Hi,
On 27.07.2011 at 00:56 a...@ltmd.org wrote:
>
> Just want to add that I tested right now and found that the same fresh
> programs configurations and settings on the clean 32-bit system
> working pretty good. Should I try once again to use recordio program
> on a 64-bit system?
'recordio' onl
On 20.02.10 05:19, april majd wrote:
> I actually wanted to migrate from a qmail/vpopmail setup to a
> postfix/dovecot which uses mysql table. I tried copying the encryted
> password from vpasswd to the mysql table, but it is not authenticating,
> so I assumed the encryption method is different in
vpopmail/etc/. In the
> past, tcpserver always found it, AND the /etc/tcp.smtp.cdb file even
> though it was invoked thusly:
> -x/etc/tcp.smtp.cdb
> How does one get tcpserver to recognise the rules in both files?
Simple. Make /etc/tcp.smtp.cdb a symlink to ~vpopmail/etc/tcp.smtp.cdb
lways suid() to user
'vpopmail' *and* if you know pop3d doesn't need anything more then
vpopmails permissions to authenticate all incoming requests: why risk
the (admitted: very low) possibility somebody becoming root through
pop3d?
--
Best regards
Peter Palmreuther
Never try to outstubbo
27; -path '*/Maildir/cur/*' -mtime +60
--
Best regards
Peter Palmreuther
Sinead O'Conner: A chia pet before adding water.
is rather simple, I just sent it to
David. As don't I expect much interest in MD5-hashed[1] passwords
stored in database I didn't sent it here. If somebody is interested
please drop me a note.
[1] not to mix up with crypt() using MD5 to hash the password
--
Best regards
Peter Palmreuth
the MD5 hash of the password. I'll take a look at the
source later today or tomorrow, but it shouldn't be much work (except
for me, I have to compile and set up a MySQL-driven vpopmail *doh*; so
if anyone with vpopmail already fed by MySQL could take a look ...?).
--
Best regards
Peter Palmreuther
In space, lemmings need only open their helmets.
e output; every cutting,
editing or "information hiding" might lead to wrong results. I'd
therefore assume you use a test account you are about to delete after
your problem is solved, for not accidentally revealing a real e-mail
address or password.
--
Best regards
Peter Palmreuther
..."My coat contained a furnace where there used to be a guy."
e. Use 'vpopbull -f' plus '-h', 's' or 'c'
to put the mail into mailboxes.
What's the problem? What did you already try to do? Where did you
fail?
--
Best regards
Peter Palmreuther
Keyboard: Device used to enter errors into the computer.
switch Apaches
DocumentRoot, but it is just *one* possible way that *might* end up in
lesser work to do. *MIGHT*, if circumstances are good.
So we should be careful with advises what's better or worse, unless we
know all the facts. I think we should concentrate on advises *what's
possible*
il name space.
Two Apaches with x (x >= 2) IP addresses solve the problem of domain
not handled by vpopmail being served. First one running as vpopmail,
second (third, whatever) one running as usual web user.
What's your concrete problem/desire/imagination/wish?
--
Best regards
Peter Palmreuther
A man's got to know his limitations. (Clint Eastwood)
Hello Adi,
On Tuesday, July 26, 2005 at 5:41:24 PM Adi wrote:
> Everything is possible, but I think you'd better switch Apache's
> DocumentRoot to (let's say) /home/vpopmail/domains/blabla/htdocs/ than
> to modify vpopmail's default locations.
Why?
--
Best regard
ains/DOMAIN
but that shouldn't really matter as long as the goal is to get all
files of a DOMAIN into one directory and its children.
--
Best regards
Peter Palmreuther
"Matrimony isn't a word, it's a sentence."
mains/$DOMAIN/$USER/Maildir/'.
> Any ideas why this isn't working?
Yes.
- Either you set up something wrong
- Or it is working, you just don't see it.
--
Best regards
Peter Palmreuther
Choosy perverts choose .GIF!
> Suggestions?
Yes: what (exactly) do the logs say? What does 'qmail-showctl' say?
