can only scan a single page
using xhci on Ubuntu 16.04 (tested on different machines: the first has
a USB 2 port, the second one doesn't and connecting using a USB 2 cable
doesn't h
ping jeekajo
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage notifications about this bug go to:
https:
@jeekajo Can you please let us know if you can verify this problem in
zesty or later?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to r
halfgaar / Rolf Leggewie, unfortunately, I wasn't aware that apport
(i.e. ubuntu-bug) doesn't presently work for sane-backends, and I've
filed https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1656599
about it. My bad.
--
You received this bug notification because you are a member of Ubuntu
B
bug 1532292
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage notifications about this bug go to:
https:/
bug 1532582 and bug 1184699 both talk about scanning to work for only a
single page
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to rep
** Changed in: sane-backends (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the
Just ignore whatever Christopher is doing. People were already making
progress and preparing patches. No need for him to step in and get
things diffused in all kinds of unproductive directions. I rather
suggest to
1) verify if this is fixed in zesty (I will take what jeekajo is seeing for
this
halfgaar, it will help immensely if you filed a new report via a terminal:
ubuntu-bug sane-backends
Please feel free to subscribe me to it.
For more on why this is helpful, please see
https://wiki.ubuntu.com/ReportingBugs.
--
You received this bug notification because you are a member of Ubuntu
To pitch in; I use that rolfsbensch PPA, version
1.0.26-git20160803-trusty1; that is newer than their newest release of
1.0.25 (which is 11 months old...). What version does Ubuntu daily have
now?
In any case, I'm still having issues with my LiDE 110, so this problem
is likely not resolved. It mos
jeekajoo, to see if this is already resolved in Ubuntu, could you please
test http://cdimage.ubuntu.com/daily-live/current/ and advise to the
results?
** No longer affects: sane-backends (Ubuntu)
** Project changed: simple-scan => sane-backends (Ubuntu)
** Changed in: sane-backends (Ubuntu)
With the PPA from #27, it's still not working correctly for me.
System:Host: melk Kernel: 3.19.0-32-generic x86_64 (64 bit) Desktop: KDE
Plasma 4.14.2
Distro: Linux Mint 17.3 Rosa
Machine: Mobo: MSI model: H170A PC MATE (MS-7971) v: 2.0 Bios: American
Megatrends v: B.50 date: 01
Thanks @brulaz, after updating the drivers I can scan more than one time
with my Canon LiDE 210 scanner, and the scanner no longer "disappears".
See comment #27.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.ne
Canon Lide 210 stopped working in Ubuntu 16.04. It worked fine in 14.04.
https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1588878
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Titl
pls assist in fixing oour scanner not ablt to use after upgrading from
13.04 to 14.04..TY!
** Changed in: sane-backends (Ubuntu)
Assignee: (unassigned) => suntek (amtecson)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https:/
Version 1.025-git is now working fine for me as well. Thanks!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To
Martin, it might be good to wait for more feedback before closing this.
I suspect that different people may be seeing different issues, and that
some might still have problems. And in defence of upstream, a short
sleep does seem reasonable to me when dealing with timing issues in
black box externa
It is, thanks Michael! Yay for "fixing" timing issues with sleep :/ (but
not your fault, of course).
Uploaded.
** Changed in: sane-backends (Ubuntu)
Status: Confirmed => Fix Committed
** Changed in: simple-scan
Status: New => Invalid
--
You received this bug notification because
Is this alright?
** Patch added: "Fix timing issues on USB3 or fast recent hardware. Back-port
from upstream."
https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1184699/+attachment/4465857/+files/usb3_timing_fix.debdiff
--
You received this bug notification because you are a mem
Michael,
Could you please prepare a whole debdiff for sponsoring that includes
your patch, along with the required changes to debian/changelog and
debian/patches/series?
