goodnight
I installed 3.2 and oVirt vdsm on the same machine (fedora 18) with the
command.
yum install oVirt-engine-setup-plugin-allinone and then
engine-setup - config-allinone = yes
then, the configuration was successful, however now I am having problems
with interfaces.
I have two interfaces,
Just remove IP address/netmask/gateway from the em1's config and add
BRIDGE='ovirtmgmt' there.
Be ensure that BOOTPROTO='none' and NM_CONTROLLED='no' are
configured
--
Pavel
On Tue, 26 Feb 2013, victor nunes wrote:
|
| goodnight
|
| I installed 3.2 and oVirt vdsm on the same machine (fedora
On Tue, Feb 26, 2013 at 07:32:51PM -0500, victor nunes wrote:
> goodnight
>
> I installed 3.2 and oVirt vdsm on the same machine (fedora 18) with the
> command.
> yum install oVirt-engine-setup-plugin-allinone and then
> engine-setup - config-allinone = yes
>
> then, the configuration was success
OK.
Thank very much.
Its work.
2013/2/27 Dan Kenigsberg
> On Tue, Feb 26, 2013 at 07:32:51PM -0500, victor nunes wrote:
> > goodnight
> >
> > I installed 3.2 and oVirt vdsm on the same machine (fedora 18) with the
> > command.
> > yum install oVirt-engine-setup-plugin-allinone and then
> > eng
On Sat, Mar 02, 2013 at 01:47:37PM -0300, victor nunes wrote:
> OK.
>
> Thank very much.
> Its work.
Would you educate me (and the list archives)? I had a lot of guesses -
what exactly did the work?
>
>
> 2013/2/27 Dan Kenigsberg
>
> > On Tue, Feb 26, 2013 at 07:32:51PM -0500, victor nunes w
Hi,
I have a question about ovirtmgmt network.
When deploying Hosted-Engine it creates ovirtmgmt bridge on top of main
nic of the host. This means the HE will be connected to the same network
as the main Host connection. Is it possible to separate those subnet,
let say I would have something
- Original Message -
> From: "Pascal Jakobi"
> To: users@ovirt.org
> Sent: Saturday, November 30, 2013 1:24:23 AM
> Subject: [Users] ovirtmgmt not installed
>
> Hi there
>
> I installed a console on F19, then a F19 host (time 11:09 today).
>
- Original Message -
> From: "Pascal Jakobi"
> To: users@ovirt.org
> Sent: Saturday, November 30, 2013 1:24:23 AM
> Subject: [Users] ovirtmgmt not installed
>
> Hi there
>
> I installed a console on F19, then a F19 host (time 11:09 today).
>
- Original Message -
> From: "Alon Bar-Lev"
> To: "Pascal Jakobi"
> Cc: users@ovirt.org
> Sent: Saturday, November 30, 2013 2:40:33 AM
> Subject: Re: [Users] ovirtmgmt not installed
>
>
>
> - Original Message -
> > Fr
- Original Message -
> Hi there
Hi Pascal,
> I installed a console on F19, then a F19 host (time 11:09 today).
> Everything works fine, apart from the installation of the mgmt network at the
> end.
> Can someone tell me what's going wrong ?
Can you please send the output of vdsCaps fro
Mike
Here you go. However, please note that I must investigate the connection
issue that Alon saw. will do it tomorrow.
Many thanks to you folks.
P
[root@lab2 ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:eea139a8'}]}
ISCSI
Did you install VDSM from nightly or stable?
Assaf Muller, Cloud Networking Engineer
Red Hat
- Original Message -
From: "Pascal Jakobi"
To: "Mike Kolesnik"
Cc: users@ovirt.org
Sent: Sunday, December 1, 2013 10:58:40 AM
Subject: Re: [Users] ovirtmgmt not installed
Hi Pascal,
- Original Message -
> From: "Pascal Jakobi"
> To: "Mike Kolesnik"
> Cc: users@ovirt.org, masa...@redhat.com
> Sent: Sunday, December 1, 2013 10:58:40 AM
> Subject: Re: ovirtmgmt not installed
>
> Mike
>
> Here you go. However, please note that I must investigate the connect
As a matter of fact, when I installed F19, it created an eno1 device,
aliased to em1. Don't know why, yet.