--
Best regards
Peter Palmreuther
"US out of North America, NOW!!" - Richard O'Rourke
daemon method, as this does not lead
to passwords being remembered in vpasswd).
Than run Perl/awk to export 'vpasswd' to whatever format you need, it
really is only splitting the records up on ':', each line a user.
--
Best regards
Peter Palmreuther
Push any key. Then push the any other key.
Hello Jeremy,
On Friday, July 8, 2005 at 2:33:44 AM Jeremy wrote:
> On Thursday 07 July 2005 02:31 am, Peter Palmreuther wrote:
>> On Wednesday, July 6, 2005 at 3:36:39 PM patrick wrote:
>> >>Please post the output of
>> >>
>> >>/var/qmail/bin/qmail
ELAYCLIENT is set (which is done if you
SMTP-AUTH). Additionally follow Jeremys advice to delete these domains
from 'locals' and insert them formatted correctly into
'virtualdomains' to make vpopmail handle them again.
--
Best regards
Peter Palmreuther
Your true value depends entirely on what you are compared with.
On Tuesday, July 5, 2005 at 10:56:26 PM Steve wrote:
> On Tuesday 05 July 2005 16:50, Peter Palmreuther wrote:
>> Hello List,
>>
>> On Tuesday, July 5, 2005 at 7:24:19 PM patrick wrote:
>> > by the way: does anyone know a good howto to use smtp after pop with
>&
erver'. See most of the stuff is already set up, as I've seen in
your 'run'-script ('-x' is present and just needs to point to the
correct file, which can be achieved with the help of a symlink).
--
Best regards
Peter Palmreuther
Blessed are the censors, for they shall inhibit the earth.
thentification...
Well, that looks in fact like an open relay.
Please post the output of
/var/qmail/bin/qmail-showctl
--
Best regards
Peter Palmreuther
A boy gets to be a man when a man is needed.
But as far as I understood vchkpw
> should do the job...
Correct. *You* use 'vchkpw' as password checking tool, because you
want to check against vpopmail handled user pool. Forget about the
other tools, unless you want to authenticate against a different data
base than vpopmails.
--
Best regards
Peter Palmreuther
Blessed are they that run around in circles, for they shall be known
as wheels.
How comes checkpassword in that?
What?
> I haven't installed this cmd5check...something-tool... Do I need to?
What 'cmd5check...something-tool'?
I can't remember any 'cmd5check...something-tool' regarding to
vpopmail.
--
Best regards
Peter Palmreuther
I belong to no organized party - I am a democrat.
d
additionally using a .cdb-file for static entries?
Does the patch nevertheless a MySQL-lookup, even if something is found
in .cdb-file? In this case a .cdb-file in fact wouldn't make much
sense, except the fact the answer from MySQL could kept short (no
result) and some parsing time could
ing more time than this quick
local, read-only, precise access in a small file.
But it's your system, whatever makes you happy and serves your needs
can be your solution.
N.B.: Number of authentication should not play a role in accessing
your cdb-file, if you're configured vpopmail to
se 'tcp.smtp.cdb'
(which ever of the two you prefer) and let tcpserver *additionally*
use MySQL database to look for dynamic relay allowances.
--
Best regards
Peter Palmreuther
Wonder what my life would be without me.
rname-password string to file descriptor 3
of vchkpw and vchkpw than updates vpasswd.
--
Best regards
Peter Palmreuther
A woman is like a dresser ... some man always goin' through her
drawers.
Hello Casey,
On Sunday, June 19, 2005 at 12:22:05 AM Casey wrote:
> On Saturday 18 June 2005 10:13, Peter Palmreuther wrote:
>> How did you log in? SMTP-AUTH using CRAM-MD5?
> PLAIN with IMAP (dovecot).
And dovecot is configured to explicitly use 'vchkpw' and 'vchk
Hello Ruslan,
On Friday, June 17, 2005 at 3:02:52 PM Ruslan wrote:
> +OK <2948.1119011293@/home/vpopmail/bin/vchkpw>
Check your POP3 daemon startup script. Seems you're starting
... qmail-popup vchkpw ...
instead of
... qmail-popup HOSTNAME vchkpw ...
