Re: Different borders for a group

to have different border widths and colors > for the top and the bottom of a group ? > Or should I include graphic lines inside the group ? > > Thank you in advance. > jbv > > ___ > use-livecode mailing list > use-live

Different borders for a group

Hi list, Is there a way to have different border widths and colors for the top and the bottom of a group ? Or should I include graphic lines inside the group ? Thank you in advance. jbv ___ use-livecode mailing list use-livecode@lists.runrev.com

Re: Group corners

It's probably about time to submit a bug report. The behavior we see isn't expected. On 8/22/23 12:12 PM, Dar Scott via use-livecode wrote: Arg. There is a pixel missing in the upper left corner even when the border width is 1. — Dar On Aug 22, 2023, at 7:05

Re: Group corners

Arg. There is a pixel missing in the upper left corner even when the border width is 1. — Dar > On Aug 22, 2023, at 7:05 AM, Dar Scott via use-livecode > wrote: > > Yeah, the order of things seem to make a difference. It is sometimes hard to > do deltas. My lazy programming style is to

Re: Group corners

Yeah, the order of things seem to make a difference. It is sometimes hard to do deltas. My lazy programming style is to rebuild GUI features based on the current state whenever there is a change, and then look closer if that gets slow. > On Aug 21, 2023, at 7:44 PM, J. Landman Gay via

Re: Group corners

Right, but the weird thing is that with a 4-pixel border and 3d, it isn't 3d. It's a plain gray border with the label appropriately placed. Three pixels works about the same. -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActive Software | http://www.hyperactivesw.com On August 21,

Re: Group corners

Oh right! You can’t have 3D with a 1 pixel border, can you?? I missed that. Bob S > On Aug 21, 2023, at 3:07 PM, J. Landman Gay via use-livecode > wrote: > > On 8/21/23 11:50 AM, Dar Scott via use-livecode wrote: >> For now, I’m using a temporary solution: I am setting the border width to

Re: Group corners

On 8/21/23 11:50 AM, Dar Scott via use-livecode wrote: For now, I’m using a temporary solution: I am setting the border width to 1. That might become a long-term workaround. I can reproduce your results. Weird thing: if I leave showName and showBorder on, and set the borderWidth to 4, and

Re: Group corners

me does not change the border or background; it just >> puts a label over it. >> * The background is in the back and extends consistently to either the >> inside of the border, the middle of the border or outside edge of the >> border. The background for the name labe

Re: Group corners

r or background; it just puts > a label over it. > * The background is in the back and extends consistently to either the inside > of the border, the middle of the border or outside edge of the border. The > background for the name label is the same as that for the group including the

Re: Group corners

is in the back and extends consistently to either the inside of the border, the middle of the border or outside edge of the border. The background for the name label is the same as that for the group including the opaque modifier, so a blip of background might extend above the top border

Re: Group corners

I see those kind of changes (10.0.0DP5, MacOS), but the border changes from solid black to black/white lines - with those 'splits' you described. Alex. On 21/08/2023 01:50, Dar Scott via use-livecode wrote: On Mac and LiveCode 9.6.9… Make a new stack. Put a few controls on it. Group them

Re: Group corners

On Mac and LiveCode 9.6.9… Make a new stack. Put a few controls on it. Group them. Give the group a name Set the border width to something like 10-15 so the effect is visible. Turn off 3D. Turn on border. Now, turn show name on and off. When show name is off, the border looks good. When

Re: Group corners

Weird how? The corners should be right angles. Do you see something different? -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActive Software | http://www.hyperactivesw.com On August 18, 2023 3:47:34 PM Dar Scott via use-livecode wrote: If I turn off 3D for a group, the corners

Group corners

If I turn off 3D for a group, the corners of the rectangle are weird. Advice? — Dar ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http

Re: Positioning object in a loclocked group (Klaus major-k)

Klaus: I am working with LC 9.6.1 Indy on a Dell PC running Windows 10. I first find a point in the group (in this case the topleft of btn "Button 1" Adjust it a little and then set the topright of the newly created button "New Button". This would be the equivalent of y

