Hi,
No we didn't.
As Greg said, we just tried to add reboot_notifier function to
linux-2.4.x/driver/mtd/maps/ixp425.c,
but it is no useful.
Regards,
Zeinab Zeinalpour
On 6/18/07, Doug Kehn [EMAIL PROTECTED] wrote:
Hi Zeinab,
--- Zeinab Zeinalpour wrote:
Hi Doug,
Yes, I get and then
Hi Zeinab,
--- Zeinab Zeinalpour wrote:
We use busybox's reboot. When we use reboot command,
the board is rebooting
(all of its LED turn on and off), but redboot won't
boot on the board. Our
redboot's version is 1.92.
Strange. I'm using the same Redboot version too.
We haven't
Hi Doug,
Yes, I get and then nothing happened. We also changed our kernel to
2.4.21and added reboot_notifier from
coyote.c to ixp425.c but nothing happened. Do you have any suggestion?
Best regards,
Zeinab Zeinalpour
On 6/16/07, Doug Kehn [EMAIL PROTECTED] wrote:
Hi Zeinab,
--- Zeinab
Hi Greg,
Thank you for answer,
I added reboot_notifer to ixp425.c(same as nettel.c).
And now reboot work well.
regards,
Nikita
On 6/12/07, Greg Ungerer [EMAIL PROTECTED] wrote:Hi Greg,
Hi Nikita,
Nikita Tabatsky wrote:
drivers/mtd/map/ixp425.c
and there any xxx_reboot_notifier is absent.
Hi Doug,
Which reboot is being used; Busybox's or other?
Busybox's
What does the console output look like from a good
startup and a bad reboot?
Bad reboot:
/ $ reboot
The system is going down NOW !!
Sending SIGTERM to all processes.
Requesting system reboot.
Restarting system.
and
Hi Doug,
Greg is snapgear 3.4.0 similar to
uClinux-dist-20060803? uClinux-dist-20060803 has
2.6.17 and I used it on ADI/Coyote and rebooted with
no problem. I use busybox's reboot.
I'm presently using uClinux-dist-20070130 with patches
to pull the kernel up to 2.6.21.5 on ADI/Coyote and
Hi Doug,
Doug Kehn wrote:
--- Zeinab Zeinalpour wrote:
We use mtd-block(jff2) and the mtd driver does not
have a reboot notifier
that puts the flash back into read mode before
rebooting. We use kernel
2.6.17 (snapgear 3.4.0) and instead of ixp425.c
file, it has ixp4xx.c
which has no
Hi Greg,
We use mtd-block(jff2) and the mtd driver does not have a reboot notifier
that puts the flash back into read mode before rebooting. We use kernel
2.6.17 (snapgear 3.4.0) and instead of ixp425.c file, it has ixp4xx.c
which has no reboot_notifier and register/unregister_reboot_notifire.
Hi Zeinab/Greg,
--- Zeinab Zeinalpour wrote:
Hi Greg,
We use mtd-block(jff2) and the mtd driver does not
have a reboot notifier
that puts the flash back into read mode before
rebooting. We use kernel
2.6.17 (snapgear 3.4.0) and instead of ixp425.c
file, it has ixp4xx.c
which has no
Hi Nikita,
Nikita Tabatsky wrote:
I have the same problem on the ixp425 board with intel strata flash and
at present it is not solved
After write to the mtd-block(jffs2) the device cannot be rebooted.
Even hardware reset does not help, only power off..
Yep, that sounds exactly like your mtd
Hi Greg,
I use IXP425 based systems mtd map and 2.4.21 kernel version
regards,
Nikita
On 6/8/07, Greg Ungerer [EMAIL PROTECTED] wrote:
Hi Nikita,
Nikita Tabatsky wrote:
I have the same problem on the ixp425 board with intel strata flash and
at present it is not solved
After write to the
Hi Nikita,
Nikita Tabatsky wrote:
I use IXP425 based systems mtd map and 2.4.21 kernel version
Yes, but what map driver, drivers/mtd/map/???
Almost certainly with that old a version it will not have
the reboot notifier setup to put the flash back into read
mode.
Regards
Greg
On 6/8/07,
Hi Zeinab,
Zeinab Zeinalpour wrote:
I'm working on ADI Coyote network board using snapgear 3.4.0.
When we reboot the board with using reboot command, the board reboot but
its redboot isn't load. We chack ParityENAccCodelet for find a safe code
for reboot, but it just work on ixp46x. Did
Hi,
I'm working on ADI Coyote network board using snapgear 3.4.0.
When we reboot the board with using reboot command, the board reboot but its
redboot isn't load. We chack ParityENAccCodelet for find a safe code for
reboot, but it just work on ixp46x. Did anyone has the same problem befor?
Best
14 matches
Mail list logo