--
Best regards
Peter P
text password in there if it fails to find one in
.cdb file.
--
Best regards
Peter Palmreuther
We care a lot about the Garbage Pail Kids, they never lie...
Hello Casey,
On Wednesday, June 15, 2005 at 9:08:38 AM Casey wrote:
> On Tuesday 14 June 2005 20:44, Peter Palmreuther wrote:
>> Maybe because of easier mail user management and the lack of necessity
>> to create a system user ID for every mail recipient?!
> Well, I suppos
. a limitation I included silently one should in
fact be aware of.
--
Best regards
Peter Palmreuther
A woman is only a woman, but a good cigar is a smoke.
l incoming can e.g. inspect
"$ENV{SENDER}" for internal domain and if not 'exit(100)' to bounce
the message. If the mail is internal simply 'exit(0)' and have
"|vdelivermail '' bounce-no-mailbox" in .qmail file.
--
Best regards
Peter Palmreuther
The end move in politics is always to pick up a gun. - Buckminster
Fuller
$ADDRESS
At least 5.4.5 has this possibility. If you further enforce SMTP-AUTH
for all SMTP-connections that need to relay (i.e.: don't set
RELAYCLIENT for anything other than 127.0.0.1) and disable "roaming
users" you should have gained what you're looking for.
--
Best regards
on stdin', especially nothing
I'd call "prone to fail".
Sure, for some 10k users cdb might become slow, when it comes to many
necessary cdb file recreations (i.e. many altering IP addresses). But
that does not necessarily mean it's slow, poorly designed or "prone to
fail" for anybody else with much less users. It's a good, known to
work reliable, solution that perfectly integrates into existing
tcpserver usage ...
--
Best regards
Peter Palmreuther
Rap is to music what Etch-A-Sketch is to art.
ce no clients use it. So if that's in the way it can be removed.
The posted 'smtp_mail()' excerpt from 'qmail-smtpd.c' ain't patched
with 'chkuser'-patch at all ... So chkuser-patch can't be the culprit,
if this is the source you actually compiled.
--
Bes
more.
'truss' is (can be) present on Unix while Linux has 'strace'. As I
didn't know which system you're on I gave you both commands.
Please execute 'strace' as follows:
strace -fF -o /tmp/qmail-smtpd.log -s 4096 ./qmail-smtpd
and post the (complete) file /tpm/qmail-smtpd.log (as text attachment).
--
Best regards
Peter Palmreuther
Never put off till tomorrow what you can ignore entirely.
in chkusr it fails?
*exactly*? Compile qmail without and '-O' and with '-g2' and run
qmail-smtpd in 'dbg' (or similar).
Rough first guess? Use 'strace' or 'truss' (with "follow fork" option)
to get an estimated idea about when it segfaults.
--
Best regards
Peter Palmreuther
Petrified Spare Ribs: Jurassic Pork
f qmail and the SMTP-AUTH-patch: pay someone to make the
necessary changes who can handle C.
But:
1) Stop crying. The way you find it is the way it *works*
2) Stop bothering this list. This mailing list is about *vpopmail*,
you have a problem with qmail-smtpd. qmail has it's own mailing
Hello Marco,
On Tuesday, April 5, 2005 at 5:17:53 AM Marco wrote:
> I did compile vpopmail the way you suggested ... and now i'm
> getting another error - different but same nature.
Have you done a 'make distclean' in vpopmail source tree before you
run the new configure?
-
onds to send mail. The server is >2G P4..so it's not the server.
> Is it the patch...or something else ??? Thanks in advance ;)
http://www.lifewithqmail.org/lwq.html#smtp-slow
--
Best regards
Peter Palmreuther
Do not follow in the footsteps of men of old; seek what they sought.
#x27; you'd have to rely on
'cdbmake' from cdb-tools [1] which is for sure a fine program, but the
raw-format it needs is anything but "easy" (to build manually).
[1] http://cr.yp.to/cdb.html
--
Best regards
Peter Palmreuther
I'm too sexy for this origin
ecurity for these users. I don't want
> something like a external hacker using my SMTP server to send SPAM
> for my users and using a email like [EMAIL PROTECTED]
You can't prevent somebody sending mail to '[EMAIL PROTECTED]' if
'mydomain.com' is in your 'rcpthosts'. No matter if you enable
SMTP-AUTH or not.