Re: Positioning object in a loclocked group

That happened to me once and it turned out that I had a duplicate invisible control that was moving instead. If you turn on "show invisibles" you might find something. The extra control may not even be in the same group. -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActiv

Re: Positioning object in a loclocked group

Hi Richard and all, > Am 15.04.2021 um 18:07 schrieb Richard Gaskin via use-livecode > : > > Klaus Major wrote: >> I have a group set to 600*600 pixel and loclocked. >> Inside of the group there are two invisible objects, a button and a graphic. >> Now if I: &g

Re: Positioning object in a loclocked group

On 4/15/21 8:16 AM, Klaus major-k via use-livecode wrote: Then the button stays however in the topleft corner of the group. Even moving the button some pixels to right or down does not work. Why, oh, why? :-) Thanks for any insight! Is it any different if you lock messages? -- Mark Wieder

Re: Positioning object in a loclocked group

Klaus Major wrote: I have a group set to 600*600 pixel and loclocked. Inside of the group there are two invisible objects, a button and a graphic. Now if I: ... create btn "b1" in grp "THE group" ## and set the loc of btn "b1" of grp "THE group" to

Re: Positioning object in a loclocked group

Hi Stepehen, > Am 15.04.2021 um 17:32 schrieb Stephen Barncard via use-livecode > : > > Well for one thing there’s a keyword in the name of the object. > Try using a name like “TheGroup” since this is a string, it does not matter! The actual name of my group is "galeri

Re: Positioning object in a loclocked group

Well for one thing there’s a keyword in the name of the object. Try using a name like “TheGroup” On Thu, Apr 15, 2021 at 08:17 Klaus major-k via use-livecode < use-livecode@lists.runrev.com> wrote: > Hi all, > > I am sure there is a technical reason for this! 8-) > > I ha

Re: Positioning object in a loclocked group

I find positioning objects by script inside a location locked groups to be very non-intuitive as well. I wish there was a mode by which all object in a group - in the special mode - could be set and referenced by coordinates relative to the group. Something like set the relative loc of btn

Positioning object in a loclocked group

Hi all, I am sure there is a technical reason for this! 8-) I have a group set to 600*600 pixel and loclocked. Inside of the group there are two invisible objects, a button and a graphic. Now if I: ... create btn "b1" in grp "THE group" ## and set the loc of btn &q

Re: disabling a group

button that was assigned to several groups made up of two graphic controls to represent a toggle switch. By setting one custom property the whole appearance of the group can easily be changed. I predefined the colours for each state in more custom properties, I’m sure this could be adapted to suit

Re: disabling a group

I have just used setProp in a behaviour button that was assigned to several groups made up of two graphic controls to represent a toggle switch. By setting one custom property the whole appearance of the group can easily be changed. I predefined the colours for each state in more custom

RE: disabling a group

, 2021 1:04 PM To: How to use LiveCode Cc: j...@souslelogo.com Subject: Re: disabling a group Le 2021-01-13 15:34, Mark Wieder via use-livecode a écrit : > On 1/13/21 11:32 AM, jbv via use-livecode wrote: >> Hi list, >> I have a group that contains various controls, including grap

Re: disabling a group

Le 2021-01-13 15:34, Mark Wieder via use-livecode a écrit : On 1/13/21 11:32 AM, jbv via use-livecode wrote: Hi list, I have a group that contains various controls, including graphic objects. When I disable the group, the colors of every object becomes lighter, except for graphics whose

Re: disabling a group

On 1/13/21 11:32 AM, jbv via use-livecode wrote: Hi list, I have a group that contains various controls, including graphic objects. When I disable the group, the colors of every object becomes lighter, except for graphics whose colors remain the same. What is the best way to make colors

disabling a group

Hi list, I have a group that contains various controls, including graphic objects. When I disable the group, the colors of every object becomes lighter, except for graphics whose colors remain the same. What is the best way to make colors of graphics become lighter when the group is disabled

Re: Script Editor freezes in Windows 10 (was Can't edit scripts in DataGrid group in Windows 10)

