RE: Configuration - IDEN PD

Hi Garl, Unfortunately, I have not tested Kannel with IDEN. What is the IDEN packet service? Is it similar to GPRS - if so, this works. Ivone has posted a problem with a IDEN configuration issue also. Her device seems to be using port 9203 to connect with. Try changing the WAP port number of the

Re: Re: Urgent!-[PLEASE HELP ON SMS-conf.](TS.Kong)

Mr  Kwok Peng Tuck: Many Thanks  , For the reply in such short notice. Best Regards,TS.Kong - TS.KongComputer Convenience Inc.Tokyo. JAPAN E-mail: [EMAIL PROTECTED] (Office)    [EMAIL PROTE

RE:RE: WAP KANNEL Configuration

Thanks Mark for you reply! But I have some problems :( I have the service available and I verify that the ports 9201 and 9202 are up. I'm using a Motorola Iden cellphone that are connect by the port: 9203. But, I don't get that the handset access to the home-deck. Where can I set this port 92

WapKannel Configuration

Thanks Mark for you reply! I have the service available and I verify that the ports 9201 and 9202 are up. I'm using a Motorola Iden cellphone that are connect by the port: 9203, But, I don't get the handset access to the home-deck configurating my kannel server. Where can I set this port as 92

WapKannel Configuration

Thanks Mark for you reply! I have the service available and I verify that the ports 9201 and 9202 are up. I'm using a Motorola Iden cellphone that are connect by the port: 9203, But, I don't get the handset access to the home-deck configurating my kannel server. Where can I set this port as 92

[PLEASE HELP : WAP Gateway.conf](TS.Kong)

Dear Kannel User: System status:-Kennel version : Kannel 1.2.0-Running on Linux Purpose:-Using Kannel to test new model phone I have successfully run Kannel as a WAP gateway and able to connect toHTTP server ,on requesting and receiving CONTENT.(on a simulated phone) Below is My WAP Gateway Conf

Feedback on databases to store dlrs.

I need feedback from kannel users, so any response from your experiences would be great. I intend to use SAP db from http://www.sapdb.org to store dlrs(using dlr-url) from kannel. Does anyone have experience with this database and could share their experiences? I'd just like to know how it fare

Re: Urgent!-[PLEASE HELP ON SMS-conf.](TS.Kong)

tuckseng kong wrote: > Dear Kannel User: > > System status: > -Kennel version : Kannel 1.2.0 > -Running on Linux > Purpose: > -Using Kannel to test new model phone > > > > I have successfully run Kannel as a WAP gateway and able to connect to > HTTP server ,on requesting and receiving CONTENT.

Urgent!-[PLEASE HELP ON SMS-conf.](TS.Kong)

Dear Kannel User: System status:-Kennel version : Kannel 1.2.0-Running on Linux Purpose:-Using Kannel to test new model phone I have successfully run Kannel as a WAP gateway and able to connect toHTTP server ,on requesting and receiving CONTENT.(on a simulated phone) BUT, I having troble on sett

Re: RE: Kannel runtime doesn't think MySql is built in but build thinks it is?

An infamous -lz (zlib) problem. Upgrade your zlib... I am not sure which version at minimum you will have to have... But 1.0.9 should work at least... -- Rene... This email message has been automatically scanned for viri using Sophos antivirus. - Original Message - Fro

Re: RE: Kannel runtime doesn't think MySql is built in but build thinks it is?

Boy I'm having fun tonight :-( First, I got past the dlr problem, I was using --enable-mysql-dlr instead of --with-dlr=mysql as the ./configure param. Great, got past that and now even get a new message confirming "dlr=mysql" during the build! However, now it doesn't create any executables beca

Configuration - IDEN PD

hello, I'm trying to run kannel with iDEN Packet Data. Kannel is already running in linux 7.2, but i'm not getting response when i require kannel service from my IDEN device. Does anybody test it? or have any idea why it is not working... Maybe i have to set up more things in my configur

RE: RE: Kannel runtime doesn't think MySql is built in but build thinks it is?

oh, your using windows. in that case - all bets are off. I'm not sure about anything in windows, except that it doesn't work much. try to make clean - maybe make didn't notice that the config has changed and so didn't rebuild the object files and so the make process simply re-linked the object

Re: RE: Kannel runtime doesn't think MySql is built in but build thinks it is?

Hmm, yeah thats what you'd think but I just deleted bearerbox.exe and the build recreated it...it still complained support was missing :-( The resulting bearerbox.exe size is 1,355,775 (Cygwin). Does that sound reasonable? Any more files I can check please? > > From: "Oded Arbel" <[EMAIL PROTEC

RE: Kannel runtime doesn't think MySql is built in but build thinks it is?