[1]: http://untroubled.org/mailfront/
--
Best regards
Peter Palmreuther
In case of fire, yell "FIRE!
your command line misses the part.
P.S.: Please try to configure your MUA to send plain text only, these
pseudo attachments LookOut send are only annoying, but in no way
useful on a mailing list like this. About 2/3 of your messages size
was occupied by this superfluous 'winmail.dat' attachment.
--
Best regards
Peter Palmreuther
Weekend, where are you?
Hello Blist,
On Tuesday, May 25, 2004 at 6:22:11 PM you wrote (at least in part):
> After tyring with these values I get:
> 24597 --- SIGSEGV (Segmentation fault) @ 0 (0) ---
That's not necessarily easy to debug.
First try this:
$>printf "[EMAIL PROTECTED]" >/tmp/auth.data
$>setuidgid /usr/
rect B64-data would be:
Username: YnJvb2tzQGJyb29rc3JveS5jb20=
Password: amo=
Please try again with these data and report in.
--
Best regards
Peter Palmreuther
I have been guilty of kicking myself in the teeth...
g output, except in case of an error in
which case you'd see it via 'ps' and a 'grep' for 'readproctitle'
--
Best regards
Peter Palmreuther
Life sucks. Then you die
m to change the
password for their own safety using qmailadmin (or whatever front end
you have set up).
--
Best regards
Peter Palmreuther
There are never enough hours in a day, but always too many days
before Saturday.
e change globally.
Don't forget to run 'vmkpasswd $DOMAIN' after you modified the
'vpasswd' file(s) and before you try to login (e.g. via POP3).
--
Best regards
Peter Palmreuther
If the probability of success is not almost one, then it is damn near
zero.
7;softlimit -m ...' and so on).
else we'll not see what qmail hands over to vchkpw.
--
Best regards
Peter Palmreuther
SLIDING DOWN THE RAZOR BLADES OF LIFE
e encrypted passwords in my vpasswd
confirm this assumption.
> Is this a known issue?
Not I'm aware of.
> I've tested with vpopmail 5.4.3 + qmailadmin 1.2.0 AND also with
> vpopmail 4.9.10 + qmailadmin 0.45 (our "museum" servers), both have
> the save problem.
Maybe the 'museum' might be the problem: if their libcrypt is too old
it might be it's not yet aware of MD5, who knows.
--
Best regards
Peter Palmreuther
Use it up ... Wear it out. Make it do ... Or do without.
he blank into fd #3 or if vchpw insertes it, and in the former case
it's a file for 'dbg' or similar (and a '-g2' compiled qmail), to
figure who inserts it. In the latter case one has to 'dbg' vchpw to
see when this blank appears first.
--
Best regards
Peter Palmreuther
"I am not part of the problem. I am a Republican." -- Dan Quayle
trivia --
tivate TLS by create a certificate, and You will be much better off
| to create an encrypted connecton to Your SMTP server by the SMTP Enc
| smtps 465/tcp#smtp protocol over TLS/SSL (was ssmtp)
| smtps 465/udp#smtp protocol over TLS/SSL (was ssmtp)
`-
--
Best regards
Peter
Hello List,
On Saturday, May 22, 2004 at 11:24:43 PM [EMAIL PROTECTED] wrote (at
least in part):
> The flamewar did NOT start with my message.
PLO *beep*
--
Best regards
Peter Palmreuther
Bumper sticker: "All the parts falling off this car are of the very
finest British manufacture"
really do, you're much poorer than
I thought and you don't even deserve being read on this list.
P.S.: If you feel the need to reply: please try trimming your quotes
to the relevant parts. It's is not necessary to full quote and
increase list traffic above the unavoidable level. I don't even ask
for slightly reducing your signature; 18 lines is quite a lot.
--
Best regards
Peter Palmreuther
Eggheads unite! You have nothing to lose but your yolks. - Adlai
Stevenson
y can't tell.
