Hi guys,
Anyone know when we might see this fix make it into Ubuntu 16.04's
official repos? I'm doing some app development that's hindered by this
bug.
(If there's a better forum for this question, I'd be grateful for a
redirect.)
Thanks very much,
Christian
--
You received this bug
as I got with the fglrx package, as
described above.
On Thu, Nov 1, 2012 at 4:37 PM, Christopher M. Penalver
christopher.m.penal...@gmail.com wrote:
Christian Convey, could you please temporarily purge fglrx-legacy, and
test the following PPA to see if it also provides a WORKAROUND
https
Please note that the WORKAROUND of using the
https://launchpad.net/~makson96/+archive/fglrx PPA is imperfect,
because it places the AMD Unsupported hardware watermark on the
bottom-right corner of the screen.
On Fri, Nov 2, 2012 at 11:11 AM, Christopher M. Penalver
.
Christian Convey, could you please comment if fglrx-installer and/or
fglrx-installer-updates works for you in Precise?
** Changed in: fglrx-installer (Ubuntu)
Status: Confirmed = Incomplete
--
You received this bug notification because you are subscribed to the bug
report.
https
Sorry, to clarify my previous comment, I'm using Quantal, 64-bit at the
moment.
On Mon, Oct 29, 2012 at 3:45 PM, Christian Convey
christian.con...@gmail.com wrote:
I don't presently have Precise installed, but I'm near 100% that the
installer did NOT work under Precise.
When I used
Correct.
On Mon, Oct 29, 2012 at 8:16 PM, Christopher M. Penalver
christopher.m.penal...@gmail.com wrote:
Christian Convey, thank you for your comments. Just to clarify, in
Quantal 64-bit you are using
https://launchpad.net/~makson96/+archive/fglrx PPA as a WORKAROUND?
--
You received
It sounds like you're in the same boat that I am. Basically, ATI
decided that any Radeon product with a chip numbered 4xxx is too old
to be worth supporting any more. ATI has written you off.
On Sun, Oct 21, 2012 at 4:53 PM, Alessandro Polverini a...@nibbles.it wrote:
I've this vga:
01:05.0
I believe that's correct: the *current* version of fglrx doesn't support
ATI FirePro M7740 chip. Unfortunately, it's only the current version
that's compatible with the version of X that ships with Ubuntu 12.10.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
:
Christian Convey, thank you for reporting this and helping make Ubuntu
better. Regarding your comments
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1059655/comments/3
:
I believe that's correct: the *current* version of fglrx doesn't support ATI
FirePro M7740 chip
Not sure. I'm not that well versed on the intricacies of the X
server and/or the linux kernel.
I think it would take someone from AMD to say whether or not their
newest driver REALLY needs version 11 of the ABI, or if versions 12/13
are actually okay as well.
On Thu, Oct 4, 2012 at 11:56 AM,
I'm going to add a comment to help people Googling this issue. The ATI
Mobility M7740 chip, which was one option for the Dell M6500 Mobile
Precision laptop, is apparently considered a 4000-series chip, and so is
a victim of this AMD policy.
One of the supposed justifications for over-priced
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1059655
Title:
fglrx doesn't support ATI FirePro M7740 chip?
To manage notifications about this bug go to:
Public bug reported:
The fgrlx package now installs successfully for me. However, I
believe it's not recognizing my chip, the ATI FirePro M7740. This is
the chip that Dell uses in the Precision M6500 laptop from about 3 years
ago.
I have a few reasons for thinking fglrx isn't doing its job
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1054992
Title:
fglrx package has unmet dependency
To manage notifications about this bug go to:
Public bug reported:
First, let me note that the fglrx-installer package doesn't appear in
the repositories (default) that I'm using, so I assume that I'm supposed
to just install the fglrx package directly.
When I try to install the closed-source AMD driver for my laptop
graphics chip (AMD
Public bug reported:
I'm using Ubuntu 12.10 beta, up to date as of 2012-09-15, 2 pm U.S.
Eastern time.