Thanks mark I will check this out. Martin > On Oct 23, 2020, at 4:45 PM, Mark Wieder via use-livecode > wrote: > > Brian Milby's Script Tracker ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe,

Re: Script Editor freezes in Windows 10 (was Can't edit scripts in DataGrid group in Windows 10)

On 10/23/20 6:44 AM, Martin Koob via use-livecode wrote: I figured out what caused it. I am using Monte’s lcVCS plugin to keep the project in bitbucket Try Brian Milby's Script Tracker plugin. -- Mark Wieder ahsoftw...@gmail.com ___

Re: IDE Hang When Exiting. (was Can't edit scripts in DataGrid group in Windows 10)

de-boun...@lists.runrev.com] On Behalf > Of Martin Koob via use-livecode > Sent: Thursday, October 22, 2020 7:53 PM > To: How to use LiveCode > Cc: Martin Koob > Subject: Re: IDE Hang When Exiting. (was Can't edit scripts in DataGrid group > in Windows 10) > > Hi Ralph > >

Re: Script Editor freezes in Windows 10 (was Can't edit scripts in DataGrid group in Windows 10)

;> Hi again, >>> >>> Sorry just re-read my previous email and realized it is not clear. >>> >>> I meant to say that is that I get the same issue where the IDE stops >>> responding when I try to edit the main stack script too. So it is not a >>

RE: IDE Hang When Exiting. (was Can't edit scripts in DataGrid group in Windows 10)

use-livecode [mailto:use-livecode-boun...@lists.runrev.com] On Behalf Of Martin Koob via use-livecode Sent: Thursday, October 22, 2020 7:53 PM To: How to use LiveCode Cc: Martin Koob Subject: Re: IDE Hang When Exiting. (was Can't edit scripts in DataGrid group in Windows 10) Hi Ralph I generally e

Re: Script Editor freezes in Windows 10 (was Can't edit scripts in DataGrid group in Windows 10)

ct 22, 2020, at 8:05 PM, Martin Koob via use-livecode >>> wrote: >>> >>> Hi >>> >>> Just to follow up. It is not just happening in a DataGrid group script. I >>> just opened a main stack script. It has almost 600 lines. >>>

Re: Can't edit scripts in DataGrid group in Windows 10

aGrids with script in the group > that contains the DataGrid in addition to the behaviour script of the > DataGrid. So to edit the script in the DataGrid group I just select the > Datagrid group I right click on the DataGrid and select the ‘Edit Script’ > menu item. > > This wo

Re: Script Editor freezes in Windows 10 (was Can't edit scripts in DataGrid group in Windows 10)

Hi Martin In the Script Editor try unchecking the various entries under Edit/Options e.g. variable checking, live errors, etc. I've recently moved to using LC on OS X and was surprised how snappy the editor was i.e. I didn't need to switch off most of those things as I did on Windows 10. I

Re: Script Editor freezes in Windows 10 (was Can't edit scripts in DataGrid group in Windows 10)

>> Hi >> >> Just to follow up. It is not just happening in a DataGrid group script. I >> just opened a main stack script. It has almost 600 lines. >> >> Something Odd going on. I am just new to using LiveCode on Windows as I am >> now working on an applicat

Re: Script Editor freezes in Windows 10 (was Can't edit scripts in DataGrid group in Windows 10)

tin Koob via use-livecode > wrote: > > Hi > > Just to follow up. It is not just happening in a DataGrid group script. I > just opened a main stack script. It has almost 600 lines. > > Something Odd going on. I am just new to using LiveCode on Windows as I am >

Script Editor freezes in Windows 10 (was Can't edit scripts in DataGrid group in Windows 10)

Hi Just to follow up. It is not just happening in a DataGrid group script. I just opened a main stack script. It has almost 600 lines. Something Odd going on. I am just new to using LiveCode on Windows as I am now working on an application for release on Mac and Windows. However I have