So please stop whining, write a SMTP-over-SSL-HOWTO and be happy.
> I prefer encrypted streams,
You're free to do. But what's the relation to a SMTP-AUTH problem?
--
Best regards
Peter Palmreuther
I am evil, I make the devil sign.
the thing and never got that
> answer.
> http://www.inter7.com/vpopmail/doc/vdelivermail.html
> Thanks Pit!
Thanks for your reply that shows the incompleteness in docs.
I've created and send a patch to CVS version. Maybe it's incorporated
and Inter7 website updated according
But you can also delete it instead.
|
|update your .qmail-default file from something like this:
|| /home/vpopmail/bin/vdelivermail '' bounce-no-mailbox
|
|to something like this:
|| /home/vpopmail/bin/vdelivermail '' delete
`-
Reading s***s, I know.
--
Best re
tivated JavaScript", if I'm right :-)
The "FireFox w/ deactivated JS" way has advantage of some more "visual
effects" like "Wow, this looks incredible similar to a real PayPal
login form" :-)
--
Best regards
Peter Palmreuther
An android would never rip your head off! --Kryten.
ove mentioned URL is this page:
https://211.28.155.210/.verification/hide/sysdll.php
Open with deactivated JavaScript to fully "enjoy" it without being
sent somewhere else :-)
--
Best regards
Peter Palmreuther
Nothing is impossible for anyone impervious to reason.
s the server sends, 'C:' indicates lines you
should type / copy&paste or enter any other way for them being sent
to the server.
I'm quite sure this test will success and than you know it's the MUA
that sends these cryptic envelope from, From: and To: strings. The
'@IP' in 'Received:' lines is not part of your problem, as it is never
used for any delivery action, neither forward nor for the bounce.
--
Best regards
Peter Palmreuther
What do you mean, QWK? It took me over an hour to read!
n eye open
if vchkpw exits '0' or not. So I'm still convinced it is not vpopmail
that is the culprit, of course unless you've done heavy modifications
on vpopmail or qmail or have another setup not shown yet.
--
Best regards
Peter Palmreuther
If you're happy and you know it clunk your chains.
hat's your qmail-smtpd invocation line?
2. Are you sure this ain't a qmail problem and should be discussed on
qmail list?
--
Best regards
Peter Palmreuther
Canadian DOS: "Yer sure, eh?" [y/n]
What takes
time most times this behavior is seen is reverse resolving of
connecting client. So what's your 'tcpserver ... qmail-smtpd'
invocation line[1]?
[1]: ps auxwww |grep '[t]cpserver .*qmail-smtpd'
--
Best regards
Peter Palmreuther
Progress is made on alternate Fridays.
Hello jasmine,
Friday, April 16, 2004, 3:05:20 AM, you wrote:
>>> I got strange problem. I don;t know when (what version) but suddenly a
>>> domain that have different that ~vpopmail/domains home stopped authorizing
>>> using vchkpw.
>>> [...]
>>> Is this a bug in vchkpw?
>> Probably not. What us
year there were 58 mails from different people having this
flag set.
I can only repeat I'm really sorry for this inconvenience :-(
--
Best regards
Peter Palmreuther
Pros are those who do their jobs well even when they don`t feel like
it.
eld.
If you enable --learn-password for your new vpopmail it should fill
the clear password fields automatically after successful
authentication done by the user.
--
Best regards
Peter Palmreuther
What do you call a sorority girl with a runny nose? Full.
NV{'RELAYCLIENT'}' and you're done.
Or alter vpopmail sources to set QS_SPAMASSASSIN additionally to
RELAYCLIENT for POP3 authenticated users.
--
Best regards
Peter Palmreuther
Man steps in with a terminal grin... blue skies turn to grey...
Hello Devendra,
On Monday, April 12, 2004 at 12:42:53 PM you wrote (at least in part):
> Is it possible to not to do rblsmtpd look-up for smtp-authenticated users?
No, because rblsmtpd looks up the IP before SMTP-AUTH is (or can be)
done.
--
Best regards
Peter Palmreuther
Since we're
iled: $?"' - vpopmail
Inspect /tmp/x where vchkpw failed.