Even adding a "GATEWAY" clause in /etc/sysconfig/network does not seem to
change the problem
Will check how to change the device name.
2013/12/1 Moti Asayag
> Hi Pascal,
>
> - Ori
Still the same, even with networking working like a charm...
Any idea ?
[root@lab2 vdsm]# vdsClient -s 0 getVdsCaps
HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:a0bc8a5f9a5d'}]}
ISCSIInitiatorName = 'iqn.1994-05.com.redhat:a0bc8a5f9a5d'
bondings = {'bo
cal Jakobi" , "Moti Asayag"
>
> Cc: users@ovirt.org
> Sent: Tuesday, December 3, 2013 1:11:36 PM
> Subject: Re: [Users] ovirtmgmt not installed
>
> Still the same, even with networking working like a charm...
> Any idea ?
>
> [root@lab2 vdsm]# vdsClient -
@ovirt.org
Sent: Wednesday, December 4, 2013 8:22:05 AM
Subject: Re: [Users] ovirtmgmt not installed
At the end, I could not make an F19 Fedora host work against a 3.3 engine. I
suggest someone from the eng team has a look at it. some stuff just does not
work there.
Therefore, I downgraded the fedora
- Original Message -
> From: "Assaf Muller"
> To: "Pascal Jakobi"
> Cc: users@ovirt.org
> Sent: Wednesday, December 4, 2013 9:09:18 AM
> Subject: Re: [Users] ovirtmgmt not installed
>
> I personally have a F19 host working against 3.3 engine.
m: "Assaf Muller"
> > To: "Pascal Jakobi"
> > Cc: users@ovirt.org
> > Sent: Wednesday, December 4, 2013 9:09:18 AM
> > Subject: Re: [Users] ovirtmgmt not installed
> >
> > I personally have a F19 host working against 3.3 engine. Could y
ers@ovirt.org
> Sent: Wednesday, December 4, 2013 9:37:22 PM
> Subject: Re: [Users] ovirtmgmt not installed
> I have done this and it solves the issue.
> However, the next issue I found was that the host was not able to join a 3.3
> cluster (i.e. the "default" cluster)
- Original Message -
> From: "Pascal Jakobi"
> To: "Antoni Segura Puimedon"
> Cc: "Pascal Jakobi" , users@ovirt.org
> Sent: Wednesday, December 4, 2013 10:37:22 PM
> Subject: Re: [Users] ovirtmgmt not installed
>
> I have done this a
[root@lab2 ~]# vdsClient -s localhost getVdsCaps | grep cluster
*clusterLevels = ['3.0', '3.1', '3.2']*
[root@lab2 ~]# cd /etc/yum.repos.d/
[root@lab2 yum.repos.d]# ls
fedora.repo fedora-updates.repo fedora-updates-testing.repo
fedora-virt-preview.repo ovirt.repo
[root@lab2 yum.repos.d]# cat
Hi Pascal,
VDSM for 3.3 is only working on F19 so since you downgraded the host you won't
get it.
Try to upgrade the host back to F19 and use the workaround suggested by Toni
(create the ifcfg file for your NIC).
Or am I missing something in your setup?
P.S. I also have a working F19 host
- Original Message -
> ok. I reinstalled everything. My F19 host has only an em1 ethernet I/F. I am
> on 3.3.
> However, setting up the host fails in its last stage (setting up mgmt
> network).
Can you please attach updated output of 'vdsClient -s 0 getVdsCaps' on this
host?
> 2013/12/
[root@lab2 ~]# vdsClient -s 0 getVdsCaps
HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
'iqn.1994-05.com.redhat:4334926278c1'}]}
ISCSIInitiatorName = 'iqn.1994-05.com.redhat:4334926278c1'
bondings = {'bond0': {'addr': '',
'cfg': {},
Fixed. It was the trailing 0's in ifcfg-em1 (IPADDR0, etc...) which had to
be removed.
2013/12/9 Pascal Jakobi
> [root@lab2 ~]# vdsClient -s 0 getVdsCaps
> HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName':
> 'iqn.1994-05.com.redhat:4334926278c1'}]}
> ISCSIInitiatorName = 'iqn.1994-0
Hi. I have configured an ovirt-engine to manage an ovirt node succesfully.
