paul- wrote:
> I have not found a way to have two screens and HDMI audio working on
> pCP. For multiple screens, You probably need to be running an Xorg
> solution.
Okay. I had come across multiple tutorials on setting up
squeezelite/jivelight on raspian. I've heard it's not quite the same
paul- wrote:
> So I re-read my post here
> https://forums.slimdevices.com/showthread.php?114828-Announce-piCorePlayer-8-0-0&p=1029240&viewfull=1#post1029240
> I think when I did this test, I did not use the vc4-kms-v3d driver. I
> made only the changes listed in the post, and then used the con
Paul Webster wrote:
> Most internet radio stations are 44.1KHz (like a CD) some are 48KHz
> (like DAB radio - e.g. BBC).
> You can usually see what is playing via the "More" function in the web
> UI.
That's what I thought you were getting at. So, current song playing is
at 44.1 sample rate (fr
Paul Webster wrote:
> Also ... try different sources including 48kHz and 44.1KHz
I thought I might be able to figure this one out, but having some
issues. Where do I need to do this?
AnaximanderThales's Profile:
http://
paul- wrote:
> That doesn't need to be in asound.conf. Alsa handles it directly.
Ahh! It has been a long while. Thank you.
AnaximanderThales's Profile:
http://forums.slimdevices.com/member.php?userid=73206
View this t
Paul Webster wrote:
> Try pushing the volume up in LMS and in the TV just in case that is the
> issue (it was for me once).
TV volume is sitting at 50, and the volume slider on the web interface
of LMS is maxed, and I can confirm that alsa volume is at fixed volume
(I assume that's default for H
Okay -- hdmi wasn't plugged in securely, so iec958:CARD=vc4hdmi,DEV=0
does get squeezelite running, however still no sound.
Examining the /etc/asound.conf (in diagnostics) there is no vc4hdmi,
just headphones:
Code:
# default - Generated by piCorePlayer
pcm.!defaul
Paul Webster wrote:
> In the pCP web page ... the section headed "Change Squeezelite settings"
> has "Squeezelite command string" at the bottom ... with a "more" link.
> Click "more" and you will see the command line that pCP is using.
> From ssh session ... run the same command and capture the
Paul Webster wrote:
> If the device was listed when clicking more in pCP web interface then
> it really should have been OK for Squeezelite- at least to run.
>
> You could try running Squeezelite from the command line (pCP can be
> coaxed to show you what it is using) and then you might see a
Paul Webster wrote:
> On pCP 8 - with KMS - set the Squeezelite output to go to the IEC device
> to get audio on HDMI.
I believe that you are replying to me -- I did accidentally leave that
out. I have tried all of the vc4hdmi outputs:
IEC958, Default, Card, etc. All of those leaves Squeezebo
I had pCP setup before this, I am pretty sure it was pCP7, but I did not
keep a backup to verify that. When this worked, the album info
displayed on the 7" screen, and the rainbow test screen would display on
the TV (assuming it was on).
The hardware is rPi 3B v1.2. Despite all the documentati
11 matches
Mail list logo