bluetdi wrote:
> Thanks for your answers.
>
> I read some reviews of PS for the Pi with a 7"-screen and now ordered
> the official one. It will be delivered tomorrow and I hope it has enough
> power for both so the lighning disappears. My other 2 Pi with screen
> dont have this problem so I
doggod wrote:
> "-maybe it's the LMS that is the problem-?!?" And it sure was!
>
Whoops! Trying to wake up the wrong box!
>
> I've no idea how much work it is with things so hope I won't offend
> youPcP guys but maybe it would be a better function if the "Pcp bootup
> WoL thing" would
Greg Erskine wrote:
> Yes, "NIC" is the the transmitting computer.
>
> The form gets its input from the config file, so what you see is what
> is/will be saved. (/usr/local/etc/pcp/pcp.cfg)
>
> You can view "pCP Configuration" via [Main Page] > [Diagnostics] >
> [Logs] > "pCP Configuration"
>
doggod wrote:
> Refering to Greg Erskine in >
> https://forums.slimdevices.com/showthread.php?111787-ANNOUNCE-piCorePlayer-6-0-0=1002642=1#post1002642
>
> it seems like there isn't any "ether-wake" logging? So seemingly no way
> to find out exactly what's going on. It would be interesting if
doggod wrote:
> Thanks for your time answering, but no neither is on wifi. And as I
> wrote, WoL works fine when I manually send it from the Pi. Hence my
> "could it be that the WoL packet is sent" too early", e.g before the Pi
> 's NIC has connected properly?
If those settings are correct as
doggod wrote:
> Ok so I checked the pcp.cfg file and it sure looks like my correct
> settings is saved there but sadly still no go, i.e my server doesn.t
> wake up when PcP boot.
>
> WOL="yes"
> WOL_NIC="eth0"
> WOL_LMSMACADDRESS="my_servers_mac"
>
> Had to google a bit to find the correct
kbeast wrote:
> It seems like its not switching to the right output
To try and explain better, it seems if i go from 24 bit to 24 bit, 192k
theres no audio, but to a like an mp3 to 24/192 its ok.
kbeast's Profile: h
So i can get it to play 24/192 but even during same session it tends to
be no audio. I have to toggle the sound card to various things to get
it work again. Other bitrates play ok. Using ethernet or wifi, doesn't
matter. It seems like its not switching to the right output
kidstypike wrote:
> On your screen > Settings > Screen > Now Playing > Now Playing views,
> put a dot in all those you require.
>
> This is assuming you're controlling the Squeezelite player on the same
> RPi as the screen. You won't see "Spectrum Analyzer" or "Analog VU
> meters" options if
kidstypike wrote:
> On your screen > Settings > Screen > Now Playing > Now Playing views,
> put a dot in all those you require.
>
> This is assuming you're controlling the Squeezelite player on the same
> RPi as the screen. You won't see "Spectrum Analyzer" or "Analog VU
> meters" options if
I somehow lost the VU Meters and dancing bars from the Now Playing Views
and is only showing artwork.
Not sure how to get these back, would hate to have to do this from
scratch again..
kbeast's Profile:
paul- wrote:
> No. It should not hurt anything other than an extra second or two on
> startup
Sorry let me rephrase, how can I get picoreplayer to disable wifi when
ethernet is in use rather than me running a script
I was curious if theres a way to disable wifo when it has a valid
ethernwt connection. I'm running a script at startup now but it's hit
or miss
kbeast's Profile: http://forums.slimdevices.com/member.php?userid=4761
View
huxmut wrote:
> you could try another distro to try to isolate the issue
> maybe volumio to see if hi-res works under that OS
Good idea. I reseated the card and it works now. Wonder if the
heatsink or something is resting on the card
paul- wrote:
>
> I would just start with a new SD card, and transfer settings over.
> or at least make a backup of your card before you try an update.
Good idea and this is the approach i took. Everything working but I
can't get playback from 24 bit 192k files, get low static/feedback.
paul- wrote:
>
> I would just start with a new SD card, and transfer settings over.
> or at least make a backup of your card before you try an update.
Good idea and this is the approach i took. Everything working but I
can't get playback from 24 bit 192k files, get low static/feedback.
paul- wrote:
>
> I would just start with a new SD card, and transfer settings over.
> or at least make a backup of your card before you try an update.
Good idea and this is the approach i toom. Everything working but I
can't get playback from 24 bit 192k files, get low static/feedback.
I'm running a beta version that has a lot of custom things on it and i
dont really want to upgrade it to have to go through all the steps
again.. Im all for a performance boost or sound quality bump. Wifi
struggles to play 24/192 files but it has the ethernet capability so im
ok with that.
Jeff07971 wrote:
>
> I have posted a script here
> https://forums.slimdevices.com/showthread.php?106895-Running-picoreplayer-over-a-VPN=875306=1#post875306
> This will check if the Pcp is on the local network and prevent a VPN
> being connected and if not connect the VPN
>
> >
Code:
paul- wrote:
> I meant to say work well. It does not deal well with interface changes.