Re: IDE Hang When Exiting. (was Can't edit scripts in DataGrid group in Windows 10)

m: use-livecode [mailto:use-livecode-boun...@lists.runrev.com] On Behalf > Of Martin Koob via use-livecode > Sent: Thursday, October 22, 2020 5:19 PM > To: use-livecode list > Cc: Martin Koob > Subject: Can't edit scripts in DataGrid group in Windows 10 > > Hi all > >

IDE Hang When Exiting. (was Can't edit scripts in DataGrid group in Windows 10)

Of Martin Koob via use-livecode Sent: Thursday, October 22, 2020 5:19 PM To: use-livecode list Cc: Martin Koob Subject: Can't edit scripts in DataGrid group in Windows 10 Hi all Maybe this is not good practice but I have DataGrids with script in the group that contains the DataGrid i

Can't edit scripts in DataGrid group in Windows 10

Hi all Maybe this is not good practice but I have DataGrids with script in the group that contains the DataGrid in addition to the behaviour script of the DataGrid. So to edit the script in the DataGrid group I just select the Datagrid group I right click on the DataGrid and select the ‘Edit

Re: How to get layer for group

I think Control in Group is the phrase that pays here. The property you are looking for is relayerGroupedControls. Bob S > On Sep 17, 2020, at 2:32 PM, Peter Bogdanoff via use-livecode > wrote: > > I believe this is one of the commands/properties that require you to be on

Re: How to get layer for group

ot;checkHtml" > 3 then > set the layer of fld "checkHtml" to 3 > else > set the layer of fld "checkHtml" to 20 > end if > > # do not work. > > stack "SlideShowSetUp": execution error at lin

How to get layer for group

f the layer of fld "checkHtml" > 3 then set the layer of fld "checkHtml" to 3 else set the layer of fld "checkHtml" to 20 end if # do not work. stack "SlideShowSetUp": execution error at line 107 (Object: can't set

Re: THIS group

hypothetical and rhetorical: what would be the difference between the owner of the owner of the owner of the owner of me and the owner of the owner of the owner of this group ? halfpennies worth: 'this group' gives no greater benefit and does not fit in with the current use of 'this card

Re: THIS group

I see how it could work if a child control referenced "this group" but what should happen if: You type "the name of this group" into the message box? The child control is in a nested group? On 9/14/20 1:18 PM, Ralph DiMola via use-livecode wrote: I can see why the mothe

Re: THIS group

Ji Ralph, > Am 14.09.2020 um 20:18 schrieb Ralph DiMola via use-livecode > : > > I can see why the mother ship does not like synonyms. In this case I think > it would be advantageous for new users if "this" was extended so that "this > group" was the same

RE: THIS group

I can see why the mother ship does not like synonyms. In this case I think it would be advantageous for new users if "this" was extended so that "this group" was the same as "the owner of the target". I found myself digging around until I found "the owner of th

Re: THIS group

Hi Mark, > Am 14.09.2020 um 17:49 schrieb Mark Wieder via use-livecode > : > > On 9/14/20 8:35 AM, Klaus major-k via use-livecode wrote: > >> thank your for your encouraging words! :-D > > LOL. Well, having been down that rabbit hole before, I just thought I'd > mention it. yes, and as I

Re: THIS group

On 9/14/20 8:35 AM, Klaus major-k via use-livecode wrote: thank your for your encouraging words! :-D LOL. Well, having been down that rabbit hole before, I just thought I'd mention it. -- Mark Wieder ahsoftw...@gmail.com ___ use-livecode

Re: THIS group

Hi Mark, > Am 14.09.2020 um 17:33 schrieb Mark Wieder via use-livecode > : > > On 9/14/20 2:00 AM, Klaus major-k via use-livecode wrote: >> Hi friends, >> I just field an enhancement request to make THIS also work for groups. >> ... of THIS GROUP >> <https

Re: THIS group

On 9/14/20 2:00 AM, Klaus major-k via use-livecode wrote: Hi friends, I just field an enhancement request to make THIS also work for groups. ... of THIS GROUP <https://quality.livecode.com/show_bug.cgi?id=22906> Would be a helpful addition. Currently THIS only works for cards and

