I'm using linux-image-2.6.38.10 from natty and I tried also 2.6.39 - the
problem still remains. With 10.10 I didn't have had this issue. Please
fix it, it floods my console with these annoying message and makes the
use of it impossible despite the use of this joystick.
...
[ 1464.128289] acrux
** Changed in: linux
Importance: Unknown = Medium
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/448446
Title:
recognizes the joystick, but not the correct model. not working
--
ubuntu-bugs
** Changed in: linux
Status: Unknown = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/448446
Title:
recognizes the joystick, but not the correct model. not working
--
ubuntu-bugs
If anyone who still has the device and is willing to try kernel patches
would try this one and let me know if it works for them it would be
great. I am pretty sure it should apply to vanilla 2.6.36.
Thanks!
** Patch added: Immediately open ACRUX devices and keep them opened (in
kernel)
Deb-packages with patched kernel for Ubuntu 10.10:
http://rapidshare.com/files/432940011/linux-image-2.6.36-acrux_2.6.36-acrux-10.00.Custom_i386.deb
http://rapidshare.com/files/432941325/linux-headers-2.6.36-acrux_2.6.36-acrux-10.00.Custom_i386.deb
--
recognizes the joystick, but not the correct
On Mon, Jul 19, 2010 at 11:23:23PM -, Dmitry Torokhov wrote:
Would you kindly remove the jskeepalive from your distribution and
instead raise a proper bugreport on bugzilla.kernel.org so that
automatic PM is disabled or fixed for that device? Please CC Jiri Kosina
and Oliver Neikum on the
Joaquín,
Would it be possible for you to run a little test for me?
I would like to know if the following steps still allow your gamepad to work:
1. Disconnect the gamepad
2. Disable the udev rule shipped in the joystick package (add a # at the start
of the last line in
Note that the rule in step 3 above should be on a single line...
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Stephen,
Would you kindly remove the jskeepalive from your distribution and
instead raise a proper bugreport on bugzilla.kernel.org so that
automatic PM is disabled or fixed for that device? Please CC Jiri Kosina
and Oliver Neikum on the report.
Thanks.
--
recognizes the joystick, but not the
Hi Sergei,
If you send me the patches (with an appropriate Signed-Off-By line - see
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=999b874f4aa39b7abf45662ff0900f943ddb2d02
for an example), I'll see if I can get them in. Don't worry about your
English, it's
I forgot to mention, you'll find my email address on my Launchpad
profile.
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Thanks Stephen, I sent an email for you.
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I have done support of force feedback for ACRUX controllers, but i need
help in submitting kernel patches. And of course my english is ver bad.
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you
** Changed in: dasher
Status: New = Invalid
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Changed in: dasher
Status: New = Fix Released
** Changed in: dasher
Status: Fix Released = New
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs,
This bug was fixed in the package joystick - 20051019-11
---
joystick (20051019-11) unstable; urgency=low
* evtest: flush standard output, thanks Florian Fainelli! Closes:
#581740.
joystick (20051019-10) unstable; urgency=low
[ Stephen Kitt]
* Switch to 3.0 (quilt)
Sorry, I haven't uploaded a new version of the package yet, so Lucid
Lynx still has the old version; I'm working on implementing a feature in
response to another bug (in Debian), it should be ready soon.
In the meantime you can still use the previous fix!
--
recognizes the joystick, but not the
Hello,
I installed reciently, the new Ubuntu Lucid Lynx, but in the joystick
packages, the jskeepalive and the configuration doesn't appear!!!
What happen??
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug
OK, It works!
Thanks!
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
To add another joystick, try replacing the rule you're currently using with the
following:
KERNEL==js*, ATTRS{name}==ACRUX USB GAMEPAD 8116,
RUN+=/usr/local/sbin/jskeepalive %E{DEVNAME}
When the rule is matched, %E{DEVNAME} will be replaced with whatever device
has just been created
OK, You're the BEST!!!
A lot of Thanks!!!
Joaquín Vacas Verísimo
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Stephen, if I (example) buy another joystick, but my configuration is js0
I need to add another with js1??
I have a friend that He has the same problem as I
Thanks
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug
I'll include the daemon and the udev configuration file in the next
version of the Debian package, which should make it to Ubuntu shortly
thereafter.
Concerning the force-feedback, I had a look at the kernel drivers and
there doesn't seem to be a standard way of handling it, so you'd need
It works!
But I only need to change the %b to js0
I send my udev rule
When you finish the daemon, Can you say to me?
And How Can I make a deb package with the rules and the jskeepalive
program??
A lot of Thanks!!!
** Attachment added: 010_local.rules
I Can't get working the force-feedback option (all ff* program says that my
joystick doesn't support force-feedback, but i've tested on a computer of a
friend, in windows, It works)
Thanks!
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
2010/1/23 Joaquin Vacas jknv...@gmail.com
It doesn't works!
I do a bad step??
I send my 010_local.rules
Can you help me to make another daemon??
** Attachment added: 010_local.rules
http://launchpadlibrarian.net/38332466/010_local.rules
--
recognizes the joystick, but not the correct
Sorry, my mistake, the udev rule should say
KERNEL==js*, ATTRS{name}==ACRUX USB GAMEPAD 8116,
RUN+=/usr/local/sbin/jskeepalive /dev/input/%b
(ATTRS rather than ATTR). Could you try again with that line?
