CJS wrote:
> I don't know if you are using piCorePlayer as a player or as LMS server
> or both, but I see that your Squeezelite version is not up to date.
>
> On my RPi ZeroW player I have the following software versions:
> piCorePlayer v7.0.1 | www v00016 | linux 5.4.83-pcpCore | piCore
>
Hello, I orginally posted this under the Spotty thread but I think
running the update to 7.0.1 is what may have broken things.
I'm not 100% sure this is the culprit but It was the last thing I did
before I notice the problem.
System-LMS: 8.1.1 piCorePlayer v7.0.1 | linux 5.4.83-pcpCore-v7 |
Jeff07971 wrote:
> As others have said Jivelite IS the controller that sends control
> signals via IP to the server.
>
> To do control of the central player at each TV location you could just
> have a Pi + Screen running Jivelite set to monitor the central player.
>
> I'm relatively sure you
Jeff07971 wrote:
> So Jivelite runs on the centralised player and you distribute the OSD to
> all the TVs in the house ?
>
> And you want to be able to control the central player from any TV
> location ?
Yes, I was asking if I could do this via IP but this appears to not be
possible. I have
Greg Erskine wrote:
> hi trans_lux,
>
> Are you using the right termology? Jivelite is the screen display
> software, usually working on RPF 7" touch screen. Jivelite is controlled
> via the touch screen, a keyboard or IR, but you would expect to be in
> front of t
mherger wrote:
> > I currently have limited IP control and feedback of any squeezebox
> > player, hardware or software based. I want simple dnav and transport
> > control of Jivelite for use with a handheld remote. Iâm just going
> to
> > use IR.
>
> I think you're not getting my point: do
mherger wrote:
> > Sorry if this has been asked but is it possible to control Jivelite
> via
> > IP or a browser?
>
> Do you really want to control Jivelite, or the music playing? Jivelite
> is a controller to control playback. The latter could be done using IP
> (CLI or JSON/RPC calls). But
Sorry if this has been asked but is it possible to control Jivelite via
IP or a browser?
My use case is I have a picoreplayer connected to a video distribution
system located in a rack in the basement.
I currently have LMS integrated with Crestron IP control using an old
Controlworks module but
Updated to 4.1 and successfully expanded the entire 64gb card.
I have a 256gb & a 512gb Ill try next.
Having a portable picoreplayer with 512gb of high res music would be
great for traveling.
trans_lux's Profile:
Possible to use the HiFiBerry DAC+ ADC with analog inputs with
PicorePlayer? Im thinking that Id like to plug-in a turntable via a
phono stage, ultimately using the Pi as a preamp for an external analog
source.
Hello, wanted to check in and see if theres been any resolution to
expanding the file partition on a 64gb card and above before I breakdown
and spend $8.99 on a 32go ;).
trans_lux's Profile:
Greg Erskine wrote:
> hi trans_lux,
>
> What was the Brand and model of the card?
>
> regards
> Greg
Tried a couple different cards, same results with 4.0, 3.5 is ok
Micro Center 64GB microSDXC Class 10
SanDisk 64GB Ultra Plus microSDHC Class 10
16GB Pny microSDHC Cl
Greg Erskine wrote:
> Can we determine if there is a problem "resizing whole" with all 64GB SD
> cards or only some.
>
> Please report success/failure of SD card and details, Brand name, model
> etc
>
> I would hate to fork out the money for a test 64GB SD card (that I don't
> need) and find
paul- wrote:
> Something is broke on the 64 gb cards when using full size. We dont
> normally test that big of a card.
>
>
> Expand the card to 500mbThen create a 3rd partition for the LMS data.
> There is no automated way to do it, are you okay with fdisk and mkfs?
Thanks for the prompt
1st off thanks so much for continuing the hard work on this wonderful
project.
Fresh install of pCP4.0.0 standard on freshly formatted 64gb SD card in
a Pi3 if I select use whole SD card end up stuck on a shell prompt after
reboot.
1000 MB resize works fine but need more space for DB with 80k+
paul- wrote:
> There are no power savings features enabled or used in pCP. Where is
> your music stored, if the music is stored on a NAS, it is entirely
> possible that the NAS is going to sleep, causing the pi to wait.
Yes, music is on a Synology DS1817+ but I don't think that's it.
Have
Pretty sure I'm experiencing what I would consider the PI hibernating.
Every a.m. it takes a min. or so for LMS & the pCP web pages to become
active.
After that it's all is good until another extend period of no use.
Possible to resolve?
paul- wrote:
> What is the remote device? Is it rebooting too.
Hum I think I broke something, pCP via web gui has become unresponsive.
Let me start over and see what we get.
trans_lux's Profile:
paul- wrote:
> What is the remote device? Is it rebooting too.
Paul thanks for the quick response.
Remote device is a Synology NAS that does not reboot.
I tried both CIFS with auth & NFS with no auth and have the same
results.
I've been using the same share across several other systems
All my audio issues sorted I'm having issues with my mounted network
drive connecting after a reboot of LMS.
After each reboot of LMS I have disabled then re-enable the drive for
LMS to see the content then perform a rescan.
Any ideas on a resolution?
Thanks
trans_lux wrote:
> Hello
>
> First thank you for all the hard work that has clearly has gone into
> this project.
>
> I'm running piCorePlayer v3.20 | linux 4.9.21-pcpCore_v7 | piCore v8.01
> | Squeezelite v1.8.6-986 with a Audioquest Dragonfly Red.
> Currently th
Hello
First thank you for all the hard work that has clearly has gone into
this project.
I'm running piCorePlayer v3.20 | linux 4.9.21-pcpCore_v7 | piCore v8.01
| Squeezelite v1.8.6-986 with a Audioquest Dragonfly Red.
Currently this is a bedside solution for headphones only.
I'm having
I'm having a strange issue with what I think I have narrowed down to
Squeezelite.
What is happening is after playing streaming radio for an extended
period of time -greater than 24 hours- loud almost DC like distortion
occurs. Only cure is a full reboot then it's good for another 24 hours
or so.
sbp wrote:
Hi have you tried the piCorePlayer? It is also bases on the squeezelite.
Steen
I have not.
Can you point me to a guide on how to install?
Sent from the dark side of the moon
trans_lux's Profile:
I'm having a strange issue with what I think I have narrowed down to
Squeezelite.
What is happening is after playing streaming radio for an extended
period of time -greater than 24 hours- loud almost DC like distortion
occurs. Only cure is a full reboot then it's good for another 24 hours
or so.
in syslog - try
dmesg | tail or so
I tried it with and without the smb: and got the same error
Also i followed this guide
https://wiki.ubuntu.com/MountWindowsSharesPermanently
--
trans_lux
trans_lux's Profile: http
but its
working!
--
trans_lux
trans_lux's Profile: http://forums.slimdevices.com/member.php?userid=9921
View this thread: http://forums.slimdevices.com/showthread.php?t=81588
tried smb:\\WHS\Music, \\WHS\Music, \WHS\Music, WHS\Music and
the 10.1.100.3\Music
All with no luck?
Any direction on this would be greatly appreciated.
--
trans_lux
trans_lux's Profile: http://forums.slimdevices.com
28 matches
Mail list logo