When testing the B205mini, we found that the SMA connector was tightened to the
most tight, but there may be no signal or the signal is weak.
Of course not always. Sometimes it is better to loosen the SMA connector a
little.
In short, the reception effect requires repeated adjustment of t
Hello Brian,
Thank you for the additional information.
Regarding #6, I meant that if you have two TwinRX daughterboards, see if
you get this problem when the fixed channel is on one daughterboard, and
the tuned channel is on the other.
Regarding screenshots, are you referring to any particular
Hey Wan,
Thanks for the quick response.
On Tue, Oct 25, 2022 at 7:59 PM Wan Liu wrote:
> Hello Brian,
>
> I'll see if I can reproduce with my TwinRX. Please provide some more
> information to help me reproduce...
>
> 1. Center Frequency of fixed channel 0
>
I tested at 915 MHz, but also 400 M
On 2022-10-25 18:15, Brian Padalino wrote:
I have an application where I am using both channels of the TwinRX
without using LO sharing. I am using channel 0 as a single frequency
channel, and I am using channel 1 to tune to different frequencies.
I am noticing that some transients happen on c
Hello Brian,
I'll see if I can reproduce with my TwinRX. Please provide some more
information to help me reproduce...
1. Center Frequency of fixed channel 0
2. Tuning range on channel 1
3. What tuning rate have you tried and what's the threshold between a clean
spectrum and a bad one?
4. Please
On 2022-10-25 18:20, Xingjian Chen wrote:
Hi there,
For FPGA programming, which GitHub branch and tag has FPGA
compatibility number 39.0? I tried to use UHD 4.3, however, it seems
that the FPGA (38) and Host (39) versions are mismatched after I git
clone the master repository. I also tried to
Hi there,
For FPGA programming, which GitHub branch and tag has FPGA compatibility number
39.0? I tried to use UHD 4.3, however, it seems that the FPGA (38) and Host
(39) versions are mismatched after I git clone the master repository. I also
tried to checkout the tag v4.3.0 for UHD-4.3, but it
I have an application where I am using both channels of the TwinRX without
using LO sharing. I am using channel 0 as a single frequency channel, and
I am using channel 1 to tune to different frequencies.
I am noticing that some transients happen on channel 0 - the fixed
frequency channel - as I a
I'd like to run GR 3.9 or later on the E310. Is there a documented process
to upgrade GR on the E310?
Thanks.
Rich
___
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
Hi Jorge,
hope you don't mind me replying on the list itself - as this is really just the same email
as before :)
So, yes, you'll need one of gmp or mpir. But these should be there, since you already seem
to have built GNU Radio for the ARM target, right?
That's what's confusing me.
Best r
10 matches
Mail list logo