Uname output: Linux awesome 3.5.0-14-generic #19-Ubuntu SMP Fri Sep 14
20:21:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
My graphics chip is this (from lspci):
01:00.0 VGA compatible
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051362
Title:
fglrx (not installed): fglrx kernel module failed to build
To manage notifications about this bug go to:
Just installing the package doesn't seem sufficient. I have it
installed (Mint 13) and get the same error. I suspet it's that there
are no symlinks of the form /usr/lib/foo.so -- /usr/lib/foo.so.48
cjc@awesome:~/packages/x$ dpkg -L libicu48
/.
/usr
/usr/share
/usr/share/doc
Never mind - those symlinks do exist. I don't know why we're seeing
this.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/989915
Title:
Unable to start murmurd..
To manage notifications about this
Public bug reported:
I'm running 11.04 64-bit. Just ran sudo aptitude update sudo
aptitude upgrade. Got the following output:
Resolving dependencies...
The following NEW packages will be installed:
linux-image-2.6.38-10-generic{a}
The following partially installed packages
** Attachment added: version.log
https://bugs.launchpad.net/bugs/794125/+attachment/2159341/+files/version.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/794125
Title:
package
I just updated from the repositories, and everything seems good now.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/794125
Title:
package linux-image-2.6.38-10-generic (not installed) failed to
Hi Jeremy,
I apologize for being so slow to respond. For whatever reason, the
problem no longer occurs.
- Christian
On Mon, May 24, 2010 at 12:34 PM, Jeremy Foshee
jeremy.fos...@canonical.com wrote:
Hi Christian,
If you could also please test the latest upstream kernel available that would
Public bug reported:
I'm using 10.04 64-bit on a laptop with an Intel 5300 AGN wifi adapter.
If I boot into the following kernel, I have Wifi (at least usually);
Linux awesome 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010
x86_64 GNU/Linux
However, if I boot into the most recent
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/48626504/AlsaDevices.txt
** Attachment added: AplayDevices.txt
http://launchpadlibrarian.net/48626505/AplayDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/48626507/BootDmesg.txt
**
/studio/jack_alsa2.png )
Thanks,
Christian
On Tue, Jun 16, 2009 at 5:01 AM,
laurent.bellegardelaurent.bellega...@free.fr wrote:
Christian Convey a écrit :
Does anyone know if/how I can get my Radias to have a MIDI connection
to my Ubuntu Studio 9.04 computer, over USB?
I'm very new to connecting
Hi guys,
Whenever I've used Ubuntu in the past, including Ubuntu 9.04, there
has been a task bar at the bottom of the screen, showing each running
window. This is in addition to the bar at the top of the screen
containing the launch menu, the system time, etc.
However, in Ubuntu Studio 9.04,
, and select add panel or
add bar or something like that. (I've got the Dutch version, and it's
called 'paneel').
Greets,
Bart
http://www.bartart3d.be/
On Wed, Jun 17, 2009 at 12:13 PM, Christian Convey
christian.con...@gmail.com wrote:
Hi guys,
Whenever I've used Ubuntu in the past, including
Does anyone know if/how I can get my Radias to have a MIDI connection
to my Ubuntu Studio 9.04 computer, over USB?
I'm very new to connecting a MIDI keyboard to a PC. I just bought a
Korg Radias, and it has a USB connector. The Radias software for
Windows has a USB-MIDI driver. It works fine
Does anyone know if/how I can get my Radias to have a MIDI connection
to my Ubuntu Studio 9.04 computer, over USB?
I'm very new to connecting a MIDI keyboard to a PC. I just bought a
Korg Radias, and it has a USB connector. The Radias software for
Windows has a USB-MIDI driver. It works
Public bug reported:
The opt package provides the file, /usr/lib/libopt.a.
So by Debian / Ubuntu naming conventions, shouldn't the package be named
libopt-dev ?
I'm seeing this in Ubuntu 9.04. The package version of opt is
3.19-1.1.
** Affects: ubuntu
Importance: Undecided
Thanks. I just installed it, ran aticonfig, and it ran great for me.
Thanks for sharing it.
- C
On Thu, Mar 19, 2009 at 2:24 PM, Bryce Harrington
br...@bryceharrington.org wrote:
So are you saying that if I install the fglrx package, using just
Jaunty's default repositories, I'll get a
Fwiw, I've uploaded the final 6.12.0 today. I re-tested this on an
hd4850 but did not find the whitescreen issue gone.