I have created VM and all runs well but im trying to do some escenario
testing and i have found an issue.
If somehow the ovirt node is rebooted(Power failure, crash, manual reboot,
etc) when its comes up it does not start
Hello,
How can the IP of the hosts be changed? It is greyed out and I need to change
those. It’s the only thing I’m not able to change..
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hello ovirt experts,
I'm totally new to ovirt and trying to learn as fast as I can.So, please
bear with me and my possibly stupid questions.
Sorry if my questions have been answered already, but please point me to
the place where I can find the answers.
I've setup ovirt 4.1.6 and created a first
Any hint or answer to my question?
I've searched around but couldn't find any answer...
On 10/31/2017 10:36 AM, Arsène Gschwind wrote:
Hi,
I have a question about ovirtmgmt network.
When deploying Hosted-Engine it creates ovirtmgmt bridge on top of
main nic of the host. This means the HE w
I think you would need an IP address on IF2, otherwise the HE cannot
communicate with the host.
If you have an entry in /etc/hosts that resolves the FQDN of the host
to the IP on IF2 then I think the setup script should create the
ovirtmgmt bridge there.
On 8 November 2017 at 12:33, Arsène Gschwi
On Wed, Nov 8, 2017 at 2:33 PM, Arsène Gschwind
wrote:
> Any hint or answer to my question?
>
> I've searched around but couldn't find any answer...
>
>
> On 10/31/2017 10:36 AM, Arsène Gschwind wrote:
> >
> > Hi,
> >
> > I have a question about ovirtmgmt network.
> >
> > When deploying Hosted-Eng
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
> Hi. I have configured an ovirt-engine to manage an ovirt node
> succesfully. I have created VM and all runs well but im trying to do
> some escenario testing and i have found an issue.
>
>
> If somehow the ovirt node is reboo
On 01/23/2014 06:12 PM, Fabian Deutsch wrote:
Am Donnerstag, den 23.01.2014, 12:34 -0300 schrieb Francisco Pérez:
Hi. I have configured an ovirt-engine to manage an ovirt node
succesfully. I have created VM and all runs well but im trying to do
some escenario testing and i have found an issue.
- Original Message -
> From: "Fabian Deutsch"
> To: "Francisco Pérez" , "VDSM Project Development"
>
> Cc: users@ovirt.org
> Sent: Thursday, January 23, 2014 5:12:17 PM
> Subject: Re: [Users] ovirtmgmt vanishes after reboot
>
&
Hi,
In the way Ovirt is currently designed, is there a way to separate the
following elements in different VLANs :
1) Communication betweem nodes (hypervisors) and engine (manager)
2) Access to webadmin interface
3) access to user web interface
It seems that the following elements all rel
On Wed, Dec 21, 2016 at 12:41 AM, Bill Bill wrote:
> Hello,
>
>
>
> How can the IP of the hosts be changed? It is greyed out and I need to
> change those. It’s the only thing I’m not able to change..
I am afraid that you cannot change the address of the management
network while the host is attach
AFAIK if you use a DNS name of the host when you add it to an engine, then
its IP could be changed as long as that name continue be resolved to the
host new address.
On Wed, Dec 21, 2016 at 2:41 PM, Dan Kenigsberg wrote:
> On Wed, Dec 21, 2016 at 12:41 AM, Bill Bill wrote:
> > Hello,
> >
> >
>
On 21 December 2016 at 15:20, Yevgeny Zaspitsky wrote:
> AFAIK if you use a DNS name of the host when you add it to an engine, then
> its IP could be changed as long as that name continue be resolved to the
> host new address.
Yes, but then that DNS becomes a very bad SPOF for your system, so not
;mailto:lgold...@redhat.com>; Bill Bill<mailto:jax2...@outlook.com>;
users@ovirt.org<mailto:users@ovirt.org>
Subject: Re: [ovirt-users] ovirtmgmt network change
On 21 December 2016 at 15:20, Yevgeny Zaspitsky wrote:
> AFAIK if you use a DNS name of the host when you add it to an en
Hello,
On the dmz Network you don't need any address configured on the host.
