There could be several reasons for this. Are all 10 drives defined in the
storage unit? Do you have enough licenses for 10 drives? The fact that it is
different drives is normal, NBU uses a least used first algorithm to
determine which drive to use.
Regards,
Patrick Whelan
VERITAS Certified Ne
I have recently upgraded from 6.5.2 to 6.5.3 and am having some issues
following the install.
My environment is: 1 master server at 6.5.3, 1 media server at 6.5.3, 3
media servers at 6.5.2. 2 libraries: 1 SAN attached DELL Power Vault 136T with
4 tape drives, and 1 StorageTek L20 with 2
Found a way:
bpimagelist -media -d 03/03/2009
From: Baumann, Kevin [mailto:kbaum...@akamai.com]
Sent: Wednesday, March 18, 2009 3:45 PM
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] Tape usage for last 15 days
All,
Is there a way to find out how many tapes that I have
Under reports do the 'Tape Written' report for the dates you want.
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Baumann,
Kevin
Sent: Wednesday, March 18, 2009 2:45 PM
To: VERITAS-BU@mailma
Have you considered partitioning the library and treating it as two
separate libraries?
--
Jack Forester, Jr.
Senior Recovery Administrator
Mylan
1000 Hampton Center
Morgantown, WV 26505
jack.fores...@mylan.com
Phone: +1.304.554.6039
anil.mau...@sanofi-aventis.com
Sent by: veritas-bu
On Sat, Mar 14, 2009 at 8:48 AM, Dennis Peacock <
netbackup-fo...@backupcentral.com> wrote:
>
> On your master/media server, you may want to check and see if you have the
> following tuning parameters in /usr/openv/netbackup/db/config:
>
> NUMBER_DATA_BUFFERS
> SIZE_DATA_BUFFERS
> SIZE_DATA_BUFFER
The best approach must be:
1) Be sure that your ACSLS is in a clustered environment, cause its is
going to be a critical service for whole operation to work
2) Upgrade all your media servers to 6.5.3 (site A)
You can follow 2 ways:
1) Make your Site A Master Server a Media server and make all
All,
Is there a way to find out how many tapes that I have used in the past 15 days?
I don't need to know what is on the tapes, just if they have been written to
or not.
Any help will be greatly appreciated!
Thanks in advance.
-Kevin
__
On Wed, Mar 18, 2009 at 1:36 PM, Reynolds, Susan K. <
sreynol...@semprautilities.com> wrote:
> Does anyone here use SUDO for non-root access to Netbackup; and, if so
> can you send a copy of what your SUDOERs file looks like?
>
> Interested in allowing backup admins the ability to do their jobs as
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
This is what I use:
# Cmnd alias specification
Cmnd_Alias NETBACKUP = /usr/openv/netbackup/bin/,
/usr/openv/netbackup/bin/admincmd/,
/usr/openv/volmgr/bin/, /usr/openv/bin/, /usr/openv/netbackup/bin/goodies/
%sysad ALL=(ALL) ALL
%sysad ALL=
Look for <16> (that is a 16 inside of the arrows - this usually an
error.
That is the best I can do for you because there is a lot of stuff in
them.
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
sachinar1
We had an issue where we were almost maxed out on one of our Data Domain
appliances. We went about it in two ways. We went into NBU and expired
images via NBU that we knew should have been expired already.
Our issue came about after an NBU upgrade when the catalog lost track of
a large numb
We just install netbackup console on the windows pc's of the NB admins
then add the pc name to the list of other servers on the master
properties.
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of
Reynolds, S
Does anyone here use SUDO for non-root access to Netbackup; and, if so
can you send a copy of what your SUDOERs file looks like?
Interested in allowing backup admins the ability to do their jobs as
needed while trying to strike a balance with security concerns of UNIX
group.
Thanks for your help.
Thanks Randy, however I would like to ask you other question. How much
time does the clean process run ? What datadomain system are you using ?
We have DD580g systems with 20TB limit. We are planning to upgrade to
DD690 systems as well.
From: veritas-bu-boun...@mailman.eng.auburn.edu
[ma
I require , Backup Include files and Media used for the backup also for
reporting along with the fields mentioned below.
Could any one help out with a autamated solution for such a report from
Netbackup ?
Regards
K.O Kurian
IBM India Private Limited
(+91-9810912456 | *: ko.kur...
How many drives in your storage unit(s)?
-Original Message-
From: mcw012765
Sent: 18 March 2009 19:20
To: VERITAS-BU@mailman.eng.auburn.edu
Subject: [Veritas-bu] Not all drives appear to be used
I am a Netbackup 6.5.2A user. I currently have 100+ clients that I back up on
a daily ba
Hi!