Can you two please update to today's latest (with -ati 6.12.0) and
verify the white issue is still gone? If it has regressed please re-
open this bug so I can explore
Show off ;)
So are you saying that if I install the fglrx package, using just
Feisty's default repositories, I'll get a testing version driver to
which you're referring?
On Tue, Mar 17, 2009 at 2:25 PM, Bryce Harrington
br...@bryceharrington.org wrote:
You can assume I get testing stuff before
Please pretend that I'm not an idiot in the previous post, and that I
said Jaunty's repositories, not Feisty's repositories.
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you
My problem is fixed in 20090314. I have no graphics problems whatsoever
at this point. Thanks to everyone who helped fix it.
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because
@Patrice: Okay, thanks. Then I'm sad to report that this has not fixed
my bug.
The system isn't truly frozen: When I ran today's (13 March's) live CD,
I still get the white screen of death. However, I can switch VTs to get
a console.
Should I supply a new batch of lcpci and log files to this
Wonderful! Which daily should contain the fix: 13 March, or 14 March?
On Fri, Mar 13, 2009 at 1:21 AM, Patrice Vetsel ubu...@kagou.fr wrote:
Bryce have uploaded 1:6.11.0+git20090310.945ccbbd-0ubuntu1 Snapshot from git
taken 2009-03-10
waiting for a new daily iso to confirm bug fixed. Thanks
Okay. So if someone wants to either direct me to a different bug # for
my version of this problem, or have me open a new bug, just let me know.
I guess in the worst-case scenario I can wait for the proprietary
Catalyst driver to be ready, which I'm guessing will be mid-April. I
was just really
Sounds like we have two bugs that have the same presentation bug
different pathologies.
How should we handle this? Un-mark my original bug report as a
duplicate of this one?
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
Still present in 20090312 daily live 32-bit.
Since alpha-6 is due for release today, does that mean this bug's
milestone release needs updating?
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug
Still present in:
http://cdimage.ubuntu.com/releases/9.04/alpha-6/jaunty-desktop-i386.iso
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you are a member of Ubuntu
Bugs,
Still present in 11 March 2009 32-bit live CD build.
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
@Nicholas: To whom are you addressing your question?
If it's to me, then the answer is no, because I'm not the package
maintainer.
- Christian
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug
This bug is still present in today's (4 March 2009) 32-bit live CD
build. (I haven't tested other versions of today's build.)
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because
I just tried the 9.04 alpha5 live environment, with my HD 8450 card. I
still get the white screen of death, but now I can switch virtual
terminals, so at least I can now access a shell.
Thanks to that new-found ability, I was able to access various files of
interest. I'm attaching them to this
** Attachment added: dmesg
http://launchpadlibrarian.net/23171835/dmesg
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Attachment added: kern.log
http://launchpadlibrarian.net/23171848/kern.log
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: lspci-vv.txt
http://launchpadlibrarian.net/23171859/lspci-vv.txt
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Attachment added: syslog
http://launchpadlibrarian.net/23171860/syslog
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: xorg.conf
http://launchpadlibrarian.net/23171862/xorg.conf
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: Xorg.0.log
http://launchpadlibrarian.net/23171867/Xorg.0.log
--
[RV770 HD 4850] ATI Radeon HD 4850 not supported - white screen and system
freeze
https://bugs.launchpad.net/bugs/325394
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Hey Bryce,
I'm not very familiar with how your efforts relate to what ends up on
the daily live CDs. Do you know when the daily live CD is likely to
contain this fix? I'm eager to try it out.
Thanks,
Christian
On Thu, Feb 19, 2009 at 3:45 PM, Bryce Harrington
br...@bryceharrington.org wrote:
Hi Bryce,
Thanks for the tip. Is -radeonhd a boot parameter that I can supply
to the Live CD's kernel command line?
- Christian
On Wed, Feb 18, 2009 at 2:09 AM, Bryce Harrington
br...@bryceharrington.org wrote:
The usual technique is to boot into recovery/failsafe mode, set up the
network,
Okay, I tried to reproduce the bug more carefully, so I can give a
better report. Here are the details:
I downloaded the 9.04 (alpha3) AMD64 live desktop CD. I booted from it,
using it as a live CD.
