paul- wrote:
> Its not a matter of dhcp or not, its a matter of proper network
> routing, if you setup a bridged connection, then there is no reason to
> even use WiFi on the pi. I can guarantee the WiFi on your desktop is
> much better than that of a pi.
I agree with you. It was just a simp
kidstypike wrote:
> Change 7.9.2 to 8.0.0 in step 5
>
> https://www.picoreplayer.org/how_to_upgrade_lms.shtml
thanks for finding that. i was on my mobile when posting last night and
its dreadful to use for searchs
rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 +
HiFiBe
After you set the wifi parameters, you need to backup, then reboot.
Setup with keyboard and mouse instructions are listed here Scroll
down to the second section.
https://www.picoreplayer.org/how_to_setup_wifi_on_pcp_without_ethernet.shtml
piCorePlayer a small player for the Raspberry Pi
I'm running a brand new burned image of PicorePlayer 5.0, standard
build, on a Pi 3B+. It boots just fine. I'm not connected to Ethernet
since I have no wired network connectivity by my stereo.
When I run setup and enter the correct wifi setup info - including all
correct case letters - and
Zabizabo wrote:
> Thank Paul for the tutorial. I will have a look and hopefully I will
> succeed to give a damned DHCP address to this Pi 4 :)
Its not a matter of dhcp or not, its a matter of proper network
routing, if you setup a bridged connection, then there is no reason to
even use WiFi o
kidstypike wrote:
> I asked the OP to do this about 10 pages back . . .
>
> https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support&p=964763&viewfull=1#post964763
I know, one of the issues with this sort of troubleshooting via forum is
lots of people trying to
Gerhardc wrote:
> Hi Paul,
>
> after installation of audio input streamer, the RPI display shows a lot
> of ALSA error messages. After this squeezelite will no more running. A
> new image is required to build.
>
>
Gearhardc,
Please press the "Patch" button on the pCP main page. Then reboot
KeBul wrote:
> Philippe...
>
> One simple question...
>
> Whilst we setup and test wifi can you temporarily put your Raspberry Pi
> hard wired by ethernet direct onto your router?
>
> Cheers
>
> Kev
I asked the OP to do this about 10 pages back . . .
https://forums.slimdevices.com/showthr
Philippe...
One simple question...
Whilst we setup and test wifi can you temporarily put your Raspberry Pi
hard wired by ethernet direct onto your router?
Cheers
Kev
KeBul's Profile: http://forums.slimdevices.com/membe
In another thread, someone noted that if one plans to run LMS on the rPi
(with piCorePlayer), resizing the SD card to 300MB was too small and
perhaps 2000MB would be better. That's the first I'd seen this thought.
Is this only if one plans to use the SD card for holding the cache. In
my own case
paul- wrote:
> Windows handles networking really(really) crappy. But it does work.
>
> My desktop upstairs is connected wifi to the network over wifi. I
> plugged in my pi to the ethernet port of my windows machine, and booted
> it up.. then followed this. Absolutely no manual configura
Windows handles networking really(really) crappy. But it does work.
My desktop upstairs is connected wifi to the network over wifi. I
plugged in my pi to the ethernet port of my windows machine, and booted
it up.. then followed this.
https://www.windowscentral.com/how-set-and-manage-netwo
paul- wrote:
> I don't recall you every saying you were using a Windows PC. Where is
> your Mint based computer? Are you using windows to burn and create your
> text files?
>
> A properly bridged network connection will be seamless to the device
> that is plugged into the bridge port. The p
I don't recall you every saying you were using a Windows PC. Where is
your Mint based computer? Are you using windows to burn and create your
text files?
A properly bridged network connection will be seamless to the device
that is plugged into the bridge port. The pi should get a DHCP addres
paul- wrote:
> Ill check the files when I get back to my desk. You could probably
> solve most of your problems by just bridging your network connection on
> your PC.
>
> Since you run a Linux OS, this should be a beeeze.
In fact my PC linked to the RPi is on Windows 10. I wanted to bridge m
You could probably solve most of your problems by just bridging your
network connection on your PC.
Since you run a Linux OS, this should be a beeeze.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi
paul- wrote:
> There were some under the hood changes between 7 and 9, but nothing
> that would affect only you. You could post all the same info as you had
> done before, but not expecting to see much.
