ralphy wrote:
> I use a script with parameters.
paul- wrote:
> For what it is worth, the jsonrpc interface is quite a bit faster.>
Code:
> >
> busybox wget -q -O- --post-data='{"id":1,"method":"slim.request","params":
[ "PLAYERNAME", [ "mixer", "volume", "+1" ]
Hi,
I've compiled a version of squeezelite with a 1 Hour timeout on the -G
option by setting the SLEEP_DELAY.
I've compiled (lots of requirements !) it and tested it on PCP with the
"Custom Squeezelite" option and works fine (Times out properly).
My coding skills are rather limited, is there
mcduman wrote:
> When I scan I get no wifi devices found error. With my old non plus rpi3
> I don't have the same problem
I would guess the channel your AP is using is not compatible with the
3B+. I've seen a lot of channels that don't work
piCorePlayer a small player for the Raspberry Pi
paul- wrote:
> Wifi works fine without country code setting in both 2.4G and 5G
> connections (I'm using a 3B+ on wifi right now). The country code
> requirement in raspbian is a software requirement only. There is no
> hardware requirement for that.
>
> So go back to the normal wifi
mcduman wrote:
> I am using the new Rpi 3b+ with pCP 3.5.0. I cannot get the built-in
> wifi to connect. This appears to be a known issue and is discussed in
> raspbian forums. One solution appears to be entering your country code
> in wpa_supplicant.conf. Has any body found a solution for the
Hi.
A comment to the Audiophonics Sabre 9028 DAC.
Audiophonics offers a custom standalone driver.
It's done the same way as it is done now with the Katana DAC.
They have a MCU onboard that's being controlled by the driver and that
MCU controls the Sabre chip.
Audiophonics doesn't have the
Hello,
I want to use slimmer/LCDproc to drive the VFD display of my (broken)
Denon DRA-585RD. I did some hardware design myself a couple of years ago
and wrote a python script which sends the necessary info to my hardware
through a serial(GPIO) connection to my hardware. Because the python
Greg Erskine wrote:
> When using pCP, there is the "pCP CLI". Type "pcp" at the prompt.
>
Thanks Greg, I'll try this as soon as I get some remotes for my PCP
Raspberries.
For the stand-alone player on the Stretch system I managed to get the
triggerhappy conf working with Paul's hint to the
I believe that the problem is that the Pi's (either the one running my
LMS service or the one with the LCD running JiveLite have an old set of
certificates and they're failing to download the images via Radio
Paradise's HTTPS URL, e.g.
https://img.radioparadise.com/covers/l/B9QGDD.jpg.
No