I ended up with a plain white screen. Hitting ctrl-alt-backspace had no
visible effect.
When
Public bug reported:
I've got a card based on an ATI Radion HD 4850 chip. I burned today's
live CD of Intrepid Ibex (386 Desktop), and used it to install the OS
onto the HDD.
When GDM should come up, I get a white screen. Hitting ctrl-alt-F1
makes the screen go black, but no text comes up.
I
I made a little progress. I downloaded ATI's proprietary driver
(version 8.561), and installed it from single-user mode.
When I next booted, X didn't show me the white screen, but instead
showed me a dialog box (grey on a black background) stating that there
were problems with starting X, and it
I think since Kile is a KDE program, it would make more sense to have it
default to using Okular rather than Evince. I think Okular replaced
KPDF and perhaps KDVI as well.
--
Kile comes with kde presets, but doesn't depend on the relevant packages
https://bugs.launchpad.net/bugs/237570
You
Public bug reported:
I'm using Ubuntu 8.10. My printer is an HP OfficeJet Pro L7680.
I did a clean install of Ubuntu, and added the printer via System -
Administration - Printing. I used the recommended driver: HP
Officejet Pro l7600 Foomatic/hpijs, hpijs 2.8.7
When I printed the test page
Public bug reported:
I'm using 8.10 pre-release (although it's fully updated as of yesterday,
29 Oct. 2008, so it's pretty much 8.10).
I can no longer print on our network printer. It's a Xerox Phaser
6250DP. I was able to when running 8.04, and I'm pretty sure it worked
up until recently with
** Attachment added: The output produced by Ubuntu's printer-troubleshooting
tool
http://launchpadlibrarian.net/19074913/troubleshoot.txt
--
printing broken on Xerox Phaser 6250DP printer
https://bugs.launchpad.net/bugs/291086
You received this bug notification because you are a member of
** Attachment added: The CUPS driver suppled by Xerox for this printer
http://launchpadlibrarian.net/19074915/xrx6250dp.ppd
--
printing broken on Xerox Phaser 6250DP printer
https://bugs.launchpad.net/bugs/291086
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: One file I was trying to print when I got this problem.
http://launchpadlibrarian.net/19074927/mik.ifl97.ps
--
printing broken on Xerox Phaser 6250DP printer
https://bugs.launchpad.net/bugs/291086
You received this bug notification because you are a member of Ubuntu
** Attachment added: Printer configuration dialog for the problematic printer
http://launchpadlibrarian.net/19075032/printer-config.png
--
printing broken on Xerox Phaser 6250DP printer
https://bugs.launchpad.net/bugs/291086
You received this bug notification because you are a member of
I reported this bug in over two years ago, and despite confirming its
presence in just about every release since then, nothing gets done
about the bug.
I'm not going to answer the question, because I don't think it will do
any good.
On Mon, Oct 13, 2008 at 11:46 AM, Pablo Castellano
[EMAIL
How can the importance of this bug be set to wishlist??? It's an
actual bug in the documentation. The man page is supposed to list all
of the relevant files, and /etc/magic.mime is a relevant file, and it's
not mentioned in the man page!
This bug report doesn't represent a request for a new
I'm still getting this problem.
I'm using the current pre-release of 8.10 (as of 25 Sept. 2008), with kernel
version:
Linux socrates 2.6.27-4-generic #1 SMP Wed Sep 24 01:30:51 UTC 2008 i686
GNU/Linux
My hardware is a Dell D830, with an Intel Core2 T9500 processor.
If I sleep the laptop,
I just ran into this also, but I think I know the problem (mostly):
When you first try to share a folder, it offers to install SAMBA. You
accept, and it installs SAMBA, and also makes you a member of the group
sambashare. However, until you re-login, your not considered really
to be a member of
From the content of my grub boot menu, which I haven't manually
modified, it looks like I was using the generic kernel with 7.10.
I can't tell if it's a dupe. Your call.