Thanks!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https:/
Upgraded to Wily, rebuilt with above patch and tested that simple-scan
works with patch.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need t
The attachment "This patch should fix the problems described in this
ticket for at least two users." seems to be a patch. If it isn't,
please remove the "patch" flag from the attachment, remove the "patch"
tag, and if you are a member of the ~ubuntu-reviewers, unsubscribe the
team.
[This is an au
Here is a patch against Wily containing upstream commits 09daef4 and
425edc7, which fix the issue for me and Freudi74. I don't have a chance
to test this properly just now. If anyone else does, please do (see the
Ubuntu process<1>, as pointed out to me on #ubuntu-bugs).
<1> https://wiki.ubuntu.c
Tested with GIT sane 1.025 git, commit
425edc705e6323353bf99f58c277dc4f0fe47deb
Fixes it for me on my 110.
also see:
https://alioth.debian.org/tracker/?func=detail&atid=410366&aid=314832&group_id=30186
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subsc
This may be fixed by commit 09daef4<1> to sane-backends. I tested a
similar fix locally (actually just adding a pause using the debugger)
and it worked for me.
<1> http://anonscm.debian.org/cgit/sane/sane-
backends.git/commit/?id=09daef4a681e43a411b14389ceee9292ffbc29fc
--
You received this bug
See this message[1] to the sane-devel list and the follow-up[2].
[1] http://lists.alioth.debian.org/pipermail/sane-devel/2015-July/033604.html
[2] http://lists.alioth.debian.org/pipermail/sane-devel/2015-July/033606.html
--
You received this bug notification because you are a member of Ubuntu
Bu
Version 1.025-git does not fix the issue for me. ubuntu 14.04
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To
Version 1.025-git is now working fine for me. Thanks!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage n
Does not fix it for me. Same behavior.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage notifications ab
Version 1.025-git fixed it for me.
See:
https://bugs.launchpad.net/~rolfbensch/+archive/ubuntu/sane-git/+index?field.series_filter=utopic
and do this:
sudo add-apt-repository ppa:rolfbensch/sane-git
sudo apt-get update
sudo apt-get upgrade
--
You received this bug notification because you are
Also hit the same issue with a Canon MP270...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage notificat
Same issue here, It appears that after I scan one time it switches the
source of the scan to another scanner on my network. The LiDe goes
missing from the list. I am also using Simple Scan.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubunt
See also bug #40682 (and note comment 21).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage notification
I also have a Lide 110 that won't work the second time (bought it
because my old Lide 25 broke on USB3 and the 110 was rated as 'complete
support'). Sane-utils 1.0.23-3ubuntu3.1. I have Mint 17.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I opened the following bug against SANE:
https://alioth.debian.org/tracker/index.php?func=detail&aid=314832
It ends that the bug was fixed after the 1.0.24 SANE release (Trusty comes with
1.0.23 and Utopic with 1.0.24).
It seems like this bug was fixed in RELEASE_1_0_24-213-g92e4d96, but not on
R
In Linux Mint 17 (Ubuntu 14.04) the situation is much worse: I can't ever scan.
With Mint 16 (Ubuntu 13.10) the "invalid argument" error message just happened
sometimes, now it happens almost always.
With Skanlite, it's either shown almost immediately, after a weak movement,
when pressing the p
For me, there is no option to disable "Intel xHCI Mode" on DELL XPS
notebook. So I have got the exact symptoms and no working Canon LiDE 110
scanner.
Ubuntu 12.04.5 LTS
Kernel 3.13.0-36-generic x86_64
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
I had the same problem, Canon LiDe 110 worked out of the box in Kubuntu
12.04, upgraded to 14.04 and any attempt to scan failed with an "Invalid
argument" error message; but a workaround reported here (
https://bugs.launchpad.net/ubuntu/+source/xsane/+bug/1247371 ) worked
for me:
Kubuntu 14.04 3.1
Does someone works on it ?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage notifications about this bug
Is this duplicate of
https://bugs.launchpad.net/ubuntu/+source/xsane/+bug/1247371?