You set ip address only on the vm. If the vm gets compromised, its access
is limited only to DMZ Network.
There is no way for the attacker to gain access to ovirtmgmt if vm is not
configured to use it.
Luca
Il 26 ott
Sorry,
But you didn't understood well what i've said.
If your host has no ip addresses on that network, you're not encountering
any risk because you've no access to that network at layer 3.
Removing ovirtmgmt is not possibile, that network is mandatory.
Luca
Il 27 ott 2017 1:36 PM, "Istvan Bu
Hello,
thank you for your patience for trying to let me see the light.
Indeed I don't understand what you are explaining. Maybe if I give you more
concrete details it will help.
My internal network is 192.168.196.0
My DMZ network is 192.168.188.0
ovirt-engine is running on a centos server with
On Mon, Oct 30, 2017 at 8:45 AM, Istvan Buki wrote:
> Hello,
>
> thank you for your patience for trying to let me see the light.
>
> Indeed I don't understand what you are explaining. Maybe if I give you more
> concrete details it will help.
>
> My internal network is 192.168.196.0
> My DMZ networ
Hi Istvan,
I agree with Luca. You can remove nic1.
'ovirtmgmt' network is not mandatory on the vm, you can run the vm with no
vnics (vitrual nics) at all.
The 'ovirtmgmt' network is used for communication between the engine and
the host.
Whether the vm using the 'ovirtmgmt' network or not won't af
Le 30 oct. 2017 10:26 AM, "Luca 'remix_tj' Lorenzetto" <
lorenzetto.l...@gmail.com> a écrit :
On Mon, Oct 30, 2017 at 8:45 AM, Istvan Buki wrote:
> Hello,
>
> thank you for your patience for trying to let me see the light.
>
> Indeed I don't understand what you are explaining. Maybe if I give you
On Mon, Oct 30, 2017 at 10:50 AM, Alona Kaplan wrote:
> Hi Istvan,
>
> I agree with Luca. You can remove nic1.
> 'ovirtmgmt' network is not mandatory on the vm, you can run the vm with no
> vnics (vitrual nics) at all.
> The 'ovirtmgmt' network is used for communication between the engine and
> t
Glad to hear it!
You're welcome!
Il 30 ott 2017 9:13 PM, "Istvan Buki" ha scritto:
> On Mon, Oct 30, 2017 at 10:50 AM, Alona Kaplan
> wrote:
>
>> Hi Istvan,
>>
>> I agree with Luca. You can remove nic1.
>> 'ovirtmgmt' network is not mandatory on the vm, you can run the vm with
>> no vnics (vit
aul S.
From: users-boun...@ovirt.org on behalf of Alona
Kaplan
Sent: 30 October 2017 09:50
To: Luca 'remix_tj' Lorenzetto
Cc: users
Subject: Re: [ovirt-users] ovirtmgmt network security
Hi Istvan,
I agree with Luca. You can remove nic1.
'ovirt
Hi all,
I'm adding my first CentOS 7 host to my cluster today, but running into an
issue. When setting up network for the new host I don't have the ability to
set ovirtmgmt to the team I created, see screenshot:
http://imgur.com/k8GWwcK
The team however, works perfectly fine:
[root@hv15]# teamdc
Hi,
I upgraded to the latest version (users@ovirt.org) a few weeks ago and ever
since then I cannot open a console unless I am on the local network (
10.3.1.0/24). I think it is related to the Ovirtmgmt interface being
"out-of-sync".
If I try to fix it in the gui, I get an error:
"Error while e
On 24 August 2017 at 15:39, Alexis HAUSER
wrote:
>
> In the way Ovirt is currently designed, is there a way to separate the
> following elements in different VLANs :
>
> 1) Communication betweem nodes (hypervisors) and engine (manager)
> 2) Access to webadmin interface
> 3) access to user web inte
Using self-hosted engine.
I thought about using several interfaces on the engine VM.
The reason why I want to do that : I would like the users accessing the web
interface not to be on the same network that ovirt is using to communicate
betweem hosts and engine.