Re: THIS group

Hi Matthias, > Am 14.09.2020 um 14:10 schrieb matthias rebbe via use-livecode > : > > But which group shall be "this group" if there are nested groups and a script > in a button, which is in a "sub" group, uses "this group"? well, this would of co

Re: THIS group

But which group shall be "this group" if there are nested groups and a script in a button, which is in a "sub" group, uses "this group"? - Matthias Rebbe Life Is Too Short For Boring Code > Am 14.09.2020 um 11:00 schrieb Klaus major-k via use-livecode >

THIS group

Hi friends, I just field an enhancement request to make THIS also work for groups. ... of THIS GROUP <https://quality.livecode.com/show_bug.cgi?id=22906> Would be a helpful addition. Currently THIS only works for cards and stacks. Best Klaus -- Klaus Major https://www.major-k.de kl...

Re: Adding items to a group

ode@lists.runrev.com> wrote: > Also, Geoff Canyon wrote a GREAT utility called Navigator, which among > other things, allows you to drag objects around in a hierarchical list. If > you drag an object in a group to somewhere outside that group, into another > group let’s say, it doe

Re: Adding items to a group

Also, Geoff Canyon wrote a GREAT utility called Navigator, which among other things, allows you to drag objects around in a hierarchical list. If you drag an object in a group to somewhere outside that group, into another group let’s say, it does all the relaying for you. I cannot tell you how

Re: Adding items to a group

Thanks very much Mark, the relayer command is exactly what I needed. relayer field “xx” to the front of group “thePoem” —adds the field to the poem group at the top of the group relayer field “xx” after group “thePoem” —removes the field from the poem group and leaves it in front of the group

Re: Adding items to a group

On 2020-08-26 10:06, Jimmieson, Phil via use-livecode wrote: One thing I’m considering is having a set of dummy hidden items already in the group and making one of those look like the word the user just dragged in - thus it’s already a member of the group and can be scrolled etc with the rest

Adding items to a group

of words above the poem area. Currently I am doing this by ungrouping the poem, adding the new field to the list of group items and then re-grouping everything. I know you can reorder group items, and move things in from outside, but the documentation seems to suggest that the number of items

Re: Moving object out of a group

Can this help https://forums.livecode.com/viewtopic.php?f=7=32494=178858#p178858 Mic ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences:

Re: Moving object out of a group

I don’t hate it but it can be a little frustrating and awkward. It’s still better than it was in v8 and than the application manager. It desperately needs a refresh button. And layering needs a rethink/overhaul. V10 maybe. Looking at the bug list there are heaps for PB that have/will not be

Re: Moving object out of a group

Mark meandedered, > > On 6/15/20 12:32 PM, doc hawk via use-livecode wrote: >> by scripting the past. > I thought Jacque was the only who had that superpower… She had been, but no longer was, once I adjust it. (Gosh,inter- temporal grammar is hard . . .)

Re: Moving object out of a group

Mark mumbled, > Have I mentioned lately how much I hate the Project Browser? I still find it far too painful to use. A couple of times a year to work around another bug or crash situation, but that’s it. ___ use-livecode mailing list

Re: Moving object out of a group

On 6/16/20 9:02 AM, doc hawk via use-livecode wrote: The only consistent way I have found to put something between others is to cut and paste *all* items of higher layer number than you want it to land at, and paste them back (which would be a problem for shared groups!) Yes. That's what I

Re: Moving object out of a group

Mark mentioned, > > The only way I can ever do something like this is with the messagebox command > line. There appears to be something generally wrong when trying to manipulate the layers of objects when groups are involved. I think this goes back (at least) to version 5. The only

Re: Moving object out of a group

On 6/15/20 10:00 PM, J. Landman Gay via use-livecode wrote: Kind of, but I'm not very good at it. Look at what happened. Now I'm afraid to go back and try to fix it. Not throwing shade here, but there are a few things I'd like fixed when you get around to it. -- Mark Wieder

