Norton makes it easy for you to set up your Norton protection, check your
security status, and extend your protection to other PCs, Macs, smartphones,
and tablets.
We Provide Support Services for-
Norton Internet Security
Norton end point protection
Norton firewall issue
Setup and Install Norton
People today share everything on social media, like their daily activities, the
food they eat and their locations.
However, they do not realise that they are inadvertently giving people
information about themselves or their situations. For example, if someone posts
a picture of himself leaving
Hi Wesley,
Currently, there is no direct way to change disks allocation policy
(thin-provision <-> preallocation).
In your case, it sounds like your ISCSI storage is running out of space,
changing disk from thin-provisioned to preallocation will consume *more* space
on the storage,
This is an awesome post. Really informative and creative content. These concept
is a good way to enhance the knowledge. I like it and help me to development
very well. Thank you for this brief explanation and very nice information.
Well, got a good knowledge.
http://wwwofficecomsetupkey.com
Thank you.
I'm using version 4.30.11
On Mon, Apr 15, 2019 at 12:12 AM Simone Tiraboschi
wrote:
>
>
> On Fri, Apr 12, 2019 at 7:57 PM Wood Peter wrote:
>
>> Hi all,
>>
>> A few weeks ago I did a clean install of the latest oVirt-4.3.2 and
>> imported some VMs from oVirt-3. Three nodes running
Hello Guys
Have 8 host with Ovirt 4.1 and need change the IP to all node.
There is a procedure to make the change of IP, I have searched for
information but I can not find a process to perform.
Someone could help me to know how I can change the IP in the nodes, I know
that I must put the nodes
Hello all,
after a powerloss the hosted engine wont start up anymore.
I ve the current ovirt installed.
Storage is glusterfs und it is up and running
It is trying to start up hosted engine but it does not work, but I cant see
where the problem is.
[root@kvm320 ~]# hosted-engine
Hi Gianluca,
First of, sorry for the late reply, been very busy this past week.
Regarding the lack of security group support on oVirt, I agree it's unfortunate.
Please take a look at this repo [0]; you'll find playbooks to update
the port's / networks port security, security groups, and a
I do a fresh install oVirt 4.3 on CentOS 7.6.1810, but in the end of playbook
it falls down:
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system
may not be provisioned according to the playbook results: please check the logs
for the issue, fix accordingly or
Thank you again Alex,
It makes a lot of sense now, with this detailed explanation.
On Mon, Apr 15, 2019, 20:25 Alex McWhirter wrote:
> On 2019-04-15 13:08, Leo David wrote:
>
> Thank you Alex !
> I will try these performance settings.
> If someone from the dev guys could validate and recommend
I am currently running a ZFS server (Running RaidZ2) and I have been
experimenting with NFS and shares to host my guests. I am currently
running oVirt 4.2.8 and using a RaidZ2 NFS mount for the guests.
ZFS definitely is definitely pretty awful (At least in my experience so
far) for hosting VMs.
On 2019-04-15 13:08, Leo David wrote:
> Thank you Alex !
> I will try these performance settings.
> If someone from the dev guys could validate and recommend those as a good
> standard configuration, it would be just great.
> If they are ok, wouldn't be a nice to have them applied from
Thank you Alex !
I will try these performance settings.
If someone from the dev guys could validate and recommend those as a good
standard configuration, it would be just great.
If they are ok, wouldn't be a nice to have them applied from within UI
with the "Optimize for VirtStore" button ?
On 2019-04-15 12:58, Alex McWhirter wrote:
> On 2019-04-15 12:43, Darrell Budic wrote: Interesting. Who's 10g cards and
> which offload settings did you disable? Did you do that on the servers or the
> vm host clients or both?
>
> On Apr 15, 2019, at 11:37 AM, Alex McWhirter wrote:
>
> I
On 2019-04-15 12:43, Darrell Budic wrote:
> Interesting. Who's 10g cards and which offload settings did you disable? Did
> you do that on the servers or the vm host clients or both?
>
> On Apr 15, 2019, at 11:37 AM, Alex McWhirter wrote:
>
> I went in and disabled TCP offload on all the
Interesting. Who’s 10g cards and which offload settings did you disable? Did
you do that on the servers or the vm host clients or both?
> On Apr 15, 2019, at 11:37 AM, Alex McWhirter wrote:
>> I went in and disabled TCP offload on all the nics, huge performance boost.