On Thu, Apr 3, 2008 at 12:11 PM, Leann Ogasawara [EMAIL PROTECTED] wrote:
Hi Christian,
Were you using the -386 kernel
Public bug reported:
I had a perfectly functional Gutsy system. When the Hardy beta release
came out, I did an in-place dist upgrade. Everything worked except for
the sound.
'alsamixer' and Gnome's Volume Applet (2.22.0) gave messages to the
effect that there was no sound device or gstreamer
** Attachment added: lspci-vv.txt
http://launchpadlibrarian.net/12945632/lspci-vv.txt
--
gutsy-hardy upgrade: didn't install (needed) linux-ubuntu-modules-2.6.24-12-386
https://bugs.launchpad.net/bugs/208229
You received this bug notification because you are a member of Ubuntu
Bugs, which is
When I print the same PDF from Windows XP, printing it in duplex does
*not* cause the top of the document to be clipped.
--
Printing duplex on HP-L7680 clips top of page
https://bugs.launchpad.net/bugs/185378
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
I've got an HP-L7680 all-in-one that's sitting on my LAN.
I have a particular PDF (my W-2 form, so unfortunately I can't provide a
copy) that has this problem: When I print it in duplex, the top of the
document (less than 1/4, I think) is absent. When I print in one-sided
Still broken with Hardy Heron Alpha2.
On the bright side, this was reported 2 years ago, so if we just wait
another 3 years or so, all the laptops with this bug should be out of
service.
--
Wifi-enabled led is not lit on ipw2200 cards
https://bugs.launchpad.net/bugs/21367
You received this bug
I can no longer reproduce it.
On 10/7/07, Marco Maini [EMAIL PROTECTED] wrote:
Thanks for your report. I'm unable to reproduce this in Gutsy, Is still
an issue for you?
** Changed in: kdebase (Ubuntu)
Assignee: (unassigned) = Marco Maini (maini10)
Status: New = Incomplete
--
I have an HP dv4150 laptop (Centrino-based, with Intel graphics and
wifi). It also resumes immediately after being told to hibernate. This
is a regression relative to Feisty.
--
[gutsy] hibernate fails on HP nx6325
https://bugs.launchpad.net/bugs/145750
You received this bug notification
Correction: The newline is added to the file, but there's an odd GUI
effect:
Normally when you press Enter, your cursor moves one row down, visually.
In this case, the cursor stays on the same screen position it was
before. The only visual indication you get that you pressed Enter at
all is that
Public bug reported:
Binary package hint: kate
I'm using Gutsy and Kate 2.5.7 (part of KDE 3.5.7).
Create a new file in Kate, and paste some text into the buffer.
Now position the cursor at the beginning of the file, and press the
Enter key. Nothing happens.
That action *should* insert a
Fixed in 2.6.22-12-generic (pre-release Gutsy).
Resume-from-suspend still has some issues, like the network interfaces
disappear. But the regardless, /proc/acpi/button/lid/LID/state is
definitely accurate now.
--
/proc/acpi/button/lid/*/state always says open
I'm using an up-to-date Feisty, and I can't find the option for
selecting full-screen vs. windowed. However, when I try to toggle the
Shadow Type setting on the Video menu, the game crashes.
I get this printed to the terminal from which I ran gltron:
[script] calling action of 'ShadowStyle',
Public bug reported:
Binary package hint: linux-source-2.6.22
This is the same bug as
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/89860
except that it's also present in Gutsy's 2.6.22 kernel. I'm making a new bug
report because the other bug report's source package
When I run sudo acpi_listen, I don't get anything printed when I press
/ release the lid sensor button. As a sanity check, I pressed the
laptop's power button, and that *did* show up on the output of
acpi_listen.
Output of uname -a:
Linux peace 2.6.22-6-generic #1 SMP Fri Jun 1 19:24:12 GMT 2007
** Attachment added: Output of sudo lspci -vv
http://launchpadlibrarian.net/8522547/lspci-vv.txt
--
[Gutsy] /proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/126972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
** Attachment added: Output of sudo lspci -vvn
http://launchpadlibrarian.net/8522549/lspci-vvn.txt
--
[Gutsy] /proc/acpi/button/lid/*/state always says open
https://bugs.launchpad.net/bugs/126972
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
I don't recall if there was ever a past version of Ubuntu for which this
works, so I can't say whether or not it's a regression.