Re: Moving object out of a group

Kind of, but I'm not very good at it. Look at what happened. Now I'm afraid to go back and try to fix it. -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActive Software | http://www.hyperactivesw.com On June 15, 2020 2:48:27 PM Mark Wieder via use-livecode wrote: On 6/15/20

Re: Moving object out of a group

On 6/15/20 12:32 PM, doc hawk via use-livecode wrote: by scripting the past. I thought Jacque was the only who had that superpower... -- Mark Wieder ahsoftw...@gmail.com ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit

Re: Moving object out of a group

Hi Sean, Try collapsing the groups in the PB, then dragging the Graphic Object in between them. I find that if the groups are displayed expanded, then the dragged object will end up in the group above where it is dropped, but with the groups collapsed you should be able to drop the objects

Re: Moving object out of a group

On 6/15/20 9:31 AM, Sean Cole (Pi) via use-livecode wrote: Ideally, the grc should end up outside of both groups but between them in the list. I've tried drag-drop and by changing the layer number but can't get it to place properly. Is there a way to overcome this? The only way I can ever do

Re: Moving object out of a group

rag/drop the grc rect to the containing group or card (i.e. outside the > groups it should not be in) > > - drag / drop other groups to before it > > 2. - select the group it is in > >- "Ungroup" > >- deselect the rect > >- "Gro

Re: Moving object out of a group

If the group is expanded in the Project Browser, then it lands inside the group.  If the group is collapsed/closed then it will move between groups. Thanks, Brian On Jun 15, 2020, 2:49 PM -0400, Alex Tweedly via use-livecode , wrote: > two possible, but not great, answers ... but (someth

Re: Moving object out of a group

two possible, but not great, answers ... but (something like) this has worked for me in the past. 1. - drag/drop the grc rect to the containing group or card (i.e. outside the groups it should not be in)  - drag / drop other groups to before it 2. - select the group it is in    - "Un

Moving object out of a group

Hi all, This has been a problem for some time now but it's just got so much more frustrating for me. I tend to organise my objects into groups as there are often lots of them and it helps keep them manageable. However, I have created a rectangle grc I need positioning between two group layers

Re: Group resizing.

> I had a silly typo >    set the top of something to the bottom of another+10 > and I had >    set the top of something to the bottom of another+1000 > > If lockLocation had been set, that would have been trivially obvious, > and fixed in 30 seconds. However, it wasn't,

Re: Group resizing.

seconds. However, it wasn't, so the group grew out of scale and obscured  most of the window, including where the problematic controls should have been - so I couldn't see they had gone astray.. And by bad luck, when I started adding "put to msg" statements, I happened to

Re: Group resizing.

Trying to understand this thread. I’ve been doing nested group resizing for all my work now for several years - it has been difficult often to debug track errors because of all the nested messages. As a result I’ve had to make a bunch of tools to test each nested element before

Re: Group resizing.

Oh good, I was hoping I wasn’t the only one. — Scott > On May 3, 2020, at 11:28 AM, Alex Tweedly via use-livecode > wrote: > > > I can now get back to my "10-minute cleanup task" that I started 8 hours ago > :-) > > Alex. ___ use-livecode

Re: Group resizing.

No, I don't, and that's probably what I should be doing. I had not expected that changing the LEFT of a control would change both X *and* Y coordinates of the enclosing group - but that is what seems to happen; and that at least makes sense - any change to the control causes an adjustment

Re: Group resizing.

ze handler - but disallows hierarchy (which is the feature I'm trying to take advantage of here). lock screen is of course a good optimization - thanks. Alex. On 03/05/2020 15:26, ha...@exformedia.se wrote: You probably need to lock messages in the beginning of your resizeControl. Otherwise

Re: Group resizing.

Do you have the group size/position locked (lockLocation property)? If not, moving a control could change the rect. Thanks, Brian On May 3, 2020, 10:28 AM -0400, Håkan Liljegren via use-livecode , wrote: > You probably need to lock messages in the beginning of your resizeControl. > Oth

Re: Group resizing.

