https://www.zdnet.com/article/raspberry-pi-alternative-new-odroid-c4-undercuts-4gb-raspberry-pi-4-by-5/
Thanks,
Richard
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora
On Fri, 24 Apr 2020 at 13:21, bruce wrote:
> Hi/Morning.
>
> This is a continuation of my looking to nail down what should be
> Monitored/Scanned to secure a Fed server/VM.
>
> I've looked over a number of Monitor apps (Solarwinds/Nagios/Zabbix/etc).
> Can't really find a good list of the things
On 2020-04-25 00:05, home user wrote:
> It looks like you are having module problems. I don't know if this
> will help, but while testing upgrade from F31 to F32 to look for
> issues, we were advised to run
> dnf module reset '*'
> to make modules behave before running the upgrade. You could try
On 4/24/20 1:18 AM, Matthew Saltzman wrote:
Thanks for the tip. Should have mentioned that the pen works fine in
Windows. I did try switching modes, to no avail. AIUI, the mode
compatibility issue is downstream from the fact that I can't even get
the Bluetooth connection. The Ink and Ink Plus
Hi/Morning.
This is a continuation of my looking to nail down what should be
Monitored/Scanned to secure a Fed server/VM.
I've looked over a number of Monitor apps (Solarwinds/Nagios/Zabbix/etc).
Can't really find a good list of the things that should be monitored, so
I've compiled the following
> Any suggestions about any of these conflicts?
>
> sudo dnf system-upgrade download --refresh --releasever=32
> sudo dnf system-upgrade download --refresh --releasever=32
> Before you continue ensure that your system is fully upgraded by running "dnf
> --refresh upgrade". Do you want to
This is a good discussion for me since I too have been thinking on
getting a somewhat modern AMD motherboard. Things I would like is pcie
(ideally v4 but can do v3) slots (4+) and memory. The latter
requirement made me think on going to ebay and getting a server board
as those memory cards are
For what it is worth (probably not much), I just built a new
system with a GIGABYTE Z390 AORUS Ultra, selected primarily because
it had 3 M.2 slots on the motherboard, so I could replace all my
rotating disks with much speedier M.2 sticks.
___
users
I just put together a new machine for myself.
ASRock B450M Pro 4 (you have to make sure that a firmware update was done
on the board for this CPU, early ones were not ready for the newer CPU)
Ryzen 7 3700X
(I used my existing nVidia 750Ti card, which requires their
proprietary drivers.)
On Fri, Apr 24, 2020 at 9:17 AM Fulko Hew wrote:
>
> If I pick Intel based, I'm pretty much assured everything will work,
> but it seems that going AMD will get me better bang-for-the-buck,
> but ... will all the parts work with Linux?
>
Yup, all of my desktops are AMD and have been for
I'm looking for the best bang for my buck, and of course
Linux (Fedora) compatibility. My criteria are simple:
- inexpensive
- best bang for the buck
- must have PCIe 3.0 x 16 slot
If I pick Intel based, I'm pretty much assured everything will work,
but it seems that going AMD will get me better
On 2020-04-24 20:09, Neal Becker wrote:
> Any suggestions about any of these conflicts?
You probably can get by with adding --skip-broken to the upgrade command.
Alternatively, disable the repo from where they came since you see "does not
belong to a distupgrade
repository". Probably those
Any suggestions about any of these conflicts?
sudo dnf system-upgrade download --refresh --releasever=32
sudo dnf system-upgrade download --refresh --releasever=32
Before you continue ensure that your system is fully upgraded by running "dnf
--refresh upgrade". Do you want to continue [y/N]: y
On Fri, 2020-04-24 at 08:05 +0800, Ed Greshko wrote:
> On 2020-04-24 07:31, Matthew Saltzman wrote:
> > Has anyone used a Bamboo Ink or Ink Plus stylus with Fedora?
> >
> > Fedora 31, up to date. Lenovo Yoga X1 second generation. Trying to
> > use
> > a Bamboo Ink Plus stylus. I can pair it via
14 matches
Mail list logo