But Jeff Trull has added a comment here:
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/89860
that make it sound like this *is* a regression
OK, I logged this into WineHQ's bugzilla:
http://bugs.winehq.org/show_bug.cgi?id=8942
--
wine can't run Astral Masters (works in Edgy)
https://bugs.launchpad.net/bugs/92877
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
My path to success:
I'm having this problem with an old-ish Dell Optiplex SX260.
To get around this, I booted from the standard Feisty live CD. At the
boot menu I chose the option (the 3rd one?) that says to an install with
an updated driver CD. When I was prompted to put in the driver CD, I
OK, so the Ubuntu user experience has a problem. The version of
Firefox installed in Ubuntu lead the user (me) through a series of
steps that we know don't work on Ubuntu, and there was no direction
given for what the Ubuntu-blessed way is to get JRE installed.
I have no problem with installing
Public bug reported:
I did a clean gutsy tribe 1 install on an HP dv4150 notebook. Under
feisty and earlier versions, clicking on gnome's shutdown icon brings up
the shutdown menu, which always included sleep and hibernate.
Under gutsy tribe 1, sleep and hibernate aren't listed as options.
**
Public bug reported:
Printing worked just fine under Edgy for me. I did a clean install in
Feisty, and here's what I get:
When I print a document using Acroread 7.0 or Firefox, each page is
printed in an invalid mix of landscape and portrait. Here's what I mean:
* *
This may be the same bug as:
https://bugs.launchpad.net/ubuntu/+source/gnome-print/+bug/95208
but it's hard to tell because this present bug report talks about more apps
than 95208 does.
It also seems similar to this bug:
https://bugs.launchpad.net/ubuntu/+source/kdegraphics/+bug/47649
but
OK, my ASCII art doesn't look good as HTML. so I'm attaching a
photograph of a page that Firefox (mis)printed.
** Attachment added: Example of misprinted page
http://librarian.launchpad.net/7555757/1.jpg
--
some apps print in landscape,and badly
https://bugs.launchpad.net/bugs/112391
You
Here's a concrete example:
This document:
http://en.wikipedia.org/w/index.php?title=Kalman_filterprintable=yes
prints perfectly using konqueror, but has the orientation+cropping problem when
printed in firefox. This is the document that appears in the photograph
attached to this bug report.
Or to put it differently:
There's a bug in xorg and/or the nvidia driver and/or the kernel and/or gnome,
because a user-mode program was able to take down the whole desktop.
How can it matter that we don't have the source to the program that
demonstrates the existence of the bug? Sticking our
Public bug reported:
When I boot my feisty computer, the network doesn't appear to be
initially up. This is evident because (a) the NetworkManager Applet
shows no network connection and (b) programs like firefox / apt-get
can't access the Internet.
All I need to do after booting is either of
** Attachment added: Output of sudo lspci -vv
http://librarian.launchpad.net/7338397/lspci-vv.txt
--
Need to manually ifup eth0 in feisty
https://bugs.launchpad.net/bugs/107123
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
Output of uname -a:
Linux pascal 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
GNU/Linux
--
Need to manually ifup eth0 in feisty
https://bugs.launchpad.net/bugs/107123
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
** Attachment added: dmesg output (after having used network manager to bring
up the network)
http://librarian.launchpad.net/7338398/dmesg.txt
--
Need to manually ifup eth0 in feisty
https://bugs.launchpad.net/bugs/107123
You received this bug notification because you are a member of Ubuntu
** Attachment added: Output of lsmod after I brought up the the network
manually
http://librarian.launchpad.net/7338411/lsmod.txt
--
Need to manually ifup eth0 in feisty
https://bugs.launchpad.net/bugs/107123
You received this bug notification because you are a member of Ubuntu
Bugs, which
0.6.4, which seems to be the current one on the repositories.
On 4/16/07, Robert Collins [EMAIL PROTECTED] wrote:
NM had problems late last week, that are meant to be resolved. What
version of network-manager do you have installed ?
--
Need to manually ifup eth0 in feisty
1 - 100 of 183 matches
Mail list logo