But it would mean that 2 differ
Barak Korren
bkor...@redhat.com
RHCE, RHCi, RHV-DevOps Team
https://ifireball.wordpress.com/
בתאריך 25 באוג׳ 2017 01:05 PM, "Alexis HAUSER" <
alexis.hau...@imt-atlantique.fr> כתב:
Using self-hosted engine.
I thought about using several interfaces on the engine VM.
The reason why I want to do th
Hello All,
So due to some issues with provisioning new networks in our lab, I have to use
a different VLAN in for my ovirt cluster.
Cluster -> 3 Hosts (Hyperconverged)
What I want to do is essentially change the Ovirtmgmt interface to another vlan
but also change the IP Schemes, I wont be needi
On Wed, Sep 30, 2015 at 10:57:55AM +0200, Johan Kooijman wrote:
> Hi all,
>
> I'm adding my first CentOS 7 host to my cluster today, but running into an
> issue. When setting up network for the new host I don't have the ability to
> set ovirtmgmt to the team I created, see screenshot:
> http://img
That works, thx.
On Thu, Oct 1, 2015 at 8:10 AM, Dan Kenigsberg wrote:
> On Wed, Sep 30, 2015 at 10:57:55AM +0200, Johan Kooijman wrote:
> > Hi all,
> >
> > I'm adding my first CentOS 7 host to my cluster today, but running into
> an
> > issue. When setting up network for the new host I don't ha
No one has suggestions on how I can sync the ovirtmgmt network? Is more
information needed?
On May 12, 2017 10:43 AM, "Alex R" wrote:
> Hi,
>
> I upgraded to the latest version (users@ovirt.org) a few weeks ago and
> ever since then I cannot open a console unless I am on the local network (
>
Hello Alex,
- Have you tried to sync it using the 'Sync All Networks' button in the
UI?
It's located under 'Hosts' main tab > select the host > 'Network
Interfaces' sub tab > 'Sync All Networks' button.
- Can you please go to the 'Setup Host Networks' dialog(located under the
same path^^) and hoo
Hi Michael, thanks for the suggestion. When I use the GUI I get the error
"Error while executing action HostSetupNetworks: Network is currently being
used"
The network is in use by the engine, that is why I asked if there is a was
to sync via the CLI.
This problem happened after I did the lates
Alex,
Please tell what is the tooltip saying. What is the reason for networks
being out-of-sync?
It is possible that the out-of-sync is the reason for the network issue.
It's a real problem that your ifcfg-ovirtmgmt file was missing after
upgrade, could it be that it wasn't persisted and saved on
Michael,
The tooltip says:
"host nework's configurations differ from DC"
> It is possible that the out-of-sync is the reason for the network issue.
> It's a real problem that your ifcfg-ovirtmgmt file was missing after
> upgrade, could it be that it wasn't persisted and saved on the host before
>
Ok,
What is the exact property reported in the tooltip which is out of sync? it
should be there.
It is possible to add this property to the ifcfg-ovirtmgmt file and then
'refresh caps' it may work.
As you created the ifcfg manually after the upgrade, maybe you missed a
property, which engine expec
Hopefully this screen capture is what you are asking for?
[image: Inline image 1]
Here is:
# cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt
# Generated by VDSM version 4.17.23.2-0.el7.centos
DEVICE=ovirtmgmt
TYPE=Bridge
DELAY=0
STP=off
ONBOOT=yes
IPADDR=10.3.1.7
NETMASK=255.255.255.0
GATEWAY
Yes, thanks)
Engine complains about the bootproto , he is expecting dhcp, but you
configured it manually with static.
Was it dhcp before the upgrade?
There is an option to change it back to dhcp, restart network service and
this should be fixed. But i don't think that this is what you looking for
I need a quick piece of advice, please.
I'm at setting up the oVirt Engine VM (ie doing a "hosted-engine --deploy")
stage.
The Host has 3 NICs.
NIC_1 and NIC_2 are bonded (bond1) and run 2 VLANs (on bond1.1 and bond1.2).
VLAN_1 is to be used as the "everyday connection VLAN for the VMs" (inclu
Hi folks,
I have a 3.5 hosted-engine setup, which was recently upgraded from 3.4.
It has five nodes, two of them set up for hosted-engine HA.