I have the same problem with Fujitsu S1300 scanner on Ubuntu 14.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/118
** Also affects: simple-scan
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb
still having the problem w Simple Scan and ubuntu 14.04 w all fixes. The
problem does not happens with XSane, but after using Simple Scan also XSane
does not find the scanner.
Ubuntu 14.04 (trusty) Kernel 3.13.0-24-generic (#47-Ubuntu SMP Fri May 2
23:30:00 UTC 2014)
--
You received this bug
I reopen this report as the bug is happening again in 14.04. See
comments above.
** Changed in: sane-backends (Ubuntu)
Status: Fix Released => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net
For me the bug happens even if I don't close simple scan between scans.
I must restart the scanner every single scan which is really annoying.
Can we reopen this ? Is this a sane bug or libusb related ?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
Here are a few notes after some researches:
--- jeekajoo's way to debug:
$ scanimage -v > test1.jpg
$ scanimage -v > test2.jpg
is a good way because it produces the bug (so no need to have simplescan
hanging and force quitting it).
--- contrary to what I wrote earlier, Skanlite is also producing
I tested almost all the frontends listed on http://www.sane-project.org
/sane-frontends.html on Ubuntu 14.04 (64Bit). The only one which worked
correctly was Skanlite (not Scanlite). It might be because it is based
on libksane (instead of libsane)?
I'd like to scan from the terminal though but it
Sorry, I just noticed a mistake in my last sentence: It is important to
close simple scan between scans (the bug doesn't occur if you scan
multiple pages withOUT closing simple scan).
Is there a way to change this bug as "not fixed"?
--
You received this bug notification because you are a member
It might be fixed for earlier versions of Ubuntu but I confirm this also
affects me with:
- Scanner = Canon Lide 110
- OS = Ubuntu 14.04 up to date
- simple-scan = 3.12.1
The process to repeat the bug is:
1- scan an image and save it
2- close simple scan
3- re-open simple scan
4- simple scan jus
+3,63s] DEBUG: scanner.vala:1209: sane_start (page=0, pass=0) ->
SANE_STATUS_GOOD
[+3,63s] DEBUG: scanner.vala:1226: sane_get_parameters () -> SANE_STATUS_GOOD
[+3,63s] DEBUG: scanner.vala:1238: Parameters: format=SANE_FRAME_RGB
last_frame=SANE_TRUE bytes_per_line=7668 pixels_per_line=2556 lines=
I just upgraded from 13.04 to 14.04 and hit the same issue. The scanner
is a canon LIDE 210, and it was working fine under 13.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon L
no problem for me on 14.04 (3.13.0-24-generic). tested with two consecutive
scans:
$ scanimage -v > test1.jpg
scanimage: scanning image of size 636x885 pixels at 8 bits/pixel
scanimage: acquiring gray frame
scanimage: min/max graylevel value = 0/251
scanimage: read 562860 bytes in total
$ scanimag
I have recently installed 14.04 and the scanner works fine for me, even
though I get "scanimage: no SANE devices found" message the "simple
scan" which is provided by ubuntu can scan with no problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribe
I also did not have the problem on Ubuntu 13.10, but now I do in Ubuntu
14.04. The symptoms are exactly as described above, and the scanner
device is also the same, Canon LiDe 110. Libsane version 1.0.24.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
I don't have the bug anymore in xubuntu 13.10 with kernel
3.11.0-12-generic
** Changed in: sane-backends (Ubuntu)
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
I have exactly the same problem on ubuntu 12.04 (x64).
Moreover, when ubuntu upgrade to 13.10 (libsane upgrade to 1.0.23),
the scanner does not work (the lamp can not be moved).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: sane-backends (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title
I have exactly the same problem on ubuntu 13.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1184699
Title:
Canon LIDE 110 can only scan once, then I need to replug the usb cable
To manage notifi
65 matches
Mail list logo