This assumes you're:
- running Bash
- using Linux
If you're not using Linux but a *BSD replace 'strace' with an
appropriate call to 'truss'.
>>Why does Hawaii have interstate highways?
> And wh
w?
Probably not. What user is qmail-popup run as? Probably not a user
(UID) that is allowed to chdir() to 'klub.olga.pl' domain directory or
read vchkpw.cdb in there?
--
Best regards
Peter Palmreuther
Why does Hawaii have interstate highways?
27;, it'll append '/var/qmail/control/defaulthost'
and handle the mail according to how this 'defaulthost' is set up.
You'll have to make qmail check for '#' first and translating it into
'@'. Might be better to enforce incoming mail are addressed co
to
> edit the source code/include files and recompile?
You have to recompile. Edit 'vpopmail.h', the line that says:
#define ATCHARS "@%/"
--
Best regards
Peter Palmreuther
Government is a burden on the people.
ady is one: just use an arbitrary calculator to
translate an arbitrary decimal value into binary representation.
No "translate" all the hex values for different flags into binary and
you'll see: they all have /exactly/ one bit set to 1. Not more, not
less. And this is all about how it wor
a the requeue
with different recipient ($env_recips or the like). The new recipient
should be a local/virtualdomain recipient address that has a
blackholed delivery: a dot-qmail file containing only one line:
,- [ .qmail-blackhole ]
| #
`-
HTH
--
Best regards
Peter Palmreuther
All
here are other people that like to really
blackhole some senders instead of simply rejecting their messages.
--
Best regards
Peter Palmreuther
In the middle of a fight, a hockey game broke out.
uire/ SMTP-Auth when POP3-b4-SMTP
already set RELAYCLIENT=""
But maybe I got it wrong ... Joel?
--
Best regards
Peter Palmreuther
Can you imagine a world without men?? No crime and lots of happy, fat
women.
he same
database for possible RELAYCLIENT settings try this:
telnet $SERVER 35
EHLO _
MAIL FROM:<>
RCPT TO:<[EMAIL PROTECTED]>
QUIT
If this fails: please post the error you get, your qmail-smtpd startup
script and the result of above 'env'-test.
--
Best regards
Peter Palmreuther
Boob's Law: You always find something in the last place you look.
ot of work to do, and you'd have
to take care of all new created dot-qmail files in your setup.
--
Best regards
Peter Palmreuther
COBOL: Crappy Obsolete Butthead Oriented Language.
n that case even I do not want to bounce the mail just trash
> (/dev/null) it.
using badmailfrom is like /dev/null'ing for you. You'll neither see
the bounce nor does your qmail have to handle it (even if it can't be
delivered). That the absolutely easiest and cleanest soluti
\
| auto_qmailq.c.tmp && mv auto_qmailq.c.tmp auto_qmailq.c
| -
| +#/qmail-queue
| auto_qmailq_destdir.c: auto-str conf-qmailq
| ./auto-str auto_qmailq_destdir "`head -1 conf-qmailq`" > \
| auto_qmailq_destdir.c.tmp && mv auto_qmailq_destdir.c.tmp \
`-
--
Best regards
Peter Palmreuther
Paint a number on her head and Sinead's a billiard ball.
a minimum. Nevertheless rsync regularly, moving the queue
over can be a PITA as qmail is quiet picky about the queue structure.
A minimum of difference between the two systems and the queue might be
corrupted.
--
Best regards
Peter Palmreuther
To a dog his owner is Napoleon; hence their popularity.
ts and reacts according to this data.
Have a look at the archive for further information. The subject of
corresponding thread was
"Heureka! Finished POP3-Frequency-Patch (against bruteforcing)"
initiated by
knom
--
Best regards
Peter Palmreuther
Wealthy people are no happier than those of modest means.
o deals with his own mail server I simply expect to be able
to read documentation to make it as secure as possible. When this
person got a hint I expect it to be able to carry over this knowledge
to other problems as well. That's the responsibility someone has when
he/she wants to have his/her own server. Sorry for that opinion.
