Hello,
We have a board with an AT91CAP7 chip; it's an arm7tdmi with and external data
bus and some custom peripherals in an on-board fpga.
The board can boot from a 4MByte serial flash device, and has NAND attached.
There are 32MBytes of SDRAM on the board.
We'd like to get uClinux running wit
Hi,
On Thu, 2011-08-11 at 09:47 -0700, Bob Wirka wrote:
> We have a board with an AT91CAP7 chip; it's an arm7tdmi with and
> external data bus and some custom peripherals in an on-board fpga.
>
> The board can boot from a 4MByte serial flash device, and has NAND
> attached. There are 32MBytes of
From: Ithamar R. Adema
To: uClinux development list
Sent: Thursday, August 11, 2011 2:49 PM
Subject: Re: [uClinux-dev] New uClinux Port to AT91CAP7 (ARM7TDMI)
Hi,
On Thu, 2011-08-11 at 09:47 -0700, Bob Wirka wrote:
> We have a board with an AT91CAP7 chip; it's an arm7tdmi with and
> exter
Hi Bob,
On Thu, 2011-08-11 at 14:08 -0700, Bob Wirka wrote:
> Thank you for your reply.
You're welcome :)
> No, that's a real issue; there is no Linux BSP from Atmel. They've got
> some support for Ecos (and, hence, redboot), but that's about it. It
> would be nice if we could use the 2.6 kerne
Hi Bob,
On 12/08/11 02:47, Bob Wirka wrote:
We have a board with an AT91CAP7 chip; it's an arm7tdmi with and external data
bus and some custom peripherals in an on-board fpga.
The board can boot from a 4MByte serial flash device, and has NAND attached.
There are 32MBytes of SDRAM on the board