I'm working on a proper daemon, but I'm doing it in my spare time so it
might take a
OK, it should be possible to override the protection (the gamepad claims to
require 350mA, which your USB port should be able to supply unless you're using
an unpowered hub). When you connect your gamepad, after a couple of seconds run
dmesg | tail -n 25
This should show a message such
dmesg | tail -n 25 = dmesg_tail.txt
the output doesn't is rejected 1 configuration due to insufficient
available bus power
when I run echo -n 1 | tee /sys/bus/usb/devices/2-8/bConigurationValue
the gamepad continues turned off, I tryed to disconnect and connect it again
but happens the same!
I
Ah! When I run echo -n 1 | tee /sys/bus/usb/devices/2-8/bConigurationValue
the gamepad's led turns on and at the moment it turns off!
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a
I've adapted jstest to simply loop while reading the joystick, which is what
jstest --normal does. I'm attaching the source here; simply build it using
gcc -O2 jskeepalive.c -o jskeepalive
then run it as follows:
./jskeepalive /dev/input/js0
If that fixes your joystick, I'll add
To add udev rules, could you post the output of
/sbin/udevadm info -a -p $(/sbin/udevadm info -q path -n /dev/input/js0)
(with the joystick connected)?
Thanks!
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug
No, this program don't fixes the problem, I need to conect the joystick when
I run ./jskeepalive /dev/input/js0 (the same as jstest)
I tested the program Specto, with 100 ms of update, to the file js0, it
works, but it uses a lot of RAM
--
recognizes the joystick, but not the correct model. not
2010/1/23 Joaquin Vacas jknv...@gmail.com
When I run ./jskeepalive /dev/input/js0 and I connect the joystick it
works, but I need to connect the gamepad at the same time that I run the
command
** Attachment added: jskeepalive
http://launchpadlibrarian.net/38308273/jskeepalive
--
this program does the same as jstest , but without output!
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
It works without terminal!
Thanks, but my problem continues :(
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Sorry, the output of udevadm it's attached!
How can I use the vibrator's option on the gamepad??
** Attachment added: udevadm.txt
http://launchpadlibrarian.net/38308389/udevadm.txt
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You
Regarding comment #19, that was exactly the idea. To fully fix the problem, we
need a way to start the program as soon as the joystick is plugged in; the
following line, added to your /etc/udev/rules.d/010_local.rules files (if you
don't have such a file, simply create it), should start the
It doesn't works!
I do a bad step??
I send my 010_local.rules
** Attachment added: 010_local.rules
http://launchpadlibrarian.net/38312311/010_local.rules
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug
Nice find, the insufficient power would explain why the joystick disappears!
The output of
sudo lsusb -vv
should help determine what's going on...
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification
The output of lsusb -vv is too long, I send a text file on the e-mail
** Attachment added: lsusb.txt
http://launchpadlibrarian.net/38286732/lsusb.txt
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification
Hi,
Sorry for the delay. I hadn't forgotten your problem though; it occurred
to me that it may be related to USB auto-suspend. Could you try the
following?
Connect your joystick, but don't run jstest or anything else. Type
lsusb
and determine the bus and device number for your joystick
When I run cat /sys/bus/usb/devices/2-5:1.0/power/autosuspend
cat syas that this doesn't exists
and the same when I run cat /sys/bus/usb/devices/2-5:1.0/power/level
I send a screenshot ofgnome-device-manager that shows an important
information!!!
I don't see this before this morning
Thanks a
Hello, I need the patch for this problem?
But, I don't receive emails from November
of Stephen Kitt
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Also affects: dasher
Importance: Undecided
Status: New
--
recognizes the joystick, but not the correct model. not working
https://bugs.launchpad.net/bugs/448446
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
lsinput
/dev/input/event0
bustype : BUS_HOST
vendor : 0x0
product : 0x2
version : 0
name: Power Button (FF)
phys: LNXPWRBN/button/input0
bits ev : EV_SYN EV_KEY
/dev/input/event1
bustype : BUS_HOST
vendor : 0x0
product : 0x1
version : 0
name
If I understand correctly, if you simply connect your joystick, it
doesn't work in games etc.? But if you connect your joystick, run
jstest --normal /dev/input/js0 it starts working in other
applications? Do the other applications work *while* you're running
jstest, or do you quit jstest
Hello, I managed to work the joystick running the application while
connecting the joystick.
But it's hard.
I need a daemon that detected as /dev/input/js0 run the command jstest
--normal / dev/input/js0 this is how it works.
Thanks
--
recognizes the joystick, but not the correct model. not
Hi,
Could you show the output of the lsusb command? It's quite likely that
your joystick, sold under one brand, actually identifies itself as
something else; that shouldn't prevent it from working.
Does the joystick work? That is, have you tried it in a game or some
other joystick-using
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/33431774/Dependencies.txt
** Attachment added: XsessionErrors.txt
http://launchpadlibrarian.net/33431775/XsessionErrors.txt
--
recognizes the joystick, but not the correct model. not working
50 matches
Mail list logo