Initial problem:
One of the hosted-engine HVs had a score of 1800, owing to the
management bridge (ovirtmgmt) being absent.
I put ovirtmgmt bridge ba
Hi All,
I recently got an issue and due to lack of debug time , I'm still not sure if
it was a loop on the network.Can someone clarify why the ovirtmgmt bridge has
STP disabled ? Any reason behind that ?
Also, what is the proper way to enable STP on those bridges ?
For now , I have set highest pr
Il 29/04/2015 09:55, Garry Tiedemann ha scritto:
> Hi folks,
>
> I have a 3.5 hosted-engine setup, which was recently upgraded from 3.4. It
> has five nodes, two of them set up for hosted-engine HA.
>
> Initial problem:
>
> One of the hosted-engine HVs had a score of 1800, owing to the manageme
Hi,
We're switching from Centos 7 hosts to oVirt node ng (tried 4.2.7,
4.3rc1 and 4.3rc2) and after adding them to oVirt (currently on 4.3rc2)
the ovirtmgmt interface is always out of sync.
Tried synching the network and refresh capabilities. I also tried
removing ovirtmgmt from the interface and
- Original Message -
> From: "Gianluca Cecchi"
> To: "users"
> Sent: Saturday, December 29, 2012 2:40:37 AM
> Subject: [Users] ovirtmgmt vs eth0 config in all-in-one config
>
>
>
>
> Hello,
>
> what should be the difference
On Sat, Dec 29, 2012 at 9:01 AM, Alon Bar-Lev wrote:
>
>
> eth0 should not have ip address in this configuration.
> Can you please send deploy logs from /var/log/ovirt-engine/host-deploy?
>
> Alon
>
This is the timestamp of the files:
[root@f18aio network-scripts]# ll ifcfg*
-rw-rw-r--. 1 root
On Sat, Dec 29, 2012 at 11:18 AM, Gianluca Cecchi wrote:
>
> On Sat, Dec 29, 2012 at 9:01 AM, Alon Bar-Lev wrote:
>
>>
>>
>> eth0 should not have ip address in this configuration.
>> Can you please send deploy logs from /var/log/ovirt-engine/host-deploy?
>>
>> Alon
>>
>
> This is the timestamp of
Sorry... sent for error before finishing..
BTW: after removing ip information from ifcfg-eth0 I still have to manually
run
ip route add default via 192.168.122.1
Now ifcfg-eth0 contains only
DEVICE=eth0
ONBOOT=yes
HWADDR=52:54:00:b0:6c:5f
BRIDGE=ovirtmgmt
NM_CONTROLLED=no
IPV6INIT=no
IPV4_FAILU
In the mean time I found that the problem was
GATEWAY0=192.168.122.1
in ifcfg-ovirtmgmt
While it should be
GATEWAY=192.168.122.1
in fact the index is not kept in count for GATEWAY filed
Now with this line and also
NOZEROCONF=yes
I keep ok at boot with
$ ip route list
default via 192.168.1
- Original Message -
> From: "Gianluca Cecchi"
> To: "Alon Bar-Lev"
> Cc: "users"
> Sent: Saturday, December 29, 2012 7:36:00 PM
> Subject: Re: [Users] ovirtmgmt vs eth0 config in all-in-one config
>
>
>
>
>
>
&
Perhaps when I first installed f18, it got those entries and was configured
with network manager and then I only put
NM_CONTROLLED=no
Without changing accordingly its entries...
I have to check default f18 config during install...
___
Users mailing list
U
- Original Message -
> From: "Gianluca Cecchi"
> To: "Alon Bar-Lev"
> Cc: "users"
> Sent: Saturday, December 29, 2012 9:48:07 PM
> Subject: Re: [Users] ovirtmgmt vs eth0 config in all-in-one config
>
>
>
> Perhaps
Hi All,
In our ovirt 3.5 setup. i have always setup the ovirtmgmt bridge
manually .
The bridge consisted of 2 nic's
I'd have /etc/vdsm/vdsm.conf list net_persist = ifcfg
When i then deployed the host from the ovirt ui or api it would install
and would display the network setup correctly in t
On Mon, Nov 28, 2016 at 12:24 PM, wrote:
> Hi All,
>
> In our ovirt 3.5 setup. i have always setup the ovirtmgmt bridge manually .
