Same here i hava Pinnacle PCTV Plus and i am trying for the past couple of weeks.
But hey u try to upgrade to bttv-0.7.103 and similarly for i2c and then send the dmesg.[EMAIL PROTECTED] wrote:
Hi,I just bought new Pinnacle PCTV tuner (PAL B) and I can't get it workingin linux...no matter what I do
Hi,
I just bought new Pinnacle PCTV tuner (PAL B) and I can't get it working
in linux...
no matter what I do or try, there are no channels found and in zapping
or xawtv...I don't even get "snow" thru entire screen but only on few
first lines.
I checked in old mailing lists posts and I have everyth
] From: [EMAIL PROTECTED]
] [mailto:[EMAIL PROTECTED]] On Behalf Of Gert Vervoort
] Forgot that some encoders also support MPEG-1.
] And also most MPEG encoders do have a from of noise
] reduction, but this
] is very encoder specific.
Don't leave out other encoding formats too. Here is a refere
Hi Alexandre,
On Tue, 2003-02-04 at 11:23, Alexandre Abbes wrote:
> Now all is OK in color.
Thanks for testing, committed the fix to CVS. I'll release a new driver
version shortly (it also has an oops fixed - so it needs a release
soon).
Ronald
--
Ronald Bultje <[EMAIL PROTECTED]>
Linux Video/
Have you checked this out?
http://www.lavrsen.dk/sources/webcam/motion_guide.htm
--Charlie
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Daniel Moone
Sent: Friday, February 07, 2003 8:49 PM
To: [EMAIL PROTECTED]
Subject: xawtv-3.84 where's xawtv?
Tak
PlasmaJohn writes:
> On Sat, 8 Feb 2003, Marcus Metzler wrote:
>
> > There is also a driver for the em8400 chip, but it's not publicly
> > available.
>
> Will it be? I hear good things about the X-Card, particularly compared to the
> dxr3.
>
> While the combo encode/decode card is "int
On Sat, 8 Feb 2003, Marcus Metzler wrote:
> There is also a driver for the em8400 chip, but it's not publicly
> available.
Will it be? I hear good things about the X-Card, particularly compared to the
dxr3.
While the combo encode/decode card is "interesting" I'd much prefer seperated
functions
On Sat, 8 Feb 2003, Gert Vervoort wrote:
> >Trick Modes? (ff, rew)
> >
> Trick modes are a decoder issue. Does iTVC15 also have a MPEG decoder?
Yes, it does, but the trick modes API call is in the encoder section not sure
why. (BTW, the '16 is encode only)
> Gert
John
--
video4linux-list
Gert Vervoort writes:
> PlasmaJohn wrote:
> This also a valid value. (althoug not support by SAA6752, which is fixed
> to 48kHz).
>
> >Trick Modes? (ff, rew)
> >
> Trick modes are a decoder issue. Does iTVC15 also have a MPEG decoder?
>
> This raises a different topic, as my list was e
PlasmaJohn wrote:
I'm not real familiar with the MPEG specs either, but most of what you
enumerated here (and your next message) looks supportable by the iTVC15. I
don't remember any settings for the quantizer, but that may be a
register/mmio level operation which I don't have docs for.
The
Gunther Mayer wrote:
Mike Wohlgemuth wrote:
I forgot to mention that using tuner type 2 didn't work for me, either.
Actually, tuner=2 is correct and works fine for you (see your 1st mail).
The "channel off by one" can easily be explained by using a buggy
or a wrong channel scheme.
The off
On Fri, 7 Feb 2003, Gert Vervoort wrote:
> It is also very likely that not all of these settings are supported by
> other MPEG encoders or that other MPEG encoders have also other
> parameters available.
>
> In practice some parameters can also be fixed, depening on a type of
> system stream o
Mike Wohlgemuth wrote:
Mike Wohlgemuth wrote:
The thread never went anywhere, having only 2 messages, with the
second being a request to peel away the Leadtek sticker and finding
out what sort of tuner it really was. I've done that, and it appears
to be Philips FM1236/PH, but it was just on
Hi Gerd,
On Sat, 2003-02-08 at 12:22, Gerd Knorr wrote:
> struct v4l2_compression
[..]
> #define VIDIOC_G_COMP _IOR ('V', 6, struct v4l2_compression)
> #define VIDIOC_S_COMP _IOW ('V', 7, struct v4l2_compression)
when you're actually going to use, it might be a good idea to re
Forgot that some encoders also support MPEG-1.
And also most MPEG encoders do have a from of noise reduction, but this
is very encoder specific.
Gert
system stream:
- type: elementary stream(ES), packatised elementary stream(s) (PES)
program stream(PS), transport stream(TS)
(MPEG-1 systems
Marcus Metzler <[EMAIL PROTECTED]> writes:
> since we are not experts concerning the variuos MPEG settings and did
/me too.
> So if this is going to be done for V4L2, maybe we could start on this
> list. A good start for a parameter list would probably be the .par
> files for mpegenc.
videodev
Hi Daniel,
On Sat, 2003-02-08 at 05:48, Daniel Moone wrote:
> Originally, I had xawtv-3.74 which was the newest RH8 xawtv rpm at
> rpmfind.net and that worked but the tuner didn't. I had dual boot to win98
> to change channels. So I thought I'd try 3.84. Now, no xawtv :(
[..]
> bttv0: using: B
17 matches
Mail list logo