>> went from 110MB/s to
On 2019-04-14 23:22, Leo David wrote:
> Hi,
> Thank you Alex, I was looking for some optimisation settings as well, since I
> am pretty much in the same boat, using ssd based replicate-distributed
> volumes across 12 hosts.
> Could anyone else (maybe even from from ovirt or rhev team)
Hi,
I'm trying to use the Ceph iSCSI gateway with oVirt.
According to my tests with oVirt 4.3.2
* you cannot separate iSCSI discovery auth and target auth
* you cannot use an iSCSI gateway that has no discovery auth, but uses
CHAP for targets
This means I'm forced to use the same credentials
On Mon, 15 Apr 2019 15:23:19 +0200
Nardus Geldenhuys wrote:
> Hi
>
> Please find attached. Yes they can talk to each other on those ports.
>
> Ncat: UDP packet sent successfully
>
Unfortunately I do not have an idea why your setup does not work.
Can you please try to
vdsm-tool ovn-config
Hi
Please find attached. Yes they can talk to each other on those ports.
Ncat: UDP packet sent successfully
Regards
Nardus
On Mon, 15 Apr 2019 at 15:11, Dominik Holler wrote:
> Thanks, looks like message about too many open files is valid.
> Next question is why the geneve tunnel is
Thanks, looks like message about too many open files is valid.
Next question is why the geneve tunnel is failing.
Would you share the output of
ovs-vsctl list Interface
?
Can the affected host can reach the other OVN hosts via their
remote_ip on udp port 6081?
A check by netcat might give a hint:
The problem was with the domain. For some reason, the second node couldn't
mount the data domain, maybe for some corruption. After creating another domain
and migrating all machines, the second node could successfully activate.
___
Users mailing list
Please find attached
On Mon, 15 Apr 2019 at 10:10, Dominik Holler wrote:
> Would you please share the last lines of all files
> in /var/log/openvswitch, the relevant lines of /var/log/message, and
> the ouput of
> ss -lap
> lsof
> ?
> Thanks
>
>
> On Sun, 14 Apr 2019 14:17:53 -
> "Nardus
As much as efforts are being made to make Orchard Road a smoke-free zone, there
are still other areas for the National Environment Agency to consider (Warnings
for lighting up in no-smoking zone to end, March 30).
I was at Orchard Towers with a friend a few days ago, and I was shocked when I
About two years ago I was asked by the Malaysian Ministry of Transport to apply
for a vehicle entry permit (VEP) costing RM20 (S$6.60). All this was done
online.
I have been informed that the VEP is ready and can be collected at one of four
places - Lima Kedai Toll Plaza, Pandan R, Gelang
Would you please share the last lines of all files
in /var/log/openvswitch, the relevant lines of /var/log/message, and
the ouput of
ss -lap
lsof
?
Thanks
On Sun, 14 Apr 2019 14:17:53 -
"Nardus Geldenhuys" wrote:
> Also get this after install new ovirt node. It stops after about 20
Dr William Wan was willing to be vulnerable when he openly wrote that personal
testimony about how he and his daughter recovered from her drug addiction (Hope
and life beyond drug addiction, April 1).
In a shame-based culture, most people would rather hide than come out to admit
failure in
I guess from the libvirt-latest repository
On 12.04.19 16:09, Nir Soffer wrote:
On Fri, Apr 12, 2019, 12:07 Ladislav Humenik
mailto:ladislav.hume...@1und1.de>> wrote:
Hello, we have recently updated few ovirts from 4.2.5 to 4.2.8
version
(actually 9 ovirt engine nodes), where
On Fri, Apr 12, 2019 at 10:18 PM Alex K wrote:
>
>
> On Fri, Apr 12, 2019, 12:53 Andreas Elvers <
> andreas.elvers+ovirtfo...@solutions.work> wrote:
>
>> I am wondering whether global maintenance inhibits fencing of
>> non-responsive hosts. Is this so?
>>
>> Background: I plan on migrating the
On Fri, Apr 12, 2019 at 7:57 PM Wood Peter wrote:
> Hi all,
>
> A few weeks ago I did a clean install of the latest oVirt-4.3.2 and
> imported some VMs from oVirt-3. Three nodes running oVirt Node and oVirt
> Engine installed on a separate system.
>
> I noticed that some times some VMs will boot
30 matches
Mail list logo