> The bridge consisted of 2 nic's
>
> I'd have /etc/vdsm/vdsm.conf list net_persist = ifcfg
>
> When i then deployed the host from the ovirt ui or api it would instal
What I've been doing since oVirt 4 is just configuring one NIC manually
when I provision the server (eg: eth0, em1, etc) and then let oVirt do the
bridge setup. Once the engine is up I login to the UI and I use it to bond
the NICs in whatever fashion I need (LACP or active-backup). Any time I
tried
On Mon, Nov 28, 2016 at 3:42 PM, Charles Kozler
wrote:
> What I've been doing since oVirt 4 is just configuring one NIC manually
> when I provision the server (eg: eth0, em1, etc) and then let oVirt do the
> bridge setup. Once the engine is up I login to the UI and I use it to bond
> the NICs in
Thats what I used to do as well then on oVirt 4 it started screwing with
the the bond as well so I ended up just dumbing it down and figured using
the UI after the fact would be OK. I cant remember exactly what would
happen but it would be stupid little things like routing would break or
something.
Thanks for your responses but the ui is not an option for me as i am
dealing with loads of systems.
in 3.5 ovirt used to just accept the bridge as it was and incorporate
it, i am just wondering if i am facing a bug or a feature at the moment.
Charles Kozler schreef op 2016-11-28 15:48:
Thats
What happens when you configure the bond and then build the bridge manually
over the bond? oVirt installer should skip over it and not do anything.
Just make sure you have DEFROUTE set or routes configuration file as you
expect (this is what used to screw me up)
On Mon, Nov 28, 2016 at 10:06 AM,
I’m having trouble with that plan and I’m not even trying to put the ovirtmgmt
bridge on an existing bond. I have a pre-existing gluster setup with gluster
running on a bonded interface. The ovirtmgmt should go on a different
interface, but even that fails on the bond with the “torn down manuall
Hi Charles, that worked, thanks!!! allthough im still wondering where this
change was listed at any point between 3.5 and 4.0.
Verstuurd vanaf mijn iPhone
> Op 28 nov. 2016 om 16:11 heeft Charles Kozler het
> volgende geschreven:
>
> What happens when you configure the bond and then build th
Guys
Bug 1:
I have run the ovirt 4.1 installation many times now and everytime through
the deploy the ovirtmgmt bridge fails at ifup when used in conjunction with
bonded nic's
The deploy process stops when it cannot raise the bridge ifup. To fix, a
systemctl restart network works and I can start
re:bug 2 - confirmed - ovirtmgmt bridge is not created during initial
deploy of second host.
Workaround - maintenance 2nd host --> re-establish bond network from backup
files or manually, systemctl restart network --> engine gui --> second host
--> network --> add in ovirtmgmt bridge
Seems to work
Hello Ian,
Please share your vdsm.log, supervdsm.log and Engine logs from the time you
had this failure.
(please specify the date/time you started the process so we can know where
to look in the log)
Thanks,
Edy.
On Tue, Mar 14, 2017 at 6:31 AM, Ian Neilsen wrote:
> re:bug 2 - confirmed - ovi
Hi Edward
Let me know if this link does not work, I'll get you the logs another way;
https://mega.nz/#F!YFsgADAT!C7jOzkoH5BPZD3iChsY_5w
Date range of install 13th March to 14th March. Logs should all be there
for that date range.
cheers
Ian
On 16 March 2017 at 17:41, Edward Haas wrote:
> Hell
Hi Ian,
Please include only the relevant files of the specified date, I could not
figure out which ones to look at.
There are also no supervdsm logs (except one for node2, but for different
dates). Are there such logs at all?
Thanks,
Edy.
On Mon, Mar 20, 2017 at 2:59 AM, Ian Neilsen wrote:
> H
Edy
Arh ok, my fault. I will push up the files a bit later.
Ian
On 20 March 2017 at 16:47, Edward Haas wrote:
> Hi Ian,
>
> Please include only the relevant files of the specified date, I could not
> figure out which ones to look at.
> There are also no supervdsm logs (except one for node2, bu
93 matches
Mail list logo