I m new to Netbackup and required help for reading error logs.
There are so much written in logs in contination and I tried understanding
it but it was invain
Can some one help?
+--
|This was sent by sachin...@gmail.com vi
What we do when space gets tight on our DataDomain is to identify Images that
are soon to expire within NBU. Go ahead and pre-expire them, then afterwards
kick off a clean.
In our case, we use VTL and pre-expire the volumes that are soon to expire (we
have 3 month retention), go out to the DD a
Tape drive usage can be based on your storage unit.
If you have 10 tape drives but you have 2 storage units with 4 drives
each
That means at the most you will only use 8 drives.
So it could be that the storage units you are using are not set up to
utilize all the drives.
As to the fact that 2 di
I am a Netbackup 6.5.2A user. I currently have 100+ clients that I back up on
a daily basis (fulls and cumulative incrementals). I have a Sun/STK SL3000
tape library with 10 LTO-4 tape drives. My issue is with tape drive usage. I
have multiplexing and multistreaming turned on for all of my p
Hi,
We are using NBU 6.5.3 and all our backups are going to Data Domain. One of our
backend disk is at 100% and we want to get some space back.
However we do not know how can we get it faster other than running the clean
process of DD, even after which we will be getting 265 GB space.
Any help
Hi
I have one big library ( 8500 ) controlled by ACSLS. We have two site
site A ( one master and many media server all running on 5.5.x have
small library ( DLT)(NO ACSLS here) ) and site B ( one master and many
media server all running 6.5.3 with big library 8500 on ACSLS ).
I need to st
This tech doc may help.
Document ID: 247902
http://support.veritas.com/docs/247902
E-Mail this document to a colleague
DOCUMENTATION: The command line equivalents for running the NetBackup
reports available in the NetBackup user interface
-Original Message-
From: veritas-bu-boun...@m
On Wed, 18 Mar 2009, Dennis Peacock wrote:
>
> I haven't found a way to do thisdoes anyone here know of a way to do this?
>
> +--
> |This was sent by dpe...@acxiom.com via Backup Central.
> |Forward SPAM to ab...@backupcentr
I haven't found a way to do thisdoes anyone here know of a way to do this?
+--
|This was sent by dpe...@acxiom.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+---
Greetings:
Aptare Storage Console will give you this information from the job details
link on the Job Summary report.
there may be a way to get this report from a sql script .
Aptare stores it's information in an Oracle database, and has some custom
scripts that can be run from cron.
They do h
Hi Forum,
I am trying to get one report which has following details of any policy.
Backup ID / Job IDClientBackup Date/Time
Policy Number of Files Kilobytes
Schedule NameSchedule Type Ela
Hi
This problem caught Symantec out, as the failures were 40, 41, 89 and 174 -
very very odd, and happening with one client.
After over 1.2gb of logs, the problem I found (not symantec) was due to a
hardware problem, that DIDNT even report it had a problem !
Even so, since last night, the bac
I dont! That was the point . Win2k3 Standard Server mate. ... as per
subject line :-)
And as per my email
>> The docuemnts seem to show its related to a Solaris box, but this is
a Windows SAN Media Server.
Simon
From: Steve Fogarty [mailto:steve.foga
Unfortunately, that document was of very, very little help!
Without Symantec help, I actually narrowed down the problem to a
hardware level.
Even caught Symantec out with this problem.
As of this morning, everything is now ok. Many MANY thanks for the
response Peter, at least you replied back
For inline copy the answer is yes. (At the schedule level or at the
lifecycle policy storage unit)
For the Auxiliray copy, it depends what you mean with the word Auxiliray.
Netbackup can do automatic and manual duplications. You can restore from the
copy you choose and you can delete a copy. But f
You also need one database license for each database type.
-Original Message-
From: veritas-bu-boun...@mailman.eng.auburn.edu
[mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of Jim Horalek
Sent: Wednesday, March 18, 2009 12:15 AM
To: 'Kathy Baron'; VERITAS-BU@mailman.eng.aubur
Actually, TOP said he had backed up to an EDL/3DL (EMC Quantum box).
Jeff (Kaplan),
Is it possible to use tape shadowing on the replicated system, so that the
backup to one virtual tape, replicate to another virtual tape, then eject
that virtual tape to create a physical tape?
__
Hi All,
Im new to NBU. Does NBU support Auxiliray and Inline copy ? If yes, what does
it require ?
BR,
Martin Panggabean
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
35 matches
Mail list logo