Must likely you are running the bearerbox that was built in the first step and not in the second. -- Oded Arbel m-Wise mobile solutions [EMAIL PROTECTED] +972-9-9581711 (116) +972-67-340014 ::.. `When you say "I wrote a program that crashed Windows", people just stare at you blankly and say "

Kannel runtime doesn't think MySql is built in but build thinks it is?

Hi, Downloaded mysql & installed (with ./configure --prefix=/usr/local) Now build Kannel (todays snapshot) with ./configure --enable-mysql-dlr --enable-mysql --with-mysql=/usr/local make make install Saw messages: ... Configuring DB support ... checking whether to compile with MySQL support..

wap kannel configuration

Hi all! I'm not clear about map-url, map-url-max and device-home descriptions for wapbox configuration. So, Please could anybody contribute any sample configuration for wapbox.conf with these points. I would be grateful of any contribution. Regards, Ivonne :) __

Re: Help: Thread 5: at2_thread always terminates

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 áùáú, 12 áàå÷èåáø 2002, 17:03, Vincent Ie Ismail ëúá òì 'Help: Thread 5: at2_thread always terminates': > I cannot start the kannel properly, the at2_thread > required to control the modem always terminates during > bearebox start. Because of this no

[AW] Anyone got URLS for where I can buy a wavecom in the UK please?

Failing that anywhere in Europe Thanks! ___ Freeserve AnyTime, only £13.99 per month with one month's FREE trial! For more information visit http://www.freeserve.com/time/ or call free on 0800 970 8890

Re: Operator Logos

Go here http://world.altavista.com/   where it says "Translate a web page" write: http://www.smshome.net/notizie.phtml?id=17, choose "Italian to english" and then Translate. You'll get a good translation.   That's all, Enzo     - Original Message - From: Satish Reddy To:

Re: calculate the "operator code" in "operator logo" data

On Mon, 14 Oct 2002 11:39:11 +0100 Pate Mark-marpate1 <[EMAIL PROTECTED]> wrote: > Hi Yury, > > There is something similar in SS7 signalling.In this case, we do : > > (MCC digit 2) (MCC digit 1) F (MCC digit 3) (MNC digit 2) (MNC digit 1) > > I think that if you have a 3 digit MNC (which i

RE: calculate the "operator code" in "operator logo" data

Hi Yury, There is something similar in SS7 signalling.In this case, we do : (MCC digit 2) (MCC digit 1) F (MCC digit 3) (MNC digit 2) (MNC digit 1) I think that if you have a 3 digit MNC (which is coming), then the "F" is replaced with that. I hope that this is true for your question too..

calculate the "operator code" in "operator logo" data

Hi all! I need to send Operator logo with kannel (using OTA), but i can't calculate the "operator code" :((( For example: in http://www.mail-archive.com/users@kannel.3glab.org/msg00415.html Nisan Bloch say: "So assuming a MCC = 234 and a MNC=10 you will get %32%F4%01" My MCC is 250 and MNC is 02

RE: Operator Logos

>>You can find here http://www.smshome.net/notizie.phtml?id=17; it's in Nokia format ... i cant understand any thing there ... is'nt there an english version of this web site ? Best Regds Satish Reddy -Original Message-From: Enzo dell'Aquila [mailto:[EMAIL PROTECTED]]Sent: Mo

Re: Operator Logos

> For few months, swiss operators can't send sms > to italian operators (now there is no problem).With heavy surcharges :-( Bye Andrea  

Re: Operator Logos

  - Original Message - From: Andrea Trasatti To: Satish Reddy ; Kannel Users Sent: Monday, October 14, 2002 11:12 AM Subject: RE: Operator Logos Where is received.You may send it from ANY network... It's true. Just remember to check if your (originating)

RE: Operator Logos

Okie fine .. in this case i was setting the code from where Operator Logo was being sent .. shall try it out and let u know . Best Regds Satish Reddy > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Andrea Trasatti > Sent: Monday, October 14, 2002 2:

RE: Operator Logos

Where is received. You may send it from ANY network... On 14 Oct 2002 at 14:33, Satish Reddy wrote: > yeah i've set the proper operator code id .. > which operator code id it shd be ? > The network from where the Logo is sent or the network where the operator > is received ? > > Best Regds >

RE: Operator Logos

yeah i've set the proper operator code id .. which operator code id it shd be ? The network from where the Logo is sent or the network where the operator is received ? Best Regds Satish Reddy > -Original Message- > From: Andrea Trasatti [mailto:[EMAIL PROTECTED]] > Sent: Monday, October

Re: Kannel 1.2 problems installing on Redhat 8

Am Montag, 14. Oktober 2002 08:48 schrieb Pate Mark-marpate1: Hi, > Hi Alan & Gustavo, > > This is not a Kannel problem, it is related to the OS that you are using. > The "start-stop-daemon" is included with Debian, I believe. It does not > come with any other distribution. > > What you need to d