Hello there,
is there anyway to force an MT message sent from the http interface (SMSBOX) to
go through a certain SMSC ID?
Regards,
Remon
Hi Remon,
If you're using the HTTP interface to send SMS messages then you can use
the smsc parameter. See the "Running SMS gateway" section of the user
guide for details and other parameters that you can use.
Nathan
Remon Magdy wrote:
Hello there,
is there anyway to force an MT message
Hello.
I'm by no means a Kannel expert, but I found that I also *had* to add:
denied-smsc-id = viamodem
to my gateway smsc configuration and:
denied-smsc-id = viagateway
to my modem smsc configuration
(where "viamodem" and "viagateway" are the two active SMSCs in my conf
file) before it st
through smsc1 while keeping the same above
configurations for bearerbox.
Regards,
Remon
-Original Message-
From: Nathan Ferris [mailto:[EMAIL PROTECTED]
Sent: Mon 3/31/2008 9:58 PM
To: users@kannel.org
Subject: Re: Force SMSC from HTTP Sendsms
Hi Remon,
If you're using the H
Yes, there is a request parameter documented in the user guide.
There are also config parameters regarding routing (also documented).
_
From: Remon Magdy [mailto:[EMAIL PROTECTED]
Sent: 31 March 2008 22:43
To: users@kannel.org
Subject: Force SMSC from HTTP Sendsms
Hello there
above configurations for bearerbox.
Regards,
Remon
-Original Message-
From: Nathan Ferris [mailto:[EMAIL PROTECTED]
Sent: Mon 3/31/2008 9:58 PM
To: users@kannel.org
Subject: Re: Force SMSC from HTTP Sendsms
Hi Remon,
If you're using the HTTP interface to send SMS messages then