> I suspect vpn is creating an interface.when you go back to a
> non-vpn interface, don't be surprised if you have a problem.
lol. I've been toggling a little bit and getting varied results, but
I'm
Jeff07971 wrote:
> I often run Pcp over a VPN
>
> I have posted a script here
> https://forums.slimdevices.com/showthread.php?106895-Running-picoreplayer-over-a-VPN=875306=1#post875306
> This will check if the Pcp is on the local network and prevent a VPN
> being connected and if not connect
Interestingly enough i got it working. I had to go to advanced > remote
libraries, then punch in my IP address of my LMS and I was good to go.
I think i can script something based on the wifi to connect to the vpn
or not. I'm not overly concerned because this is going to be my travel
player
I'm running picoreplayer 6b7 and managed to get wifi and openvpn working
tethered from my cell phone. I currently have the official touchscreen
attached and when it's connected with VPN, audio plays if control it
with a seperate controller. When I try to use the touchscreen, it can't
find my
paul- wrote:
> Some users are using openvpn. Just make a script and put it in the user
> commands on the tweaks page. That will get run at boot time.
>
> You should be able to find the threads searching, if not create a new
> thread. It will not get found again buried in here.
Appreciate
Kinda a stretch and not sure if it's the right place. I put v6 on a 3b
with no issues.
I vpn to my house to access my music, typically use my phone and an
android sb player and remote. Is there a way to implement vpn at boot
so i could connect when not on my home network? Im using
mr-b wrote:
> In case it helps anyone, I ended up having to expand the filesystem to
> 1000MB to cope with the library scan.
>
> >
Code:
> >
> FilesystemSize Used Available Use% Mounted on
> /dev/mmcblk0p2 964.4M650.8M269.4M
I realize this is a bit old, but helped me get started using odroid xu4.
I got a blue dotted emmc and basically ran updates, then installed the
debian arm package mentioned above, works great so far. All through
ssh.
Will have to see speedwise and ability to handle multiple clients but so
far
paul- wrote:
> It's likely in the Y connector plug. Do you have the tools to measure
> voltage at the boards. It should be pretty safe to bump up your power
> supply to 5.1v, but it would be best if you can do that while checking
> the voltage at the board.
Been fine all day after reseating
paul- wrote:
> What is your actual voltage at the power supply., and the current rating
> of the supply?
>
> But you are likely seeing too much voltage drop across all the
> connectors.
So according the power suppliies display, with just the pi hooked up,
5.02 and. 298 but sometimes hits.
slartibartfast wrote:
> What length is your USB cable?
>
I am using 6 footers. Ive tried some shorter ones too
kbeast's Profile: http://forums.slimdevices.com/member.php?userid=4761
View this thread:
I have a duplicate setups, using a pi2, hifi berry pro+ with jumper off
using coax digital out. Using official pi screen and y adapter to a
nobsound g1 Regulated Linear Power Supply supply. Im using ankers more
expensive usb cable that comes with a fancy case, but ive tried a ton.
I upgraded to 4 beta 6 no issues. When i went to confirm latest version
and what version i actually had (audio, realtime), i upgraded ontop.
While it was upgrading i refresh the page by mistake trying to look at
the verbose information.. It upgraded ok but wiped my config out.
Not a huge
Not sure if this is a jivelite request or not, bit would love to see
this information on tjr Now Playing screens and elsewhere... Similar to
Squeeze Ctrl on Android.
kbeast's Profile:
Not sure where this falls, if its a jivelite thing or not. But was
wonderinv if possible to add bot depth and sample rate info onto the now
playing screens/vu metera
kbeast's Profile:
kbeast wrote:
> Is it me or has ghe audio changed in 3.20 from 3.02 where the treble is
> a bit forward/artifical?
> Im using pi2 with hifiberry digi+ and 3.20audio that uses optical into a
> schiit bifrost uber dac (most of the time).
I tried a new dac, sound blaster e5, same
icebreaker wrote:
>
> Hifiberry AMP (and +)
>
This is what i selected, then chose not to reboot and looked at the list
asin and the digi+ was there..
Not sure if doing it from a PC rather than phone wouldve helped..
icebreaker wrote:
> I have tried a few times to reflash the card. I have also tried both
> Images and also the older Version.
> Still no other Cards in the Dropdown menu.
>
> Regards Ice
I had similar issue, select the hifi digi+, (i believe). It'll ask to
reboot, click no, now select your
Is it me or has ghe audio changed in 3.20 from 3.02 where the treble is
a bit forward/artifical?
Im using pi2 with hifiberry digi+ and 3.20audio that uses optical into a
schiit bifrost uber dac (most of the time).
I have a pi2 with a Hiberry Digi+ using optical out to a Schiit Bifrost
Uber. Is it me or the treble a bit artificial sounding now using 3.20,
specifically like high hats and cymbals.
kbeast's Profile:
39 matches
Mail list logo
