Hi,
I run Voyage 0.7.0 on a alix board. I attach two usb disk.
I add to /etc/fstab:
UUID=d2482476-9ff8-4fec-a2b6-10269065d585 /mnt/hdd1 ext4 defaults 0 0
UUID=ec240b7a-a890-44da-b84f-0e5530c0eea7 /mnt/hdd2 ext4 defaults 0 0
With the command: "mount -a" everything works as I expect, but when
the
PS This is already the fourth time I'm trying to post this message into this
f...ng mail list. First 2 times I got - The following address(es) failed:
voyage-linux@list.voyage.hk, third time the message has simply gone!!!
Hi,
I have a HUAWEI E160 UMTS modem. It is recognized by the system and wor
Hi,
I have a HUAWEI E160 UMTS modem. It is recognized by the system and works
correctly but when I disconnect it I got some error message and afterwards the
USB subsystem doesn't work any longer
Here what I have when I connect the device
--
usb 2-1: con
Hi,
I've installed samba and that's why / cannot be remounted from the
/etc/init.d/voyage-util script. The side effect is that the start_leds function
isn't called at all. If one would call this function first in the start method
then it would work.
BTW What is the side effect of not been able to
Hi,
I have one more question
For some reason the following record in the /etc/modules doesn't work
ath_pci xchanmode=0 outdoor=1 countrycode=276
after reboot I still have 11 channels
but calling manually
ifdown ath0
modprobe -r ath_pci
modprobe ath_pci countrycode=276
ifup ath0
does the trick.
Hi,
Have a simple question about LED control. I'm changing the default trigger for
one of the LED's with =echo blah > /sys/class/LED blahblah = but after restart
the default setting is back. I know that I can run a script every time I boot
but maybe there's a strait solution?
Thank you
Gustin Johnson writes:
>
> Mine is the packaged version for 0.6
> >
> >
> Use reply all when replying to messages. Using reply only sends to the
> poster you are replying to.
>
so is mine.
OK, apart from the hostapd problem which is still unresolved I try to connect to
the alix board from a
Gustin Johnson writes:
> Also, kismet is showing your AP as unsecured because hostap is not
> running. If hostap is not running, then kismet is not detecting
> encrypted frames.
Yes, strange that Windows host shows WPA2 enabled AP
> Here are my configs:
> ** note, I have two physical devices i
Gustin Johnson writes:
> Also, kismet is showing your AP as unsecured because hostap is not
> running. If hostap is not running, then kismet is not detecting
> encrypted frames.
Yes, strange that Windows host shows WPA2 enabled AP
> Here are my configs:
> ** note, I have two physical devices i
Gustin Johnson writes:
> Has the ath0 device been created?
>
> run iwconfig with no arguments. If you do not see ath0 then the device
> is not being created properly.
>
> I also have my athX device as part of a bridge, which I needed to
> specify in the hostapd.conf.
>
> > wpa_pairwise=TKIP C
Gustin Johnson writes:
> Has the ath0 device been created?
>
> run iwconfig with no arguments. If you do not see ath0 then the device
> is not being created properly.
>
> I also have my athX device as part of a bridge, which I needed to
> specify in the hostapd.conf.
>
> > wpa_pairwise=TKIP C
here is my iwconfig
---
voyage:~# iwconfig
lono wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
eth2 no wireless extensions.
wifi0 no wireless extensions.
br0 no wireless extens
Hi,
I'm having problem trying to start hostapt on an Alix.2d3 board with an Atheros
wifi card (AR5213 chipset)
I'm able to turn the wifi interface into managed mode and I can see the unsecure
Access Point (canno't connect to it though). But when I try to start the hostapd
I always get the followi
Any information is welcomed.
Thank you
Alex
___
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
14 matches
Mail list logo