You probably need to lock messages in the beginning of your resizeControl. Otherwise the group will adapt to your resizing of your controls. I usually begin with both lock messages and lock screen, but the last is more for optimization. Håkan On 3 May 2020, 16:22 +0200, Alex Tweedly via use

Group resizing.

I realized after the discussion last week about resizing that I was missing the benefits of "resizeControl" being sent to each group, so I changed one of my resize handlers to make use of groups (adding a few groups along the way). And it all went wrong :-( Eventually I trac

Re: Parent Group of the Target

@Bill P. ditto that "if there was a compilation of the various keywords and what each refers to". on mouseup put the short name of the owner of the target # where all you want it the "immediate" owner and not the card, stack end mouseUp # that was easy! And for multiple

Re: Parent Group of the Target

and, for me at least, I wouldn’t think to call the group an object is in “the owner”. Best, Bill William Prothero http://es.earthednet.org > On Jan 7, 2020, at 9:46 AM, Sannyasin Brahmanathaswami via use-livecode > wrote: > > aha! I was searching for "parent" Yes, "owner&qu

Re: Parent Group of the Target

aha! I was searching for "parent" Yes, "owner" is it. And for multiple groupings, the owner of the owner of the owner of ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage

Re: Parent Group of the Target

gt; > what is the most efficient was to get the name of the "Parent Group" > of the target? > > Do we really have to parse this? > > widget id 67388 of group id 67392 of card id 8169 of stack > "/Users/brahmanathaswami/Documents

Re: Parent Group of the Target

nywhere on the list what is the most efficient was to get the name of the "Parent Group" of the target? Do we really have to parse this? widget id 67388 of group id 67392 of card id 8169 of stack "/Users/brahmanathaswami/Documents/_Siva-Siva-App/Siva-Si

Re: Parent Group of the Target

I can't find it anywhere on the > list > > what is the most efficient was to get the name of the "Parent Group" of the > target? > > Do we really have to parse this? > > widget id 67388 of group id 67392 of card id 8169 of stack > "/Users/brahmanathasw

Parent Group of the Target

I could have sworn we passed way before, but I can't find it anywhere on the list what is the most efficient was to get the name of the "Parent Group" of the target? Do we really have to parse this? widget id 67388 of group id 67392 of card id 8169 of stack "/Users/brahmanatha

Re: Group misbehavior in 9.5

for this one, either . . . > > When using the group editor and cutting a subgroup, it seems not to lose all > of its information. I then paste back in, and it frequently becomes part of > its prior owner, and sometimes part of another group. > > So if I edit group A, and f

Group misbehavior in 9.5

I can’t come up with a recipe for this one, either . . . When using the group editor and cutting a subgroup, it seems not to lose all of its information. I then paste back in, and it frequently becomes part of its prior owner, and sometimes part of another group. So if I edit group

Re: property that shows a group is being edited?

EditBackground? On 5/29/19 2:32 PM, Dr. Hawkins via use-livecode wrote: This came up a few months ago, and someone mentioned a property that is set while editing a group in the IDE. I can’t find it in the dictionary or with Mr. Google. Can anyone remember the name of the property? — Richard

property that shows a group is being edited?

This came up a few months ago, and someone mentioned a property that is set while editing a group in the IDE. I can’t find it in the dictionary or with Mr. Google. Can anyone remember the name of the property? — Richard E. Hawkins, Esq. The Hawkins Law Firm 3430 E. Flamingo Rd. Suite 232 Las

SoCal LC group: CanelaDB at tonight's meeting

on Meetup.com, as part of the SGV Tech group: https://www.meetup.com/SGVTech/events/zjvctlyzhbdb/ Our meeting room has limited seating, so please RSVP there to reserve a seat. -- Richard Gaskin Fourth World Systems ___ use-livecode mailing list use

Re: Limit on pixles in a group [ was: Re: Max number of columns in a datagrid?]

the whole thing scroll (as a group), then you could run into the pixel limitation. Wouldn't you ?   Or maybe I'm missing something. > And if we were to consider non-European languages, maybe that would > apply horizontally as well ?? What non-European languages have no line wrapping? 

  1   2   3   4   5   6   7   8   9   10   >