--
Best regards
Peter Palmreuther
Death is God's way of telling you not to be such a wise guy.
self (when told in .cdb file).
--
Best regards
Peter Palmreuther
The Greatest of Faults Is To Be Conscious of None
Hello,
On Sun, Feb 29, 2004 at 11:25:05PM +0100, Mathias Haas wrote:
> Maybe the first questions should be: Where can I find some good info on
> the 'vaddaliasdomain'- command in vpopmail?
UTSL[0]
> The little documentation I've found is sparse. I assume I haven't
> searched in the right plac
Hello,
On Fri, Feb 27, 2004 at 10:57:37AM -0300, Juliano Primavesi - CyberWeb Networks wrote:
>>> Your other option is to run the mysql patch for tcpserver. This lets
>>> tcpserver lookup the relay table instead of using the cdb. Far more
>>> efficient in my finding so far.
> Where can I find thi
On Wed, Feb 25, 2004 at 04:30:56PM -0500, X-Istence wrote:
>>> Any idea which email clients support that? [SSL]
>> There're some: "Lookout Quickly" can do, IIRC, so can 'The Bat!',
>> 'Pocomai', 'Becky' and Eudora (to name the Windows fraction). Some of
>> them even can 'STARTTLS'. For *nix there a
On Wed, Feb 25, 2004 at 01:45:53PM -0500, Jeff Koch wrote:
>>> I have started seeing stunnel processes owned by vpopmail in the process
>>> log. Can anyone explain what that's about? or should I be concerned?
>>>
>>> vpopmail 6977 0.0 0.0 3272 848 ?SFeb19 0:00
>>> /usr/sbin/stu
--
Best regards
Peter Palmreuther
All probabilities are 50%. Either a thing will happen or it won't.
This is especially true when dealing with someone you're attracted to.
d?
--
Best regards
Peter Palmreuther
You don't sew with a fork, so I see no reason to eat with knitting
needles.
e .qmail-default?
> I try to modify .qmail-default but vdelivermail cannot permit to move
> somewhere else the mails.
man dot-qmail
--
Best regards
Peter Palmreuther
Politicians should read science fiction, not westerns and detective
stories.
' would give a more concrete hint and
the message(s) wouldn't be lost. So the admin can correct the problem
and there's nothing lost but a little time.
--
Best regards
Peter Palmreuther
Veni, Vedi, Visa. - I came, I saw, I did a little shopping.
| extra.h. Recompile qmail. Put ./msg-log into ~alias/.qmail-log.
|
| You can also use QUEUE_EXTRA to, e.g., record the Message-ID of
| every message: run
|
| | awk '/^$/ { exit } /^[mM][eE][sS][sS][aA][gG][eE]-/ { print }'
|
| from ~alias/.qmail-log.
`-
And filter yourself.
--
Be
ck: 'strings /var/qmail/bin/qmail-smtpd |less' and
search for 'RELAYCLIENT='.
--
Best regards
Peter Palmreuther
How do you tell when you run out of invisible ink?
r or qmail-scanner. But if one does not need the full
power of qmail-scanner a good choice as it seems.
--
Best regards
Peter Palmreuther
There is no 'I' in 'team', yet there is an MVP.
net/projects/qscanq/
-> http://budney.homeunix.net:8080/users/budney/software/qscanq/
> I have lots of mail servers and some of them are too large
> to run things written in perl. I'm looking for something made with real
> programming language, like C or C++.
qscanq meets your
, I simply insert a rule
dedicated to his IP that makes his messages 'bypass' qmail-scanner the
same way mails from 127. do: a special, dedicated QMAILQUEUE setting.
So again: what flexibility do you need and don't get with 'export
QMAILQUEUE'?
--
Best regards
Peter Palmreuther
Famous last words: "It won't bite."
e: it WILL
parse the message through virus scanner! Set 'RELAYCLIENT' only
prevents qmail-scanner from passing message through spamassassin!
Please inspect qmail-scanner sources if you don't trus me.
--
Best regards
Peter Palmreuther
File not found, I'll load something *I* think is interesting.
1 - 100 of 427 matches
Mail list logo