>
> And I have done a 7 to 9 upgrade with WiFi too.
And the dmseg.log_b9
29522
+--
paul- wrote:
> There were some under the hood changes between 7 and 9, but nothing
> that would affect only you. You could post all the same info as you had
> done before, but not expecting to see much.
>
> And I have done a 7 to 9 upgrade with WiFi too.
Hi Paul,
I put some files from b7 a
KeBul wrote:
> That's good news Christophe, I still have been looking at this for you -
> working on wifi firmware loading...
>
> So far I've found if there's no wpa_supplicant.conf in the boot
> partition on first boot then the wifi firmware doesn't load.
> Likewise if you turn off wifi in pCP
In another thread, someone noted that if one plans to run LMS on the rPi
(with piCorePlayer), resizing the SD card to 300MB was too small and
perhaps 2000MB would be better. That's the first I'd seen this thought.
Is this only if one plans to use the SD card for holding the cache. In
my own cas
D1eter wrote:
> Jivelite prints a lot of warning messages "libpng warning: Interlace
> handling should be turned on when using png_read_image". In an attempt
> to get rid of them I have added the libs from SqueezePlay to the library
> path for Jivelite because I never saw SqueezePlay print these
praganj wrote:
> Hi soundcheck,
>
> where can i find your alsamixer-init script ?
> I would like to use it with pCp 6.0.0b9 and Tone Board.
> You are also using Tone Board. What are your sqeezelite options ?
>
> When i start alsamixer, than i see this:
>
> 29510
>
>
> VC on LMS is set to 1
Thanks
corrobor's Profile: http://forums.slimdevices.com/member.php?userid=69872
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
___
unix mailing list
un
corrobor wrote:
> I Searched but I haven't found it ...
Change 7.9.2 to 8.0.0 in step 5
https://www.picoreplayer.org/how_to_upgrade_lms.shtml
*Server - LMS 8.0.0 *Pi4B 4GB/Flirc case/pCP 6.0.0-b9 18K library,
playlists & LMS cache on SSD (ntfs)
*Study -* Pi3B+/pCP 5.0.0/pi screen/HiFiBerry
huxmut wrote:
> yes. read back a few pages. paul has linked a help page with
> instructions
I Searched but I haven't found it ...
corrobor's Profile: http://forums.slimdevices.com/member.php?userid=69872
View this thread:
Gerhardc wrote:
> Hi Paul,
>
> after installation of audio input streamer, the RPI display shows a lot
> of ALSA error messages. After this squeezelite will no more running. A
> new image is required to build.
>
> ATTACH]29509[/ATTACH]
Yes, that is an issue Im researching. If you want to u
soundcheck wrote:
>
>
> That's when I introduced my alsamixer-init script. Since then
> everything runs smooth.
>
>
Hi soundcheck,
where can i find your alsamixer-init script ?
I would like to use it with pCp 6.0.0b9 and Tone Board.
You are also using Tone Board. What are your sqeezelite
Ok I try
corrobor's Profile: http://forums.slimdevices.com/member.php?userid=69872
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
___
unix mailing list
corrobor wrote:
> Ok. If I want to upgrade to Lms 8 is it possible?
yes. read back a few pages. paul has linked a help page with
instructions
rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 +
HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8 |
huxmut wrote:
> use the standard version. no tweaks. it is very good.
> be like miley cyrus, tweaking only if you have issues.
>
> oh wait. that might be twerking
Ok. If I want to upgrade to Lms 8 is it possible?
co
corrobor wrote:
> Please if you can tell me about some configuration to start I today will
> switch to picoreplayer. It is Sunday as I"m to home from work :)
use the standard version. no tweaks. it is very good.
be like miley cyrus, tweaking only if you have issues.
oh wait. that might be twer
corrobor wrote:
> Hi to all. I didn't know picoreplayer. I had been using moode with Lms
> and squezelite. Today I saw picoreplayer and I'm trying it.
> I need some advice to set it at the best.
> I have raspberry 4 with 4gb of ram. It is connected to my amplifier by
> usb because my amplifier h
paul- wrote:
> I have not forgot about this. I did confirm there is a problem here.
> Just not sure yet where it broke.
Hi Paul,
after installation of audio input streamer, the RPI display shows a lot
of ALSA error messages. After this squeezelite will no more running. A
new image is requir
33 matches
Mail list logo