starting point in developing your own ruggedized solution to deploy. Also if
anyone else has recommendations or experience with X310 enclosure solutions,
I'd be curious to hear what you've made or worked with in the past.
Best,
Sam
On Sat, Sep 21, 2019 at 3:33 AM Arun kumar Verma via USRP
curious to hear what you've made or worked with in the past.
Best,
Sam
On Sat, Sep 21, 2019 at 3:33 AM Arun kumar Verma via USRP-users
wrote:
Hi Users
We would like to know whether X310 with TwinRx boards can be used for
temperature range -20 to +55 degree. Is temperature range is limited
Hi Users
We would like to know whether X310 with TwinRx boards can be used for
temperature range -20 to +55 degree. Is temperature range is limited by the
components used in the boards or the performance is not guaranteed over this
range.
Are the components used are industrial grade or commercia
Dear User
I am trying to combine bandwidth of two USRP B200 and get the final bandwidth
of around 100MHz. Our target is monitor the complete WiFi band 2.4-2.5Ghz.
I am attaching the image file for grc file. Any suggestions?
Arun
___
USRP-users mailing li
Dear Users
I have seen datasheet for B205 Mini and gain over frequency and gain index data
is available there. As we are developing our software where we need to have
exact gain value for that particular frequency and gain index. Is this data
available in csv format for some tabular format so th
cheduling at 0.01sec intervals.
From: Arun kumar Verma via USRP-users
To: Marcus D. Leech ; "usrp-users@lists.ettus.com"
Sent: Tuesday, 18 December 2018 2:16 PM
Subject: Re: [USRP-users] Phase Offset problem when center frequency is
changed dynamically
Dear Marcu
cember 2018 10:36 PM
Subject: Re: [USRP-users] Phase Offset problem when center frequency is
changed dynamically
On 12/15/2018 08:02 AM, Arun kumar Verma via USRP-users wrote:
Dear Users
I am facing problem of phase offset when i change center frequency
dynamically for TwinRX with X310
s D. Leech via USRP-users
To: usrp-users@lists.ettus.com
Sent: Monday, 17 December 2018 10:36 PM
Subject: Re: [USRP-users] Phase Offset problem when center frequency is
changed dynamically
On 12/15/2018 08:02 AM, Arun kumar Verma via USRP-users wrote:
Dear Users
I am facing proble
Sent: Monday, 17 December 2018 9:44 AM
Subject: Re: [USRP-users] Phase Offset problem when center frequency is
changed dynamically
On 12/15/2018 08:02 AM, Arun kumar Verma via USRP-users wrote:
Dear Users
I am facing problem of phase offset when i change center frequency
dynamical
Dear Users
I am facing problem of phase offset when i change center frequency dynamically
for TwinRX with X310 setup. Here is my C++ code,
Please advise
usrp_source1->set_rx_lo_source("internal",uhd::usrp::multi_usrp::ALL_LOS,0);
usrp_source1->set_rx_lo_source("
r 2018 at 13:35, Arun kumar Verma via USRP-users
wrote:
Hi
I am working on Direction of Arrival application using X310, just need
information which FPGA image was used for gr-DOA demo application?
Arun
__ _
USRP-users mailing list
USRP-users@lists
Hi
I am working on Direction of Arrival application using X310, just need
information which FPGA image was used for gr-DOA demo application?
Arun
___
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_li
Hi
I am trying to receive data from X310 ( 2 channels), in my case I am giving RF
input to RF-B port (channel-0 and Channel-1), i am able to see the FFT to one
channel only whether i give input to channel-0 or channel-1.
so what i feel that i am not able to set the stream arguments properly.
a
/08/2018 04:39 AM, Arun kumar Verma via USRP-users wrote:
Hi
Well i want to synchronize two B205 mini radios with PPS and 10MHz external
clock. Since only one Ref input port is available, is it possible to combine to
signal and give it to Ref input or in B205 both synchronization not at all
Hi
Well i want to synchronize two B205 mini radios with PPS and 10MHz external
clock. Since only one Ref input port is available, is it possible to combine to
signal and give it to Ref input or in B205 both synchronization not at all
possible?
Regards,Arun
_
sts.ettus.com
Sent: Wednesday, 26 September 2018 9:15 PM
Subject: Re: [USRP-users] B205 External Reference issue
On 09/26/2018 02:42 AM, Arun kumar Verma via USRP-users wrote:
Hi
We are using B205i-mini and we found that when I am sleclecting external Ref
using set_clock_sour
works?
Regards,Arun Verma
From: Marcus D. Leech via USRP-users
To: usrp-users@lists.ettus.com
Sent: Wednesday, 26 September 2018 9:15 PM
Subject: Re: [USRP-users] B205 External Reference issue
On 09/26/2018 02:42 AM, Arun kumar Verma via USRP-users wrote:
Hi
We are using
Hi
We are using B205i-mini and we found that when I am sleclecting external Ref
using set_clock_source("ëxternal"); I am getting intermodulation components in
Hz.I think supply for the internal oscillator is still on and it is not
compeletly shutting down. Is there any options to switch off the
Hi
We want to use X310 and Single TwinRX for our DF application. I have few doubts
1. For getting DF of 1 mS duration signal in 80 MHz IFBW, what should be my
interface speed requirement? Gigabit Ethernet is sufficient or I should go with
Express card or 10 GigE inetrface.
2. Whether two channe
Hi
We brought B205mini recently and we want to use three GPIO to control some
external device which require SPI interface, in the schematics the header
mentioned is J5 for GPIO while website USRP Hardware Driver and USRP Manual:
USRP B2x0 Series is mentioning J6 as GPIO header. Can you please su
20 matches
Mail list logo
